diff mbox

PCI: Xilinx-NWL-PCIe: Added support for Xilinx NWL PCIe Host Controller

Message ID 1440675860-21491-1-git-send-email-bharatku@xilinx.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Bharat Kumar Gogada Aug. 27, 2015, 11:44 a.m. UTC
Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
 .../devicetree/bindings/pci/xilinx-nwl-pcie.txt    |   39 +
 drivers/pci/host/Kconfig                           |    9 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pci-xilinx-nwl.c                  | 1038 ++++++++++++++++++++
 4 files changed, 1087 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
 create mode 100644 drivers/pci/host/pci-xilinx-nwl.c

--
1.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Bjorn Helgaas Sept. 18, 2015, 8:37 p.m. UTC | #1
Hi Bharat,

On Thu, Aug 27, 2015 at 05:14:20PM +0530, Bharat Kumar Gogada wrote:
> Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.

> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 140d66f..0f3a789 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
>  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
>  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
>  obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
> +obj-$(CONFIG_PCI_XILINX_NWL) += pci-xilinx-nwl.o

The other Xilinx driver uses "CONFIG_PCIE_*" and "pcie-xilinx.o".  Please
use "pcie" similarly for this driver.

> +/**
> + * struct nwl_msi - MSI information
> + *
> + * @chip: MSI controller
> + * @used: Declare Bitmap for MSI
> + * @domain: IRQ domain pointer
> + * @pages: MSI pages
> + * @lock: mutex lock
> + * @irq_msi0: msi0 interrupt number
> + * @irq_msi1: msi1 interrupt number

Please put these short comments inside the struct definition, on the same
line as the element they describe.  It's needlessly repetitive to do it
separately.

> + */
> +struct nwl_msi {
> +	struct msi_controller chip;
> +	DECLARE_BITMAP(used, INT_PCI_MSI_NR);
> +	struct irq_domain *domain;
> +	unsigned long pages;
> +	struct mutex lock;
> +	int irq_msi0;
> +	int irq_msi1;
> +};

> +static inline bool nwl_pcie_is_link_up(struct nwl_pcie *pcie, u32 check_bit)

Please name this "nwl_pcie_link_up" so it's consistent with most others
(xilinx_pcie_link_is_up() is an exception).  I'm not sure the "check_bit"
argument is really an improvement, since it makes the code a bit ugly and
more different from other drivers than it would otherwise be.

> +{
> +	unsigned int status = -EINVAL;
> +
> +	if (check_bit == PCIE_USER_LINKUP)
> +		status = (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) &
> +			  PCIE_PHY_LINKUP_BIT) ? 1 : 0;
> +	else if (check_bit == PHY_RDY_LINKUP)
> +		status = (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) &
> +			  PHY_RDY_LINKUP_BIT) ? 1 : 0;
> +	return status;
> +}

> +static int nwl_setup_sspl(struct nwl_pcie *pcie)
> +{
> +	unsigned int status;
> +	int check = 0;
> +
> +	do {
> +		status = nwl_bridge_readl(pcie, TX_PCIE_MSG) & MSG_BUSY_BIT;
> +		if (!status) {
> +			/*
> +			 * Generate the TLP message for a single EP
> +			 * [TODO] Add a multi-endpoint code
> +			 */
> +			nwl_bridge_writel(pcie, 0x0,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
> +			nwl_bridge_writel(pcie, 0x0,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_SPEC_LO);
> +			nwl_bridge_writel(pcie, 0x0,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_SPEC_HI);
> +			nwl_bridge_writel(pcie, 0x0,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_DATA);
> +			/* Pattern to generate SSLP TLP */
> +			nwl_bridge_writel(pcie, PATTRN_SSLP_TLP,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
> +			nwl_bridge_writel(pcie, RANDOM_DIGIT,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_DATA);
> +			nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,
> +					  TX_PCIE_MSG) | 0x1, TX_PCIE_MSG);
> +			status = 0;
> +			do {
> +				status = nwl_bridge_readl(pcie, TX_PCIE_MSG) &
> +							  MSG_DONE_BIT;
> +				if (!status && (check < 1)) {
> +					mdelay(1);
> +					check++;
> +				} else {
> +					return false;
> +				}
> +
> +			} while (!status);
> +			status = nwl_bridge_readl(pcie, TX_PCIE_MSG)
> +						  & MSG_DONE_STATUS_BIT;
> +		}
> +	} while (status);
> +
> +	return true;

This function is defined to return "int."  It should not return "true" or
"false."

I'm really confused about what this function does.  I can see it does
at least:

  - wait until MSG_BUSY_BIT is clear
  - write a bunch of registers
  - some magic handshake involving MSG_DONE_BIT and
    MSG_DONE_STATUS_BIT (I really don't understand this)
  - possibly repeat if MSG_DONE_STATUS_BIT is set?

Can you clean this up and straighten it out somehow?  My head hurts
from trying to understand it.

> +static int nwl_nwl_writel_config(struct pci_bus *bus,
> +				unsigned int devfn,
> +				int where,
> +				int size,
> +				u32 val)
> +{
> +	void __iomem *addr;
> +	int err = 0;
> +	struct nwl_pcie *pcie = bus->sysdata;
> +
> +	if (!bus->number && devfn > 0)
> +		return PCIBIOS_DEVICE_NOT_FOUND;
> +
> +	addr = nwl_pcie_get_config_base(bus, devfn, where);
> +
> +	switch (size) {
> +	case 1:
> +		writeb(val, addr);
> +		break;
> +	case 2:
> +		writew(val, addr);
> +		break;
> +	default:
> +		writel(val, addr);
> +		break;
> +	}
> +	if (addr == (pcie->ecam_base + PCI_EXP_SLTCAP)) {

This only intercepts writes to bus 0.  I assume that's what you want, and
that's fine, but using pcie->ecam_base here is totally non-obvious.  If you
want to check for bus 0, use "bus->number == 0".

I think offset PCI_EXP_SLTCAP is wrong.  That's the offset of SLTCAP from
the beginning of the PCIe capability, not the address in the device's
config space.  You're intercepting writes 20 (0x14), which is BAR1.

> +		err = nwl_setup_sspl(pcie);
> +		if (!err)
> +			return PCIBIOS_SET_FAILED;

This doesn't make sense to me.  First, "err" doesn't need to be
initialized above.  Second, this basically reads "if no error, return
failure."

> +static void __nwl_pcie_msi_handler(struct nwl_pcie *pcie,
> +					unsigned long reg, u32 val)
> +{
> +	struct nwl_msi *msi = &pcie->msi;
> +	unsigned int offset, index;
> +	int irq_msi;
> +
> +	offset = find_first_bit(&reg, 32);
> +	index = offset;
> +
> +	/* Clear the interrupt */
> +	nwl_bridge_writel(pcie, 1 << offset, val);
> +
> +	/* Handle the msi virtual interrupt */
> +	irq_msi = irq_find_mapping(msi->domain, index);
> +	if (irq_msi) {
> +		if (test_bit(index, msi->used))
> +			generic_handle_irq(irq_msi);
> +		else
> +			dev_info(pcie->dev, "unhandled MSI\n");
> +	} else {
> +		/* that's weird who triggered this? just clear it */
> +		dev_info(pcie->dev, "unexpected MSI\n");

The comment says "just clear it," but there's nothing in this block
that actually clears it.  Maybe you meant "we cleared it above; just
note it"?

> +static int nwl_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
> +			       struct msi_desc *desc)
> +{
> +	struct nwl_msi *msi = to_nwl_msi(chip);
> +	struct msi_msg msg;
> +	unsigned int irq;
> +	int hwirq;
> +
> +	if (desc->msi_attrib.is_msix) {
> +		/* currently we are not supporting MSIx */
> +		return -ENOSPC;
> +	}

Remove the braces here so it's the same style as below
(single-statement blocks don't need braces).  You can move the comment
above the "if" to make it more obvious that it's a single-statement
block.

