| Message ID | 20150922203751.GS3175@valkosipuli.retiisi.org.uk (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Sakari, On Wed, Sep 23, 2015 at 4:37 AM, Sakari Ailus <sakari.ailus@iki.fi> wrote: > Hi Robin, > > On Tue, Sep 22, 2015 at 04:37:17PM +0100, Robin Murphy wrote: >> Hi Hans, >> >> On 21/09/15 14:13, Hans Verkuil wrote: >> >Hi Tiffany! >> > >> >On 21-09-15 14:26, Tiffany Lin wrote: >> >>vb2_dc_prepare use the number of SG entries dma_map_sg_attrs return. >> >>But in dma_sync_sg_for_device, it use lengths of each SG entries >> >>before dma_map_sg_attrs. dma_map_sg_attrs will concatenate >> >>SGs until dma length > dma seg bundary. sgt->nents will less than >> >>sgt->orig_nents. Using SG entries after dma_map_sg_attrs >> >>in vb2_dc_prepare will make some SGs are not sync to device. >> >>After add DMA_ATTR_SKIP_CPU_SYNC in vb2_dc_get_userptr to remove >> >>sync data to device twice. Device randomly get incorrect data because >> >>some SGs are not sync to device. Change to use number of SG entries >> >>before dma_map_sg_attrs in vb2_dc_prepare to prevent this issue. >> >> >> >>Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com> >> >>--- >> >> drivers/media/v4l2-core/videobuf2-dma-contig.c | 4 ++-- >> >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> >> >>diff --git a/drivers/media/v4l2-core/videobuf2-dma-contig.c b/drivers/media/v4l2-core/videobuf2-dma-contig.c >> >>index 2397ceb..c5d00bd 100644 >> >>--- a/drivers/media/v4l2-core/videobuf2-dma-contig.c >> >>+++ b/drivers/media/v4l2-core/videobuf2-dma-contig.c >> >>@@ -100,7 +100,7 @@ static void vb2_dc_prepare(void *buf_priv) >> >> if (!sgt || buf->db_attach) >> >> return; >> >> >> >>- dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir); >> >>+ dma_sync_sg_for_device(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir); >> >> } >> >> >> >> static void vb2_dc_finish(void *buf_priv) >> >>@@ -112,7 +112,7 @@ static void vb2_dc_finish(void *buf_priv) >> >> if (!sgt || buf->db_attach) >> >> return; >> >> >> >>- dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->nents, buf->dma_dir); >> >>+ dma_sync_sg_for_cpu(buf->dev, sgt->sgl, sgt->orig_nents, buf->dma_dir); >> >> } >> > >> >I don't really understand it. I am assuming that this happens on an arm and that >> >the dma_map_sg_attrs and dma_sync_sg_* functions used are arm_iommu_map_sg() and >> >arm_iommu_sync_sg_* as implemented in arch/arm/mm/dma-mapping.c. >> > >> >Now, as I understand it (and my understanding may very well be flawed!) the map_sg >> >function concatenates SG entries if possible, so it may return fewer entries. But >> >the dma_sync_sg functions use those updated SG entries, so the full buffer should >> >be covered by this. Using orig_nents will actually sync parts of the buffer twice! >> >The first nents entries already cover the full buffer so any remaining entries up >> >to orig_nents will just duplicate parts of the buffer. >> >> As Documentation/DMA-API.txt says, the parameters to dma_sync_sg_* must be >> the same as those originally passed into dma_map_sg. The segments are only >> merged *from the point of view of the device*: if I have a scatterlist of >> two discontiguous 4K segments, I can remap them with an IOMMU so the device >> sees them as a single 8K buffer, and tell it as such. If on the other hand I >> want to do maintenance from the CPU side (i.e. any DMA API call), then those >> DMA addresses mean nothing and I can only operate on the CPU addresses of >> the underlying pages, which are still very much discontiguous in the linear >> map; ergo I still need to iterate over the original entries. >> >> Whilst I can't claim much familiarity with v4l itself, from a brief look >> over the existing code this patch does look to be doing the right thing. > > Thanks for the explanation. I wonder if this is the only place where we have > this issue. :-I > > I think this might have been partly caused by the unfortunately named field > (nents) in struct sg_table. I wrote a small patch for this (plus a fix for a > few other things as well): > > > From 8928d76db4d45c2b4a16ff90de6695bc88e19779 Mon Sep 17 00:00:00 2001 > From: Sakari Ailus <sakari.ailus@iki.fi> > Date: Tue, 22 Sep 2015 23:30:30 +0300 > Subject: [PATCH 1/1] Documentation: DMA API: Be more explicit that nelems is > always the same > > The nelems argument to the DMA API functions operating on scatterlists is > always the same. The documentation used different argument names and the > matter was not mentioned in Documentation/DMA-API-HOWTO.txt at all. Fix > these. Thanks for this patch! I was very confused by this as well. Can you also fix the following incorrect comments in arch/arm/mm/dma-mapping.c : 1694 /** 1695 * arm_iommu_sync_sg_for_cpu 1696 * @dev: valid struct