| Message ID | 1438848559-232109-2-git-send-email-wangzhou1@hisilicon.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
[+cc jingoohan1@gmail.com] On 2015/8/6 16:09, Zhou Wang wrote: > From: gabriele paoloni <gabriele.paoloni@huawei.com> > > Commit f4c55c5a3f7f "PCI: designware: Program ATU with untranslated > address" added the calculation of PCI BUS addresses in designware, > storing them in new fields added in "struct pcie_port". This > calculation is done for every designware user even if is only > applicable to DRA7xx. > This patch moves the calculation of the bus addresses to the DRA7xx > driver and is needed to allow the rework of designware to use > the new DT parsing API. > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> > --- > drivers/pci/host/pci-dra7xx.c | 13 +++++++++++++ > drivers/pci/host/pcie-designware.c | 15 ++++----------- > 2 files changed, 17 insertions(+), 11 deletions(-) > > diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c > index 80db09e..18ae7ff 100644 > --- a/drivers/pci/host/pci-dra7xx.c > +++ b/drivers/pci/host/pci-dra7xx.c > @@ -61,6 +61,7 @@ > > #define PCIECTRL_DRA7XX_CONF_PHY_CS 0x010C > #define LINK_UP BIT(16) > +#define CPU_TO_BUS_ADDR 0x0FFFFFFF > > struct dra7xx_pcie { > void __iomem *base; > @@ -139,6 +140,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp) > static void dra7xx_pcie_host_init(struct pcie_port *pp) > { > dw_pcie_setup_rc(pp); > + > + if (pp->io_mod_base) > + pp->io_mod_base &= CPU_TO_BUS_ADDR; > + > + if (pp->mem_mod_base) > + pp->mem_mod_base &= CPU_TO_BUS_ADDR; > + > + if (pp->cfg0_mod_base) { > + pp->cfg0_mod_base &= CPU_TO_BUS_ADDR; > + pp->cfg1_mod_base &= CPU_TO_BUS_ADDR; > + } > + > dra7xx_pcie_establish_link(pp); > if (IS_ENABLED(CONFIG_PCI_MSI)) > dw_pcie_msi_init(pp); > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c > index 69486be..c5d407c 100644 > --- a/drivers/pci/host/pcie-designware.c > +++ b/drivers/pci/host/pcie-designware.c > @@ -366,14 +366,10 @@ int dw_pcie_host_init(struct pcie_port *pp) > struct of_pci_range range; > struct of_pci_range_parser parser; > struct resource *cfg_res; > - u32 val, na, ns; > + u32 val, ns; > const __be32 *addrp; > int i, index, ret; > > - /* Find the address cell size and the number of cells in order to get > - * the untranslated address. > - */ > - of_property_read_u32(np, "#address-cells", &na); > ns = of_n_size_cells(np); > > cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); > @@ -416,8 +412,7 @@ int dw_pcie_host_init(struct pcie_port *pp) > pp->io_base = range.cpu_addr; > > /* Find the untranslated IO space address */ > - pp->io_mod_base = of_read_number(parser.range - > - parser.np + na, ns); > + pp->io_mod_base = range.cpu_addr; > } > if (restype == IORESOURCE_MEM) { > of_pci_range_to_resource(&range, np, &pp->mem); > @@ -426,8 +421,7 @@ int dw_pcie_host_init(struct pcie_port *pp) > pp->mem_bus_addr = range.pci_addr; > > /* Find the untranslated MEM space address */ > - pp->mem_mod_base = of_read_number(parser.range - > - parser.np + na, ns); > + pp->mem_mod_base = range.cpu_addr; > } > if (restype == 0) { > of_pci_range_to_resource(&range, np, &pp->cfg); > @@ -437,8 +431,7 @@ int dw_pcie_host_init(struct pcie_port *pp) > pp->cfg1_base = pp->cfg.start + pp->cfg0_size; > > /* Find the untranslated configuration space address */ > - pp->cfg0_mod_base = of_read_number(parser.range - > - parser.np + na, ns); > + pp->cfg0_mod_base = range.cpu_addr; > pp->cfg1_mod_base = pp->cfg0_mod_base + > pp->cfg0_size; > } > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[+cc jingoohan1@gmail.com] On 2015/8/6 16:09, Zhou Wang wrote: > From: gabriele paoloni <gabriele.paoloni@huawei.com> > > Commit f4c55c5a3f7f "PCI: designware: Program ATU with untranslated > address" added the calculation of PCI BUS addresses in designware, > storing them in new fields added in "struct pcie_port". This > calculation is done for every designware user even if is only > applicable to DRA7xx. > This patch moves the calculation of the bus addresses to the DRA7xx > driver and is needed to allow the rework of designware to use > the new DT parsing API. > > Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> > Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> > --- > drivers/pci/host/pci-dra7xx.c | 13 +++++++++++++ > drivers/pci/host/pcie-designware.c | 15 ++++----------- > 2 files changed, 17 insertions(+), 11 deletions(-) > > diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c > index 80db09e..18ae7ff 100644 > --- a/drivers/pci/host/pci-dra7xx.c > +++ b/drivers/pci/host/pci-dra7xx.c > @@ -61,6 +61,7 @@ > > #define PCIECTRL_DRA7XX_CONF_PHY_CS 0x010C > #define LINK_UP BIT(16) > +#define CPU_TO_BUS_ADDR 0x0FFFFFFF > > struct dra7xx_pcie { > void __iomem *base; > @@ -139,6 +140,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp) > static void dra7xx_pcie_host_init(struct pcie_port *pp) > { > dw_pcie_setup_rc(pp); > + > + if (pp->io_mod_base) > + pp->io_mod_base &= CPU_TO_BUS_ADDR; > + > + if (pp->mem_mod_base) > + pp->mem_mod_base &= CPU_TO_BUS_ADDR; > + > + if (pp->cfg0_mod_base) { > + pp->cfg0_mod_base &= CPU_TO_BUS_ADDR; > + pp->cfg1_mod_base &= CPU_TO_BUS_ADDR; > + } > + > dra7xx_pcie_establish_link(pp); > if (IS_ENABLED(CONFIG_PCI_MSI)) > dw_pcie_msi_init(pp); > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c > index 69486be..c5d407c 100644 > --- a/drivers/pci/host/pcie-designware.c > +++ b/drivers/pci/host/pcie-designware.c > @@ -366,14 +366,10 @@ int dw_pcie_host_init(struct pcie_port *pp) > struct of_pci_range range; > struct of_pci_range_parser parser; > struct resource *cfg_res; > - u32 val, na, ns; > + u32 val, ns; > const __be32 *addrp; > int i, index, ret; > > - /* Find the address cell size and the number of cells in order to get > - * the untranslated address. > - */ > - of_property_read_u32(np, "#address-cells", &na); > ns = of_n_size_cells(np); > > cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); > @@ -416,8 +412,7 @@ int dw_pcie_host_init(struct pcie_port *pp) > pp->io_base = range.cpu_addr; > > /* Find the untranslated IO space address */ > - pp->io_mod_base = of_read_number(parser.range - > - parser.np + na, ns); > + pp->io_mod_base = range.cpu_addr; > } > if (restype == IORESOURCE_MEM) { > of_pci_range_to_resource(&range, np, &pp->mem); > @@ -426,8 +421,7 @@ int dw_pcie_host_init(struct pcie_port *pp) > pp->mem_bus_addr = range.pci_addr; > > /* Find the untranslated MEM space address */ > - pp->mem_mod_base = of_read_number(parser.range - > - parser.np + na, ns); > + pp->mem_mod_base = range.cpu_addr; > } > if (restype == 0) { > of_pci_range_to_resource(&range, np, &pp->cfg); > @@ -437,8 +431,7 @@ int dw_pcie_host_init(struct pcie_port *pp) > pp->cfg1_base = pp->cfg.start + pp->cfg0_size; > > /* Find the untranslated configuration space address */ > - pp->cfg0_mod_base = of_read_number(parser.range - > - parser.np + na, ns); > + pp->cfg0_mod_base = range.cpu_addr; > pp->cfg1_mod_base = pp->cfg0_mod_base + > pp->cfg0_size; > } > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Aug 7, 2015 at 11:34 AM, Zhou Wang <wangzhou1@hisilicon.com> wrote: > [+cc jingoohan1@gmail.com] > > On 2015/8/6 16:09, Zhou Wang wrote: >> From: gabriele paoloni <gabriele.paoloni@huawei.com> >> >> Commit f4c55c5a3f7f "PCI: designware: Program ATU with untranslated >> address" added the calculation of PCI BUS addresses in designware, >> storing them in new fields added in "struct pcie_port". This >> calculation is done for every designware user even if is only >> applicable to DRA7xx. >> This patch moves the calculation of the bus addresses to the DRA7xx >> driver and is needed to allow the rework of designware to use >> the new DT parsing API. >> >> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> >> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Looks fine to me Acked-by: Pratyush Anand <pratyush.anand@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c index 80db09e..18ae7ff 100644 --- a/drivers/pci/host/pci-dra7xx.c +++ b/drivers/pci/host/pci-dra7xx.c @@ -61,6 +61,7 @@ #define PCIECTRL_DRA7XX_CONF_PHY_CS 0x010C #define LINK_UP BIT(16) +#define CPU_TO_BUS_ADDR 0x0FFFFFFF struct dra7xx_pcie { void __iomem *base; @@ -139,6 +140,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp) static void dra7xx_pcie_host_init(struct pcie_port *pp) { dw_pcie_setup_rc(pp); + + if (pp->io_mod_base) + pp->io_mod_base &= CPU_TO_BUS_ADDR; + + if (pp->mem_mod_base) + pp->mem_mod_base &= CPU_TO_BUS_ADDR; + + if (pp->cfg0_mod_base) { + pp->cfg0_mod_base &= CPU_TO_BUS_ADDR; + pp->cfg1_mod_base &= CPU_TO_BUS_ADDR; + } + dra7xx_pcie_establish_link(pp); if (IS_ENABLED(CONFIG_PCI_MSI)) dw_pcie_msi_init(pp); diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 69486be..c5d407c 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -366,14 +366,10 @@ int dw_pcie_host_init(struct pcie_port *pp) struct of_pci_range range; struct of_pci_range_parser parser; struct resource *cfg_res; - u32 val, na, ns; + u32 val, ns; const __be32 *addrp; int i, index, ret; - /* Find the address cell size and the number of cells in order to get - * the untranslated address. - */ - of_property_read_u32(np, "#address-cells", &na); ns = of_n_size_cells(np); cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config"); @@ -416,8 +412,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->io_base = range.cpu_addr; /* Find the untranslated IO space address */ - pp->io_mod_base = of_read_number(parser.range - - parser.np + na, ns); + pp->io_mod_base = range.cpu_addr; } if (restype == IORESOURCE_MEM) { of_pci_range_to_resource(&range, np, &pp->mem); @@ -426,8 +421,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->mem_bus_addr = range.pci_addr; /* Find the untranslated MEM space address */ - pp->mem_mod_base = of_read_number(parser.range - - parser.np + na, ns); + pp->mem_mod_base = range.cpu_addr; } if (restype == 0) { of_pci_range_to_resource(&range, np, &pp->cfg); @@ -437,8 +431,7 @@ int dw_pcie_host_init(struct pcie_port *pp) pp->cfg1_base = pp->cfg.start + pp->cfg0_size; /* Find the untranslated configuration space address */ - pp->cfg0_mod_base = of_read_number(parser.range - - parser.np + na, ns); + pp->cfg0_mod_base = range.cpu_addr; pp->cfg1_mod_base = pp->cfg0_mod_base + pp->cfg0_size; }