> +
> +	hwirq = nwl_msi_alloc(msi);
> +	if (hwirq < 0)
> +		return hwirq;
> +
> +	irq = irq_create_mapping(msi->domain, hwirq);
> +	if (!irq)
> +		return -EINVAL;

> +static int nwl_pcie_enable_msi(struct nwl_pcie *pcie, struct pci_bus *bus)
> +{
> +	struct platform_device *pdev = to_platform_device(pcie->dev);
> +	struct nwl_msi *msi = &pcie->msi;
> +	unsigned long base;
> +	int ret;
> +
> +	mutex_init(&msi->lock);
> +
> +	/* Assign msi chip hooks */
> +	msi->chip.dev = pcie->dev;
> +	msi->chip.setup_irq = nwl_msi_setup_irq;
> +	msi->chip.teardown_irq = nwl_msi_teardown_irq;
> +
> +	bus->msi = &msi->chip;
> +	/* Allocate linear irq domain */
> +	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
> +					    &msi_domain_ops, &msi->chip);
> +	if (!msi->domain) {
> +		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	/* Check for msii_present bit */
> +	ret = nwl_bridge_readl(pcie, I_MSII_CAPABILITIES) & MSII_PRESENT;
> +	if (!ret) {
> +		dev_err(pcie->dev, "MSI not present\n");
> +		ret = -EIO;
> +		goto err;
> +	}
> +
> +	/* Enable MSII */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> +			  MSII_ENABLE, I_MSII_CONTROL);
> +	if (!pcie->enable_msi_fifo)
> +		/* Enable MSII status */
> +		nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> +				  MSII_STATUS_ENABLE, I_MSII_CONTROL);
> +
> +	/* setup AFI/FPCI range */
> +	msi->pages = __get_free_pages(GFP_KERNEL, 0);
> +	base = virt_to_phys((void *)msi->pages);
> +	/* Write base to MSII_BASE_LO */
> +	nwl_bridge_writel(pcie, base, I_MSII_BASE_LO);
> +
> +	/* Write 0x0 to MSII_BASE_HI */

These comments ("Allocate linear irq domain," "write xx to yy," etc.)
are really just repetitive and you might as well remove them because
the code says the same thing.  Sometimes it's not obvious what the
code is doing, and then a comment is worthwhile.

> +static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
> +{
> +	struct platform_device *pdev = to_platform_device(pcie->dev);
> +	u32 breg_val, ecam_val, first_busno = 0;
> +	int err;
> +	int check_link_up = 0;
> +
> +	/* Check for BREG present bit */
> +	breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
> +	if (!breg_val) {
> +		dev_err(pcie->dev, "BREG is not present\n");
> +		return breg_val;
> +	}
> +	/* Write bridge_off to breg base */
> +	nwl_bridge_writel(pcie, (u32)(pcie->phys_breg_base),
> +			  E_BREG_BASE_LO);
> +
> +	/* Enable BREG */
> +	nwl_bridge_writel(pcie, ~BREG_ENABLE_FORCE & BREG_ENABLE,
> +			  E_BREG_CONTROL);
> +
> +	/* Disable DMA channel registers */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX0) |
> +			  CFG_DMA_REG_BAR, BRCFG_PCIE_RX0);
> +
> +	/* Enable the bridge config interrupt */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_INTERRUPT) |
> +			  BRCFG_INTERRUPT_MASK, BRCFG_INTERRUPT);
> +	/* Enable Ingress subtractive decode translation */
> +	nwl_bridge_writel(pcie, SET_ISUB_CONTROL, I_ISUB_CONTROL);
> +
> +	/* Enable msg filtering details */
> +	nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
> +			  BRCFG_PCIE_RX_MSG_FILTER);
> +	do {
> +		err = nwl_pcie_is_link_up(pcie, PHY_RDY_LINKUP);
> +		if (err != 1) {
> +			check_link_up++;
> +			if (check_link_up > LINKUP_ITER_CHECK)
> +				return -ENODEV;
> +		}
> +	} while (!err);

Most drivers use usleep_range() or mdelay() in this kind of loop.  This one
seems like it's hardly worth looping -- only 5 iterations with no delay at
all?  Maybe you could even look at the similar loops in other drivers
and copy the style of the loop.

> +static int nwl_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	struct nwl_pcie *pcie;
> +	struct pci_bus *bus;
> +	int err;
> +
> +	resource_size_t iobase = 0;
> +	LIST_HEAD(res);
> +
> +	/* Allocate private nwl_pcie struct */

More comments that really aren't necessary.  "Allocate," "set ecam
value," "parse device tree," these are all just what the function
names already tell us.

> +	pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	/* Set ecam value */
> +	pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
> +
> +	pcie->dev = &pdev->dev;
> +
> +	/* Parse the device tree */
> +	err = nwl_pcie_parse_dt(pcie, pdev);
> +	if (err) {
> +		dev_err(pcie->dev, "Parsing DT failed\n");
> +		return err;
> +	}
> +	/* Bridge initialization */
> +	err = nwl_pcie_bridge_init(pcie);
> +	if (err) {
> +		dev_err(pcie->dev, "HW Initalization failed\n");
> +		return err;
> +	}
> +
> +	err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
> +	if (err) {
> +		pr_err("Getting bridge resources failed\n");
> +		return err;
> +	}
> +	bus = pci_create_root_bus(&pdev->dev, 0,
> +				  &nwl_pcie_ops, pcie, &res);
> +	if (!bus)
> +		return -ENOMEM;
> +
> +	/* Enable MSI */
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		err = nwl_pcie_enable_msi(pcie, bus);
> +		if (err < 0) {
> +			dev_err(&pdev->dev,
> +				"failed to enable MSI support: %d\n",
> +				err);
> +			return err;
> +		}
> +	}
> +	pci_scan_child_bus(bus);
> +	pci_assign_unassigned_bus_resources(bus);
> +	pci_bus_add_devices(bus);
> +	platform_set_drvdata(pdev, pcie);
> +
> +	return 0;
> +}

Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Mark Rutland Sept. 24, 2015, 1:19 a.m. UTC | #2
On Thu, Aug 27, 2015 at 12:44:20PM +0100, Bharat Kumar Gogada wrote:
> Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
> 
> Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> ---
>  .../devicetree/bindings/pci/xilinx-nwl-pcie.txt    |   39 +
>  drivers/pci/host/Kconfig                           |    9 +
>  drivers/pci/host/Makefile                          |    1 +
>  drivers/pci/host/pci-xilinx-nwl.c                  | 1038 ++++++++++++++++++++
>  4 files changed, 1087 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
>  create mode 100644 drivers/pci/host/pci-xilinx-nwl.c
> 
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> new file mode 100644
> index 0000000..c554d6b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> @@ -0,0 +1,39 @@
> +* Xilinx NWL PCIe Root Port Bridge DT description
> +
> +Required properties:
> +- compatible: Should contain "xlnx,nwl-pcie-2.11"
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +       interrupt source. The value must be 1.

This isn't in the example, and I cna't see why/how you would use this.

> +- reg: Should contain Bridge, PCIe Controller registers location and length

You need to define reg-names, given the example and driver rely on it.

> +- device_type: must be "pci"
> +- interrupts: Should contain NWL PCIe interrupt

You need to define interrupt-names, given the example and driver rely on it.

> +- ranges: ranges for the PCI memory regions (I/O space region is not
> +       supported by hardware)
> +       Please refer to the standard PCI bus binding document for a more
> +       detailed explanation
> +
> +Optional properties:
> +- xlnx,msi-fifo: To enable MSI FIFO mode

Why is this in the binding?

When should or shouldn't I set this?

I take it the root complex is its own MSI controller?

> +
> +Example:
> +++++++++
> +nwl_pcie: pcie@fd0e0000 {
> +       compatible = "xlnx,nwl-pcie-2.11";
> +       #address-cells = <3>;
> +       #size-cells = <2>;
> +       #interrupt-cells = <1>;
> +       device_type = "pci";
> +       interrupt-parent = <&gic>;
> +       interrupts = < 0 118 4
> +                      0 116 4
> +                      0 115 4          // MSI_1 [63...32]
> +                      0 114 4 >;       // MSI_0 [31...0]

Nit: please bracket list entires individually (that also applies to reg).

> +       interrupt-names = "misc", "intx", "msi_1", "msi_0";
> +       reg = <0x0 0xfd0e0000 0x1000
> +              0x0 0xfd480000 0x1000
> +              0x0 0xE0000000 0x1000000>;
> +       reg-names = "breg", "pcireg", "cfg";
> +       ranges = <0x02000000 0x00000000 0xE1000000 0x00000000 0xE1000000 0 0x0F000000>;
> +};

Thanks,
Mark.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Bjorn Helgaas Sept. 24, 2015, 7:58 p.m. UTC | #3
Hi Bharat,

I'm resending this since you sent a ping three days after I responded,
so I don't know whether you got this the first time around.

DMARC got turned on for mail coming from @google.com, which apparently
caused some email providers to drop it.  I switched to sending from
helgaas@kernel.org to avoid that problem.

