| Message ID | 1444759464-32299-4-git-send-email-w-kwok2@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 10/13/2015 02:04 PM, WingMan Kwok wrote: > Signed-off-by: WingMan Kwok <w-kwok2@ti.com> > --- > arch/arm/boot/dts/k2e.dtsi | 24 ++++++++++++++++++++++++ > arch/arm/boot/dts/keystone.dtsi | 25 +++++++++++++++++++++++++ > 2 files changed, 49 insertions(+) > > diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi > index 675fb8e..1ba47d8 100644 > --- a/arch/arm/boot/dts/k2e.dtsi > +++ b/arch/arm/boot/dts/k2e.dtsi > @@ -86,6 +86,18 @@ > gpio,syscon-dev = <&devctrl 0x240>; > }; > > + pcie1_phy: pciephy@2326000 { > + #phy-cells = <0>; > + compatible = "ti,keystone-serdes-pcie"; > + reg = <0x02326000 0x4000>; > + reg-names = "reg_serdes"; > + refclk-khz = <100000>; > + link-rate-kbps = <5000000>; > + phy-type = "pcie"; > + max-lanes = <2>; > + status = "disabled"; > + }; > + > pcie1: pcie@21020000 { > compatible = "ti,keystone-pcie","snps,dw-pcie"; > clocks = <&clkpcie1>; > @@ -130,6 +142,18 @@ > <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>, > <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>; > }; > + > + /* PCIE phy */ > + serdeses { > + #address-cells = <1>; > + #size-cells = <0>; > + serdes@0 { > + reg = <0>; > + phys = <&pcie1_phy>; > + status = "disabled"; > + }; > + }; > + > }; > > mdio: mdio@24200f00 { > diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi > index 72816d6..5312319 100644 > --- a/arch/arm/boot/dts/keystone.dtsi > +++ b/arch/arm/boot/dts/keystone.dtsi > @@ -275,6 +275,19 @@ > ti,syscon-dev = <&devctrl 0x2a0>; > }; > > + pcie0_phy: pciephy@2320000 { > + #phy-cells = <0>; > + compatible = "ti,keystone-serdes-pcie"; > + reg = <0x02320000 0x4000>; > + reg-names = "reg_serdes"; > + refclk-khz = <100000>; > + link-rate-kbps = <5000000>; > + init-firmware = "k2_pcie_serdes_init.fw"; > + phy-type = "pcie"; > + max-lanes = <2>; > + status = "disabled"; > + }; > + > pcie0: pcie@21800000 { > compatible = "ti,keystone-pcie", "snps,dw-pcie"; > clocks = <&clkpcie>; > @@ -319,6 +332,18 @@ > <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>, > <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; > }; > + > + /* PCIE phy */ > + serdeses { > + #address-cells = <1>; > + #size-cells = <0>; > + serdes@0 { > + reg = <0>; > + phys = <&pcie0_phy>; > + status = "disabled"; > + }; > + }; > + > }; > }; > }; > Wingman, This should be a separate patch and remove the sane from Driver patch. i.e. send 1/3 ane 2/3 in one series and 3/3 as a separate patch. Thanks Murali
> -----Original Message----- > From: Karicheri, Muralidharan > Sent: Tuesday, October 13, 2015 2:24 PM > To: Kwok, WingMan; robh+dt@kernel.org; pawel.moll@arm.com; > mark.rutland@arm.com; ijc+devicetree@hellion.org.uk; galak@codeaurora.org; > KISHON VIJAY ABRAHAM; Quadros, Roger; bhelgaas@google.com; > ssantosh@kernel.org; linux@arm.linux.org.uk; devicetree@vger.kernel.org; > linux-kernel@vger.kernel.org; linux-pci@vger.kernel.org; linux-arm- > kernel@lists.infradead.org > Subject: Re: [PATCH 3/3] ARM: keystone: dts: add PCI serdes driver bindings > > On 10/13/2015 02:04 PM, WingMan Kwok wrote: > > Signed-off-by: WingMan Kwok <w-kwok2@ti.com> > > --- > > arch/arm/boot/dts/k2e.dtsi | 24 ++++++++++++++++++++++++ > > arch/arm/boot/dts/keystone.dtsi | 25 +++++++++++++++++++++++++ > > 2 files changed, 49 insertions(+) > > > > diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi > > index 675fb8e..1ba47d8 100644 > > --- a/arch/arm/boot/dts/k2e.dtsi > > +++ b/arch/arm/boot/dts/k2e.dtsi > > @@ -86,6 +86,18 @@ > > gpio,syscon-dev = <&devctrl 0x240>; > > }; > > > > + pcie1_phy: pciephy@2326000 { > > + #phy-cells = <0>; > > + compatible = "ti,keystone-serdes-pcie"; > > + reg = <0x02326000 0x4000>; > > + reg-names = "reg_serdes"; > > + refclk-khz = <100000>; > > + link-rate-kbps = <5000000>; > > + phy-type = "pcie"; > > + max-lanes = <2>; > > + status = "disabled"; > > + }; > > + > > pcie1: pcie@21020000 { > > compatible = "ti,keystone-pcie","snps,dw-pcie"; > > clocks = <&clkpcie1>; > > @@ -130,6 +142,18 @@ > > <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>, > > <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>; > > }; > > + > > + /* PCIE phy */ > > + serdeses { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + serdes@0 { > > + reg = <0>; > > + phys = <&pcie1_phy>; > > + status = "disabled"; > > + }; > > + }; > > + > > }; > > > > mdio: mdio@24200f00 { > > diff --git a/arch/arm/boot/dts/keystone.dtsi > b/arch/arm/boot/dts/keystone.dtsi > > index 72816d6..5312319 100644 > > --- a/arch/arm/boot/dts/keystone.dtsi > > +++ b/arch/arm/boot/dts/keystone.dtsi > > @@ -275,6 +275,19 @@ > > ti,syscon-dev = <&devctrl 0x2a0>; > > }; > > > > + pcie0_phy: pciephy@2320000 { > > + #phy-cells = <0>; > > + compatible = "ti,keystone-serdes-pcie"; > > + reg = <0x02320000 0x4000>; > > + reg-names = "reg_serdes"; > > + refclk-khz = <100000>; > > + link-rate-kbps = <5000000>; > > + init-firmware = "k2_pcie_serdes_init.fw"; > > + phy-type = "pcie"; > > + max-lanes = <2>; > > + status = "disabled"; > > + }; > > + > > pcie0: pcie@21800000 { > > compatible = "ti,keystone-pcie", "snps,dw-pcie"; > > clocks = <&clkpcie>; > > @@ -319,6 +332,18 @@ > > <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>, > > <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; > > }; > > + > > + /* PCIE phy */ > > + serdeses { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + serdes@0 { > > + reg = <0>; > > + phys = <&pcie0_phy>; > > + status = "disabled"; > > + }; > > + }; > > + > > }; > > }; > > }; > > > Wingman, > > This should be a separate patch and remove the sane from Driver patch. > i.e. send 1/3 ane 2/3 in one series and 3/3 as a separate patch. > will do. Thanks, wingMan
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 675fb8e..1ba47d8 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -86,6 +86,18 @@ gpio,syscon-dev = <&devctrl 0x240>; }; + pcie1_phy: pciephy@2326000 { + #phy-cells = <0>; + compatible = "ti,keystone-serdes-pcie"; + reg = <0x02326000 0x4000>; + reg-names = "reg_serdes"; + refclk-khz = <100000>; + link-rate-kbps = <5000000>; + phy-type = "pcie"; + max-lanes = <2>; + status = "disabled"; + }; + pcie1: pcie@21020000 { compatible = "ti,keystone-pcie","snps,dw-pcie"; clocks = <&clkpcie1>; @@ -130,6 +142,18 @@ <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>; }; + + /* PCIE phy */ + serdeses { + #address-cells = <1>; + #size-cells = <0>; + serdes@0 { + reg = <0>; + phys = <&pcie1_phy>; + status = "disabled"; + }; + }; + }; mdio: mdio@24200f00 { diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 72816d6..5312319 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -275,6 +275,19 @@ ti,syscon-dev = <&devctrl 0x2a0>; }; + pcie0_phy: pciephy@2320000 { + #phy-cells = <0>; + compatible = "ti,keystone-serdes-pcie"; + reg = <0x02320000 0x4000>; + reg-names = "reg_serdes"; + refclk-khz = <100000>; + link-rate-kbps = <5000000>; + init-firmware = "k2_pcie_serdes_init.fw"; + phy-type = "pcie"; + max-lanes = <2>; + status = "disabled"; + }; + pcie0: pcie@21800000 { compatible = "ti,keystone-pcie", "snps,dw-pcie"; clocks = <&clkpcie>; @@ -319,6 +332,18 @@ <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>, <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>; }; + + /* PCIE phy */ + serdeses { + #address-cells = <1>; + #size-cells = <0>; + serdes@0 { + reg = <0>; + phys = <&pcie0_phy>; + status = "disabled"; + }; + }; + }; }; };
Signed-off-by: WingMan Kwok <w-kwok2@ti.com> --- arch/arm/boot/dts/k2e.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/keystone.dtsi | 25 +++++++++++++++++++++++++ 2 files changed, 49 insertions(+)