device pointer 1697 * @sg: list of buffers 1698 * @nents: number of buffers to map (returned from dma_map_sg) 1699 * @dir: DMA transfer direction (same as was passed to dma_map_sg) 1700 */ 1701 void arm_iommu_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, 1712 /** 1713 * arm_iommu_sync_sg_for_device 1714 * @dev: valid struct device pointer 1715 * @sg: list of buffers 1716 * @nents: number of buffers to map (returned from dma_map_sg) 1717 * @dir: DMA transfer direction (same as was passed to dma_map_sg) 1718 */ 1719 void arm_iommu_sync_sg_for_device(struct device *dev, struct scatterlist *sg, In both cases @nents should be * @nents: number of buffers to sync (same as was passed to dma_map_sg) Thanks! -Dan > > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> > --- > Documentation/DMA-API-HOWTO.txt | 5 +++++ > Documentation/DMA-API.txt | 9 +++++---- > 2 files changed, 10 insertions(+), 4 deletions(-) > > diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt > index 55b70b9..d69b3fc 100644 > --- a/Documentation/DMA-API-HOWTO.txt > +++ b/Documentation/DMA-API-HOWTO.txt > @@ -681,6 +681,11 @@ or: > > as appropriate. > > +PLEASE NOTE: The 'nents' argument to dma_sync_sg_for_cpu() and > + dma_sync_sg_for_device() must be the same passed to > + dma_map_sg(). It is _NOT_ the count returned by > + dma_map_sg(). > + > After the last DMA transfer call one of the DMA unmap routines > dma_unmap_{single,sg}(). If you don't touch the data from the first > dma_map_*() call till dma_unmap_*(), then you don't have to call the > diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt > index edccacd..8c832f0 100644 > --- a/Documentation/DMA-API.txt > +++ b/Documentation/DMA-API.txt > @@ -340,14 +340,15 @@ accessed sg->address and sg->length as shown above. > > void > dma_unmap_sg(struct device *dev, struct scatterlist *sg, > - int nhwentries, enum dma_data_direction direction) > + int nents, enum dma_data_direction direction) > > Unmap the previously mapped scatter/gather list. All the parameters > must be the same as those and passed in to the scatter/gather mapping > API. > > Note: <nents> must be the number you passed in, *not* the number of > -DMA address entries returned. > +DMA address entries returned. In struct sg_table this is the field > +called orig_nents. > > void > dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, > @@ -356,10 +357,10 @@ void > dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, > enum dma_data_direction direction) > void > -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, > +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, > enum dma_data_direction direction) > void > -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, > +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, > enum dma_data_direction direction) > > Synchronise a single contiguous or scatter/gather mapping for the CPU > > -- > Kind regards, > > Sakari Ailus > e-mail: sakari.ailus@iki.fi XMPP: sailus@retiisi.org.uk > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/DMA-API-HOWTO.txt b/Documentation/DMA-API-HOWTO.txt index 55b70b9..d69b3fc 100644 --- a/Documentation/DMA-API-HOWTO.txt +++ b/Documentation/DMA-API-HOWTO.txt @@ -681,6 +681,11 @@ or: as appropriate. +PLEASE NOTE: The 'nents' argument to dma_sync_sg_for_cpu() and + dma_sync_sg_for_device() must be the same passed to + dma_map_sg(). It is _NOT_ the count returned by + dma_map_sg(). + After the last DMA transfer call one of the DMA unmap routines dma_unmap_{single,sg}(). If you don't touch the data from the first dma_map_*() call till dma_unmap_*(), then you don't have to call the diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index edccacd..8c832f0 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -340,14 +340,15 @@ accessed sg->address and sg->length as shown above. void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction direction) + int nents, enum dma_data_direction direction) Unmap the previously mapped scatter/gather list. All the parameters must be the same as those and passed in to the scatter/gather mapping API. Note: <nents> must be the number you passed in, *not* the number of -DMA address entries returned. +DMA address entries returned. In struct sg_table this is the field +called orig_nents. void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, @@ -356,10 +357,10 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) void -dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems, +dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) void -dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems, +dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents, enum dma_data_direction direction) Synchronise a single contiguous or scatter/gather mapping for the CPU