Bjorn

On Fri, Sep 18, 2015 at 03:37:36PM -0500, Bjorn Helgaas wrote:
> Hi Bharat,
> 
> On Thu, Aug 27, 2015 at 05:14:20PM +0530, Bharat Kumar Gogada wrote:
> > Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
> 
> > diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> > index 140d66f..0f3a789 100644
> > --- a/drivers/pci/host/Makefile
> > +++ b/drivers/pci/host/Makefile
> > @@ -10,6 +10,7 @@ obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
> >  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> >  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
> >  obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
> > +obj-$(CONFIG_PCI_XILINX_NWL) += pci-xilinx-nwl.o
> 
> The other Xilinx driver uses "CONFIG_PCIE_*" and "pcie-xilinx.o".  Please
> use "pcie" similarly for this driver.
> 
> > +/**
> > + * struct nwl_msi - MSI information
> > + *
> > + * @chip: MSI controller
> > + * @used: Declare Bitmap for MSI
> > + * @domain: IRQ domain pointer
> > + * @pages: MSI pages
> > + * @lock: mutex lock
> > + * @irq_msi0: msi0 interrupt number
> > + * @irq_msi1: msi1 interrupt number
> 
> Please put these short comments inside the struct definition, on the same
> line as the element they describe.  It's needlessly repetitive to do it
> separately.
> 
> > + */
> > +struct nwl_msi {
> > +	struct msi_controller chip;
> > +	DECLARE_BITMAP(used, INT_PCI_MSI_NR);
> > +	struct irq_domain *domain;
> > +	unsigned long pages;
> > +	struct mutex lock;
> > +	int irq_msi0;
> > +	int irq_msi1;
> > +};
> 
> > +static inline bool nwl_pcie_is_link_up(struct nwl_pcie *pcie, u32 check_bit)
> 
> Please name this "nwl_pcie_link_up" so it's consistent with most others
> (xilinx_pcie_link_is_up() is an exception).  I'm not sure the "check_bit"
> argument is really an improvement, since it makes the code a bit ugly and
> more different from other drivers than it would otherwise be.
> 
> > +{
> > +	unsigned int status = -EINVAL;
> > +
> > +	if (check_bit == PCIE_USER_LINKUP)
> > +		status = (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) &
> > +			  PCIE_PHY_LINKUP_BIT) ? 1 : 0;
> > +	else if (check_bit == PHY_RDY_LINKUP)
> > +		status = (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) &
> > +			  PHY_RDY_LINKUP_BIT) ? 1 : 0;
> > +	return status;
> > +}
> 
> > +static int nwl_setup_sspl(struct nwl_pcie *pcie)
> > +{
> > +	unsigned int status;
> > +	int check = 0;
> > +
> > +	do {
> > +		status = nwl_bridge_readl(pcie, TX_PCIE_MSG) & MSG_BUSY_BIT;
> > +		if (!status) {
> > +			/*
> > +			 * Generate the TLP message for a single EP
> > +			 * [TODO] Add a multi-endpoint code
> > +			 */
> > +			nwl_bridge_writel(pcie, 0x0,
> > +					  TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
> > +			nwl_bridge_writel(pcie, 0x0,
> > +					  TX_PCIE_MSG + TX_PCIE_MSG_SPEC_LO);
> > +			nwl_bridge_writel(pcie, 0x0,
> > +					  TX_PCIE_MSG + TX_PCIE_MSG_SPEC_HI);
> > +			nwl_bridge_writel(pcie, 0x0,
> > +					  TX_PCIE_MSG + TX_PCIE_MSG_DATA);
> > +			/* Pattern to generate SSLP TLP */
> > +			nwl_bridge_writel(pcie, PATTRN_SSLP_TLP,
> > +					  TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
> > +			nwl_bridge_writel(pcie, RANDOM_DIGIT,
> > +					  TX_PCIE_MSG + TX_PCIE_MSG_DATA);
> > +			nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,
> > +					  TX_PCIE_MSG) | 0x1, TX_PCIE_MSG);
> > +			status = 0;
> > +			do {
> > +				status = nwl_bridge_readl(pcie, TX_PCIE_MSG) &
> > +							  MSG_DONE_BIT;
> > +				if (!status && (check < 1)) {
> > +					mdelay(1);
> > +					check++;
> > +				} else {
> > +					return false;
> > +				}
> > +
> > +			} while (!status);
> > +			status = nwl_bridge_readl(pcie, TX_PCIE_MSG)
> > +						  & MSG_DONE_STATUS_BIT;
> > +		}
> > +	} while (status);
> > +
> > +	return true;
> 
> This function is defined to return "int."  It should not return "true" or
> "false."
> 
> I'm really confused about what this function does.  I can see it does
> at least:
> 
>   - wait until MSG_BUSY_BIT is clear
>   - write a bunch of registers
>   - some magic handshake involving MSG_DONE_BIT and
>     MSG_DONE_STATUS_BIT (I really don't understand this)
>   - possibly repeat if MSG_DONE_STATUS_BIT is set?
> 
> Can you clean this up and straighten it out somehow?  My head hurts
> from trying to understand it.
> 
> > +static int nwl_nwl_writel_config(struct pci_bus *bus,
> > +				unsigned int devfn,
> > +				int where,
> > +				int size,
> > +				u32 val)
> > +{
> > +	void __iomem *addr;
> > +	int err = 0;
> > +	struct nwl_pcie *pcie = bus->sysdata;
> > +
> > +	if (!bus->number && devfn > 0)
> > +		return PCIBIOS_DEVICE_NOT_FOUND;
> > +
> > +	addr = nwl_pcie_get_config_base(bus, devfn, where);
> > +
> > +	switch (size) {
> > +	case 1:
> > +		writeb(val, addr);
> > +		break;
> > +	case 2:
> > +		writew(val, addr);
> > +		break;
> > +	default:
> > +		writel(val, addr);
> > +		break;
> > +	}
> > +	if (addr == (pcie->ecam_base + PCI_EXP_SLTCAP)) {
> 
> This only intercepts writes to bus 0.  I assume that's what you want, and
> that's fine, but using pcie->ecam_base here is totally non-obvious.  If you
> want to check for bus 0, use "bus->number == 0".
> 
> I think offset PCI_EXP_SLTCAP is wrong.  That's the offset of SLTCAP from
> the beginning of the PCIe capability, not the address in the device's
> config space.  You're intercepting writes 20 (0x14), which is BAR1.
> 
> > +		err = nwl_setup_sspl(pcie);
> > +		if (!err)
> > +			return PCIBIOS_SET_FAILED;
> 
> This doesn't make sense to me.  First, "err" doesn't need to be
> initialized above.  Second, this basically reads "if no error, return
> failure."
> 
> > +static void __nwl_pcie_msi_handler(struct nwl_pcie *pcie,
> > +					unsigned long reg, u32 val)
> > +{
> > +	struct nwl_msi *msi = &pcie->msi;
> > +	unsigned int offset, index;
> > +	int irq_msi;
> > +
> > +	offset = find_first_bit(&reg, 32);
> > +	index = offset;
> > +
> > +	/* Clear the interrupt */
> > +	nwl_bridge_writel(pcie, 1 << offset, val);
> > +
> > +	/* Handle the msi virtual interrupt */
> > +	irq_msi = irq_find_mapping(msi->domain, index);
> > +	if (irq_msi) {
> > +		if (test_bit(index, msi->used))
> > +			generic_handle_irq(irq_msi);
> > +		else
> > +			dev_info(pcie->dev, "unhandled MSI\n");
> > +	} else {
> > +		/* that's weird who triggered this? just clear it */
> > +		dev_info(pcie->dev, "unexpected MSI\n");
> 
> The comment says "just clear it," but there's nothing in this block
> that actually clears it.  Maybe you meant "we cleared it above; just
> note it"?
> 
> > +static int nwl_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
> > +			       struct msi_desc *desc)
> > +{
> > +	struct nwl_msi *msi = to_nwl_msi(chip);
> > +	struct msi_msg msg;
> > +	unsigned int irq;
> > +	int hwirq;
> > +
> > +	if (desc->msi_attrib.is_msix) {
> > +		/* currently we are not supporting MSIx */
> > +		return -ENOSPC;
> > +	}
> 
> Remove the braces here so it's the same style as below
> (single-statement blocks don't need braces).  You can move the comment
> above the "if" to make it more obvious that it's a single-statement
> block.
> 
> > +
> > +	hwirq = nwl_msi_alloc(msi);
