| Message ID | 1441643058-8641-1-git-send-email-javier@osg.samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
2015-09-07 18:24 GMT+02:00 Javier Martinez Canillas <javier@osg.samsung.com>: > Only the IGEPv2 boards have a LAN9221i chip connected to the GPMC > so the pinmux configuration for the GPIO connected to the IRQ line > of the LAN chip should not be defined in the IGEP common dtsi but > in the one common to the IGEPv2 boards. > > While there, use the OMAP3_CORE1_IOPAD() macro for the padconf reg. > > Suggested-by: Ladislav Michl <ladis@linux-mips.org> > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> > > --- > > arch/arm/boot/dts/omap3-igep.dtsi | 6 ------ > arch/arm/boot/dts/omap3-igep0020-common.dtsi | 6 ++++++ > 2 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi > index d5e5cd449b16..2230e1c03320 100644 > --- a/arch/arm/boot/dts/omap3-igep.dtsi > +++ b/arch/arm/boot/dts/omap3-igep.dtsi > @@ -78,12 +78,6 @@ > >; > }; > > - smsc9221_pins: pinmux_smsc9221_pins { > - pinctrl-single,pins = < > - 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ > - >; > - }; > - > i2c1_pins: pinmux_i2c1_pins { > pinctrl-single,pins = < > 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ > diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi > index e458c2185e3c..5ad688c57a00 100644 > --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi > +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi > @@ -156,6 +156,12 @@ > OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ > >; > }; > + > + smsc9221_pins: pinmux_smsc9221_pins { > + pinctrl-single,pins = < > + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ > + >; > + }; > }; > > &omap3_pmx_core2 { > -- > 2.4.3 > Looks good to me. Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Enric Balletbo Serra <eballetbo@gmail.com> [150907 12:43]: > 2015-09-07 18:24 GMT+02:00 Javier Martinez Canillas <javier@osg.samsung.com>: > > Only the IGEPv2 boards have a LAN9221i chip connected to the GPMC > > so the pinmux configuration for the GPIO connected to the IRQ line > > of the LAN chip should not be defined in the IGEP common dtsi but > > in the one common to the IGEPv2 boards. > > > > While there, use the OMAP3_CORE1_IOPAD() macro for the padconf reg. > > > > Suggested-by: Ladislav Michl <ladis@linux-mips.org> > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> ... > > Looks good to me. > > Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Applying into omap-for-v4.3/fixes thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index d5e5cd449b16..2230e1c03320 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -78,12 +78,6 @@ >; }; - smsc9221_pins: pinmux_smsc9221_pins { - pinctrl-single,pins = < - 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ - >; - }; - i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index e458c2185e3c..5ad688c57a00 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -156,6 +156,12 @@ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ >; }; + + smsc9221_pins: pinmux_smsc9221_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + >; + }; }; &omap3_pmx_core2 {
Only the IGEPv2 boards have a LAN9221i chip connected to the GPMC so the pinmux configuration for the GPIO connected to the IRQ line of the LAN chip should not be defined in the IGEP common dtsi but in the one common to the IGEPv2 boards. While there, use the OMAP3_CORE1_IOPAD() macro for the padconf reg. Suggested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- arch/arm/boot/dts/omap3-igep.dtsi | 6 ------ arch/arm/boot/dts/omap3-igep0020-common.dtsi | 6 ++++++ 2 files changed, 6 insertions(+), 6 deletions(-)