| Message ID | 1444046032-31310-1-git-send-email-ian.campbell@citrix.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, 2015-10-05 at 12:53 +0100, Ian Campbell wrote: Ping? > Commit 9ccd608070b6 "arm64: dts: add device tree for ARM SMM-A53x2 on > LogicTile Express 20MG" added a new dts file to arch/arm64 which > included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a > .dtsi supplied by arch/arm. > > Unfortunately this causes some issues for the split device tree > repository[0], since things get moved around there. In that context > the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts > while the include is at src/arm/vexpress-v2m-rs1.dtsi. > > The sharing of the .dtsi is legitimate since the baseboard is the same > for various vexpress systems whatever processor they use. > > Previously I attempted to resolve this by creating a shared location > for such things but we have been unable to come to a consensus on > where that should be. > > Instead this patch simply replaces the use of ../../ in the dts > /include/ with a symlink in arch/arm64/boot/dts/arm pointing to the > file arch/arm/boot/dts. > > Since the split device tree repo will shortly be required to flatten > symlinks for other reasons this will cause the dtsi file to appear in > both src/arm and src/arm64 in the split repo, which is an improvement > on not building for arm64 now. > > [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-re > basing.git/ > > Signed-off-by: Ian Campbell <ian.campbell@citrix.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Kumar Gala <galak@codeaurora.org> > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Sudeep Holla <sudeep.holla@arm.com> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Will Deacon <will.deacon@arm.com> > Cc: Kristina Martsenko <kristina.martsenko@arm.com> > Cc: Kevin Hilman <khilman@linaro.org> > Cc: Frank Rowand <frank.rowand@sonymobile.com> > Cc: Olof Johansson <olof@lixom.net> > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: arm@kernel.org > Cc: linux-kbuild@vger.kernel.org > --- > For more on flattening symlinks see > http://thread.gmane.org/gmane.linux.kernel.input/45646/focus=45742 > --- > arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +- > arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi | 1 + > 2 files changed, 2 insertions(+), 1 deletion(-) > create mode 120000 arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi > > diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts > b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts > index 5b1d018..bb3c26d 100644 > --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts > +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts > @@ -186,6 +186,6 @@ > <0 0 41 &gic GIC_SPI 41 > IRQ_TYPE_LEVEL_HIGH>, > <0 0 42 &gic GIC_SPI 42 > IRQ_TYPE_LEVEL_HIGH>; > > - /include/ "../../../../arm/boot/dts/vexpress-v2m > -rs1.dtsi" > + /include/ "vexpress-v2m-rs1.dtsi" > }; > }; > diff --git a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi > b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi > new file mode 120000 > index 0000000..68fd0f8 > --- /dev/null > +++ b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi > @@ -0,0 +1 @@ > +../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi > \ No newline at end of file -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Oct 05, 2015 at 12:53:52PM +0100, Ian Campbell wrote: > Commit 9ccd608070b6 "arm64: dts: add device tree for ARM SMM-A53x2 on > LogicTile Express 20MG" added a new dts file to arch/arm64 which > included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a > .dtsi supplied by arch/arm. > > Unfortunately this causes some issues for the split device tree > repository[0], since things get moved around there. In that context > the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts > while the include is at src/arm/vexpress-v2m-rs1.dtsi. > > The sharing of the .dtsi is legitimate since the baseboard is the same > for various vexpress systems whatever processor they use. > > Previously I attempted to resolve this by creating a shared location > for such things but we have been unable to come to a consensus on > where that should be. > > Instead this patch simply replaces the use of ../../ in the dts > /include/ with a symlink in arch/arm64/boot/dts/arm pointing to the > file arch/arm/boot/dts. > > Since the split device tree repo will shortly be required to flatten > symlinks for other reasons this will cause the dtsi file to appear in > both src/arm and src/arm64 in the split repo, which is an improvement > on not building for arm64 now. > > [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/ I don't have any objections but these patches usually go in via the arm-soc tree.
