| Message ID | 1443193831-5693-1-git-send-email-robertcnelson@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 09/25/2015 10:10 AM, Robert Nelson wrote: > SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus > the HDMI port and addition of two Grove connectors (i2c2 and usart2). > > This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom: > 1A: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|] > > http://beagleboard.org/green > http://www.seeedstudio.com/wiki/Beaglebone_green > > Signed-off-by: Robert Nelson <robertcnelson@gmail.com> > CC: Tony Lindgren <tony@atomide.com> > CC: Jason Kridner <jkridner@gmail.com> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/am335x-bonegreen.dts | 53 ++++++++++++++++++++++++++++++++++ > 2 files changed, 54 insertions(+) > create mode 100644 arch/arm/boot/dts/am335x-bonegreen.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 233159d..e45d771 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -446,6 +446,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ > am335x-base0033.dtb \ > am335x-bone.dtb \ > am335x-boneblack.dtb \ > + am335x-bonegreen.dtb \ > am335x-sl50.dtb \ > am335x-evm.dtb \ > am335x-evmsk.dtb \ > diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts > new file mode 100644 > index 0000000..0f65bda > --- /dev/null > +++ b/arch/arm/boot/dts/am335x-bonegreen.dts > @@ -0,0 +1,53 @@ > +/* > + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +/dts-v1/; > + > +#include "am33xx.dtsi" > +#include "am335x-bone-common.dtsi" > + > +/ { > + model = "TI AM335x BeagleBone Green"; > + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; > +}; > + > +&ldo3_reg { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > +}; > + > +&mmc1 { > + vmmc-supply = <&vmmcsd_fixed>; > +}; > + > +&mmc2 { > + vmmc-supply = <&vmmcsd_fixed>; > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_pins>; > + bus-width = <8>; > + status = "okay"; > +}; > + > +&am33xx_pinmux { > + uart2_pins: uart2_pins { > + pinctrl-single,pins = < > + 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ > + 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ > + >; > + }; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart2_pins>; > + status = "okay"; > +}; > + > +&rtc { > + system-power-controller; > +}; > Would still work when https://patchwork.kernel.org/patch/6394821/ gets in?
On Fri, Sep 25, 2015 at 11:03 AM, Nishanth Menon <nm@ti.com> wrote: > On 09/25/2015 10:10 AM, Robert Nelson wrote: >> SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus >> the HDMI port and addition of two Grove connectors (i2c2 and usart2). >> >> This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom: >> 1A: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|] >> >> http://beagleboard.org/green >> http://www.seeedstudio.com/wiki/Beaglebone_green >> >> Signed-off-by: Robert Nelson <robertcnelson@gmail.com> >> CC: Tony Lindgren <tony@atomide.com> >> CC: Jason Kridner <jkridner@gmail.com> >> --- >> arch/arm/boot/dts/Makefile | 1 + >> arch/arm/boot/dts/am335x-bonegreen.dts | 53 ++++++++++++++++++++++++++++++++++ >> 2 files changed, 54 insertions(+) >> create mode 100644 arch/arm/boot/dts/am335x-bonegreen.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index 233159d..e45d771 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -446,6 +446,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ >> am335x-base0033.dtb \ >> am335x-bone.dtb \ >> am335x-boneblack.dtb \ >> + am335x-bonegreen.dtb \ >> am335x-sl50.dtb \ >> am335x-evm.dtb \ >> am335x-evmsk.dtb \ >> diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts >> new file mode 100644 >> index 0000000..0f65bda >> --- /dev/null >> +++ b/arch/arm/boot/dts/am335x-bonegreen.dts >> @@ -0,0 +1,53 @@ >> +/* >> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> +/dts-v1/; >> + >> +#include "am33xx.dtsi" >> +#include "am335x-bone-common.dtsi" >> + >> +/ { >> + model = "TI AM335x BeagleBone Green"; >> + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; >> +}; >> + >> +&ldo3_reg { >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-always-on; >> +}; >> + >> +&mmc1 { >> + vmmc-supply = <&vmmcsd_fixed>; >> +}; >> + >> +&mmc2 { >> + vmmc-supply = <&vmmcsd_fixed>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&emmc_pins>; >> + bus-width = <8>; >> + status = "okay"; >> +}; >> + >> +&am33xx_pinmux { >> + uart2_pins: uart2_pins { >> + pinctrl-single,pins = < >> + 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ >> + 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ >> + >; >> + }; >> +}; >> + >> +&uart2 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart2_pins>; >> + status = "okay"; >> +}; >> + >> +&rtc { >> + system-power-controller; >> +}; >> > > > Would still work when https://patchwork.kernel.org/patch/6394821/ gets in? That will still work, but we need to extend the board identification to "board-name" + "board-revision", as the Green choose the "A335BNLT" board name in the eeprom to remain compatible with older 3.8.x images from last year.. (most of the clones i've talked too want to support the old image too)... So with the 1st byte of the board-revision: All BeagleBone Black's have: 0x30 Seeed's using 0x1A (with the potential to increment the A) Regards,
>> >> Would still work when https://patchwork.kernel.org/patch/6394821/ gets in? > > That will still work, but we need to extend the board identification > to "board-name" + "board-revision", as the Green choose the "A335BNLT" > board name in the eeprom to remain compatible with older 3.8.x images > from last year.. (most of the clones i've talked too want to support > the old image too)... > > So with the 1st byte of the board-revision: > All BeagleBone Black's have: 0x30 > Seeed's using 0x1A (with the potential to increment the A) I should add, we have an official-ish list at the top of (1), to help keep track of this... 1: https://github.com/beagleboard/image-builder/blob/master/readme.md Regards,
* Robert Nelson <robertcnelson@gmail.com> [150925 08:14]: > SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus > the HDMI port and addition of two Grove connectors (i2c2 and usart2). > > This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom: > 1A: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|] > > http://beagleboard.org/green > http://www.seeedstudio.com/wiki/Beaglebone_green Thanks applying into omap-for-v4.4/dt. Tony
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d..e45d771 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -446,6 +446,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-bonegreen.dtb \ am335x-sl50.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts new file mode 100644 index 0000000..0f65bda --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + uart2_pins: uart2_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&rtc { + system-power-controller; +};
SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus the HDMI port and addition of two Grove connectors (i2c2 and usart2). This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom: 1A: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|] http://beagleboard.org/green http://www.seeedstudio.com/wiki/Beaglebone_green Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Jason Kridner <jkridner@gmail.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am335x-bonegreen.dts | 53 ++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/am335x-bonegreen.dts