| Message ID | 1444729078-26585-4-git-send-email-chaotian.jing@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 13 October 2015 at 11:37, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > Add CMD19/CMD21 support for EMMC/SD/SDIO tuning > Add HS400 mode support > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > --- > drivers/mmc/host/mtk-sd.c | 359 ++++++++++++++++++++++++++++++++++++++++++---- > 1 file changed, 332 insertions(+), 27 deletions(-) > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > index b2e89d3..f12a50a 100644 > --- a/drivers/mmc/host/mtk-sd.c > +++ b/drivers/mmc/host/mtk-sd.c > @@ -26,6 +26,7 @@ > #include <linux/pm.h> > #include <linux/pm_runtime.h> > #include <linux/regulator/consumer.h> > +#include <linux/slab.h> > #include <linux/spinlock.h> > > #include <linux/mmc/card.h> > @@ -64,6 +65,7 @@ > #define SDC_RESP2 0x48 > #define SDC_RESP3 0x4c > #define SDC_BLK_NUM 0x50 > +#define EMMC_IOCON 0x7c > #define SDC_ACMD_RESP 0x80 > #define MSDC_DMA_SA 0x90 > #define MSDC_DMA_CTRL 0x98 > @@ -71,6 +73,8 @@ > #define MSDC_PATCH_BIT 0xb0 > #define MSDC_PATCH_BIT1 0xb4 > #define MSDC_PAD_TUNE 0xec > +#define PAD_DS_TUNE 0x188 > +#define EMMC50_CFG0 0x208 > > /*--------------------------------------------------------------------------*/ > /* Register Mask */ > @@ -87,6 +91,7 @@ > #define MSDC_CFG_CKSTB (0x1 << 7) /* R */ > #define MSDC_CFG_CKDIV (0xff << 8) /* RW */ > #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */ > +#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */ > > /* MSDC_IOCON mask */ > #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */ > @@ -204,6 +209,17 @@ > #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ > #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ > > +#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */ > +#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */ > + > +#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */ > +#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */ > +#define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */ > + > +#define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0) /* RW */ > +#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */ > +#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */ > + > #define REQ_CMD_EIO (0x1 << 0) > #define REQ_CMD_TMO (0x1 << 1) > #define REQ_DAT_ERR (0x1 << 2) > @@ -219,6 +235,7 @@ > #define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */ > #define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */ > > +#define DELAY_MAX 32 /* PAD dalay cells */ /s/dalay/delay Can we have some more explaination around this define. Perhaps a more self-explaining name would be enough.- > /*--------------------------------------------------------------------------*/ > /* Descriptor Structure */ > /*--------------------------------------------------------------------------*/ > @@ -265,6 +282,14 @@ struct msdc_save_para { > u32 pad_tune; > u32 patch_bit0; > u32 patch_bit1; > + u32 pad_ds_tune; > + u32 emmc50_cfg0; > +}; > + > +struct msdc_delay_phase { > + u8 maxlen; > + u8 start; > + u8 final_phase; > }; > > struct msdc_host { > @@ -293,12 +318,15 @@ struct msdc_host { > int irq; /* host interrupt */ > > struct clk *src_clk; /* msdc source clock */ > + struct clk *src_clk_parent; /* src_clk's parent */ > + struct clk *hs400_src; /* 400Mhz source clock */ Hmm, so you need to control the upper level clocks. Can you elaborate on why this is needed? > struct clk *h_clk; /* msdc h_clk */ > u32 mclk; /* mmc subsystem clock frequency */ > u32 src_clk_freq; /* source clock frequency */ > u32 sclk; /* SD/MS bus clock frequency */ > - bool ddr; > + unsigned char timing; > bool vqmmc_enabled; > + u32 hs400_ds_delay; > struct msdc_save_para save_para; /* used when gate HCLK */ > }; > > @@ -353,7 +381,10 @@ static void msdc_reset_hw(struct msdc_host *host) > static void msdc_cmd_next(struct msdc_host *host, > struct mmc_request *mrq, struct mmc_command *cmd); > > -static u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | > +static const u32 cmd_ints_mask = MSDC_INTEN_CMDRDY | MSDC_INTEN_RSPCRCERR | > + MSDC_INTEN_CMDTMO | MSDC_INTEN_ACMDRDY | > + MSDC_INTEN_ACMDCRCERR | MSDC_INTEN_ACMDTMO; This belongs to separate code improvement patch. > +static const u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | > MSDC_INTEN_DATCRCERR | MSDC_INTEN_DMA_BDCSERR | > MSDC_INTEN_DMA_GPDCSERR | MSDC_INTEN_DMA_PROTECT; > > @@ -485,7 +516,7 @@ static void msdc_ungate_clock(struct msdc_host *host) > cpu_relax(); > } > > -static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > +static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz) Perhaps this change could be split into two changes. One that breaks out code from ->set_ios() and let msdc_set_mclk() also deals with DDR timings. Second you add the HS400 specific parts. > { > u32 mode; > u32 flags; > @@ -501,8 +532,15 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > flags = readl(host->base + MSDC_INTEN); > sdr_clr_bits(host->base + MSDC_INTEN, flags); > - if (ddr) { /* may need to modify later */ > - mode = 0x2; /* ddr mode and use divisor */ > + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); > + if (timing == MMC_TIMING_UHS_DDR50 || > + timing == MMC_TIMING_MMC_DDR52 || So, no support for HS200? > + timing == MMC_TIMING_MMC_HS400) { > + if (timing == MMC_TIMING_MMC_HS400) > + mode = 0x3; > + else > + mode = 0x2; /* ddr mode and use divisor */ > + > if (hz >= (host->src_clk_freq >> 2)) { > div = 0; /* mean div = 1/4 */ > sclk = host->src_clk_freq >> 2; /* sclk = clk / 4 */ > @@ -511,6 +549,13 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > sclk = (host->src_clk_freq >> 2) / div; > div = (div >> 1); > } > + > + if (timing == MMC_TIMING_MMC_HS400 && > + hz >= (host->src_clk_freq >> 1)) { > + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); > + sclk = host->src_clk_freq >> 1; > + div = 0; /* div is ignore when bit18 is set */ > + } > } else if (hz >= host->src_clk_freq) { > mode = 0x1; /* no divisor */ > div = 0; > @@ -532,12 +577,12 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > cpu_relax(); > host->sclk = sclk; > host->mclk = hz; > - host->ddr = ddr; > + host->timing = timing; > /* need because clk changed. */ > msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); > sdr_set_bits(host->base + MSDC_INTEN, flags); > > - dev_dbg(host->dev, "sclk: %d, ddr: %d\n", host->sclk, ddr); > + dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing); > } > > static inline u32 msdc_cmd_find_resp(struct msdc_host *host, > @@ -725,10 +770,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events, > if (done) > return true; > > - sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY | > - MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO | > - MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR | > - MSDC_INTEN_ACMDTMO); > + sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask); This belongs to separate code improvement patch. > > if (cmd->flags & MMC_RSP_PRESENT) { > if (cmd->flags & MMC_RSP_136) { > @@ -818,10 +860,7 @@ static void msdc_start_command(struct msdc_host *host, > rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd); > mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT); > > - sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY | > - MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO | > - MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR | > - MSDC_INTEN_ACMDTMO); > + sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask); This belongs to separate code improvement patch. > writel(cmd->arg, host->base + SDC_ARG); > writel(rawcmd, host->base + SDC_CMD); > } > @@ -895,7 +934,7 @@ static void msdc_data_xfer_next(struct msdc_host *host, > struct mmc_request *mrq, struct mmc_data *data) > { > if (mmc_op_multi(mrq->cmd->opcode) && mrq->stop && !mrq->stop->error && > - (!data->bytes_xfered || !mrq->sbc)) > + !mrq->sbc) > msdc_start_command(host, mrq, mrq->stop); > else > msdc_request_done(host, mrq); > @@ -929,7 +968,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, > while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS) > cpu_relax(); > sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask); > - dev_dbg(host->dev, "DMA stop\n"); > + dev_dbg(host->dev, "DMA stop event:0x%x\n", events); Perhaps a separate debug