Message ID | 1438748696-28452-3-git-send-email-mranostay@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, Aug 04, 2015 at 09:24:56PM -0700, Matt Ranostay wrote: > Several cap11xx variants have LEDs that be can be controlled, this > patchset implements this functionality. > > Signed-off-by: Matt Ranostay <mranostay@gmail.com> Folded both together and applied with minor edits, thank you. > --- > drivers/input/keyboard/cap11xx.c | 140 ++++++++++++++++++++++++++++++++++++++- > 1 file changed, 137 insertions(+), 3 deletions(-) > > diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c > index b58fd9d..64d0079 100644 > --- a/drivers/input/keyboard/cap11xx.c > +++ b/drivers/input/keyboard/cap11xx.c > @@ -12,6 +12,7 @@ > #include <linux/module.h> > #include <linux/interrupt.h> > #include <linux/input.h> > +#include <linux/leds.h> > #include <linux/of_irq.h> > #include <linux/regmap.h> > #include <linux/i2c.h> > @@ -47,6 +48,20 @@ > #define CAP11XX_REG_CONFIG2 0x44 > #define CAP11XX_REG_CONFIG2_ALT_POL BIT(6) > #define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) > +#define CAP11XX_REG_LED_POLARITY 0x73 > +#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74 > + > +#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90 > +#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91 > +#define CAP11XX_REG_LED_DUTY_CYCLE_3 0x92 > +#define CAP11XX_REG_LED_DUTY_CYCLE_4 0x93 > + > +#define CAP11XX_REG_LED_DUTY_MIN_MASK (0x0f) > +#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT (0) > +#define CAP11XX_REG_LED_DUTY_MAX_MASK (0xf0) > +#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT (4) > +#define CAP11XX_REG_LED_DUTY_MAX_VALUE (15) > + > #define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X)) > #define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9 > #define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba > @@ -56,10 +71,23 @@ > > #define CAP11XX_MANUFACTURER_ID 0x5d > > +#ifdef CONFIG_LEDS_CLASS > +struct cap11xx_led { > + struct cap11xx_priv *priv; > + struct led_classdev cdev; > + struct work_struct work; > + u32 reg; > + enum led_brightness new_brightness; > +}; > +#endif > + > struct cap11xx_priv { > struct regmap *regmap; > struct input_dev *idev; > > + struct cap11xx_led *leds; > + int num_leds; > + > /* config */ > u32 keycodes[]; > }; > @@ -67,6 +95,7 @@ struct cap11xx_priv { > struct cap11xx_hw_model { > u8 product_id; > unsigned int num_channels; > + unsigned int num_leds; > }; > > enum { > @@ -76,9 +105,9 @@ enum { > }; > > static const struct cap11xx_hw_model cap11xx_devices[] = { > - [CAP1106] = { .product_id = 0x55, .num_channels = 6 }, > - [CAP1126] = { .product_id = 0x53, .num_channels = 6 }, > - [CAP1188] = { .product_id = 0x50, .num_channels = 8 }, > + [CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0 }, > + [CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2 }, > + [CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8 }, > }; > > static const struct reg_default cap11xx_reg_defaults[] = { > @@ -111,6 +140,7 @@ static const struct reg_default cap11xx_reg_defaults[] = { > { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 }, > { CAP11XX_REG_STANDBY_THRESH, 0x40 }, > { CAP11XX_REG_CONFIG2, 0x40 }, > + { CAP11XX_REG_LED_POLARITY, 0x00 }, > { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 }, > { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 }, > }; > @@ -177,6 +207,13 @@ out: > > static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep) > { > +#ifdef CONFIG_LEDS_CLASS > + /* > + * DLSEEP mode will turn off all LEDS, prevent this > + */ > + if (priv->num_leds) > + return 0; > +#endif > return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, > CAP11XX_REG_MAIN_CONTROL_DLSEEP, > sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0); > @@ -196,6 +233,99 @@ static void cap11xx_input_close(struct input_dev *idev) > cap11xx_set_sleep(priv, true); > } > > +#ifdef CONFIG_LEDS_CLASS > +static void cap11xx_led_work(struct work_struct *work) > +{ > + struct cap11xx_led *led = container_of(work, struct cap11xx_led, work); > + struct cap11xx_priv *priv = led->priv; > + int value = led->new_brightness; > + > + /* > + * All LEDs share the same duty cycle as this is a HW limitation. > + * Brightness levels per LED are either 0 (OFF) and 1 (ON). > + */ > + regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL, > + BIT(led->reg), value ? BIT(led->reg) : 0); > +} > + > +static void cap11xx_led_set(struct led_classdev *cdev, > + enum led_brightness value) > +{ > + struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); > + > + if (led->new_brightness == value) > + return; > + > + led->new_brightness = value; > + schedule_work(&led->work); > +} > + > +static int cap11xx_init_leds(struct device *dev, > + struct cap11xx_priv *priv, int num_leds) > +{ > + struct device_node *node = dev->of_node, *child; > + struct cap11xx_led *led; > + int cnt = of_get_child_count(node); > + int error; > + > + if (!num_leds || !cnt) > + return 0; > + if (cnt > num_leds) > + return -EINVAL; > + > + led = devm_kcalloc(dev, cnt, > + sizeof(struct cap11xx_led), GFP_KERNEL); > + if (!led) > + return -ENOMEM; > + priv->leds = led; > + > + error = regmap_update_bits(priv->regmap, > + CAP11XX_REG_LED_OUTPUT_CONTROL, 0xff, 0); > + if (error) > + return error; > + error = regmap_update_bits(priv->regmap, CAP11XX_REG_LED_DUTY_CYCLE_4, > + CAP11XX_REG_LED_DUTY_MAX_MASK, > + CAP11XX_REG_LED_DUTY_MAX_VALUE << > + CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT); > + if (error) > + return error; > + > + for_each_child_of_node(node, child) { > + u32 reg; > + > + led->cdev.name = > + of_get_property(child, "label", NULL) ? : child->name; > + led->cdev.default_trigger = > + of_get_property(child, "linux,default-trigger", NULL); > + led->cdev.flags = 0; > + led->cdev.brightness_set = cap11xx_led_set; > + led->cdev.max_brightness = 1; > + led->cdev.brightness = LED_OFF; > + > + error = of_property_read_u32(child, "reg", ®); > + if (error != 0 || reg >= num_leds) > + return -EINVAL; > + led->reg = reg; > + led->priv = priv; > + > + INIT_WORK(&led->work, cap11xx_led_work); > + error = devm_led_classdev_register(dev, &led->cdev); > + if (error < 0) > + return -EINVAL; > + priv->num_leds++; > + led++; > + }; > + > + return 0; > +} > +#else > +static int cap11xx_init_leds(struct device *dev, > + struct cap11xx_priv *priv, int num_leds) > +{ > + return 0; > +} > +#endif > + > static int cap11xx_i2c_probe(struct i2c_client *i2c_client, > const struct i2c_device_id *id) > { > @@ -316,6 +446,10 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, > priv->idev->open = cap11xx_input_open; > priv->idev->close = cap11xx_input_close; > > + error = cap11xx_init_leds(dev, priv, cap->num_leds); > + if (error) > + return error; > + > input_set_drvdata(priv->idev, priv); > > /* > -- > 1.9.1 >
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c index b58fd9d..64d0079 100644 --- a/drivers/input/keyboard/cap11xx.c +++ b/drivers/input/keyboard/cap11xx.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/input.h> +#include <linux/leds.h> #include <linux/of_irq.h> #include <linux/regmap.h> #include <linux/i2c.h> @@ -47,6 +48,20 @@ #define CAP11XX_REG_CONFIG2 0x44 #define CAP11XX_REG_CONFIG2_ALT_POL BIT(6) #define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) +#define CAP11XX_REG_LED_POLARITY 0x73 +#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74 + +#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90 +#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91 +#define CAP11XX_REG_LED_DUTY_CYCLE_3 0x92 +#define CAP11XX_REG_LED_DUTY_CYCLE_4 0x93 + +#define CAP11XX_REG_LED_DUTY_MIN_MASK (0x0f) +#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT (0) +#define CAP11XX_REG_LED_DUTY_MAX_MASK (0xf0) +#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT (4) +#define CAP11XX_REG_LED_DUTY_MAX_VALUE (15) + #define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X)) #define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9 #define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba @@ -56,10 +71,23 @@ #define CAP11XX_MANUFACTURER_ID 0x5d +#ifdef CONFIG_LEDS_CLASS +struct cap11xx_led { + struct cap11xx_priv *priv; + struct led_classdev cdev; + struct work_struct work; + u32 reg; + enum led_brightness new_brightness; +}; +#endif + struct cap11xx_priv { struct regmap *regmap; struct input_dev *idev; + struct cap11xx_led *leds; + int num_leds; + /* config */ u32 keycodes[]; }; @@ -67,6 +95,7 @@ struct cap11xx_priv { struct cap11xx_hw_model { u8 product_id; unsigned int num_channels; + unsigned int num_leds; }; enum { @@ -76,9 +105,9 @@ enum { }; static const struct cap11xx_hw_model cap11xx_devices[] = { - [CAP1106] = { .product_id = 0x55, .num_channels = 6 }, - [CAP1126] = { .product_id = 0x53, .num_channels = 6 }, - [CAP1188] = { .product_id = 0x50, .num_channels = 8 }, + [CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0 }, + [CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2 }, + [CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8 }, }; static const struct reg_default cap11xx_reg_defaults[] = { @@ -111,6 +140,7 @@ static const struct reg_default cap11xx_reg_defaults[] = { { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 }, { CAP11XX_REG_STANDBY_THRESH, 0x40 }, { CAP11XX_REG_CONFIG2, 0x40 }, + { CAP11XX_REG_LED_POLARITY, 0x00 }, { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 }, { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 }, }; @@ -177,6 +207,13 @@ out: static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep) { +#ifdef CONFIG_LEDS_CLASS + /* + * DLSEEP mode will turn off all LEDS, prevent this + */ + if (priv->num_leds) + return 0; +#endif return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, CAP11XX_REG_MAIN_CONTROL_DLSEEP, sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0); @@ -196,6 +233,99 @@ static void cap11xx_input_close(struct input_dev *idev) cap11xx_set_sleep(priv, true); } +#ifdef CONFIG_LEDS_CLASS +static void cap11xx_led_work(struct work_struct *work) +{ + struct cap11xx_led *led = container_of(work, struct cap11xx_led, work); + struct cap11xx_priv *priv = led->priv; + int value = led->new_brightness; + + /* + * All LEDs share the same duty cycle as this is a HW limitation. + * Brightness levels per LED are either 0 (OFF) and 1 (ON). + */ + regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL, + BIT(led->reg), value ? BIT(led->reg) : 0); +} + +static void cap11xx_led_set(struct led_classdev *cdev, + enum led_brightness value) +{ + struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); + + if (led->new_brightness == value) + return; + + led->new_brightness = value; + schedule_work(&led->work); +} + +static int cap11xx_init_leds(struct device *dev, + struct cap11xx_priv *priv, int num_leds) +{ + struct device_node *node = dev->of_node, *child; + struct cap11xx_led *led; + int cnt = of_get_child_count(node); + int error; + + if (!num_leds || !cnt) + return 0; + if (cnt > num_leds) + return -EINVAL; + + led = devm_kcalloc(dev, cnt, + sizeof(struct cap11xx_led), GFP_KERNEL); + if (!led) + return -ENOMEM; + priv->leds = led; + + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_LED_OUTPUT_CONTROL, 0xff, 0); + if (error) + return error; + error = regmap_update_bits(priv->regmap, CAP11XX_REG_LED_DUTY_CYCLE_4, + CAP11XX_REG_LED_DUTY_MAX_MASK, + CAP11XX_REG_LED_DUTY_MAX_VALUE << + CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT); + if (error) + return error; + + for_each_child_of_node(node, child) { + u32 reg; + + led->cdev.name = + of_get_property(child, "label", NULL) ? : child->name; + led->cdev.default_trigger = + of_get_property(child, "linux,default-trigger", NULL); + led->cdev.flags = 0; + led->cdev.brightness_set = cap11xx_led_set; + led->cdev.max_brightness = 1; + led->cdev.brightness = LED_OFF; + + error = of_property_read_u32(child, "reg", ®); + if (error != 0 || reg >= num_leds) + return -EINVAL; + led->reg = reg; + led->priv = priv; + + INIT_WORK(&led->work, cap11xx_led_work); + error = devm_led_classdev_register(dev, &led->cdev); + if (error < 0) + return -EINVAL; + priv->num_leds++; + led++; + }; + + return 0; +} +#else +static int cap11xx_init_leds(struct device *dev, + struct cap11xx_priv *priv, int num_leds) +{ + return 0; +} +#endif + static int cap11xx_i2c_probe(struct i2c_client *i2c_client, const struct i2c_device_id *id) { @@ -316,6 +446,10 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client, priv->idev->open = cap11xx_input_open; priv->idev->close = cap11xx_input_close; + error = cap11xx_init_leds(dev, priv, cap->num_leds); + if (error) + return error; + input_set_drvdata(priv->idev, priv); /*
Several cap11xx variants have LEDs that be can be controlled, this patchset implements this functionality. Signed-off-by: Matt Ranostay <mranostay@gmail.com> --- drivers/input/keyboard/cap11xx.c | 140 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 137 insertions(+), 3 deletions(-)