Message ID | 1442837694-2738-1-git-send-email-javier@osg.samsung.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 21 September 2015 at 14:14, Javier Martinez Canillas <javier@osg.samsung.com> wrote: > The simple power sequence provider sets a value for multiple GPIOs in one > go so it is better to use the API already provided by the GPIO descriptor > API instead of open coding the same logic. > > Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Thanks, applied for next! Kind regards Uffe > > --- > > drivers/mmc/core/pwrseq_simple.c | 45 ++++++++++++++-------------------------- > 1 file changed, 15 insertions(+), 30 deletions(-) > > diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c > index 0b14b83a53d6..d10538bb5e07 100644 > --- a/drivers/mmc/core/pwrseq_simple.c > +++ b/drivers/mmc/core/pwrseq_simple.c > @@ -23,18 +23,21 @@ struct mmc_pwrseq_simple { > struct mmc_pwrseq pwrseq; > bool clk_enabled; > struct clk *ext_clk; > - int nr_gpios; > - struct gpio_desc *reset_gpios[0]; > + struct gpio_descs *reset_gpios; > }; > > static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, > int value) > { > int i; > + struct gpio_descs *reset_gpios = pwrseq->reset_gpios; > + int values[reset_gpios->ndescs]; > > - for (i = 0; i < pwrseq->nr_gpios; i++) > - if (!IS_ERR(pwrseq->reset_gpios[i])) > - gpiod_set_value_cansleep(pwrseq->reset_gpios[i], value); > + for (i = 0; i < reset_gpios->ndescs; i++) > + values[i] = value; > + > + gpiod_set_array_value_cansleep(reset_gpios->ndescs, reset_gpios->desc, > + values); > } > > static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) > @@ -75,11 +78,8 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host) > { > struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, > struct mmc_pwrseq_simple, pwrseq); > - int i; > > - for (i = 0; i < pwrseq->nr_gpios; i++) > - if (!IS_ERR(pwrseq->reset_gpios[i])) > - gpiod_put(pwrseq->reset_gpios[i]); > + gpiod_put_array(pwrseq->reset_gpios); > > if (!IS_ERR(pwrseq->ext_clk)) > clk_put(pwrseq->ext_clk); > @@ -98,14 +98,9 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, > struct device *dev) > { > struct mmc_pwrseq_simple *pwrseq; > - int i, nr_gpios, ret = 0; > - > - nr_gpios = of_gpio_named_count(dev->of_node, "reset-gpios"); > - if (nr_gpios < 0) > - nr_gpios = 0; > + int ret = 0; > > - pwrseq = kzalloc(sizeof(struct mmc_pwrseq_simple) + nr_gpios * > - sizeof(struct gpio_desc *), GFP_KERNEL); > + pwrseq = kzalloc(sizeof(*pwrseq), GFP_KERNEL); > if (!pwrseq) > return ERR_PTR(-ENOMEM); > > @@ -116,22 +111,12 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, > goto free; > } > > - for (i = 0; i < nr_gpios; i++) { > - pwrseq->reset_gpios[i] = gpiod_get_index(dev, "reset", i, > - GPIOD_OUT_HIGH); > - if (IS_ERR(pwrseq->reset_gpios[i]) && > - PTR_ERR(pwrseq->reset_gpios[i]) != -ENOENT && > - PTR_ERR(pwrseq->reset_gpios[i]) != -ENOSYS) { > - ret = PTR_ERR(pwrseq->reset_gpios[i]); > - > - while (i--) > - gpiod_put(pwrseq->reset_gpios[i]); > - > - goto clk_put; > - } > + pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); > + if (IS_ERR(pwrseq->reset_gpios)) { > + ret = PTR_ERR(pwrseq->reset_gpios); > + goto clk_put; > } > > - pwrseq->nr_gpios = nr_gpios; > pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops; > > return &pwrseq->pwrseq; > -- > 2.4.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index 0b14b83a53d6..d10538bb5e07 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -23,18 +23,21 @@ struct mmc_pwrseq_simple { struct mmc_pwrseq pwrseq; bool clk_enabled; struct clk *ext_clk; - int nr_gpios; - struct gpio_desc *reset_gpios[0]; + struct gpio_descs *reset_gpios; }; static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq, int value) { int i; + struct gpio_descs *reset_gpios = pwrseq->reset_gpios; + int values[reset_gpios->ndescs]; - for (i = 0; i < pwrseq->nr_gpios; i++) - if (!IS_ERR(pwrseq->reset_gpios[i])) - gpiod_set_value_cansleep(pwrseq->reset_gpios[i], value); + for (i = 0; i < reset_gpios->ndescs; i++) + values[i] = value; + + gpiod_set_array_value_cansleep(reset_gpios->ndescs, reset_gpios->desc, + values); } static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host) @@ -75,11 +78,8 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host) { struct mmc_pwrseq_simple *pwrseq = container_of(host->pwrseq, struct mmc_pwrseq_simple, pwrseq); - int i; - for (i = 0; i < pwrseq->nr_gpios; i++) - if (!IS_ERR(pwrseq->reset_gpios[i])) - gpiod_put(pwrseq->reset_gpios[i]); + gpiod_put_array(pwrseq->reset_gpios); if (!IS_ERR(pwrseq->ext_clk)) clk_put(pwrseq->ext_clk); @@ -98,14 +98,9 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, struct device *dev) { struct mmc_pwrseq_simple *pwrseq; - int i, nr_gpios, ret = 0; - - nr_gpios = of_gpio_named_count(dev->of_node, "reset-gpios"); - if (nr_gpios < 0) - nr_gpios = 0; + int ret = 0; - pwrseq = kzalloc(sizeof(struct mmc_pwrseq_simple) + nr_gpios * - sizeof(struct gpio_desc *), GFP_KERNEL); + pwrseq = kzalloc(sizeof(*pwrseq), GFP_KERNEL); if (!pwrseq) return ERR_PTR(-ENOMEM); @@ -116,22 +111,12 @@ struct mmc_pwrseq *mmc_pwrseq_simple_alloc(struct mmc_host *host, goto free; } - for (i = 0; i < nr_gpios; i++) { - pwrseq->reset_gpios[i] = gpiod_get_index(dev, "reset", i, - GPIOD_OUT_HIGH); - if (IS_ERR(pwrseq->reset_gpios[i]) && - PTR_ERR(pwrseq->reset_gpios[i]) != -ENOENT && - PTR_ERR(pwrseq->reset_gpios[i]) != -ENOSYS) { - ret = PTR_ERR(pwrseq->reset_gpios[i]); - - while (i--) - gpiod_put(pwrseq->reset_gpios[i]); - - goto clk_put; - } + pwrseq->reset_gpios = gpiod_get_array(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(pwrseq->reset_gpios)) { + ret = PTR_ERR(pwrseq->reset_gpios); + goto clk_put; } - pwrseq->nr_gpios = nr_gpios; pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops; return &pwrseq->pwrseq;
The simple power sequence provider sets a value for multiple GPIOs in one go so it is better to use the API already provided by the GPIO descriptor API instead of open coding the same logic. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> --- drivers/mmc/core/pwrseq_simple.c | 45 ++++++++++++++-------------------------- 1 file changed, 15 insertions(+), 30 deletions(-)