patch? > > if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) { > data->bytes_xfered = data->blocks * data->blksz; > @@ -941,6 +980,8 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, > > if (events & MSDC_INT_DATTMO) > data->error = -ETIMEDOUT; > + else if (events & MSDC_INT_DATCRCERR) > + data->error = -EILSEQ; > > dev_err(host->dev, "%s: cmd=%d; blocks=%d", > __func__, mrq->cmd->opcode, data->blocks); > @@ -1112,10 +1153,14 @@ static void msdc_init_hw(struct msdc_host *host) > > writel(0, host->base + MSDC_PAD_TUNE); > writel(0, host->base + MSDC_IOCON); > - sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 1); > - writel(0x403c004f, host->base + MSDC_PATCH_BIT); > + sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0); > + writel(0x403c0046, host->base + MSDC_PATCH_BIT); > sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1); > writel(0xffff0089, host->base + MSDC_PATCH_BIT1); > + sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); > + > + if (host->mmc->caps2 & MMC_CAP2_HS400_1_8V) Should you really do this even if the HS400 mode isn't supported by the card, and thus we will never switch timing to that mode? So, I am kind of wondering if this shouldn't be conditional depending on the current selected timing mode. Or perhaps you need this done from a ->prepare_hs400_tuning() callback)? > + writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE); > /* Configure to enable SDIO mode. > * it's must otherwise sdio cmd5 failed > */ > @@ -1151,7 +1196,6 @@ static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma) > > gpd->gpd_info = GPDMA_DESC_BDP; /* hwo, cs, bd pointer */ > gpd->ptr = (u32)dma->bd_addr; /* physical address */ > - White space. > memset(bd, 0, sizeof(struct mt_bdma_desc) * MAX_BD_NUM); > for (i = 0; i < (MAX_BD_NUM - 1); i++) > bd[i].next = (u32)dma->bd_addr + sizeof(*bd) * (i + 1); > @@ -1161,20 +1205,16 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > { > struct msdc_host *host = mmc_priv(mmc); > int ret; > - u32 ddr = 0; > > pm_runtime_get_sync(host->dev); > > - if (ios->timing == MMC_TIMING_UHS_DDR50 || > - ios->timing == MMC_TIMING_MMC_DDR52) > - ddr = 1; > - > msdc_set_buswidth(host, ios->bus_width); > > /* Suspend/Resume will do power off/on */ > switch (ios->power_mode) { > case MMC_POWER_UP: > if (!IS_ERR(mmc->supply.vmmc)) { > + msdc_init_hw(host); > ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, > ios->vdd); > if (ret) { > @@ -1205,14 +1245,259 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > break; > } > > - if (host->mclk != ios->clock || host->ddr != ddr) > - msdc_set_mclk(host, ddr, ios->clock); > + if (host->mclk != ios->clock || host->timing != ios->timing) > + msdc_set_mclk(host, ios->timing, ios->clock); > > end: > pm_runtime_mark_last_busy(host->dev); > pm_runtime_put_autosuspend(host->dev); > } > > +static u32 test_delay_bit(u32 delay, u32 bit) > +{ > + bit %= DELAY_MAX; > + return delay & (1 << bit); > +} > + > +static int get_delay_len(u32 delay, u32 start_bit) > +{ > + int i; > + > + for (i = 0; i < (DELAY_MAX - start_bit); i++) { > + if (test_delay_bit(delay, start_bit + i) == 0) > + return i; > + } > + return DELAY_MAX - start_bit; > +} > + > +static struct msdc_delay_phase get_best_delay(u32 delay) > +{ > + int start = 0, len = 0; > + int start_final = 0, len_final = 0; > + u8 final_phase = 0xff; > + struct msdc_delay_phase delay_phase; > + > + if (delay == 0) { > + pr_err("phase error: [map:%x]\n", delay); Please use dev_err|warn|dbg|info instead. > + delay_phase.final_phase = final_phase; > + return delay_phase; > + } > + > + while (start < DELAY_MAX) { > + len = get_delay_len(delay, start); > + if (len_final < len) { > + start_final = start; > + len_final = len; > + } > + start += len ? len : 1; > + if (len >= 8 && start_final < 4) > + break; > + } > + > + /* The rule is that to find the smallest delay cell */ > + if (start_final == 0) > + final_phase = (start_final + len_final / 3) % DELAY_MAX; > + else > + final_phase = (start_final + len_final / 2) % DELAY_MAX; > + pr_info("phase: [map:%x] [maxlen:%d] [final:%d]\n", > + delay, len_final, final_phase); Same comment as above. > + > + delay_phase.maxlen = len_final; > + delay_phase.start = start_final; > + delay_phase.final_phase = final_phase; > + return delay_phase; > +} > + > +static int msdc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error) I think you can remove this function and use mmc_send_tuning() instead. > +{ > + struct mmc_request mrq = {NULL}; > + struct mmc_command cmd = {0}; > + struct mmc_data data = {0}; > + struct scatterlist sg; > + struct mmc_ios *ios = &host->ios; > + int size, err = 0; > + u8 *data_buf; > + > + if (ios->bus_width == MMC_BUS_WIDTH_8) > + size = 128; > + else if (ios->bus_width == MMC_BUS_WIDTH_4) > + size = 64; > + else > + return -EINVAL; > + > + data_buf = kzalloc(size, GFP_KERNEL); > + if (!data_buf) > + return -ENOMEM; > + > + mrq.cmd = &cmd; > + mrq.data = &data; > + > + cmd.opcode = opcode; > + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; > + > + data.blksz = size; > + data.blocks = 1; > + data.flags = MMC_DATA_READ; > + > + /* > + * According to the tuning specs, Tuning process > + * is normally shorter 40 executions of CMD19, > + * and timeout value should be shorter than 150 ms > + */ > + data.timeout_ns = 150 * NSEC_PER_MSEC; > + > + data.sg = &sg; > + data.sg_len = 1; > + sg_init_one(&sg, data_buf, size); > + > + mmc_wait_for_req(host, &mrq); > + > + if (cmd_error) > + *cmd_error = cmd.error; > + > + if (cmd.error) { > + err = cmd.error; > + goto out; > + } > + > + if (data.error) { > + err = data.error; > + goto out; > + } > + > +out: > + kfree(data_buf); > + return err; > +} > + > +static int msdc_tune_response(struct mmc_host *mmc, u32 opcode) > +{ > + struct msdc_host *host = mmc_priv(mmc); > + u32 rise_delay = 0, fall_delay = 0; > + struct msdc_delay_phase final_rise_delay, final_fall_delay; > + u8 final_delay, final_maxlen; > + int cmd_err; > + int i; > + > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); > + for (i = 0 ; i < DELAY_MAX; i++) { > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, i); > + msdc_send_tuning(mmc, opcode, &cmd_err); > + if (!cmd_err) > + rise_delay |= (1 << i); > + } > + > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); > + for (i = 0; i < DELAY_MAX; i++) { > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, i); > + msdc_send_tuning(mmc, opcode, &cmd_err); > + if (!cmd_err) > + fall_delay |= (1 << i); > + } > + > + final_rise_delay = get_best_delay(rise_delay); > + final_fall_delay = get_best_delay(fall_delay); > + > + final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen); > + if (final_maxlen == final_rise_delay.maxlen) { > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, > + final_rise_delay.final_phase); > + final_delay = final_rise_delay.final_phase; > + } else { > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, > + final_fall_delay.final_phase); > + final_delay = final_fall_delay.final_phase; > + } > + > + return final_delay; > +} > + > +static int msdc_tune_data(struct mmc_host *mmc, u32 opcode) > +{ > + struct msdc_host *host = mmc_priv(mmc); > + u32 rise_delay = 0, fall_delay = 0; > + struct msdc_delay_phase final_rise_delay, final_fall_delay; > + u8 final_delay, final_maxlen; > + int i, ret; > + > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); > + for (i = 0 ; i < DELAY_MAX; i++) { > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, i); > + ret = msdc_send_tuning(mmc, opcode, NULL); > + if (!ret) > + rise_delay |= (1 << i); > + } > + > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); > + for (i = 0; i < DELAY_MAX; i++) { > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, i); > + ret = msdc_send_tuning(mmc, opcode, NULL); > + if (!ret) > + fall_delay |= (1 << i); > + } > + > + final_rise_delay = get_best_delay(rise_delay); > + final_fall_delay = get_best_delay(fall_delay); > + > + final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen); > + /* Rising edge is more stable, prefer to use it */ > + if (final_rise_delay.maxlen >= 10) > + final_maxlen = final_rise_delay.maxlen; > + if (final_maxlen == final_rise_delay.maxlen) { > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, > + final_rise_delay.final_phase); > + final_delay = final_rise_delay.final_phase; > + } else { > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, > + final_fall_delay.final_phase); > + final_delay = final_fall_delay.final_phase; > + } > + > + return final_delay; > +} > + > +static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode) > +{ > + struct msdc_host *host = mmc_priv(mmc); > + int ret; > + > + pm_runtime_get_sync(host->dev); > + ret = msdc_tune_response(mmc, opcode); I suggest that msdc_tune_response() return a proper error code instead, this seems a bit odd. > + if (ret == 0xff) { > + dev_err(host->dev, "Tune response fail!