> > +	if (hwirq < 0)
> > +		return hwirq;
> > +
> > +	irq = irq_create_mapping(msi->domain, hwirq);
> > +	if (!irq)
> > +		return -EINVAL;
> 
> > +static int nwl_pcie_enable_msi(struct nwl_pcie *pcie, struct pci_bus *bus)
> > +{
> > +	struct platform_device *pdev = to_platform_device(pcie->dev);
> > +	struct nwl_msi *msi = &pcie->msi;
> > +	unsigned long base;
> > +	int ret;
> > +
> > +	mutex_init(&msi->lock);
> > +
> > +	/* Assign msi chip hooks */
> > +	msi->chip.dev = pcie->dev;
> > +	msi->chip.setup_irq = nwl_msi_setup_irq;
> > +	msi->chip.teardown_irq = nwl_msi_teardown_irq;
> > +
> > +	bus->msi = &msi->chip;
> > +	/* Allocate linear irq domain */
> > +	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
> > +					    &msi_domain_ops, &msi->chip);
> > +	if (!msi->domain) {
> > +		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	/* Check for msii_present bit */
> > +	ret = nwl_bridge_readl(pcie, I_MSII_CAPABILITIES) & MSII_PRESENT;
> > +	if (!ret) {
> > +		dev_err(pcie->dev, "MSI not present\n");
> > +		ret = -EIO;
> > +		goto err;
> > +	}
> > +
> > +	/* Enable MSII */
> > +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> > +			  MSII_ENABLE, I_MSII_CONTROL);
> > +	if (!pcie->enable_msi_fifo)
> > +		/* Enable MSII status */
> > +		nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> > +				  MSII_STATUS_ENABLE, I_MSII_CONTROL);
> > +
> > +	/* setup AFI/FPCI range */
> > +	msi->pages = __get_free_pages(GFP_KERNEL, 0);
> > +	base = virt_to_phys((void *)msi->pages);
> > +	/* Write base to MSII_BASE_LO */
> > +	nwl_bridge_writel(pcie, base, I_MSII_BASE_LO);
> > +
> > +	/* Write 0x0 to MSII_BASE_HI */
> 
> These comments ("Allocate linear irq domain," "write xx to yy," etc.)
> are really just repetitive and you might as well remove them because
> the code says the same thing.  Sometimes it's not obvious what the
> code is doing, and then a comment is worthwhile.
> 
> > +static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
> > +{
> > +	struct platform_device *pdev = to_platform_device(pcie->dev);
> > +	u32 breg_val, ecam_val, first_busno = 0;
> > +	int err;
> > +	int check_link_up = 0;
> > +
> > +	/* Check for BREG present bit */
> > +	breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
> > +	if (!breg_val) {
> > +		dev_err(pcie->dev, "BREG is not present\n");
> > +		return breg_val;
> > +	}
> > +	/* Write bridge_off to breg base */
> > +	nwl_bridge_writel(pcie, (u32)(pcie->phys_breg_base),
> > +			  E_BREG_BASE_LO);
> > +
> > +	/* Enable BREG */
> > +	nwl_bridge_writel(pcie, ~BREG_ENABLE_FORCE & BREG_ENABLE,
> > +			  E_BREG_CONTROL);
> > +
> > +	/* Disable DMA channel registers */
> > +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX0) |
> > +			  CFG_DMA_REG_BAR, BRCFG_PCIE_RX0);
> > +
> > +	/* Enable the bridge config interrupt */
> > +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_INTERRUPT) |
> > +			  BRCFG_INTERRUPT_MASK, BRCFG_INTERRUPT);
> > +	/* Enable Ingress subtractive decode translation */
> > +	nwl_bridge_writel(pcie, SET_ISUB_CONTROL, I_ISUB_CONTROL);
> > +
> > +	/* Enable msg filtering details */
> > +	nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
> > +			  BRCFG_PCIE_RX_MSG_FILTER);
> > +	do {
> > +		err = nwl_pcie_is_link_up(pcie, PHY_RDY_LINKUP);
> > +		if (err != 1) {
> > +			check_link_up++;
> > +			if (check_link_up > LINKUP_ITER_CHECK)
> > +				return -ENODEV;
> > +		}
> > +	} while (!err);
> 
> Most drivers use usleep_range() or mdelay() in this kind of loop.  This one
> seems like it's hardly worth looping -- only 5 iterations with no delay at
> all?  Maybe you could even look at the similar loops in other drivers
> and copy the style of the loop.
> 
> > +static int nwl_pcie_probe(struct platform_device *pdev)
> > +{
> > +	struct device_node *node = pdev->dev.of_node;
> > +	struct nwl_pcie *pcie;
> > +	struct pci_bus *bus;
> > +	int err;
> > +
> > +	resource_size_t iobase = 0;
> > +	LIST_HEAD(res);
> > +
> > +	/* Allocate private nwl_pcie struct */
> 
> More comments that really aren't necessary.  "Allocate," "set ecam
> value," "parse device tree," these are all just what the function
> names already tell us.
> 
> > +	pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> > +	if (!pcie)
> > +		return -ENOMEM;
> > +
> > +	/* Set ecam value */
> > +	pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
> > +
> > +	pcie->dev = &pdev->dev;
> > +
> > +	/* Parse the device tree */
> > +	err = nwl_pcie_parse_dt(pcie, pdev);
> > +	if (err) {
> > +		dev_err(pcie->dev, "Parsing DT failed\n");
> > +		return err;
> > +	}
> > +	/* Bridge initialization */
> > +	err = nwl_pcie_bridge_init(pcie);
> > +	if (err) {
> > +		dev_err(pcie->dev, "HW Initalization failed\n");
> > +		return err;
> > +	}
> > +
> > +	err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
> > +	if (err) {
> > +		pr_err("Getting bridge resources failed\n");
> > +		return err;
> > +	}
> > +	bus = pci_create_root_bus(&pdev->dev, 0,
> > +				  &nwl_pcie_ops, pcie, &res);
> > +	if (!bus)
> > +		return -ENOMEM;
> > +
> > +	/* Enable MSI */
> > +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> > +		err = nwl_pcie_enable_msi(pcie, bus);
> > +		if (err < 0) {
> > +			dev_err(&pdev->dev,
> > +				"failed to enable MSI support: %d\n",
> > +				err);
> > +			return err;
> > +		}
> > +	}
> > +	pci_scan_child_bus(bus);
> > +	pci_assign_unassigned_bus_resources(bus);
> > +	pci_bus_add_devices(bus);
> > +	platform_set_drvdata(pdev, pcie);
> > +
> > +	return 0;
> > +}
> 
> Bjorn
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
new file mode 100644
index 0000000..c554d6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
@@ -0,0 +1,39 @@ 
+* Xilinx NWL PCIe Root Port Bridge DT description
+
+Required properties:
+- compatible: Should contain "xlnx,nwl-pcie-2.11"
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+	interrupt source. The value must be 1.
+- reg: Should contain Bridge, PCIe Controller registers location and length
+- device_type: must be "pci"
+- interrupts: Should contain NWL PCIe interrupt
+- ranges: ranges for the PCI memory regions (I/O space region is not
+	supported by hardware)
+	Please refer to the standard PCI bus binding document for a more
+	detailed explanation
+
+Optional properties:
+- xlnx,msi-fifo: To enable MSI FIFO mode
+
+Example:
+++++++++
+nwl_pcie: pcie@fd0e0000 {
+	compatible = "xlnx,nwl-pcie-2.11";
+	#address-cells = <3>;
+	#size-cells = <2>;
+	#interrupt-cells = <1>;
+	device_type = "pci";
+	interrupt-parent = <&gic>;
+	interrupts = < 0 118 4
+		       0 116 4
+		       0 115 4		// MSI_1 [63...32]
+		       0 114 4 >;	// MSI_0 [31...0]
+	interrupt-names = "misc", "intx", "msi_1", "msi_0";
+	reg = <0x0 0xfd0e0000 0x1000
+	       0x0 0xfd480000 0x1000
+	       0x0 0xE0000000 0x1000000>;
+	reg-names = "breg", "pcireg", "cfg";
+	ranges = <0x02000000 0x00000000 0xE1000000 0x00000000 0xE1000000 0 0x0F000000>;
+};
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index c132bdd..5ff4e7e 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -15,6 +15,15 @@  config PCI_MVEBU
	depends on ARCH_MVEBU || ARCH_DOVE
	depends on OF

