| Message ID | 1443559446-26969-10-git-send-email-balbi@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Sep 29, 2015 at 1:44 PM, Felipe Balbi <balbi@ti.com> wrote: > Introduce a new clocksource driver for Texas > Instruments 32.768 Hz device which is available > on most OMAP-like devices. > > Signed-off-by: Felipe Balbi <balbi@ti.com> > --- > drivers/clocksource/Kconfig | 8 +++ > drivers/clocksource/Makefile | 1 + > drivers/clocksource/timer-ti-32k.c | 121 +++++++++++++++++++++++++++++++++++++ > 3 files changed, 130 insertions(+) > create mode 100644 drivers/clocksource/timer-ti-32k.c > > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig > index a7726db13abb..0ccfd12a00a3 100644 > --- a/drivers/clocksource/Kconfig > +++ b/drivers/clocksource/Kconfig > @@ -115,6 +115,14 @@ config CLKSRC_PISTACHIO > bool > select CLKSRC_OF > > +config CLKSRC_TI_32K > + bool "Texas Instruments 32.768 Hz Clocksource" > + depends on OF && ARCH_OMAP2PLUS > + select CLKSRC_OF > + help > + This option enables support for Texas Instruments 32.768 Hz clocksource > + available on many OMAP-like platforms. > + > config CLKSRC_STM32 > bool "Clocksource for STM32 SoCs" if !ARCH_STM32 > depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST) > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile > index 5c00863c3e33..749abc3665b3 100644 > --- a/drivers/clocksource/Makefile > +++ b/drivers/clocksource/Makefile > @@ -45,6 +45,7 @@ obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o > obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o > obj-$(CONFIG_MTK_TIMER) += mtk_timer.o > obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o > +obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o > > obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o > obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o > diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c > new file mode 100644 > index 000000000000..10ccce2eb645 > --- /dev/null > +++ b/drivers/clocksource/timer-ti-32k.c > @@ -0,0 +1,121 @@ > +/** > + * timer-ti-32k.c - OMAP2 32k Timer Support > + * > + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 of > + * the License as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/init.h> > +#include <linux/time.h> > +#include <linux/interrupt.h> > +#include <linux/err.h> > +#include <linux/irq.h> > +#include <linux/sched_clock.h> > +#include <linux/clocksource.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > + > +#include <asm/mach/time.h> > + > +/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ > +#define OMAP2_32KSYNCNT_REV_OFF 0x0 > +#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) > +#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 > +#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 > + > +/* > + * 32KHz clocksource ... always available, on pretty most chips except > + * OMAP 730 and 1510. Other timers could be used as clocksources, with > + * higher resolution in free-running counter modes (e.g. 12 MHz xtal), > + * but systems won't necessarily want to spend resources that way. > + */ > +static void __iomem *sync32k_cnt_reg; > + > +/** > + * omap_read_persistent_clock64 - Return time from a persistent clock. > + * > + * Reads the time from a source which isn't disabled during PM, the > + * 32k sync timer. Convert the cycles elapsed since last read into > + * nsecs and adds to a monotonically increasing timespec64. > + */ > +static struct timespec64 persistent_ts; > +static cycles_t cycles; > +static unsigned int persistent_mult, persistent_shift; > + > +static u64 notrace omap_32k_read_sched_clock(void) > +{ > + return readl_relaxed(sync32k_cnt_reg); > +} > + > +static void omap_read_persistent_clock64(struct timespec64 *ts) > +{ > + unsigned long long nsecs; > + cycles_t last_cycles; > + > + last_cycles = cycles; > + cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; > + > + nsecs = clocksource_cyc2ns(cycles - last_cycles, > + persistent_mult, persistent_shift); > + > + timespec64_add_ns(&persistent_ts, nsecs); > + > + *ts = persistent_ts; > +} So this doesn't look to really be a persistent clock (like an RTC), and is more just a clock that doesn't halt in suspend, right? (I know some devices used this trick to provide suspend timing w/o an RTC). That said, we do now support CLOCK_SOURCE_SUSPEND_NONSTOP, which allows us to do suspend timing from the clocksource itself, so you should be able to add that flag to the clocksource flags and drop all the persistent clock bit here. thanks -john -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Felipe, On 09/29/2015 