\n"); > + ret = -EIO; > + goto out; > + } > + ret = msdc_tune_data(mmc, opcode); Same comment as above. > + if (ret == 0xff) { > + dev_err(host->dev, "Tune data fail!\n"); > + ret = -EIO; > + goto out; > + } > + ret = 0; Following my suggestions will make the above assignment redunant, so you should be able to remove it. > +out: > + pm_runtime_mark_last_busy(host->dev); > + pm_runtime_put_autosuspend(host->dev); > + return ret; > +} > + > +static void msdc_hw_reset(struct mmc_host *mmc) I assume this will reset the card? I also thinks this belongs in a separate patch. > +{ > + struct msdc_host *host = mmc_priv(mmc); > + > + sdr_set_bits(host->base + EMMC_IOCON, 1); > + udelay(10); /* 10us is enough */ > + sdr_clr_bits(host->base + EMMC_IOCON, 1); > +} > + > static struct mmc_host_ops mt_msdc_ops = { > .post_req = msdc_post_req, > .pre_req = msdc_pre_req, > @@ -1220,6 +1505,8 @@ static struct mmc_host_ops mt_msdc_ops = { > .set_ios = msdc_ops_set_ios, > .start_signal_voltage_switch = msdc_ops_switch_volt, > .card_busy = msdc_card_busy, > + .execute_tuning = msdc_execute_tuning, > + .hw_reset = msdc_hw_reset, Same comment as above. > }; > > static int msdc_drv_probe(struct platform_device *pdev) > @@ -1260,6 +1547,16 @@ static int msdc_drv_probe(struct platform_device *pdev) > goto host_free; > } > > + host->src_clk_parent = clk_get_parent(host->src_clk); Don't you need to check the return value here? > + host->hs400_src = devm_clk_get(&pdev->dev, "400mhz"); That's a really weird conid for a clock. If it's not too late to change, please do that! > + if (IS_ERR(host->hs400_src)) { > + dev_dbg(&pdev->dev, "Cannot find 400mhz at dts!\n"); > + } else if (clk_set_parent(host->src_clk_parent, host->hs400_src) < 0) { > + dev_err(host->dev, "Failed to set 400mhz source clock!\n"); > + ret = -EINVAL; I think it seems more apropriate to use the return value from clk_set_parent() instead of inventing your own return value. > + goto host_free; > + } It seems like you don't need to store the src_clk_parent and the hs400_src in the host struct, as you are only using it during ->probe(). > + > host->h_clk = devm_clk_get(&pdev->dev, "hclk"); > if (IS_ERR(host->h_clk)) { > ret = PTR_ERR(host->h_clk); > @@ -1293,6 +1590,10 @@ static int msdc_drv_probe(struct platform_device *pdev) > goto host_free; > } > > + if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay", > + &host->hs400_ds_delay)) > + dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n", host->hs400_ds_delay); > + > host->dev = &pdev->dev; > host->mmc = mmc; > host->src_clk_freq = clk_get_rate(host->src_clk); > @@ -1403,6 +1704,8 @@ static void msdc_save_reg(struct msdc_host *host) > host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE); > host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT); > host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1); > + host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE); > + host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0); > } > > static void msdc_restore_reg(struct msdc_host *host) > @@ -1413,6 +1716,8 @@ static void msdc_restore_reg(struct msdc_host *host) > writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE); > writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT); > writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1); > + writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE); > + writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0); > } > > static int msdc_runtime_suspend(struct device *dev) > -- > 1.8.1.1.dirty > Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, 2015-10-14 at 12:05 +0200, Ulf Hansson wrote: > On 13 October 2015 at 11:37, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > Add CMD19/CMD21 support for EMMC/SD/SDIO tuning > > Add HS400 mode support > > > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > --- > > drivers/mmc/host/mtk-sd.c | 359 ++++++++++++++++++++++++++++++++++++++++++---- > > 1 file changed, 332 insertions(+), 27 deletions(-) > > > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > > index b2e89d3..f12a50a 100644 > > --- a/drivers/mmc/host/mtk-sd.c > > +++ b/drivers/mmc/host/mtk-sd.c > > @@ -26,6 +26,7 @@ > > #include <linux/pm.h> > > #include <linux/pm_runtime.h> > > #include <linux/regulator/consumer.h> > > +#include <linux/slab.h> > > #include <linux/spinlock.h> > > > > #include <linux/mmc/card.h> > > @@ -64,6 +65,7 @@ > > #define SDC_RESP2 0x48 > > #define SDC_RESP3 0x4c > > #define SDC_BLK_NUM 0x50 > > +#define EMMC_IOCON 0x7c > > #define SDC_ACMD_RESP 0x80 > > #define MSDC_DMA_SA 0x90 > > #define MSDC_DMA_CTRL 0x98 > > @@ -71,6 +73,8 @@ > > #define MSDC_PATCH_BIT 0xb0 > > #define MSDC_PATCH_BIT1 0xb4 > > #define MSDC_PAD_TUNE 0xec > > +#define PAD_DS_TUNE 0x188 > > +#define EMMC50_CFG0 0x208 > > > > /*--------------------------------------------------------------------------*/ > > /* Register Mask */ > > @@ -87,6 +91,7 @@ > > #define MSDC_CFG_CKSTB (0x1 << 7) /* R */ > > #define MSDC_CFG_CKDIV (0xff << 8) /* RW */ > > #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */ > > +#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */ > > > > /* MSDC_IOCON mask */ > > #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */ > > @@ -204,6 +209,17 @@ > > #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ > > #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ > > > > +#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */ > > +#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */ > > + > > +#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */ > > +#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */ > > +#define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */ > > + > > +#define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0) /* RW */ > > +#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */ > > +#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */ > > + > > #define REQ_CMD_EIO (0x1 << 0) > > #define REQ_CMD_TMO (0x1 << 1) > > #define REQ_DAT_ERR (0x1 << 2) > > @@ -219,6 +235,7 @@ > > #define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */ > > #define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */ > > > > +#define DELAY_MAX 32 /* PAD dalay cells */ > > /s/dalay/delay > > Can we have some more explaination around this define. Perhaps a more > self-explaining name would be enough.- This is the max step of the pad delay cells, our hardware use 5bits to describe the pad delay. will change it to #define PAD_DELAY_MAX 32 > > /*--------------------------------------------------------------------------*/ > > /* Descriptor Structure */ > > /*--------------------------------------------------------------------------*/ > > @@ -265,6 +282,14 @@ struct msdc_save_para { > > u32 pad_tune; > > u32 patch_bit0; > > u32 patch_bit1; > > + u32 pad_ds_tune; > > + u32 emmc50_cfg0; > > +}; > > + > > +struct msdc_delay_phase { > > + u8 maxlen; > > + u8 start; > > + u8 final_phase; > > }; > > > > struct msdc_host { > > @@ -293,12 +318,15 @@ struct msdc_host { > > int irq; /* host interrupt */ > > > > struct clk *src_clk; /* msdc source clock */ > > + struct clk *src_clk_parent; /* src_clk's parent */ > > + struct clk *hs400_src; /* 400Mhz source clock */ > > Hmm, so you need to control the upper level clocks. Can you elaborate > on why this is needed? > hs400 is DDR200, in our host design, if the mode is DDR(HS400), if want to get 200Mhz mmc bus clock frequency, the minimum source clock is double of the mmc bus clock, So, we need it for HS400 mode with 200Mhz bus clock. > > struct clk *h_clk; /* msdc h_clk */ > > u32 mclk; /* mmc subsystem clock frequency */ > > u32 src_clk_freq; /* source clock frequency */ > > u32 sclk; /* SD/MS bus clock frequency */ > > - bool ddr; > > + unsigned char timing; > > bool vqmmc_enabled; > > + u32 hs400_ds_delay; > > struct msdc_save_para save_para; /* used when gate HCLK */ > > }; > > > > @@ -353,7 +381,10 @@ static