+config PCI_XILINX_NWL
+	bool "NWL PCIe Core"
+	depends on ARCH_ZYNQMP && PCI_MSI
+	help
+	 Say 'Y' here if you want kernel to support for Xilinx
+	 NWL PCIe controller.The controller can act as Root Port
+	 or End Point.The current option selection will only
+	 support root port enabling.
+
 config PCIE_DW
	bool

diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 140d66f..0f3a789 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -10,6 +10,7 @@  obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
 obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
 obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
+obj-$(CONFIG_PCI_XILINX_NWL) += pci-xilinx-nwl.o
 obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
 obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
diff --git a/drivers/pci/host/pci-xilinx-nwl.c b/drivers/pci/host/pci-xilinx-nwl.c
new file mode 100644
index 0000000..6c2fa80
--- /dev/null
+++ b/drivers/pci/host/pci-xilinx-nwl.c
@@ -0,0 +1,1038 @@ 
+/*
+ * PCIe host controller driver for NWL PCIe Bridge
+ * Based on pci-xilinx.c, pci-tegra.c
+ *
+ * (C) Copyright 2014 - 2015, Xilinx, Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+/* Bridge core config registers */
+#define BRCFG_PCIE_RX0			0x00000000
+#define BRCFG_PCIE_RX1			0x00000004
+#define BRCFG_AXI_MASTER		0x00000008
+#define BRCFG_PCIE_TX			0x0000000C
+#define BRCFG_INTERRUPT			0x00000010
+#define BRCFG_RAM_DISABLE0		0x00000014
+#define BRCFG_RAM_DISABLE1		0x00000018
+#define BRCFG_PCIE_RELAXED_ORDER	0x0000001C
+#define BRCFG_PCIE_RX_MSG_FILTER	0x00000020
+
+/* Attribute registers */
+#define NWL_ATTRIB_100			0x00000190
+
+/* Egress - Bridge translation registers */
+#define E_BREG_CAPABILITIES		0x00000200
+#define E_BREG_STATUS			0x00000204
+#define E_BREG_CONTROL			0x00000208
+#define E_BREG_BASE_LO			0x00000210
+#define E_BREG_BASE_HI			0x00000214
+#define E_ECAM_CAPABILITIES		0x00000220
+#define E_ECAM_STATUS			0x00000224
+#define E_ECAM_CONTROL			0x00000228
+#define E_ECAM_BASE_LO			0x00000230
+#define E_ECAM_BASE_HI			0x00000234
+
+/* Ingress - address translations */
+#define I_MSII_CAPABILITIES		0x00000300
+#define I_MSII_CONTROL			0x00000308
+#define I_MSII_BASE_LO			0x00000310
+#define I_MSII_BASE_HI			0x00000314
+
+#define I_ISUB_CONTROL			0x000003E8
+#define SET_ISUB_CONTROL		BIT(0)
+/* Rxed msg fifo  - Interrupt status registers */
+#define MSGF_MISC_STATUS		0x00000400
+#define MSGF_MISC_MASK			0x00000404
+#define MSGF_LEG_STATUS			0x00000420
+#define MSGF_LEG_MASK			0x00000424
+#define MSGF_MSI_STATUS_LO		0x00000440
+#define MSGF_MSI_STATUS_HI		0x00000444
+#define MSGF_MSI_MASK_LO		0x00000448
+#define MSGF_MSI_MASK_HI		0x0000044C
+#define MSGF_RX_FIFO_POP		0x00000484
+#define MSGF_RX_FIFO_TYPE		0x00000488
+#define MSGF_RX_FIFO_ADDRLO		0x00000490
+#define MSGF_RX_FIFO_ADDRHI		0x00000494
+#define MSGF_RX_FIFO_DATA		0x00000498
+
+/* Msg filter mask bits */
+#define CFG_ENABLE_PM_MSG_FWD		BIT(1)
+#define CFG_ENABLE_INT_MSG_FWD		BIT(2)
+#define CFG_ENABLE_ERR_MSG_FWD		BIT(3)
+#define CFG_ENABLE_SLT_MSG_FWD		BIT(5)
+#define CFG_ENABLE_VEN_MSG_FWD		BIT(7)
+#define CFG_ENABLE_OTH_MSG_FWD		BIT(13)
+#define CFG_ENABLE_VEN_MSG_EN		BIT(14)
+#define CFG_ENABLE_VEN_MSG_VEN_INV	BIT(15)
+#define CFG_ENABLE_VEN_MSG_VEN_ID	GENMASK(31, 16)
+#define CFG_ENABLE_MSG_FILTER_MASK	(CFG_ENABLE_PM_MSG_FWD | \
+					CFG_ENABLE_INT_MSG_FWD | \
+					CFG_ENABLE_ERR_MSG_FWD | \
+					CFG_ENABLE_SLT_MSG_FWD | \
+					CFG_ENABLE_VEN_MSG_FWD | \
+					CFG_ENABLE_OTH_MSG_FWD | \
+					CFG_ENABLE_VEN_MSG_EN | \
+					CFG_ENABLE_VEN_MSG_VEN_INV | \
+					CFG_ENABLE_VEN_MSG_VEN_ID)
+
+/* Misc interrupt status mask bits */
+#define MSGF_MISC_SR_RXMSG_AVAIL	BIT(0)
+#define MSGF_MISC_SR_RXMSG_OVER		BIT(1)
+#define MSGF_MISC_SR_SLAVE_ERR		BIT(4)
+#define MSGF_MISC_SR_MASTER_ERR		BIT(5)
+#define MSGF_MISC_SR_I_ADDR_ERR		BIT(6)
+#define MSGF_MISC_SR_E_ADDR_ERR		BIT(7)
+
+#define MSGF_MISC_SR_PCIE_CORE		GENMASK(18, 16)
+#define MSGF_MISC_SR_PCIE_CORE_ERR	GENMASK(31, 20)
+
+#define MSGF_MISC_SR_MASKALL		(MSGF_MISC_SR_RXMSG_AVAIL | \
+					MSGF_MISC_SR_RXMSG_OVER | \
+					MSGF_MISC_SR_SLAVE_ERR | \
+					MSGF_MISC_SR_MASTER_ERR | \
+					MSGF_MISC_SR_I_ADDR_ERR | \
+					MSGF_MISC_SR_E_ADDR_ERR | \
+					MSGF_MISC_SR_PCIE_CORE | \
+					MSGF_MISC_SR_PCIE_CORE_ERR)
+
+/* Message rx fifo type mask bits */
+#define MSGF_RX_FIFO_TYPE_MSI	(1)
+#define MSGF_RX_FIFO_TYPE_TYPE	GENMASK(1, 0)
+
+/* Legacy interrupt status mask bits */
+#define MSGF_LEG_SR_INTA		BIT(0)
+#define MSGF_LEG_SR_INTB		BIT(1)
+#define MSGF_LEG_SR_INTC		BIT(2)
+#define MSGF_LEG_SR_INTD		BIT(3)
+#define MSGF_LEG_SR_MASKALL		(MSGF_LEG_SR_INTA | MSGF_LEG_SR_INTB | \
+					MSGF_LEG_SR_INTC | MSGF_LEG_SR_INTD)
+
+/* MSI interrupt status mask bits */
+#define MSGF_MSI_SR_LO_MASK		BIT(0)
+#define MSGF_MSI_SR_HI_MASK		BIT(0)
+
+#define MSII_PRESENT			BIT(0)
+#define MSII_ENABLE			BIT(0)
+#define MSII_STATUS_ENABLE		BIT(15)
+
+/* Bridge config interrupt mask */
+#define BRCFG_INTERRUPT_MASK		BIT(0)
+#define BREG_PRESENT			BIT(0)
+#define BREG_ENABLE			BIT(0)
+#define BREG_ENABLE_FORCE		BIT(1)
+
+/* E_ECAM status mask bits */
+#define E_ECAM_PRESENT			BIT(0)
+#define E_ECAM_SR_WR_PEND		BIT(16)
+#define E_ECAM_SR_RD_PEND		BIT(0)
+#define E_ECAM_SR_MASKALL		(E_ECAM_SR_WR_PEND | E_ECAM_SR_RD_PEND)
+#define E_ECAM_CR_ENABLE		BIT(0)
+#define E_ECAM_SIZE_LOC			GENMASK(20, 16)
+#define E_ECAM_SIZE_SHIFT		16
+#define ECAM_BUS_LOC_SHIFT		20
+#define ECAM_DEV_LOC_SHIFT		12
+#define NWL_ECAM_VALUE_DEFAULT		12
+#define NWL_ECAM_SIZE_MIN		4096
+
+#define ATTR_UPSTREAM_FACING		BIT(6)
+#define CFG_DMA_REG_BAR			GENMASK(2, 0)
+
+/* msgf_rx_fifo_pop bits */
+#define MSGF_RX_FIFO_POP_POP	BIT(0)
+
+#define INT_PCI_MSI_NR			(2 * 32)
+
+/* Readin the PS_LINKUP */
+#define PS_LINKUP_OFFSET			0x00000238
+#define PCIE_PHY_LINKUP_BIT			BIT(0)
+#define PHY_RDY_LINKUP_BIT			BIT(1)
+#define PCIE_USER_LINKUP			0
+#define PHY_RDY_LINKUP				1
+#define LINKUP_ITER_CHECK			5
+
+/* PCIE Message Request */
+#define TX_PCIE_MSG				0x00000620
+#define TX_PCIE_MSG_CNTL			0x00000004
+#define TX_PCIE_MSG_SPEC_LO			0x00000008
+#define TX_PCIE_MSG_SPEC_HI			0x0000000C
+#define TX_PCIE_MSG_DATA			0x00000010
+
+#define MSG_BUSY_BIT				BIT(8)
+#define MSG_EXECUTE_BIT				BIT(0)
+#define MSG_DONE_BIT				BIT(16)
+#define MSG_DONE_STATUS_BIT			(BIT(25) | BIT(24))
+#define RANDOM_DIGIT				0x11223344
+#define PATTRN_SSLP_TLP				0x01005074
+
+/**
+ * struct nwl_msi - MSI information
+ *
+ * @chip: MSI controller
+ * @used: Declare Bitmap for MSI
+ * @domain: IRQ domain pointer
+ * @pages: MSI pages
+ * @lock: mutex lock
+ * @irq_msi0: msi0 interrupt number
+ * @irq_msi1: msi1 interrupt number
+ */
+struct nwl_msi {
+	struct msi_controller chip;
+	DECLARE_BITMAP(used, INT_PCI_MSI_NR);
+	struct irq_domain *domain;
+	unsigned long pages;
+	struct mutex lock;
+	int irq_msi0;
+	int irq_msi1;
+};
+
+/**
+ * struct nwl_pcie - PCIe port information
+ *
+ * @dev: Device pointer
+ * @breg_base: IO Mapped Bridge Register Base
+ * @pcireg_base: IO Mapped PCIe controller attributes
+ * @ecam_base: IO Mapped configuration space
+ * @phys_breg_base: Physical Bridge Register Base
+ * @phys_pcie_reg_base: Physical PCIe Controller Attributes