10:44 PM, Felipe Balbi wrote: > Introduce a new clocksource driver for Texas > Instruments 32.768 Hz device which is available > on most OMAP-like devices. > > Signed-off-by: Felipe Balbi <balbi@ti.com> > --- [ ... ] > +config CLKSRC_TI_32K > + bool "Texas Instruments 32.768 Hz Clocksource" > + depends on OF && ARCH_OMAP2PLUS > + select CLKSRC_OF > + help > + This option enables support for Texas Instruments 32.768 Hz clocksource > + available on many OMAP-like platforms. > + It is the omap's Kconfig which should select the timer, not the user to enable the timer. It should be something like: config CLKSRC_TI_32K bool "Texas Instruments 32.768 Hz Clocksource" if COMPILE_TEST select CLKSRC_OF if OF help This option enables support for Texas Instruments 32.768 Hz clocksource available on many OMAP-like platforms. And in the omap's Kconfig: select CLKSRC_TI_32K > config CLKSRC_STM32 > bool "Clocksource for STM32 SoCs" if !ARCH_STM32 > depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST) > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile > index 5c00863c3e33..749abc3665b3 100644 > --- a/drivers/clocksource/Makefile > +++ b/drivers/clocksource/Makefile > @@ -45,6 +45,7 @@ obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o > obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o > obj-$(CONFIG_MTK_TIMER) += mtk_timer.o > obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o > +obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o > > obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o > obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o > diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c > new file mode 100644 > index 000000000000..10ccce2eb645 > --- /dev/null > +++ b/drivers/clocksource/timer-ti-32k.c > @@ -0,0 +1,121 @@ > +/** > + * timer-ti-32k.c - OMAP2 32k Timer Support > + * > + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 of > + * the License as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program. If not, see <http://www.gnu.org/licenses/>. > + */ > + > +#include <linux/init.h> > +#include <linux/time.h> > +#include <linux/interrupt.h> > +#include <linux/err.h> > +#include <linux/irq.h> > +#include <linux/sched_clock.h> > +#include <linux/clocksource.h> > +#include <linux/slab.h> > +#include <linux/of.h> > +#include <linux/of_address.h> > +#include <linux/of_irq.h> > + > +#include <asm/mach/time.h> Can you check all these headers are needed ? I don't think interrupt.h, or slab.h or irq.h, etc ... are needed. A few nits below: > +/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ I am not sure this comment gives some interesting indication. > +#define OMAP2_32KSYNCNT_REV_OFF 0x0 > +#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) > +#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 > +#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 > + > +/* > + * 32KHz clocksource ... always available, on pretty most chips except > + * OMAP 730 and 1510. Other timers could be used as clocksources, with > + * higher resolution in free-running counter modes (e.g. 12 MHz xtal), > + * but systems won't necessarily want to spend resources that way. > + */ > +static void __iomem *sync32k_cnt_reg; > + > +/** > + * omap_read_persistent_clock64 - Return time from a persistent clock. > + * > + * Reads the time from a source which isn't disabled during PM, the > + * 32k sync timer. Convert the cycles elapsed since last read into > + * nsecs and adds to a monotonically increasing timespec64. > + */ This comment above should be moved right before the function it describes and in order to comply with the kernel-doc format the parameters must be documented also: ... * @ts: .... ... > +static struct timespec64 persistent_ts; > +static cycles_t cycles; > +static unsigned int persistent_mult, persistent_shift; > + > +static u64 notrace omap_32k_read_sched_clock(void) > +{ > + return readl_relaxed(sync32k_cnt_reg); > +} > + > +static void omap_read_persistent_clock64(struct timespec64 *ts) > +{ > + unsigned long long nsecs; > + cycles_t last_cycles; > + > + last_cycles = cycles; > + cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; This test is pointless because 'sync32k_cnt_reg' is always different from zero regarding the init routine, no ? > + > + nsecs = clocksource_cyc2ns(cycles - last_cycles, > + persistent_mult, persistent_shift); > + > + timespec64_add_ns(&persistent_ts, nsecs); > + > + *ts = persistent_ts; > +} > + > +static void __init ti_32k_timer_init(struct device_node *np) > +{ > + void __iomem *vbase; > + int ret; > + > + vbase = of_iomap(np, 0); > + if (!vbase) { > + pr_err("Can't ioremap 32k timer base\n"); > + return; > + } > + > + /* > + * 32k sync Counter IP register offsets vary between the > + * highlander version and the legacy ones. > + * The 'SCHEME' bits(30-31) of the revision register is used > + * to identify the version. > + */ Please fix comment length. > + if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) & > + OMAP2_32KSYNCNT_REV_SCHEME) > + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; > + else > + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW; > + > + /* > + * 120000 rough estimate from the calculations in > + * __clocksource_update_freq_scale. > + */ Fix comment length also. > + clocks_calc_mult_shift(&persistent_mult, &persistent_shift, > + 32768, NSEC_PER_SEC, 120000); > + > + ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768, > + 250, 32, clocksource_mmio_readl_up); > + if (ret) { > + pr_err("32k_counter: can't register clocksource\n"); > + return; > + } > + > + sched_clock_register(omap_32k_read_sched_clock, 32, 32768); > + register_persistent_clock(NULL, omap_read_persistent_clock64); I will let John Stultz to have a look at this part because I have doubt regarding the usage of the persistent clock. -- Daniel
On Tue, Sep 29, 2015 at 1:44 PM, Felipe Balbi <balbi@ti.com> wrote: > Introduce a new clocksource driver for Texas > Instruments 32.768 Hz device which is available > on most OMAP-like devices. > > Signed-off-by: Felipe Balbi <balbi@ti.com> > --- > drivers/clocksource/Kconfig | 8 +++ > drivers/clocksource/Makefile | 1 + > drivers/clocksource/timer-ti-32k.c | 121 +++++++++++++++++++++++++++++++++++++ Also isn't this somewhat duplicate of the code in arch/arm/plat-omap/counter_32k.c ? Was this really a rewrite or just a code migration? Should you preserve the copyrights from counter_32k.c? thanks -john -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Oct 01, 2015 at 03:20:18PM -0700, John Stultz wrote: > On Tue, Sep 29, 2015 at 1:44 PM, Felipe Balbi <balbi@ti.com> wrote: > > Introduce a new clocksource driver for Texas > > Instruments 32.768 Hz device which is available > > on most OMAP-like devices. > > > > Signed-off-by: Felipe Balbi <balbi@ti.com> > > --- > > drivers/clocksource/Kconfig | 8 +++ > > drivers/clocksource/Makefile | 1 + > > drivers/clocksource/timer-ti-32k.c | 121 +++++++++++++++++++++++++++++++++++++ > > Also isn't this somewhat duplicate of the code in > arch/arm/plat-omap/counter_32k.c ? > > Was this really a rewrite or just a code migration? Should you migrating, but we can't really delete that yet because we still have a bunch of legacy platforms not using DT. > preserve the copyrights from counter_32k.c? heh, probably :-)
* Daniel Lezcano <daniel.lezcano@linaro.org> [151001 15:04]: > >+ clocks_calc_mult_shift(&persistent_mult, &persistent_shift, > >+ 32768, NSEC_PER_SEC, 120000); > >+ > >+ ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768, > >+ 250, 32, clocksource_mmio_readl_up); > >+ if (ret) { > >+ pr_err("32k_counter: can't register clocksource\n"); > >+ return; > >+ } > >+ > >+ sched_clock_register(omap_32k_read_sched_clock, 32, 32768); > >+ register_persistent_clock(NULL, omap_read_persistent_clock64); > > I will let John Stultz to have a look at this part because I have doubt > regarding the usage of the persistent clock. The persistent clock we want to keep for deeper idle states.. Especially when we start changing clocksource for the duration of deeper idle states. I'll post some updated patches on that when I get a chance. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Tony Lindgren <tony@atomide.com> [151005 03:56]: > * Daniel Lezcano <daniel.lezcano@linaro.org> [151001 15:04]: > > >+ clocks_calc_mult_shift(&persistent_mult, &persistent_shift, > > >+ 32768, NSEC_PER_SEC, 120000); > > >+ > > >+ ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768, > > >+ 250, 32, clocksource_mmio_readl_up); > > >+ if (ret) { > > >+ pr_err("32k_counter: can't register clocksource\n"); > > >+ return; > > >+ } > > >+ > > >+ sched_clock_register(omap_32k_read_sched_clock, 32, 32768); > > >+ register_persistent_clock(NULL, omap_read_persistent_clock64); > > > > I will let John Stultz to have a look at this part because I have doubt > > regarding the usage of the persistent clock. > > The persistent clock we want to keep for deeper idle states.. > Especially when we start changing clocksource for the duration of > deeper idle states. I'll post some updated patches on that when I > get a chance. But sounds like we can just have read_persistent_clock() check for the CLOCK_SOURCE_SUSPEND_NONSTOP like I pointed in the other patch in this series. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index a7726db13abb..0ccfd12a00a3 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -115,6 +115,14 @@ config CLKSRC_PISTACHIO bool select CLKSRC_OF +config CLKSRC_TI_32K + bool "Texas Instruments 32.768 Hz Clocksource" + depends on OF && ARCH_OMAP2PLUS + select CLKSRC_OF + help + This option enables support for Texas Instruments 32.768 Hz clocksource + available on many OMAP-like platforms. + config CLKSRC_STM32 bool "Clocksource for STM32 SoCs" if !ARCH_STM32 depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST) diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 5c00863c3e33..749abc3665b3 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o obj-$(CONFIG_MTK_TIMER) += mtk_timer.o obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o +obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o diff --git a/drivers/clocksource/timer-ti-32k.c b/drivers/clocksource/timer-ti-32k.c new file mode 100644 index 000000000000..10ccce2eb645 --- /dev/null +++ b/drivers/clocksource/timer-ti-32k.c @@ -0,0 +1,121 @@ +/** + * timer-ti-32k.c - OMAP2 32k Timer Support + * + * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/irq.h> +#include <linux/sched_clock.h> +#include <linux/clocksource.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <asm/mach/time.h> + +/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */ +#define OMAP2_32KSYNCNT_REV_OFF 0x0 +#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30) +#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10 +#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30 + +/* + * 32KHz clocksource ... always available, on pretty most chips except + * OMAP 730 and 1510. Other timers could be used as clocksources, with + * higher resolution in free-running counter modes (e.g. 12 MHz xtal), + * but systems won't necessarily want to spend resources that way. + */ +static void __iomem *sync32k_cnt_reg; + +/** + * omap_read_persistent_clock64 - Return time from a persistent clock. + * + * Reads the time from a source which isn't disabled during PM, the + * 32k sync timer. Convert the cycles elapsed since last read into + * nsecs and adds to a monotonically increasing timespec64. + */ +static struct timespec64 persistent_ts; +static cycles_t cycles; +static unsigned int persistent_mult, persistent_shift; + +static u64 notrace omap_32k_read_sched_clock(void) +{ + return readl_relaxed(sync32k_cnt_reg); +} + +static void omap_read_persistent_clock64(struct timespec64 *ts) +{ + unsigned long long nsecs; + cycles_t last_cycles; + + last_cycles = cycles; + cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0; + + nsecs = clocksource_cyc2ns(cycles - last_cycles, + persistent_mult, persistent_shift); + + timespec64_add_ns(&persistent_ts, nsecs); + + *ts = persistent_ts; +} + +static void __init ti_32k_timer_init(struct device_node *np) +{ + void __iomem *vbase; + int ret; + + vbase = of_iomap(np, 0); + if (!vbase) { + pr_err("Can't ioremap 32k timer base\n"); + return; + } + + /* + * 32k sync Counter IP register offsets vary between the + * highlander version and the legacy ones. + * The 'SCHEME' bits(30-31) of the revision register is used + * to identify the version. + */ + if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) & + OMAP2_32KSYNCNT_REV_SCHEME) + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH; + else + sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW; + + /* + * 120000 rough estimate from the calculations in + * __clocksource_update_freq_scale. + */ + clocks_calc_mult_shift(&persistent_mult, &persistent_shift, + 32768, NSEC_PER_SEC, 120000); + + ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768, + 250, 32, clocksource_mmio_readl_up); + if (ret) { + pr_err("32k_counter: can't register clocksource\n"); + return; + } + + sched_clock_register(omap_32k_read_sched_clock, 32, 32768); + register_persistent_clock(NULL, omap_read_persistent_clock64); + pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n"); +} +CLOCKSOURCE_OF_DECLARE(ti_32k_timer, "ti,omap-counter32k", + ti_32k_timer_init);
Introduce a new clocksource driver for Texas Instruments 32.768 Hz device which is available on most OMAP-like devices. Signed-off-by: Felipe Balbi <balbi@ti.com> --- drivers/clocksource/Kconfig | 8 +++ drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-ti-32k.c | 121 +++++++++++++++++++++++++++++++++++++ 3 files changed, 130 insertions(+) create mode 100644 drivers/clocksource/timer-ti-32k.c