void msdc_reset_hw(struct msdc_host *host) > > static void msdc_cmd_next(struct msdc_host *host, > > struct mmc_request *mrq, struct mmc_command *cmd); > > > > -static u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | > > +static const u32 cmd_ints_mask = MSDC_INTEN_CMDRDY | MSDC_INTEN_RSPCRCERR | > > + MSDC_INTEN_CMDTMO | MSDC_INTEN_ACMDRDY | > > + MSDC_INTEN_ACMDCRCERR | MSDC_INTEN_ACMDTMO; > > This belongs to separate code improvement patch. > OK, will separate it. > > +static const u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | > > MSDC_INTEN_DATCRCERR | MSDC_INTEN_DMA_BDCSERR | > > MSDC_INTEN_DMA_GPDCSERR | MSDC_INTEN_DMA_PROTECT; > > > > @@ -485,7 +516,7 @@ static void msdc_ungate_clock(struct msdc_host *host) > > cpu_relax(); > > } > > > > -static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > +static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz) > > Perhaps this change could be split into two changes. > > One that breaks out code from ->set_ios() and let msdc_set_mclk() also > deals with DDR timings. > > Second you add the HS400 specific parts. > OK, will split it. > > { > > u32 mode; > > u32 flags; > > @@ -501,8 +532,15 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > > > flags = readl(host->base + MSDC_INTEN); > > sdr_clr_bits(host->base + MSDC_INTEN, flags); > > - if (ddr) { /* may need to modify later */ > > - mode = 0x2; /* ddr mode and use divisor */ > > + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); > > + if (timing == MMC_TIMING_UHS_DDR50 || > > + timing == MMC_TIMING_MMC_DDR52 || > > So, no support for HS200? > HS200 is the same with other SDR modes, so it will be handled at else.. > > + timing == MMC_TIMING_MMC_HS400) { > > + if (timing == MMC_TIMING_MMC_HS400) > > + mode = 0x3; > > + else > > + mode = 0x2; /* ddr mode and use divisor */ > > + > > if (hz >= (host->src_clk_freq >> 2)) { > > div = 0; /* mean div = 1/4 */ > > sclk = host->src_clk_freq >> 2; /* sclk = clk / 4 */ > > @@ -511,6 +549,13 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > sclk = (host->src_clk_freq >> 2) / div; > > div = (div >> 1); > > } > > + > > + if (timing == MMC_TIMING_MMC_HS400 && > > + hz >= (host->src_clk_freq >> 1)) { > > + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); > > + sclk = host->src_clk_freq >> 1; > > + div = 0; /* div is ignore when bit18 is set */ > > + } > > } else if (hz >= host->src_clk_freq) { > > mode = 0x1; /* no divisor */ > > div = 0; > > @@ -532,12 +577,12 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > cpu_relax(); > > host->sclk = sclk; > > host->mclk = hz; > > - host->ddr = ddr; > > + host->timing = timing; > > /* need because clk changed. */ > > msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); > > sdr_set_bits(host->base + MSDC_INTEN, flags); > > > > - dev_dbg(host->dev, "sclk: %d, ddr: %d\n", host->sclk, ddr); > > + dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing); > > } > > > > static inline u32 msdc_cmd_find_resp(struct msdc_host *host, > > @@ -725,10 +770,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events, > > if (done) > > return true; > > > > - sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY | > > - MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO | > > - MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR | > > - MSDC_INTEN_ACMDTMO); > > + sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask); > > This belongs to separate code improvement patch. > OK, will separate it. > > > > if (cmd->flags & MMC_RSP_PRESENT) { > > if (cmd->flags & MMC_RSP_136) { > > @@ -818,10 +860,7 @@ static void msdc_start_command(struct msdc_host *host, > > rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd); > > mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT); > > > > - sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY | > > - MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO | > > - MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR | > > - MSDC_INTEN_ACMDTMO); > > + sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask); > > This belongs to separate code improvement patch. OK, will separate it. > > > writel(cmd->arg, host->base + SDC_ARG); > > writel(rawcmd, host->base + SDC_CMD); > > } > > @@ -895,7 +934,7 @@ static void msdc_data_xfer_next(struct msdc_host *host, > > struct mmc_request *mrq, struct mmc_data *data) > > { > > if (mmc_op_multi(mrq->cmd->opcode) && mrq->stop && !mrq->stop->error && > > - (!data->bytes_xfered || !mrq->sbc)) > > + !mrq->sbc) > > msdc_start_command(host, mrq, mrq->stop); > > else > > msdc_request_done(host, mrq); > > @@ -929,7 +968,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, > > while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS) > > cpu_relax(); > > sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask); > > - dev_dbg(host->dev, "DMA stop\n"); > > + dev_dbg(host->dev, "DMA stop event:0x%x\n", events); > > Perhaps a separate debug patch? will add it to the improvement patch. > > > > > if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) { > > data->bytes_xfered = data->blocks * data->blksz; > > @@ -941,6 +980,8 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, > > > > if (events & MSDC_INT_DATTMO) > > data->error = -ETIMEDOUT; > > + else if (events & MSDC_INT_DATCRCERR) > > + data->error = -EILSEQ; > > > > dev_err(host->dev, "%s: cmd=%d; blocks=%d", > > __func__, mrq->cmd->opcode, data->blocks); > > @@ -1112,10 +1153,14 @@ static void msdc_init_hw(struct msdc_host *host) > > > > writel(0, host->base + MSDC_PAD_TUNE); > > writel(0, host->base + MSDC_IOCON); > > - sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 1); > > - writel(0x403c004f, host->base + MSDC_PATCH_BIT); > > + sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0); > > + writel(0x403c0046, host->base + MSDC_PATCH_BIT); > > sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1); > > writel(0xffff0089, host->base + MSDC_PATCH_BIT1); > > + sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); > > + > > + if (host->mmc->caps2 & MMC_CAP2_HS400_1_8V) > > Should you really do this even if the HS400 mode isn't supported by > the card, and thus we will never switch timing to that mode? > > So, I am kind of wondering if this shouldn't be conditional depending > on the current selected timing mode. Or perhaps you need this done > from a ->prepare_hs400_tuning() callback)? > Actually, set this register has no impact to the none HS400 mode. anyway, put it to ->prepare_hs400_tuning() is better, will do it at next revision. > > + writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE); > > /* Configure to enable SDIO mode. > > * it's must otherwise sdio cmd5 failed > > */ > > @@ -1151,7 +1196,6 @@ static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma) > > > > gpd->gpd_info = GPDMA_DESC_BDP; /* hwo, cs, bd pointer */ > > gpd->ptr = (u32)dma->bd_addr; /* physical address */ > > - > > White space. > will fix at next revision. > > memset(bd, 0, sizeof(struct mt_bdma_desc) * MAX_BD_NUM); > > for (i = 0; i < (MAX_BD_NUM - 1); i++) > > bd[i].next = (u32)dma->bd_addr + sizeof(*bd) * (i + 1); > > @@ -1161,20 +1205,16 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > { > > struct msdc_host *host = mmc_priv(mmc); > > int ret; > > - u32 ddr = 0; > > > > pm_runtime_get_sync(host->dev); > > > > - if (ios->timing == MMC_TIMING_UHS_DDR50 || > > - ios->timing == MMC_TIMING_MMC_DDR52) > > - ddr = 1; > > - > > msdc_set_buswidth(host, ios->bus_width); > > > > /* Suspend/Resume will do power off/on */ > > switch (ios->power_mode) { > > case MMC_POWER_UP: > > if (!IS_ERR(mmc->supply.vmmc)) { > > + msdc_init_hw(host); > > ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, > > ios->vdd); > > if (ret) { > > @@ -1205,14 +1245,259 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > break; > > } > > > > - if (host->mclk != ios->clock || host->ddr != ddr) > > - msdc_set_mclk(host, ddr, ios->clock); > > + if (host->mclk != ios->clock || host->timing != ios->timing) > > + msdc_set_mclk(host, ios->timing, ios->clock); > > > > end: > > pm_runtime_mark_last_busy(host->dev); > > pm_runtime_put_autosuspend(host->dev); > > } > > > > +static u32 test_delay_bit(u32 delay, u32 bit) > > +{ > > + bit %= DELAY_MAX; > > + return delay & (1 << bit); > > +} > > + > > +static int get_delay_len(u32 delay, u32 start_bit) > > +{ > > + int i; > > + > > + for (i = 0; i < (DELAY_MAX - start_bit); i++) { > > + if (test_delay_bit(delay, start_bit + i) == 0) > > + return i; > > + } > > + return DELAY_MAX - start_bit; > > +} > > + > > +static struct msdc_delay_phase get_best_delay(u32 delay) > > +{ > > + int start = 0, len = 0; > > + int start_final = 0, len_final = 0; > > + u8 final_phase = 0xff; > > + struct msdc_delay_phase delay_phase; > > + > > + if (delay == 0) { > > + pr_err("phase error: [map:%x]\n", delay); > > Please use dev_err|warn|dbg|info instead. > As you know, this function is just only parse the argument "u32 delay", it do not bind with any device. > > + delay_phase.final_phase = final_phase; > > + return delay_phase; > > + } > > + > > + while (start < DELAY_MAX) { > > + len = get_delay_len(delay, start); > > + if (len_final < len) { > > + start_final = start; > > + len_final = len; > > + } > > + start += len ? len : 1; > > + if (len >= 8 && start_final < 4) > > + break; > > + } > > + > > + /* The rule is that to find the smallest delay cell */ > > + if (start_final == 0) > > + final_phase = (start_final + len_final / 3) % DELAY_MAX; > > + else > > + final_phase = (start_final + len_final / 2) % DELAY_MAX; > > + pr_info("phase: [map:%x] [maxlen:%d] [final:%d]\n", > > + delay, len_final, final_phase); > > Same comment as above. > > > + > > + delay_phase.maxlen = len_final; > > + delay_phase.start = start_final; > > + delay_phase.final_phase = final_phase; > > + return delay_phase; > > +} > > + > > +static int msdc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error) > > I think you can remove this function and use mmc_send_tuning() instead. Hmm, I also noticed that there was a mmc_send_tuning, but, I need to get the cmd_error when tune cmd response, in this case, do not care the data error. > > > +{ > > + struct mmc_request mrq = {NULL}; > > + struct mmc_command cmd = {0}; > > + struct mmc_data data = {0}; > > + struct scatterlist sg; > > + struct mmc_ios *ios = &host->ios; > > + int size, err = 0; > > + u8 *data_buf; > > + > > + if (ios->bus_width == MMC_BUS_WIDTH_8) > > + size = 128; > > + else if (ios->bus_width == MMC_BUS_WIDTH_4) > > + size = 64; > > + else > > + return -EINVAL; > > + > > + data_buf = kzalloc(size, GFP_KERNEL); > > + if (!data_buf) > > + return -ENOMEM; > > + > > + mrq.cmd = &cmd; > > + mrq.data = &data; > > + > > + cmd.opcode = opcode; > > + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; > > + > > + data.blksz = size; > > + data.blocks = 1; > > + data.flags = MMC_DATA_READ; > > + > > + /* > > + * According to the tuning specs, Tuning process > > + * is normally shorter 40 executions of CMD19, > > + * and timeout value should be shorter than 150 ms > > + */ > > + data.timeout_ns = 150 * NSEC_PER_MSEC; > > + > > + data.sg = &sg; > > + data.sg_len = 1; > > + sg_init_one(&sg, data_buf, size); > > + > > + mmc_wait_for_req(host, &mrq); > > + > > + if (cmd_error) > > + *cmd_error = cmd.error; > > + > > + if (cmd.error) { > > + err = cmd.error; > > + goto out; > > + } > > + > > + if (data.error) { > > + err = data.error; > > + goto out; > > + } > > + > > +out: > > + kfree(data_buf); > > + return err; > > +} > > + > > +static int msdc_tune_response(struct mmc_host *mmc, u32 opcode) > > +{ > > + struct msdc_host *host = mmc_priv(mmc); > > + u32 rise_delay = 0, fall_delay = 0; > > + struct msdc_delay_phase final_rise_delay, final_fall_delay; > > + u8 final_delay, final_maxlen; > > + int cmd_err; > > + int i; > > + > > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); > > + for (i = 0 ; i < DELAY_MAX; i++) { > > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, i); > > + msdc_send_tuning(mmc, opcode, &cmd_err); > > + if (!cmd_err) > > + rise_delay |= (1 << i); > > + } > > + > > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); > > + for (i = 0; i < DELAY_MAX; i++) { > > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, i); > > + msdc_send_tuning(mmc, opcode, &cmd_err); > > + if (!cmd_err) > > + fall_delay |= (1 << i); > > + } > > + > > + final_rise_delay = get_best_delay(rise_delay); > > + final_fall_delay = get_best_delay(fall_delay); > > + > > + final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen); > > + if (final_maxlen == final_rise_delay.maxlen) { > > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); > > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, > > + final_rise_delay.final_phase); > > + final_delay = final_rise_delay.final_phase; > > + } else { > > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); > > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, > > + final_fall_delay.final_phase); > > + final_delay = final_fall_delay.final_phase; > > + } > > + > > + return final_delay; > > +} > > + > > +static int msdc_tune_data(struct mmc_host *mmc, u32 opcode) > > +{ > > + struct msdc_host *host = mmc_priv(mmc); > > + u32 rise_delay = 0, fall_delay = 0; > > + struct msdc_delay_phase final_rise_delay, final_fall_delay; > > + u8 final_delay, final_maxlen; > > + int i, ret; > > + > > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); > > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); > > + for (i = 0 ; i < DELAY_MAX; i++) { > > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, i); > > + ret = msdc_send_tuning(mmc, opcode, NULL); > > + if (!ret) > > + rise_delay |= (1 << i); > > + } > > + > > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); > > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); > > + for (i = 0; i < DELAY_MAX; i++) { > > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, i); > > + ret = msdc_send_tuning(mmc, opcode, NULL); > > + if (!ret) > > + fall_delay |= (1 << i); > > + } > > + > > + final_rise_delay = get_best_delay(rise_delay); > > + final_fall_delay = get_best_delay(fall_delay); > > + > > + final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen); > > + /* Rising edge is more stable, prefer to use it */ > > + if (final_rise_delay.maxlen >= 10) > > + final_maxlen = final_rise_delay.maxlen; > > + if (final_maxlen == final_rise_delay.maxlen) { > > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); > > + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); > > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, > > + final_rise_delay.final_phase); > > + final_delay = final_rise_delay.final_phase; > > + } else { > > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); > > + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); > > + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, > > + final_fall_delay.final_phase); > > + final_delay = final_fall_delay.final_phase; > > + } > > + > > + return final_delay; > > +} > > + > > +static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode) > > +{ > > + struct msdc_host *host = mmc_priv(mmc); > > + int ret; > > + > > + pm_runtime_get_sync(host->dev); > > + ret = msdc_tune_response(mmc, opcode); > > I suggest that msdc_tune_response() return a proper error code > instead, this seems a bit odd. > OK, will return -EIO directly. > > + if (ret == 0xff) { > > + dev_err(host->dev, "Tune response fail!\n"); > > + ret = -EIO; > > + goto out; > > + } > > + ret = msdc_tune_data(mmc, opcode); > > Same comment as above. > > > + if (ret == 0xff) { > > + dev_err(host->dev, "Tune data fail!\n"); > > + ret = -EIO; > > + goto out; > > + } > > + ret = 0; > > Following my suggestions will make the above assignment redunant, so > you should be able to remove it. OK. > > > +out: > > + pm_runtime_mark_last_busy(host->dev); > > + pm_runtime_put_autosuspend(host->dev); > > + return ret; > > +} > > + > > +static void msdc_hw_reset(struct mmc_host *mmc) > > I assume this will reset the card? > > I also thinks this belongs in a separate patch. > Yes, it will reset the eMMC, will separate it. > > +{ > > + struct msdc_host *host = mmc_priv(mmc); > > + > > + sdr_set_bits(host->base + EMMC_IOCON, 1); > > + udelay(10); /* 10us is enough */ > > + sdr_clr_bits(host->base + EMMC_IOCON, 1); > > +} > > + > > static struct mmc_host_ops mt_msdc_ops = { > > .post_req = msdc_post_req, > > .pre_req = msdc_pre_req, > > @@ -1220,6 +1505,8 @@ static struct mmc_host_ops mt_msdc_ops = { > > .set_ios = msdc_ops_set_ios, > > .start_signal_voltage_switch = msdc_ops_switch_volt, > > .card_busy = msdc_card_busy, > > + .execute_tuning = msdc_execute_tuning, > > + .hw_reset = msdc_hw_reset, > > Same comment as above. Yes. > > > }; > > > > static int msdc_drv_probe(struct platform_device *pdev) > > @@ -1260,6 +1547,16 @@ static int msdc_drv_probe(struct platform_device *pdev) > > goto host_free; > > } > > > > + host->src_clk_parent = clk_get_parent(host->src_clk); > > Don't you need to check the return value here? > will check it. > > + host->hs400_src = devm_clk_get(&pdev->dev, "400mhz"); > > That's a really weird conid for a clock. If it's not too late to > change, please do that! > > > + if (IS_ERR(host->hs400_src)) { > > + dev_dbg(&pdev->dev, "Cannot find 400mhz at dts!