+ * @phys_ecam_base: Physical Configuration Base
+ * @breg_size: Bridge Register space
+ * @pcie_reg_size: PCIe controller attributes space
+ * @ecam_size: PCIe Configuration space
+ * @irq_intx: Legacy interrupt number
+ * @irq_misc: Misc interrupt number
+ * @ecam_value: ECAM value
+ * @last_busno: Last Bus number configured
+ * @link_up: Link status flag
+ * @enable_msi_fifo: Enable MSI FIFO mode
+ * @bus: PCI bus
+ * @msi: MSI interrupt info
+ */
+struct nwl_pcie {
+	struct device *dev;
+	void __iomem *breg_base;
+	void __iomem *pcireg_base;
+	void __iomem *ecam_base;
+	u32 phys_breg_base;
+	u32 phys_pcie_reg_base;
+	u32 phys_ecam_base;
+	u32 breg_size;
+	u32 pcie_reg_size;
+	u32 ecam_size;
+	int irq_intx;
+	int irq_misc;
+	u32 ecam_value;
+	u8 last_busno;
+	u8 link_up;
+	bool enable_msi_fifo;
+	struct pci_bus *bus;
+	struct nwl_msi msi;
+};
+
+static inline struct nwl_msi *to_nwl_msi(struct msi_controller *chip)
+{
+	return container_of(chip, struct nwl_msi, chip);
+}
+
+static inline u32 nwl_bridge_readl(struct nwl_pcie *pcie, u32 off)
+{
+	return readl(pcie->breg_base + off);
+}
+
+static inline void nwl_bridge_writel(struct nwl_pcie *pcie, u32 val, u32 off)
+{
+	writel(val, pcie->breg_base + off);
+}
+
+static inline bool nwl_pcie_is_link_up(struct nwl_pcie *pcie, u32 check_bit)
+{
+	unsigned int status = -EINVAL;
+
+	if (check_bit == PCIE_USER_LINKUP)
+		status = (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) &
+			  PCIE_PHY_LINKUP_BIT) ? 1 : 0;
+	else if (check_bit == PHY_RDY_LINKUP)
+		status = (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) &
+			  PHY_RDY_LINKUP_BIT) ? 1 : 0;
+	return status;
+}
+
+/**
+ * nwl_pcie_get_config_base - Get configuration base
+ *
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ *
+ * Return: Base address of the configuration space needed to be
+ *	   accessed.
+ */
+static void __iomem *nwl_pcie_get_config_base(struct pci_bus *bus,
+						 unsigned int devfn,
+						 int where)
+{
+	struct nwl_pcie *pcie = bus->sysdata;
+	int relbus;
+
+	relbus = (bus->number << ECAM_BUS_LOC_SHIFT) |
+			(devfn << ECAM_DEV_LOC_SHIFT);
+
+	return pcie->ecam_base + relbus + where;
+}
+
+/**
+ * nwl_setup_sspl - Set Slot Power limit
+ *
+ * @pcie: PCIe port information
+ */
+static int nwl_setup_sspl(struct nwl_pcie *pcie)
+{
+	unsigned int status;
+	int check = 0;
+
+	do {
+		status = nwl_bridge_readl(pcie, TX_PCIE_MSG) & MSG_BUSY_BIT;
+		if (!status) {
+			/*
+			 * Generate the TLP message for a single EP
+			 * [TODO] Add a multi-endpoint code
+			 */
+			nwl_bridge_writel(pcie, 0x0,
+					  TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
+			nwl_bridge_writel(pcie, 0x0,
+					  TX_PCIE_MSG + TX_PCIE_MSG_SPEC_LO);
+			nwl_bridge_writel(pcie, 0x0,
+					  TX_PCIE_MSG + TX_PCIE_MSG_SPEC_HI);
+			nwl_bridge_writel(pcie, 0x0,
+					  TX_PCIE_MSG + TX_PCIE_MSG_DATA);
+			/* Pattern to generate SSLP TLP */
+			nwl_bridge_writel(pcie, PATTRN_SSLP_TLP,
+					  TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
+			nwl_bridge_writel(pcie, RANDOM_DIGIT,
+					  TX_PCIE_MSG + TX_PCIE_MSG_DATA);
+			nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,
+					  TX_PCIE_MSG) | 0x1, TX_PCIE_MSG);
+			status = 0;
+			do {
+				status = nwl_bridge_readl(pcie, TX_PCIE_MSG) &
+							  MSG_DONE_BIT;
+				if (!status && (check < 1)) {
+					mdelay(1);
+					check++;
+				} else {
+					return false;
+				}
+
+			} while (!status);
+			status = nwl_bridge_readl(pcie, TX_PCIE_MSG)
+						  & MSG_DONE_STATUS_BIT;
+		}
+	} while (status);
+
+	return true;
+}
+
+/**
+ * nwl_nwl_readl_config - Read configuration space
+ *
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be read
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success
+ *	   PCIBIOS_DEVICE_NOT_FOUND on failure.
+ */
+static int nwl_nwl_readl_config(struct pci_bus *bus,
+				unsigned int devfn,
+				int where,
+				int size,
+				u32 *val)
+{
+	void __iomem *addr;
+
+	if (!bus->number && devfn > 0) {
+		*val = 0xFFFFFFFF;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	addr = nwl_pcie_get_config_base(bus, devfn, where);
+
+	switch (size) {
+	case 1:
+		*val = readb(addr);
+		break;
+	case 2:
+		*val = readw(addr);
+		break;
+	default:
+		*val = readl(addr);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/**
+ * nwl_nwl_writel_config - Write configuration space
+ *
+ * @bus: Bus structure of current bus
+ * @devfn: Device/function
+ * @where: Offset from base
+ * @size: Byte/word/dword
+ * @val: Value to be written to device
+ *
+ * Return: PCIBIOS_SUCCESSFUL on success,
+ *	   PCIBIOS_DEVICE_NOT_FOUND on failure.
+ */
+static int nwl_nwl_writel_config(struct pci_bus *bus,
+				unsigned int devfn,
+				int where,
+				int size,
+				u32 val)
+{
+	void __iomem *addr;
+	int err = 0;
+	struct nwl_pcie *pcie = bus->sysdata;
+
+	if (!bus->number && devfn > 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	addr = nwl_pcie_get_config_base(bus, devfn, where);
+
+	switch (size) {
+	case 1:
+		writeb(val, addr);
+		break;
+	case 2:
+		writew(val, addr);
+		break;
+	default:
+		writel(val, addr);
+		break;
+	}
+	if (addr == (pcie->ecam_base + PCI_EXP_SLTCAP)) {
+		err = nwl_setup_sspl(pcie);
+		if (!err)
+			return PCIBIOS_SET_FAILED;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCIe operations */
+static struct pci_ops nwl_pcie_ops = {
+	.read  = nwl_nwl_readl_config,
+	.write = nwl_nwl_writel_config,
+};
+
+static irqreturn_t nwl_pcie_misc_handler(int irq, void *data)
+{
+	struct nwl_pcie *pcie = (struct nwl_pcie *)data;
+	u32 misc_stat;
+
+	/* Checking for misc interrupts */
+	misc_stat = nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
+				     MSGF_MISC_SR_MASKALL;
+	if (!misc_stat)
+		return IRQ_NONE;
+
+	if (misc_stat & MSGF_MISC_SR_RXMSG_OVER)
+		dev_err(pcie->dev, "Received Message FIFO Overflow\n");
+
+	if (misc_stat & MSGF_MISC_SR_SLAVE_ERR)
+		dev_err(pcie->dev, "Slave error\n");
+
+	if (misc_stat & MSGF_MISC_SR_MASTER_ERR)
+		dev_err(pcie->dev, "Master error\n");
+
+	if (misc_stat & MSGF_MISC_SR_I_ADDR_ERR)
+		dev_err(pcie->dev,
+			"In Misc Ingress address translation error\n");
+
+	if (misc_stat & MSGF_MISC_SR_E_ADDR_ERR)
+		dev_err(pcie->dev,
+			"In Misc Egress address translation error\n");
+
+	if (misc_stat & MSGF_MISC_SR_PCIE_CORE_ERR)
+		dev_err(pcie->dev, "PCIe Core error\n");
+
+	if (pcie->enable_msi_fifo) {
+		if (misc_stat & MSGF_MISC_SR_RXMSG_AVAIL) {
+			u32 msg_type = nwl_bridge_readl(pcie,
+							MSGF_RX_FIFO_TYPE) &
+							MSGF_RX_FIFO_TYPE_TYPE;
+
+			if (msg_type == MSGF_RX_FIFO_TYPE_MSI) {
+				u32 irq_msi;
+				struct nwl_msi *msi = &pcie->msi;
+				u32 msi_data = nwl_bridge_readl(pcie,
+							MSGF_RX_FIFO_DATA);
+				/* Let all ready be completed before write */
+				rmb();
+				/* POP the FIFO */
+				nwl_bridge_writel(pcie, MSGF_RX_FIFO_POP_POP,
+						  MSGF_RX_FIFO_POP);
+
+				/* Handle the msi virtual interrupt */
+				irq_msi = irq_find_mapping(msi->domain,
+							   msi_data);
+
+				if (irq_msi) {
+					if (test_bit(msi_data, msi->used))
+						generic_handle_irq(irq_msi);
+					else
+						dev_info(pcie->dev,
+							 "unhandled MSI %d\n",
+							 irq_msi);
+				} else {
+					dev_info(pcie->dev, "unexpected MSI\n");
+				}
