diff mbox

[v2,1/2] dma: pxa_dma: fix the no-requestor case

Message ID 1443634935-28989-1-git-send-email-robert.jarzmik@free.fr (mailing list archive)
State New, archived
Headers show

Commit Message

Robert Jarzmik Sept. 30, 2015, 5:42 p.m. UTC 
A very small number of devices don't use the flow control offered by
requestor lines. In these specific cases, the pxa dma driver should be
aware of that and not try to use a requestor line.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v1: rebase on v4.3-rc3
---
 drivers/dma/pxa_dma.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

Comments

Vinod Koul Oct. 1, 2015, 2:15 a.m. UTC | #1 
On Wed, Sep 30, 2015 at 07:42:14PM +0200, Robert Jarzmik wrote:
> A very small number of devices don't use the flow control offered by
> requestor lines. In these specific cases, the pxa dma driver should be
> aware of that and not try to use a requestor line.

Applied both now

Btw what happened to subsytem name here!!
diff mbox

Patch

diff --git a/drivers/dma/pxa_dma.c b/drivers/dma/pxa_dma.c
index 5cb61ce01036..7d3ff56caa0a 100644
--- a/drivers/dma/pxa_dma.c
+++ b/drivers/dma/pxa_dma.c
@@ -473,8 +473,10 @@  static void pxad_free_phy(struct pxad_chan *chan)
 		return;
 
 	/* clear the channel mapping in DRCMR */
-	reg = pxad_drcmr(chan->drcmr);
-	writel_relaxed(0, chan->phy->base + reg);
+	if (chan->drcmr <= DRCMR_CHLNUM) {
+		reg = pxad_drcmr(chan->drcmr);
+		writel_relaxed(0, chan->phy->base + reg);
+	}
 
 	spin_lock_irqsave(&pdev->phy_lock, flags);
 	for (i = 0; i < 32; i++)
@@ -516,8 +518,10 @@  static void phy_enable(struct pxad_phy *phy, bool misaligned)
 		"%s(); phy=%p(%d) misaligned=%d\n", __func__,
 		phy, phy->idx, misaligned);
 
-	reg = pxad_drcmr(phy->vchan->drcmr);
-	writel_relaxed(DRCMR_MAPVLD | phy->idx, phy->base + reg);
+	if (phy->vchan->drcmr <= DRCMR_CHLNUM) {
+		reg = pxad_drcmr(phy->vchan->drcmr);
+		writel_relaxed(DRCMR_MAPVLD | phy->idx, phy->base + reg);
+	}
 
 	dalgn = phy_readl_relaxed(phy, DALGN);
 	if (misaligned)
@@ -910,14 +914,18 @@  static void pxad_get_config(struct pxad_chan *chan,
 		width = chan->cfg.src_addr_width;
 		dev_addr = chan->cfg.src_addr;
 		*dev_src = dev_addr;
-		*dcmd |= PXA_DCMD_INCTRGADDR | PXA_DCMD_FLOWSRC;
+		*dcmd |= PXA_DCMD_INCTRGADDR;
+		if (chan->drcmr <= DRCMR_CHLNUM)
+			*dcmd |= PXA_DCMD_FLOWSRC;
 	}
 	if (dir == DMA_MEM_TO_DEV) {
 		maxburst = chan->cfg.dst_maxburst;
 		width = chan->cfg.dst_addr_width;
 		dev_addr = chan->cfg.dst_addr;
 		*dev_dst = dev_addr;
-		*dcmd |= PXA_DCMD_INCSRCADDR | PXA_DCMD_FLOWTRG;
+		*dcmd |= PXA_DCMD_INCSRCADDR;
+		if (chan->drcmr <= DRCMR_CHLNUM)
+			*dcmd |= PXA_DCMD_FLOWTRG;
 	}
 	if (dir == DMA_MEM_TO_MEM)
 		*dcmd |= PXA_DCMD_BURST32 | PXA_DCMD_INCTRGADDR |