\n"); > > + } else if (clk_set_parent(host->src_clk_parent, host->hs400_src) < 0) { > > + dev_err(host->dev, "Failed to set 400mhz source clock!\n"); > > + ret = -EINVAL; > > I think it seems more apropriate to use the return value from > clk_set_parent() instead of inventing your own return value. > OK. > > + goto host_free; > > + } > > It seems like you don't need to store the src_clk_parent and the > hs400_src in the host struct, as you are only using it during > ->probe(). OK,will remove the member src_clk. > > + > > host->h_clk = devm_clk_get(&pdev->dev, "hclk"); > > if (IS_ERR(host->h_clk)) { > > ret = PTR_ERR(host->h_clk); > > @@ -1293,6 +1590,10 @@ static int msdc_drv_probe(struct platform_device *pdev) > > goto host_free; > > } > > > > + if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay", > > + &host->hs400_ds_delay)) > > + dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n", host->hs400_ds_delay); > > + > > host->dev = &pdev->dev; > > host->mmc = mmc; > > host->src_clk_freq = clk_get_rate(host->src_clk); > > @@ -1403,6 +1704,8 @@ static void msdc_save_reg(struct msdc_host *host) > > host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE); > > host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT); > > host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1); > > + host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE); > > + host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0); > > } > > > > static void msdc_restore_reg(struct msdc_host *host) > > @@ -1413,6 +1716,8 @@ static void msdc_restore_reg(struct msdc_host *host) > > writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE); > > writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT); > > writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1); > > + writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE); > > + writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0); > > } > > > > static int msdc_runtime_suspend(struct device *dev) > > -- > > 1.8.1.1.dirty > > > > Kind regards > Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Tue, Oct 13, 2015 at 05:37:57PM +0800, Chaotian Jing wrote: > @@ -1260,6 +1547,16 @@ static int msdc_drv_probe(struct platform_device *pdev) > goto host_free; > } > > + host->src_clk_parent = clk_get_parent(host->src_clk); > + host->hs400_src = devm_clk_get(&pdev->dev, "400mhz"); > + if (IS_ERR(host->hs400_src)) { > + dev_dbg(&pdev->dev, "Cannot find 400mhz at dts!\n"); > + } else if (clk_set_parent(host->src_clk_parent, host->hs400_src) < 0) { > + dev_err(host->dev, "Failed to set 400mhz source clock!\n"); > + ret = -EINVAL; > + goto host_free; > + } This is a static setup. We have device tree bindings for doing this. Please look for assigned-clocks and assigned-clock-parents. Doing stuff like this in the driver almost certainly leads to problems because the next SoC will have different requirements here. Sascha
On Thu, Oct 15, 2015 at 10:46:20AM +0800, Chaotian Jing wrote: > On Wed, 2015-10-14 at 12:05 +0200, Ulf Hansson wrote: > > On 13 October 2015 at 11:37, Chaotian Jing <chaotian.jing@mediatek.com> wrote: > > > Add CMD19/CMD21 support for EMMC/SD/SDIO tuning > > > Add HS400 mode support > > > > > > Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> > > > --- > > > drivers/mmc/host/mtk-sd.c | 359 ++++++++++++++++++++++++++++++++++++++++++---- > > > 1 file changed, 332 insertions(+), 27 deletions(-) > > > > > > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c > > > index b2e89d3..f12a50a 100644 > > > --- a/drivers/mmc/host/mtk-sd.c > > > +++ b/drivers/mmc/host/mtk-sd.c > > > @@ -26,6 +26,7 @@ > > > #include <linux/pm.h> > > > #include <linux/pm_runtime.h> > > > #include <linux/regulator/consumer.h> > > > +#include <linux/slab.h> > > > #include <linux/spinlock.h> > > > > > > #include <linux/mmc/card.h> > > > @@ -64,6 +65,7 @@ > > > #define SDC_RESP2 0x48 > > > #define SDC_RESP3 0x4c > > > #define SDC_BLK_NUM 0x50 > > > +#define EMMC_IOCON 0x7c > > > #define SDC_ACMD_RESP 0x80 > > > #define MSDC_DMA_SA 0x90 > > > #define MSDC_DMA_CTRL 0x98 > > > @@ -71,6 +73,8 @@ > > > #define MSDC_PATCH_BIT 0xb0 > > > #define MSDC_PATCH_BIT1 0xb4 > > > #define MSDC_PAD_TUNE 0xec > > > +#define PAD_DS_TUNE 0x188 > > > +#define EMMC50_CFG0 0x208 > > > > > > /*--------------------------------------------------------------------------*/ > > > /* Register Mask */ > > > @@ -87,6 +91,7 @@ > > > #define MSDC_CFG_CKSTB (0x1 << 7) /* R */ > > > #define MSDC_CFG_CKDIV (0xff << 8) /* RW */ > > > #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */ > > > +#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */ > > > > > > /* MSDC_IOCON mask */ > > > #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */ > > > @@ -204,6 +209,17 @@ > > > #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ > > > #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ > > > > > > +#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */ > > > +#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */ > > > + > > > +#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */ > > > +#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */ > > > +#define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */ > > > + > > > +#define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0) /* RW */ > > > +#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */ > > > +#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */ > > > + > > > #define REQ_CMD_EIO (0x1 << 0) > > > #define REQ_CMD_TMO (0x1 << 1) > > > #define REQ_DAT_ERR (0x1 << 2) > > > @@ -219,6 +235,7 @@ > > > #define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */ > > > #define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */ > > > > > > +#define DELAY_MAX 32 /* PAD dalay cells */ > > > > /s/dalay/delay > > > > Can we have some more explaination around this define. Perhaps a more > > self-explaining name would be enough.- > > This is the max step of the pad delay cells, our hardware use 5bits to > describe the pad delay. > will change it to > #define PAD_DELAY_MAX 32 > > > /*--------------------------------------------------------------------------*/ > > > /* Descriptor Structure */ > > > /*--------------------------------------------------------------------------*/ > > > @@ -265,6 +282,14 @@ struct msdc_save_para { > > > u32 pad_tune; > > > u32 patch_bit0; > > > u32 patch_bit1; > > > + u32 pad_ds_tune; > > > + u32 emmc50_cfg0; > > > +}; > > > + > > > +struct msdc_delay_phase { > > > + u8 maxlen; > > > + u8 start; > > > + u8 final_phase; > > > }; > > > > > > struct msdc_host { > > > @@ -293,12 +318,15 @@ struct msdc_host { > > > int irq; /* host interrupt */ > > > > > > struct clk *src_clk; /* msdc source clock */ > > > + struct clk *src_clk_parent; /* src_clk's parent */ > > > + struct clk *hs400_src; /* 400Mhz source clock */ > > > > Hmm, so you need to control the upper level clocks. Can you elaborate > > on why this is needed? > > > hs400 is DDR200, in our host design, if the mode is DDR(HS400), if want > to get 200Mhz mmc bus clock frequency, the minimum source clock is > double of the mmc bus clock, So, we need it for HS400 mode with 200Mhz > bus clock. > > > struct clk *h_clk; /* msdc h_clk */ > > > u32 mclk; /* mmc subsystem clock frequency */ > > > u32 src_clk_freq; /* source clock frequency */ > > > u32 sclk; /* SD/MS bus clock frequency */ > > > - bool ddr; > > > + unsigned char timing; > > > bool vqmmc_enabled; > > > + u32 hs400_ds_delay; > > > struct msdc_save_para save_para; /* used when gate HCLK */ > > > }; > > > > > > @@ -353,7 +381,10 @@ static void msdc_reset_hw(struct msdc_host *host) > > > static void msdc_cmd_next(struct msdc_host *host, > > > struct mmc_request *mrq, struct mmc_command *cmd); > > > > > > -static u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | > > > +static const u32 cmd_ints_mask = MSDC_INTEN_CMDRDY | MSDC_INTEN_RSPCRCERR | > > > + MSDC_INTEN_CMDTMO | MSDC_INTEN_ACMDRDY | > > > + MSDC_INTEN_ACMDCRCERR | MSDC_INTEN_ACMDTMO; > > > > This belongs to separate code improvement patch. > > > OK, will separate it. > > > +static const u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | > > > MSDC_INTEN_DATCRCERR | MSDC_INTEN_DMA_BDCSERR | > > > MSDC_INTEN_DMA_GPDCSERR | MSDC_INTEN_DMA_PROTECT; > > > > > > @@ -485,7 +516,7 @@ static void msdc_ungate_clock(struct msdc_host *host) > > > cpu_relax(); > > > } > > > > > > -static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > > +static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz) > > > > Perhaps this change could be split into two changes. > > > > One that breaks out code from ->set_ios() and let msdc_set_mclk() also > > deals with DDR timings. > > > > Second you add the HS400 specific parts. > > > OK, will split it. > > > { > > > u32 mode; > > > u32 flags; > > > @@ -501,8 +532,15 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > > > > > flags = readl(host->base + MSDC_INTEN); > > > sdr_clr_bits(host->base + MSDC_INTEN, flags); > > > - if (ddr) { /* may need to modify later */ > > > - mode = 0x2; /* ddr mode and use divisor */ > > > + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); > > > + if (timing == MMC_TIMING_UHS_DDR50 || > > > + timing == MMC_TIMING_MMC_DDR52 || > > > > So, no support for HS200? > > > HS200 is the same with other SDR modes, so it will be handled at else.. > > > + timing == MMC_TIMING_MMC_HS400) { > > > + if (timing == MMC_TIMING_MMC_HS400) > > > + mode = 0x3; > > > + else > > > + mode = 0x2; /* ddr mode and use divisor */ > > > + > > > if (hz >= (host->src_clk_freq >> 2)) { > > > div = 0; /* mean div = 1/4 */ > > > sclk = host->src_clk_freq >> 2; /* sclk = clk / 4 */ > > > @@ -511,6 +549,13 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > > sclk = (host->src_clk_freq >> 2) / div; > > > div = (div >> 1); > > > } > > > + > > > + if (timing == MMC_TIMING_MMC_HS400 && > > > + hz >= (host->src_clk_freq >> 1)) { > > > + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); > > > + sclk = host->src_clk_freq >> 1; > > > + div = 0; /* div is ignore when bit18 is set */ > > > + } > > > } else if (hz >= host->src_clk_freq) { > > > mode = 0x1; /* no divisor */ > > > div = 0; > > > @@ -532,12 +577,12 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) > > > cpu_relax(); > > > host->sclk = sclk; > > > host->mclk = hz; > > > - host->ddr = ddr; > > > + host->timing = timing; > > > /* need because clk changed. */ > > > msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); > > > sdr_set_bits(host->base + MSDC_INTEN, flags); > > > > > > - dev_dbg(host->dev, "sclk: %d, ddr: %d\n", host->sclk, ddr); > > > + dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing); > > > } > > > > > > static inline u32 msdc_cmd_find_resp(struct msdc_host *host, > > > @@ -725,10 +770,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events, > > > if (done) > > > return true; > > > > > > - sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY | > > > - MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO | > > > - MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR | > > > - MSDC_INTEN_ACMDTMO); > > > + sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask); > > > > This belongs to separate code improvement patch. > > > OK, will separate it. > > > > > > if (cmd->flags & MMC_RSP_PRESENT) { > > > if (cmd->flags & MMC_RSP_136) { > > > @@ -818,10 +860,7 @@ static void msdc_start_command(struct msdc_host *host, > > > rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd); > > > mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT); > > > > > > - sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY | > > > - MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO | > > > - MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR | > > > - MSDC_INTEN_ACMDTMO); > > > + sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask); > > > > This belongs to separate code improvement patch. > OK, will separate it. > > > > > writel(cmd->arg, host->base + SDC_ARG); > > > writel(rawcmd, host->base + SDC_CMD); > > > } > > > @@ -895,7 +934,7 @@ static void msdc_data_xfer_next(struct msdc_host *host, > > > struct mmc_request *mrq, struct mmc_data *data) > > > { > > > if (mmc_op_multi(mrq->cmd->opcode) && mrq->stop && !mrq->stop->error && > > > - (!data->bytes_xfered || !mrq->sbc)) > > > + !mrq->sbc) > > > msdc_start_command(host, mrq, mrq->stop); > > > else > > > msdc_request_done(host, mrq); > > > @@ -929,7 +968,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, > > > while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS) > > > cpu_relax(); > > > sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask); > > > - dev_dbg(host->dev, "DMA stop\n"); > > > + dev_dbg(host->dev, "DMA stop event:0x%x\n", events); > > > > Perhaps a separate debug patch? > will add it to the improvement patch. > > > > > > > > if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) { > > > data->bytes_xfered = data->blocks * data->blksz; > > > @@ -941,6 +980,8 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, > > > > > > if (events & MSDC_INT_DATTMO) > > > data->error = -ETIMEDOUT; > > > + else if (events & MSDC_INT_DATCRCERR) > > > + data->error = -EILSEQ; > > > > > > dev_err(host->dev, "%s: cmd=%d; blocks=%d", > > > __func__, mrq->cmd->opcode, data->blocks); > > > @@ -1112,10 +1153,14 @@ static void msdc_init_hw(struct msdc_host *host) > > > > > > writel(0, host->base + MSDC_PAD_TUNE); > > > writel(0, host->base + MSDC_IOCON); > > > - sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 1); > > > - writel(0x403c004f, host->base + MSDC_PATCH_BIT); > > > + sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0); > > > + writel(0x403c0046, host->base + MSDC_PATCH_BIT); > > > sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1); > > > writel(0xffff0089, host->base + MSDC_PATCH_BIT1); > > > + sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); > > > + > > > + if (host->mmc->caps2 & MMC_CAP2_HS400_1_8V) > > > > Should you really do this even if the HS400 mode isn't supported by > > the card, and thus we will never switch timing to that mode? > > > > So, I am kind of wondering if this shouldn't be conditional depending > > on the current selected timing mode. Or perhaps you need this done > > from a ->prepare_hs400_tuning() callback)? > > > Actually, set this register has no impact to the none HS400 mode. > anyway, put it to ->prepare_hs400_tuning() is better, will do it > at next revision. > > > + writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE); > > > /* Configure to enable SDIO mode. > > > * it's must otherwise sdio cmd5 failed > > > */ > > > @@ -1151,7 +1196,6 @@ static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma) > > > > > > gpd->gpd_info = GPDMA_DESC_BDP; /* hwo, cs, bd pointer */ > > > gpd->ptr = (u32)dma->bd_addr; /* physical address */ > > > - > > > > White space. > > > will fix at next revision. > > > memset(bd, 0, sizeof(struct mt_bdma_desc) * MAX_BD_NUM); > > > for (i = 0; i < (MAX_BD_NUM - 1); i++) > > > bd[i].next = (u32)dma->bd_addr + sizeof(*bd) * (i + 1); > > > @@ -1161,20 +1205,16 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > > { > > > struct msdc_host *host = mmc_priv(mmc); > > > int ret; > > > - u32 ddr = 0; > > > > > > pm_runtime_get_sync(host->dev); > > > > > > - if (ios->timing == MMC_TIMING_UHS_DDR50 || > > > - ios->timing == MMC_TIMING_MMC_DDR52) > > > - ddr = 1; > > > - > > > msdc_set_buswidth(host, ios->bus_width); > > > > > > /* Suspend/Resume will do power off/on */ > > > switch (ios->power_mode) { > > > case MMC_POWER_UP: > > > if (!IS_ERR(mmc->supply.vmmc)) { > > > + msdc_init_hw(host); > > > ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, > > > ios->vdd); > > > if (ret) { > > > @@ -1205,14 +1245,259 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) > > > break; > > > } > > > > > > - if (host->mclk != ios->clock || host->ddr != ddr) > > > - msdc_set_mclk(host, ddr, ios->clock); > > > + if (host->mclk != ios->clock || host->timing != ios->timing) > > > + msdc_set_mclk(host, ios->timing, ios->clock); > > > > > > end: > > > pm_runtime_mark_last_busy(host->dev); > > > pm_runtime_put_autosuspend(host->dev); > > > } > > > > > > +static u32 test_delay_bit(u32 delay, u32 bit) > > > +{ > > > + bit %= DELAY_MAX; > > > + return delay & (1 << bit); > > > +} > > > + > > > +static int get_delay_len(u32 delay, u32 start_bit) > > > +{ > > > + int i; > > > + > > > + for (i = 0; i < (DELAY_MAX - start_bit); i++) { > > > + if (test_delay_bit(delay, start_bit + i) == 0) > > > + return i; > > > + } > > > + return DELAY_MAX - start_bit; > > > +} > > > + > > > +static struct msdc_delay_phase get_best_delay(u32 delay) > > > +{ > > > + int start = 0, len = 0; > > > + int start_final = 0, len_final = 0; > > > + u8 final_phase = 0xff; > > > + struct msdc_delay_phase delay_phase; > > > + > > > + if (delay == 0) { > > > + pr_err("phase error: [map:%x]\n", delay); > > > > Please use dev_err|warn|dbg|info instead. > > > As you know, this function is just only parse the argument "u32 delay", > it do not bind with any device. Then please add the appropriate context pointer to this function. Messages without any context are not helpful to the reader. Sascha