+			}
+		}
+	}
+	/* Clear misc interrupt status */
+	nwl_bridge_writel(pcie, misc_stat, MSGF_MISC_STATUS);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t nwl_pcie_leg_handler(int irq, void *data)
+{
+	struct nwl_pcie *pcie = (struct nwl_pcie *)data;
+	u32 leg_stat;
+
+	/* Checking for legacy interrupts */
+	leg_stat = nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
+				MSGF_LEG_SR_MASKALL;
+	if (!leg_stat)
+		return IRQ_NONE;
+
+	if (leg_stat & MSGF_LEG_SR_INTA)
+		dev_dbg(pcie->dev, "legacy interruptA\n");
+
+	if (leg_stat & MSGF_LEG_SR_INTB)
+		dev_dbg(pcie->dev, "legacy interruptB\n");
+
+	if (leg_stat & MSGF_LEG_SR_INTC)
+		dev_dbg(pcie->dev, "legacy interruptC\n");
+
+	if (leg_stat & MSGF_LEG_SR_INTD)
+		dev_dbg(pcie->dev, "legacy interruptD\n");
+
+	return IRQ_HANDLED;
+}
+
+static void __nwl_pcie_msi_handler(struct nwl_pcie *pcie,
+					unsigned long reg, u32 val)
+{
+	struct nwl_msi *msi = &pcie->msi;
+	unsigned int offset, index;
+	int irq_msi;
+
+	offset = find_first_bit(&reg, 32);
+	index = offset;
+
+	/* Clear the interrupt */
+	nwl_bridge_writel(pcie, 1 << offset, val);
+
+	/* Handle the msi virtual interrupt */
+	irq_msi = irq_find_mapping(msi->domain, index);
+	if (irq_msi) {
+		if (test_bit(index, msi->used))
+			generic_handle_irq(irq_msi);
+		else
+			dev_info(pcie->dev, "unhandled MSI\n");
+	} else {
+		/* that's weird who triggered this? just clear it */
+		dev_info(pcie->dev, "unexpected MSI\n");
+	}
+}
+
+static irqreturn_t nwl_pcie_msi_handler(int irq, void *data)
+{
+	struct nwl_pcie *pcie = data;
+	unsigned long reg;
+	int processed = 0;
+
+	reg = nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO);
+	if (reg) {
+		__nwl_pcie_msi_handler(pcie, reg, MSGF_MSI_STATUS_LO);
+		processed++;
+	}
+
+	reg = nwl_bridge_readl(pcie, MSGF_MSI_STATUS_HI);
+	if (reg) {
+		__nwl_pcie_msi_handler(pcie, reg, MSGF_MSI_STATUS_HI);
+		processed++;
+	}
+
+	return processed > 0 ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int nwl_msi_alloc(struct nwl_msi *chip)
+{
+	int msi;
+
+	mutex_lock(&chip->lock);
+
+	msi = find_first_zero_bit(chip->used, INT_PCI_MSI_NR);
+	if (msi < INT_PCI_MSI_NR)
+		set_bit(msi, chip->used);
+	else
+		msi = -ENOSPC;
+
+	mutex_unlock(&chip->lock);
+
+	return msi;
+}
+
+static void nwl_msi_free(struct nwl_msi *chip, unsigned long irq)
+{
+	struct device *dev = chip->chip.dev;
+
+	mutex_lock(&chip->lock);
+
+	if (!test_bit(irq, chip->used))
+		dev_err(dev, "trying to free unused MSI#%lu\n", irq);
+	else
+		clear_bit(irq, chip->used);
+
+	mutex_unlock(&chip->lock);
+}
+
+static int nwl_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
+			       struct msi_desc *desc)
+{
+	struct nwl_msi *msi = to_nwl_msi(chip);
+	struct msi_msg msg;
+	unsigned int irq;
+	int hwirq;
+
+	if (desc->msi_attrib.is_msix) {
+		/* currently we are not supporting MSIx */
+		return -ENOSPC;
+	}
+
+	hwirq = nwl_msi_alloc(msi);
+	if (hwirq < 0)
+		return hwirq;
+
+	irq = irq_create_mapping(msi->domain, hwirq);
+	if (!irq)
+		return -EINVAL;
+
+	irq_set_msi_desc(irq, desc);
+
+	msg.address_lo = virt_to_phys((void *)msi->pages);
+	/* 32 bit address only */
+	msg.address_hi = 0;
+	msg.data = hwirq;
+
+	write_msi_msg(irq, &msg);
+
+	return 0;
+}
+
+static void nwl_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
+{
+	struct nwl_msi *msi = to_nwl_msi(chip);
+	struct irq_data *d = irq_get_irq_data(irq);
+
+	nwl_msi_free(msi, d->hwirq);
+}
+
+static struct irq_chip nwl_msi_irq_chip = {
+	.name = "nwl_pcie:msi",
+	.irq_enable = unmask_msi_irq,
+	.irq_disable = mask_msi_irq,
+	.irq_mask = mask_msi_irq,
+	.irq_unmask = unmask_msi_irq,
+};
+
+static int nwl_msi_map(struct irq_domain *domain, unsigned int irq,
+			 irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &nwl_msi_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+	set_irq_flags(irq, IRQF_VALID);
+
+	return 0;
+}
+
+static const struct irq_domain_ops msi_domain_ops = {
+	.map = nwl_msi_map,
+};
+
+static int nwl_pcie_enable_msi(struct nwl_pcie *pcie, struct pci_bus *bus)
+{
+	struct platform_device *pdev = to_platform_device(pcie->dev);
+	struct nwl_msi *msi = &pcie->msi;
+	unsigned long base;
+	int ret;
+
+	mutex_init(&msi->lock);
+
+	/* Assign msi chip hooks */
+	msi->chip.dev = pcie->dev;
+	msi->chip.setup_irq = nwl_msi_setup_irq;
+	msi->chip.teardown_irq = nwl_msi_teardown_irq;
+
+	bus->msi = &msi->chip;
+	/* Allocate linear irq domain */
+	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
+					    &msi_domain_ops, &msi->chip);
+	if (!msi->domain) {
+		dev_err(&pdev->dev, "failed to create IRQ domain\n");
+		return -ENOMEM;
+	}
+
+	/* Check for msii_present bit */
+	ret = nwl_bridge_readl(pcie, I_MSII_CAPABILITIES) & MSII_PRESENT;
+	if (!ret) {
+		dev_err(pcie->dev, "MSI not present\n");
+		ret = -EIO;
+		goto err;
+	}
+
+	/* Enable MSII */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
+			  MSII_ENABLE, I_MSII_CONTROL);
+	if (!pcie->enable_msi_fifo)
+		/* Enable MSII status */
+		nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
+				  MSII_STATUS_ENABLE, I_MSII_CONTROL);
+
+	/* setup AFI/FPCI range */
+	msi->pages = __get_free_pages(GFP_KERNEL, 0);
+	base = virt_to_phys((void *)msi->pages);
+	/* Write base to MSII_BASE_LO */
+	nwl_bridge_writel(pcie, base, I_MSII_BASE_LO);
+
+	/* Write 0x0 to MSII_BASE_HI */
+	nwl_bridge_writel(pcie, 0x0, I_MSII_BASE_HI);
+
+	/* Disable high range msi interrupts */
+	nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
+
+	/* Clear pending high range msi interrupts */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,  MSGF_MSI_STATUS_HI) &
+			  MSGF_MSI_SR_HI_MASK, MSGF_MSI_STATUS_HI);
+	/* Get msi_1 IRQ number */
+	msi->irq_msi1 = platform_get_irq_byname(pdev, "msi_1");
+	if (msi->irq_msi1 < 0) {
+		dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi1);
+		goto err;
+	}
+	/* Register msi handler */
+	ret = devm_request_irq(pcie->dev, msi->irq_msi1, nwl_pcie_msi_handler,
+			       0, nwl_msi_irq_chip.name, pcie);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request IRQ#%d\n",
+					msi->irq_msi1);
+		goto err;
+	}
+
+	/* Enable all high range msi interrupts */
+	nwl_bridge_writel(pcie, MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
+
+	/* Disable low range msi interrupts */
+	nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
+
+	/* Clear pending low range msi interrupts */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO) &
+			  MSGF_MSI_SR_LO_MASK, MSGF_MSI_STATUS_LO);
+	/* Get msi_0 IRQ number */
+	msi->irq_msi0 = platform_get_irq_byname(pdev, "msi_0");
+	if (msi->irq_msi0 < 0) {
+		dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi0);
+		goto err;
+	}
+	/* Register msi handler */
+	ret = devm_request_irq(pcie->dev, msi->irq_msi0, nwl_pcie_msi_handler,
+			       0, nwl_msi_irq_chip.name, pcie);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to request IRQ#%d\n",
+					msi->irq_msi0);
+		goto err;
+	}
+	/* Enable all low range msi interrupts */
+	nwl_bridge_writel(pcie, MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
+
+	return 0;
+err:
+	irq_domain_remove(msi->domain);
+	return ret;
+}
+
+static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
+{
+	struct platform_device *pdev = to_platform_device(pcie->dev);
