| Message ID | 1443693464-5581-1-git-send-email-sagar.a.kamble@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Oct 01, 2015 at 03:27:44PM +0530, Sagar Arun Kamble wrote: > When using RC6 timeout mode, the timeout value > should be written to GEN6_RC6_THRESHOLD. > > v2: Updated commit message. (Tom) > > Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> When resending a patch which already has an r-b and you don't add that nore Cc: the reviewer then that just wastes people time. Also this patch should have a "v3: Rebase over whitespace differences" line. Please retry, thanks. -Daniel > --- > drivers/gpu/drm/i915/intel_pm.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c > index c98eee6..c16f496 100644 > --- a/drivers/gpu/drm/i915/intel_pm.c > +++ b/drivers/gpu/drm/i915/intel_pm.c > @@ -4791,7 +4791,6 @@ static void gen9_enable_rc6(struct drm_device *dev) > I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA); > > I915_WRITE(GEN6_RC_SLEEP, 0); > - I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */ > > /* 2c: Program Coarse Power Gating Policies. */ > I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 25); > @@ -4802,16 +4801,19 @@ static void gen9_enable_rc6(struct drm_device *dev) > rc6_mask = GEN6_RC_CTL_RC6_ENABLE; > DRM_INFO("RC6 %s\n", (rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ? > "on" : "off"); > - > + /* WaRsUseTimeoutMode */ > if ((IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_D0) || > - (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A0)) > + (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A0)) { > + I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us */ > I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | > GEN7_RC_CTL_TO_MODE | > rc6_mask); > - else > + } else { > + I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */ > I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | > GEN6_RC_CTL_EI_MODE(1) | > rc6_mask); > + } > > /* > * 3b: Enable Coarse Power Gating only when RC6 is enabled. > -- > 1.9.1 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index c98eee6..c16f496 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4791,7 +4791,6 @@ static void gen9_enable_rc6(struct drm_device *dev) I915_WRITE(GUC_MAX_IDLE_COUNT, 0xA); I915_WRITE(GEN6_RC_SLEEP, 0); - I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */ /* 2c: Program Coarse Power Gating Policies. */ I915_WRITE(GEN9_MEDIA_PG_IDLE_HYSTERESIS, 25); @@ -4802,16 +4801,19 @@ static void gen9_enable_rc6(struct drm_device *dev) rc6_mask = GEN6_RC_CTL_RC6_ENABLE; DRM_INFO("RC6 %s\n", (rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ? "on" : "off"); - + /* WaRsUseTimeoutMode */ if ((IS_SKYLAKE(dev) && INTEL_REVID(dev) <= SKL_REVID_D0) || - (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A0)) + (IS_BROXTON(dev) && INTEL_REVID(dev) <= BXT_REVID_A0)) { + I915_WRITE(GEN6_RC6_THRESHOLD, 625); /* 800us */ I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | GEN7_RC_CTL_TO_MODE | rc6_mask); - else + } else { + I915_WRITE(GEN6_RC6_THRESHOLD, 37500); /* 37.5/125ms per EI */ I915_WRITE(GEN6_RC_CONTROL, GEN6_RC_CTL_HW_ENABLE | GEN6_RC_CTL_EI_MODE(1) | rc6_mask); + } /* * 3b: Enable Coarse Power Gating only when RC6 is enabled.
When using RC6 timeout mode, the timeout value should be written to GEN6_RC6_THRESHOLD. v2: Updated commit message. (Tom) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> --- drivers/gpu/drm/i915/intel_pm.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)