| Message ID | 1443605838-5948-1-git-send-email-chaotian.jing@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 30/09/15 12:37, Chaotian Jing wrote: > When get a CRC error, start the mmc_retune, it will issue CMD19/CMD21 > to do tune, assume there were 10 clock phase need to try, phase 0 to > phase 6 is ok, phase 7 to phase 9 is NG, we try it from 0 to 9, so > the last CMD19/CMD21 will get CRC error, host->need_retune was set and > cause mmc_retune was called, then dead loop of mmc_retune > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Wasn't my idea to have this CRC checking in the core ;-) and sdhci doesn't put it's tuning commands through a mmc request so it doesn't see this issue. But definitely the CRC logic is not meant for the tuning commands, so Acked-by: Adrian Hunter <adrian.hunter@intel.com> > --- > drivers/mmc/core/core.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > index 0520064..a3eb20b 100644 > --- a/drivers/mmc/core/core.c > +++ b/drivers/mmc/core/core.c > @@ -134,9 +134,11 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) > int err = cmd->error; > > /* Flag re-tuning needed on CRC errors */ > - if (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) || > + if ((cmd->opcode != MMC_SEND_TUNING_BLOCK && > + cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) && > + (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) || > (mrq->data && mrq->data->error == -EILSEQ) || > - (mrq->stop && mrq->stop->error == -EILSEQ)) > + (mrq->stop && mrq->stop->error == -EILSEQ))) > mmc_retune_needed(host); > > if (err && cmd->retries && mmc_host_is_spi(host)) { > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 30 September 2015 at 14:01, Adrian Hunter <adrian.hunter@intel.com> wrote: > On 30/09/15 12:37, Chaotian Jing wrote: >> When get a CRC error, start the mmc_retune, it will issue CMD19/CMD21 >> to do tune, assume there were 10 clock phase need to try, phase 0 to >> phase 6 is ok, phase 7 to phase 9 is NG, we try it from 0 to 9, so >> the last CMD19/CMD21 will get CRC error, host->need_retune was set and >> cause mmc_retune was called, then dead loop of mmc_retune >> >> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > Wasn't my idea to have this CRC checking in the core ;-) and sdhci > doesn't put it's tuning commands through a mmc request so it doesn't > see this issue. That's not true for all sdhci variants. For those that uses sdhci's ->platform_execute_tuning() callback, all uses mmc_send_tuning(). I think for sdhci's default tuning path, we should change to use mmc_send_tuning() and thus we would potentially hit this problem as well. > > But definitely the CRC logic is not meant for the tuning commands, so > > Acked-by: Adrian Hunter <adrian.hunter@intel.com> Thanks for reviewing Adrian and for keeping an eye on "tuning" related patches. Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 30 September 2015 at 11:37, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > When get a CRC error, start the mmc_retune, it will issue CMD19/CMD21 > to do tune, assume there were 10 clock phase need to try, phase 0 to > phase 6 is ok, phase 7 to phase 9 is NG, we try it from 0 to 9, so > the last CMD19/CMD21 will get CRC error, host->need_retune was set and > cause mmc_retune was called, then dead loop of mmc_retune > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Thanks Chaotian! I have applied this for fixes and added the following tag: Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors") Kind regards Uffe > --- > drivers/mmc/core/core.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c > index 0520064..a3eb20b 100644 > --- a/drivers/mmc/core/core.c > +++ b/drivers/mmc/core/core.c > @@ -134,9 +134,11 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) > int err = cmd->error; > > /* Flag re-tuning needed on CRC errors */ > - if (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) || > + if ((cmd->opcode != MMC_SEND_TUNING_BLOCK && > + cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) && > + (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) || > (mrq->data && mrq->data->error == -EILSEQ) || > - (mrq->stop && mrq->stop->error == -EILSEQ)) > + (mrq->stop && mrq->stop->error == -EILSEQ))) > mmc_retune_needed(host); > > if (err && cmd->retries && mmc_host_is_spi(host)) { > -- > 1.8.1.1.dirty > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 0520064..a3eb20b 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -134,9 +134,11 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq) int err = cmd->error; /* Flag re-tuning needed on CRC errors */ - if (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) || + if ((cmd->opcode != MMC_SEND_TUNING_BLOCK && + cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200) && + (err == -EILSEQ || (mrq->sbc && mrq->sbc->error == -EILSEQ) || (mrq->data && mrq->data->error == -EILSEQ) || - (mrq->stop && mrq->stop->error == -EILSEQ)) + (mrq->stop && mrq->stop->error == -EILSEQ))) mmc_retune_needed(host); if (err && cmd->retries && mmc_host_is_spi(host)) {
When get a CRC error, start the mmc_retune, it will issue CMD19/CMD21 to do tune, assume there were 10 clock phase need to try, phase 0 to phase 6 is ok, phase 7 to phase 9 is NG, we try it from 0 to 9, so the last CMD19/CMD21 will get CRC error, host->need_retune was set and cause mmc_retune was called, then dead loop of mmc_retune Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> --- drivers/mmc/core/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)