On Mon, Oct 05, 2015 at 12:53:52PM +0100, Ian Campbell wrote: > Commit 9ccd608070b6 "arm64: dts: add device tree for ARM SMM-A53x2 on > LogicTile Express 20MG" added a new dts file to arch/arm64 which > included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a > .dtsi supplied by arch/arm. > > Unfortunately this causes some issues for the split device tree > repository[0], since things get moved around there. In that context > the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts > while the include is at src/arm/vexpress-v2m-rs1.dtsi. > > The sharing of the .dtsi is legitimate since the baseboard is the same > for various vexpress systems whatever processor they use. > > Previously I attempted to resolve this by creating a shared location > for such things but we have been unable to come to a consensus on > where that should be. > > Instead this patch simply replaces the use of ../../ in the dts > /include/ with a symlink in arch/arm64/boot/dts/arm pointing to the > file arch/arm/boot/dts. > > Since the split device tree repo will shortly be required to flatten > symlinks for other reasons this will cause the dtsi file to appear in > both src/arm and src/arm64 in the split repo, which is an improvement > on not building for arm64 now. > > [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/ > > Signed-off-by: Ian Campbell <ian.campbell@citrix.com> > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Pawel Moll <pawel.moll@arm.com> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Kumar Gala <galak@codeaurora.org> > Cc: Liviu Dudau <liviu.dudau@arm.com> > Cc: Sudeep Holla <sudeep.holla@arm.com> > Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Russell King <linux@arm.linux.org.uk> > Cc: Catalin Marinas <catalin.marinas@arm.com> > Cc: Will Deacon <will.deacon@arm.com> > Cc: Kristina Martsenko <kristina.martsenko@arm.com> > Cc: Kevin Hilman <khilman@linaro.org> > Cc: Frank Rowand <frank.rowand@sonymobile.com> > Cc: Olof Johansson <olof@lixom.net> > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: arm@kernel.org > Cc: linux-kbuild@vger.kernel.org > --- > For more on flattening symlinks see > http://thread.gmane.org/gmane.linux.kernel.input/45646/focus=45742 > --- > arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +- > arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi | 1 + > 2 files changed, 2 insertions(+), 1 deletion(-) > create mode 120000 arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi > > diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts > index 5b1d018..bb3c26d 100644 > --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts > +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts > @@ -186,6 +186,6 @@ > <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, > <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > > - /include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi" > + /include/ "vexpress-v2m-rs1.dtsi" > }; > }; > diff --git a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi > new file mode 120000 > index 0000000..68fd0f8 > --- /dev/null > +++ b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi > @@ -0,0 +1 @@ > +../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi > \ No newline at end of file I was under the impression that there was some reason symlinks of this fashion were discouraged, but I don't know the details, and I don't have strong feelings either way. This solves a problem, and we don't seem to have a better solution. So to that end: Acked-by: Mark Rutland <mark.rutland@arm.com> Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hello Ian, Rob, Olof, 2015-10-13 0:37 GMT+09:00 Mark Rutland <mark.rutland@arm.com>: > On Mon, Oct 05, 2015 at 12:53:52PM +0100, Ian Campbell wrote: >> Commit 9ccd608070b6 "arm64: dts: add device tree for ARM SMM-A53x2 on >> LogicTile Express 20MG" added a new dts file to arch/arm64 which >> included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a >> .dtsi supplied by arch/arm. >> >> Unfortunately this causes some issues for the split device tree >> repository[0], since things get moved around there. In that context >> the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts >> while the include is at src/arm/vexpress-v2m-rs1.dtsi. >> >> The sharing of the .dtsi is legitimate since the baseboard is the same >> for various vexpress systems whatever processor they use. >> >> Previously I attempted to resolve this by creating a shared location >> for such things but we have been unable to come to a consensus on >> where that should be. >> >> Instead this patch simply replaces the use of ../../ in the dts >> /include/ with a symlink in arch/arm64/boot/dts/arm pointing to the >> file arch/arm/boot/dts. >> >> Since the split device tree repo will shortly be required to flatten >> symlinks for other reasons this will cause the dtsi file to appear in >> both src/arm and src/arm64 in the split repo, which is an improvement >> on not building for arm64 now. >> >> [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/ >> >> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> >> Cc: Rob Herring <robh+dt@kernel.org> >> Cc: Pawel Moll <pawel.moll@arm.com> >> Cc: Mark Rutland <mark.rutland@arm.com> >> Cc: Kumar Gala <galak@codeaurora.org> >> Cc: Liviu Dudau <liviu.dudau@arm.com> >> Cc: Sudeep Holla <sudeep.holla@arm.com> >> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> >> Cc: Russell King <linux@arm.linux.org.uk> >> Cc: Catalin Marinas <catalin.marinas@arm.com> >> Cc: Will Deacon <will.deacon@arm.com> >> Cc: Kristina Martsenko <kristina.martsenko@arm.com> >> Cc: Kevin Hilman <khilman@linaro.org> >> Cc: Frank Rowand <frank.rowand@sonymobile.com> >> Cc: Olof Johansson <olof@lixom.net> >> Cc: devicetree@vger.kernel.org >> Cc: linux-kernel@vger.kernel.org >> Cc: linux-arm-kernel@lists.infradead.org >> Cc: arm@kernel.org >> Cc: linux-kbuild@vger.kernel.org I have a similar issue to vexpress, so I want to consult experts. I am trying to support a new ARM64 SoC and want to share some DTSI files between arch/arm/boot/dts and arch/arm64/boot/dts. I think Ian's "dtb: Create a common home for cross-architecture dtsi files" is under way (or rejected?). I can live with the symbolic link. Is it OK (at least for now)?