+	u32 breg_val, ecam_val, first_busno = 0;
+	int err;
+	int check_link_up = 0;
+
+	/* Check for BREG present bit */
+	breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
+	if (!breg_val) {
+		dev_err(pcie->dev, "BREG is not present\n");
+		return breg_val;
+	}
+	/* Write bridge_off to breg base */
+	nwl_bridge_writel(pcie, (u32)(pcie->phys_breg_base),
+			  E_BREG_BASE_LO);
+
+	/* Enable BREG */
+	nwl_bridge_writel(pcie, ~BREG_ENABLE_FORCE & BREG_ENABLE,
+			  E_BREG_CONTROL);
+
+	/* Disable DMA channel registers */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX0) |
+			  CFG_DMA_REG_BAR, BRCFG_PCIE_RX0);
+
+	/* Enable the bridge config interrupt */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_INTERRUPT) |
+			  BRCFG_INTERRUPT_MASK, BRCFG_INTERRUPT);
+	/* Enable Ingress subtractive decode translation */
+	nwl_bridge_writel(pcie, SET_ISUB_CONTROL, I_ISUB_CONTROL);
+
+	/* Enable msg filtering details */
+	nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
+			  BRCFG_PCIE_RX_MSG_FILTER);
+	do {
+		err = nwl_pcie_is_link_up(pcie, PHY_RDY_LINKUP);
+		if (err != 1) {
+			check_link_up++;
+			if (check_link_up > LINKUP_ITER_CHECK)
+				return -ENODEV;
+		}
+	} while (!err);
+
+	/* Check for ECAM present bit */
+	ecam_val = nwl_bridge_readl(pcie, E_ECAM_CAPABILITIES) & E_ECAM_PRESENT;
+	if (!ecam_val) {
+		dev_err(pcie->dev, "ECAM is not present\n");
+		return ecam_val;
+	}
+
+	/* Enable ECAM */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
+			  E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
+	/* Write ecam_value on ecam_control */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
+			  (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
+			  E_ECAM_CONTROL);
+	/* Write phy_reg_base to ecam base */
+	nwl_bridge_writel(pcie, (u32)pcie->phys_ecam_base, E_ECAM_BASE_LO);
+
+	/* Get bus range */
+	ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
+	pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
+	/* Write primary, secondary and subordinate bus numbers */
+	ecam_val = first_busno;
+	ecam_val |= (first_busno + 1) << 8;
+	ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
+	writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
+
+	/* Check if PCIe link is up? */
+	pcie->link_up = nwl_pcie_is_link_up(pcie, PCIE_USER_LINKUP);
+	if (!pcie->link_up)
+		dev_info(pcie->dev, "Link is DOWN\n");
+	else
+		dev_info(pcie->dev, "Link is UP\n");
+
+	/* Disable all misc interrupts */
+	nwl_bridge_writel(pcie, (u32)~MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
+
+	/* Clear pending misc interrupts */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
+			  MSGF_MISC_SR_MASKALL, MSGF_MISC_STATUS);
+
+	/* Get misc IRQ number */
+	pcie->irq_misc = platform_get_irq_byname(pdev, "misc");
+	if (pcie->irq_misc < 0) {
+		dev_err(&pdev->dev, "failed to get misc IRQ#%d\n",
+			pcie->irq_misc);
+		return pcie->irq_misc;
+	}
+	/* Register misc handler */
+	err = devm_request_irq(pcie->dev, pcie->irq_misc,
+			       nwl_pcie_misc_handler, IRQF_SHARED,
+			       "nwl_pcie:misc", pcie);
+	if (err) {
+		dev_err(pcie->dev, "fail to register misc IRQ#%d\n",
+			pcie->irq_misc);
+		return err;
+	}
+	/* Enable all misc interrupts */
+	nwl_bridge_writel(pcie, MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
+
+	/* Disable all legacy interrupts */
+	nwl_bridge_writel(pcie, (u32)~MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
+
+	/* Clear pending legacy interrupts */
+	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
+			  MSGF_LEG_SR_MASKALL, MSGF_LEG_STATUS);
+	/* Get intx IRQ number */
+	pcie->irq_intx = platform_get_irq_byname(pdev, "intx");
+	if (pcie->irq_intx < 0) {
+		dev_err(&pdev->dev, "failed to get intx IRQ#%d\n",
+			pcie->irq_intx);
+		return pcie->irq_intx;
+	}
+
+	/* Register intx handler */
+	err = devm_request_irq(pcie->dev, pcie->irq_intx,
+			       nwl_pcie_leg_handler, IRQF_SHARED,
+			       "nwl_pcie:intx", pcie);
+	if (err) {
+		dev_err(pcie->dev, "fail to register intx IRQ#%d\n",
+			pcie->irq_intx);
+		return err;
+	}
+	/* Enable all legacy interrupts */
+	nwl_bridge_writel(pcie, MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
+
+	return 0;
+}
+
+static int nwl_pcie_parse_dt(struct nwl_pcie *pcie,
+					struct platform_device *pdev)
+{
+	struct device_node *node = pcie->dev->of_node;
+	struct resource *res;
+	const char *type;
+
+	/* Check for device type */
+	type = of_get_property(node, "device_type", NULL);
+	if (!type || strcmp(type, "pci")) {
+		dev_err(pcie->dev, "invalid \"device_type\" %s\n", type);
+		return -EINVAL;
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "breg");
+	pcie->breg_base = devm_ioremap_resource(pcie->dev, res);
+	if (IS_ERR(pcie->breg_base))
+		return PTR_ERR(pcie->breg_base);
+	pcie->phys_breg_base = res->start;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcireg");
+	pcie->pcireg_base = devm_ioremap_resource(pcie->dev, res);
+	if (IS_ERR(pcie->pcireg_base))
+		return PTR_ERR(pcie->pcireg_base);
+	pcie->phys_pcie_reg_base = res->start;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
+	pcie->ecam_base = devm_ioremap_resource(pcie->dev, res);
+	if (IS_ERR(pcie->ecam_base))
+		return PTR_ERR(pcie->ecam_base);
+	pcie->phys_ecam_base = res->start;
+
+	pcie->enable_msi_fifo = of_property_read_bool(node, "xlnx,msi-fifo");
+
+	return 0;
+}
+
+static const struct of_device_id nwl_pcie_of_match[] = {
+	{ .compatible = "xlnx,nwl-pcie-2.11", },
+	{}
+};
+
+static int nwl_pcie_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct nwl_pcie *pcie;
+	struct pci_bus *bus;
+	int err;
+
+	resource_size_t iobase = 0;
+	LIST_HEAD(res);
+
+	/* Allocate private nwl_pcie struct */
+	pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	/* Set ecam value */
+	pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
+
+	pcie->dev = &pdev->dev;
+
+	/* Parse the device tree */
+	err = nwl_pcie_parse_dt(pcie, pdev);
+	if (err) {
+		dev_err(pcie->dev, "Parsing DT failed\n");
+		return err;
+	}
+	/* Bridge initialization */
+	err = nwl_pcie_bridge_init(pcie);
+	if (err) {
+		dev_err(pcie->dev, "HW Initalization failed\n");
+		return err;
+	}
+
+	err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
+	if (err) {
+		pr_err("Getting bridge resources failed\n");
+		return err;
+	}
+	bus = pci_create_root_bus(&pdev->dev, 0,
+				  &nwl_pcie_ops, pcie, &res);
+	if (!bus)
+		return -ENOMEM;
+
+	/* Enable MSI */
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		err = nwl_pcie_enable_msi(pcie, bus);
+		if (err < 0) {
+			dev_err(&pdev->dev,
+				"failed to enable MSI support: %d\n",
+				err);
+			return err;
+		}
+	}
+	pci_scan_child_bus(bus);
+	pci_assign_unassigned_bus_resources(bus);
+	pci_bus_add_devices(bus);
+	platform_set_drvdata(pdev, pcie);
+
+	return 0;
+}
+
+static int nwl_pcie_remove(struct platform_device *pdev)
+{
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver nwl_pcie_driver = {
+	.driver = {
+		.name = "nwl-pcie",
+		.of_match_table = nwl_pcie_of_match,
+	},
+	.probe = nwl_pcie_probe,
+	.remove = nwl_pcie_remove,
+};
+module_platform_driver(nwl_pcie_driver);
+
+MODULE_AUTHOR("Xilinx, Inc");
+MODULE_DESCRIPTION("NWL PCIe driver");
+MODULE_LICENSE("GPL");