| Message ID | a960c538cf419a816d73fbea7d4380ea773aa6ba.1440162473.git.maitysanchayan@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 2015-08-21 06:26, Sanchayan Maity wrote: > Add device tree node for touchscreen support on Colibri VF50. The > touchscreen functionality on VF50 uses the ADC channels of Vybrid > and some GPIOs. Also add pinctrl nodes for proper pinmux. > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> > --- > arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 4 +++ > arch/arm/boot/dts/vf500-colibri.dtsi | 47 +++++++++++++++++++++++++++++ > 2 files changed, 51 insertions(+) > > diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > index 7fc782c..14c0b00 100644 > --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > @@ -15,3 +15,7 @@ > model = "Toradex Colibri VF50 on Colibri Evaluation Board"; > compatible = "toradex,vf500-colibri_vf50-on-eval", > "toradex,vf500-colibri_vf50", "fsl,vf500"; > }; > + > +&touchscreen { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi > b/arch/arm/boot/dts/vf500-colibri.dtsi > index cee34a3..84f091d 100644 > --- a/arch/arm/boot/dts/vf500-colibri.dtsi > +++ b/arch/arm/boot/dts/vf500-colibri.dtsi > @@ -17,4 +17,51 @@ > memory { > reg = <0x80000000 0x8000000>; > }; > + > + touchscreen: vf50-touchscreen { > + compatible = "toradex,vf50-touchscreen"; > + io-channels = <&adc1 0>,<&adc0 0>, > + <&adc0 1>,<&adc1 2>; > + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; > + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; > + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; > + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; > + interrupt-parent = <&gpio0>; > + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; > + pinctrl-names = "idle","default","gpios"; > + pinctrl-0 = <&pinctrl_touchctrl_idle>; > + pinctrl-1 = <&pinctrl_touchctrl_default>; > + pinctrl-2 = <&pinctrl_touchctrl_gpios>; > + vf50-ts-min-pressure = <200>; Since this is a touch screen related property, we even would want to have that in the board specific device-tree (vf500-colibri-eval-v3.dts). -- Stefan
On 15-08-22 18:54:28, Stefan Agner wrote: > On 2015-08-21 06:26, Sanchayan Maity wrote: > > Add device tree node for touchscreen support on Colibri VF50. The > > touchscreen functionality on VF50 uses the ADC channels of Vybrid > > and some GPIOs. Also add pinctrl nodes for proper pinmux. > > > > Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> > > --- > > arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 4 +++ > > arch/arm/boot/dts/vf500-colibri.dtsi | 47 +++++++++++++++++++++++++++++ > > 2 files changed, 51 insertions(+) > > > > diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > > b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > > index 7fc782c..14c0b00 100644 > > --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > > +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts > > @@ -15,3 +15,7 @@ > > model = "Toradex Colibri VF50 on Colibri Evaluation Board"; > > compatible = "toradex,vf500-colibri_vf50-on-eval", > > "toradex,vf500-colibri_vf50", "fsl,vf500"; > > }; > > + > > +&touchscreen { > > + status = "okay"; > > +}; > > diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi > > b/arch/arm/boot/dts/vf500-colibri.dtsi > > index cee34a3..84f091d 100644 > > --- a/arch/arm/boot/dts/vf500-colibri.dtsi > > +++ b/arch/arm/boot/dts/vf500-colibri.dtsi > > @@ -17,4 +17,51 @@ > > memory { > > reg = <0x80000000 0x8000000>; > > }; > > + > > + touchscreen: vf50-touchscreen { > > + compatible = "toradex,vf50-touchscreen"; > > + io-channels = <&adc1 0>,<&adc0 0>, > > + <&adc0 1>,<&adc1 2>; > > + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; > > + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; > > + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; > > + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; > > + interrupt-parent = <&gpio0>; > > + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; > > + pinctrl-names = "idle","default","gpios"; > > + pinctrl-0 = <&pinctrl_touchctrl_idle>; > > + pinctrl-1 = <&pinctrl_touchctrl_default>; > > + pinctrl-2 = <&pinctrl_touchctrl_gpios>; > > + vf50-ts-min-pressure = <200>; > > Since this is a touch screen related property, we even would want to > have that in the board specific device-tree (vf500-colibri-eval-v3.dts). So the same property specified again in vf500-colibri-eval-v3.dts? Ok will include the same. - Sanchayan.
diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index 7fc782c..14c0b00 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -15,3 +15,7 @@ model = "Toradex Colibri VF50 on Colibri Evaluation Board"; compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500"; }; + +&touchscreen { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index cee34a3..84f091d 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -17,4 +17,51 @@ memory { reg = <0x80000000 0x8000000>; }; + + touchscreen: vf50-touchscreen { + compatible = "toradex,vf50-touchscreen"; + io-channels = <&adc1 0>,<&adc0 0>, + <&adc0 1>,<&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "idle","default","gpios"; + pinctrl-0 = <&pinctrl_touchctrl_idle>; + pinctrl-1 = <&pinctrl_touchctrl_default>; + pinctrl-2 = <&pinctrl_touchctrl_gpios>; + vf50-ts-min-pressure = <200>; + status = "disabled"; + }; +}; + +&iomuxc { + vf610-colibri { + pinctrl_touchctrl_idle: touchctrl_idle { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x006d + VF610_PAD_PTA19__GPIO_9 0x006c + >; + }; + + pinctrl_touchctrl_default: touchctrl_default { + fsl,pins = < + VF610_PAD_PTA18__ADC0_SE0 0x0040 + VF610_PAD_PTA19__ADC0_SE1 0x0040 + VF610_PAD_PTA16__ADC1_SE0 0x0040 + VF610_PAD_PTB2__ADC1_SE2 0x0040 + >; + }; + + pinctrl_touchctrl_gpios: touchctrl_gpios { + fsl,pins = < + VF610_PAD_PTA23__GPIO_13 0x22e9 + VF610_PAD_PTB23__GPIO_93 0x22e9 + VF610_PAD_PTA22__GPIO_12 0x22e9 + VF610_PAD_PTA11__GPIO_4 0x22e9 + >; + }; + }; };
Add device tree node for touchscreen support on Colibri VF50. The touchscreen functionality on VF50 uses the ADC channels of Vybrid and some GPIOs. Also add pinctrl nodes for proper pinmux. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> --- arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 4 +++ arch/arm/boot/dts/vf500-colibri.dtsi | 47 +++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+)