diff mbox

Add USB hooks into NanoBone DTS file

Message ID 561E5908.8010004@newflow.co.uk (mailing list archive)
State New, archived
Headers show

Commit Message

Mark Jackson Oct. 14, 2015, 1:30 p.m. UTC
Add USB hooks into NanoBone DTS file

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
---
 arch/arm/boot/dts/am335x-nano.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Comments

Tony Lindgren Oct. 14, 2015, 7:23 p.m. UTC | #1
* Mark Jackson <mpfj@newflow.co.uk> [151014 06:35]:
> Add USB hooks into NanoBone DTS file

Hmm looking at things, we really should not set status = "disabled"
for any of the internal devices. Setting "disabled" makes the kernel
completely ignore the device and we're better off from PM point of
view to probe and idle the device. The devices are there for sure, and
typically just the pins are not configured for them.

How about just remove the status = "disabled" from am33xx.dtsi
instead?

Regards,

Tony

> Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
> ---
>  arch/arm/boot/dts/am335x-nano.dts | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
> index 5ed4ca6..b86937a 100644
> --- a/arch/arm/boot/dts/am335x-nano.dts
> +++ b/arch/arm/boot/dts/am335x-nano.dts
> @@ -375,6 +375,23 @@
>  	wp-gpios = <&gpio3 18 0>;
>  };
>  
> +&usb {
> +	status = "okay";
> +};
> +
> +&usb_ctrl_mod {
> +	status = "okay";
> +};
> +
> +&usb0_phy {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +	dr_mode = "host";
> +};
> +
>  #include "tps65217.dtsi"
>  
>  &tps {
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 5ed4ca6..b86937a 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -375,6 +375,23 @@ 
 	wp-gpios = <&gpio3 18 0>;
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
 #include "tps65217.dtsi"
 
 &tps {