On Monday 12 October 2015 16:37:50 Mark Rutland wrote: > On Mon, Oct 05, 2015 at 12:53:52PM +0100, Ian Campbell wrote: > > Commit 9ccd608070b6 "arm64: dts: add device tree for ARM SMM-A53x2 on > > LogicTile Express 20MG" added a new dts file to arch/arm64 which > > included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a > > .dtsi supplied by arch/arm. > > > > Unfortunately this causes some issues for the split device tree > > repository[0], since things get moved around there. In that context > > the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts > > while the include is at src/arm/vexpress-v2m-rs1.dtsi. > > > > The sharing of the .dtsi is legitimate since the baseboard is the same > > for various vexpress systems whatever processor they use. > > > > Previously I attempted to resolve this by creating a shared location > > for such things but we have been unable to come to a consensus on > > where that should be. > > > > Instead this patch simply replaces the use of ../../ in the dts > > /include/ with a symlink in arch/arm64/boot/dts/arm pointing to the > > file arch/arm/boot/dts. > > > > Since the split device tree repo will shortly be required to flatten > > symlinks for other reasons this will cause the dtsi file to appear in > > both src/arm and src/arm64 in the split repo, which is an improvement > > on not building for arm64 now. > > > > [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/ > > > > Signed-off-by: Ian Campbell <ian.campbell@citrix.com> > Acked-by: Mark Rutland <mark.rutland@arm.com> > Applied to next/dt, thanks! Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-kbuild" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 5b1d018..bb3c26d 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -186,6 +186,6 @@ <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - /include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi" + /include/ "vexpress-v2m-rs1.dtsi" }; }; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi new file mode 120000 index 0000000..68fd0f8 --- /dev/null +++ b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi
Commit 9ccd608070b6 "arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG" added a new dts file to arch/arm64 which included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a .dtsi supplied by arch/arm. Unfortunately this causes some issues for the split device tree repository[0], since things get moved around there. In that context the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts while the include is at src/arm/vexpress-v2m-rs1.dtsi. The sharing of the .dtsi is legitimate since the baseboard is the same for various vexpress systems whatever processor they use. Previously I attempted to resolve this by creating a shared location for such things but we have been unable to come to a consensus on where that should be. Instead this patch simply replaces the use of ../../ in the dts /include/ with a symlink in arch/arm64/boot/dts/arm pointing to the file arch/arm/boot/dts. Since the split device tree repo will shortly be required to flatten symlinks for other reasons this will cause the dtsi file to appear in both src/arm and src/arm64 in the split repo, which is an improvement on not building for arm64 now. [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/ Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Kristina Martsenko <kristina.martsenko@arm.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Frank Rowand <frank.rowand@sonymobile.com> Cc: Olof Johansson <olof@lixom.net> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: arm@kernel.org Cc: linux-kbuild@vger.kernel.org --- For more on flattening symlinks see http://thread.gmane.org/gmane.linux.kernel.input/45646/focus=45742 --- arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +- arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) create mode 120000 arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi \ No newline at end of file