[...] >> > >> > struct clk *src_clk; /* msdc source clock */ >> > + struct clk *src_clk_parent; /* src_clk's parent */ >> > + struct clk *hs400_src; /* 400Mhz source clock */ >> >> Hmm, so you need to control the upper level clocks. Can you elaborate >> on why this is needed? >> > hs400 is DDR200, in our host design, if the mode is DDR(HS400), if want > to get 200Mhz mmc bus clock frequency, the minimum source clock is > double of the mmc bus clock, So, we need it for HS400 mode with 200Mhz > bus clock. Thanks for clarifying. [...] > flags = readl(host->base + MSDC_INTEN); >> > sdr_clr_bits(host->base + MSDC_INTEN, flags); >> > - if (ddr) { /* may need to modify later */ >> > - mode = 0x2; /* ddr mode and use divisor */ >> > + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); >> > + if (timing == MMC_TIMING_UHS_DDR50 || >> > + timing == MMC_TIMING_MMC_DDR52 || >> >> So, no support for HS200? >> > HS200 is the same with other SDR modes, so it will be handled at else.. Okay, nice! So, your the driver currently supports HS200, but without need for tuning!? [...] >> > +static struct msdc_delay_phase get_best_delay(u32 delay) >> > +{ >> > + int start = 0, len = 0; >> > + int start_final = 0, len_final = 0; >> > + u8 final_phase = 0xff; >> > + struct msdc_delay_phase delay_phase; >> > + >> > + if (delay == 0) { >> > + pr_err("phase error: [map:%x]\n", delay); >> >> Please use dev_err|warn|dbg|info instead. >> > As you know, this function is just only parse the argument "u32 delay", > it do not bind with any device. You may just add a msdc_host * as a parameter to the function, that would solve this. [...] >> > +static int msdc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error) >> >> I think you can remove this function and use mmc_send_tuning() instead. > Hmm, I also noticed that there was a mmc_send_tuning, but, I need to get > the cmd_error when tune cmd response, in this case, do not care the data > error. Well, if you need to extend the mmc_send_tuning() API to suite your needs, let's do that instead of duplicating code. >> >> > +{ >> > + struct mmc_request mrq = {NULL}; >> > + struct mmc_command cmd = {0}; >> > + struct mmc_data data = {0}; >> > + struct scatterlist sg; >> > + struct mmc_ios *ios = &host->ios; >> > + int size, err = 0; >> > + u8 *data_buf; >> > + >> > + if (ios->bus_width == MMC_BUS_WIDTH_8) >> > + size = 128; >> > + else if (ios->bus_width == MMC_BUS_WIDTH_4) >> > + size = 64; >> > + else >> > + return -EINVAL; >> > + >> > + data_buf = kzalloc(size, GFP_KERNEL); >> > + if (!data_buf) >> > + return -ENOMEM; >> > + >> > + mrq.cmd = &cmd; >> > + mrq.data = &data; >> > + >> > + cmd.opcode = opcode; >> > + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; >> > + >> > + data.blksz = size; >> > + data.blocks = 1; >> > + data.flags = MMC_DATA_READ; >> > + >> > + /* >> > + * According to the tuning specs, Tuning process >> > + * is normally shorter 40 executions of CMD19, >> > + * and timeout value should be shorter than 150 ms >> > + */ >> > + data.timeout_ns = 150 * NSEC_PER_MSEC; >> > + >> > + data.sg = &sg; >> > + data.sg_len = 1; >> > + sg_init_one(&sg, data_buf, size); >> > + >> > + mmc_wait_for_req(host, &mrq); >> > + >> > + if (cmd_error) >> > + *cmd_error = cmd.error; >> > + >> > + if (cmd.error) { >> > + err = cmd.error; >> > + goto out; >> > + } >> > + >> > + if (data.error) { >> > + err = data.error; >> > + goto out; >> > + } >> > + >> > +out: >> > + kfree(data_buf); >> > + return err; >> > +} >> > + [...] >> > + host->src_clk_parent = clk_get_parent(host->src_clk); >> >> Don't you need to check the return value here? >> > will check it. >> > + host->hs400_src = devm_clk_get(&pdev->dev, "400mhz"); >> >> That's a really weird conid for a clock. If it's not too late to >> change, please do that! >> >> > + if (IS_ERR(host->hs400_src)) { >> > + dev_dbg(&pdev->dev, "Cannot find 400mhz at dts!\n"); >> > + } else if (clk_set_parent(host->src_clk_parent, host->hs400_src) < 0) { >> > + dev_err(host->dev, "Failed to set 400mhz source clock!\n"); >> > + ret = -EINVAL; >> >> I think it seems more apropriate to use the return value from >> clk_set_parent() instead of inventing your own return value. >> > OK. >> > + goto host_free; >> > + } >> >> It seems like you don't need to store the src_clk_parent and the >> hs400_src in the host struct, as you are only using it during >> ->probe(). > OK,will remove the member src_clk. According to your earlier clarification about the clock source and clock rate. I think a more proper solution would be to use the clk_set_min_rate() or clk_set_rate_range() API, instead of dealing with re-parenting of the clock as above. FYI, a clock provider may implement the ->determine_rate() ops to deal with re-parenting to find the requested clock rate. [...] Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, 2015-10-15 at 11:17 +0200, Ulf Hansson wrote: > [...] > > >> > > >> > struct clk *src_clk; /* msdc source clock */ > >> > + struct clk *src_clk_parent; /* src_clk's parent */ > >> > + struct clk *hs400_src; /* 400Mhz source clock */ > >> > >> Hmm, so you need to control the upper level clocks. Can you elaborate > >> on why this is needed? > >> > > hs400 is DDR200, in our host design, if the mode is DDR(HS400), if want > > to get 200Mhz mmc bus clock frequency, the minimum source clock is > > double of the mmc bus clock, So, we need it for HS400 mode with 200Mhz > > bus clock. > > Thanks for clarifying. > > [...] > > > flags = readl(host->base + MSDC_INTEN); > >> > sdr_clr_bits(host->base + MSDC_INTEN, flags); > >> > - if (ddr) { /* may need to modify later */ > >> > - mode = 0x2; /* ddr mode and use divisor */ > >> > + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); > >> > + if (timing == MMC_TIMING_UHS_DDR50 || > >> > + timing == MMC_TIMING_MMC_DDR52 || > >> > >> So, no support for HS200? > >> > > HS200 is the same with other SDR modes, so it will be handled at else.. > > Okay, nice! > > So, your the driver currently supports HS200, but without need for tuning!? > It support and need tuning for HS200, but do not support tuning for HS400, that's why we fixed the hs400_ds_delay by project. > [...] > > >> > +static struct msdc_delay_phase get_best_delay(u32 delay) > >> > +{ > >> > + int start = 0, len = 0; > >> > + int start_final = 0, len_final = 0; > >> > + u8 final_phase = 0xff; > >> > + struct msdc_delay_phase delay_phase; > >> > + > >> > + if (delay == 0) { > >> > + pr_err("phase error: [map:%x]\n", delay); > >> > >> Please use dev_err|warn|dbg|info instead. > >> > > As you know, this function is just only parse the argument "u32 delay", > > it do not bind with any device. > > You may just add a msdc_host * as a parameter to the function, that > would solve this. > Ok, will do it. > [...] > > >> > +static int msdc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error) > >> > >> I think you can remove this function and use mmc_send_tuning() instead. > > Hmm, I also noticed that there was a mmc_send_tuning, but, I need to get > > the cmd_error when tune cmd response, in this case, do not care the data > > error. > > Well, if you need to extend the mmc_send_tuning() API to suite your > needs, let's do that instead of duplicating code. > OK, will extend the mmc_send_tuning, but it need change other vendor's MMC driver, because it already use the mmc_send_tuning() > >> > >> > +{ > >> > + struct mmc_request mrq = {NULL}; > >> > + struct mmc_command cmd = {0}; > >> > + struct mmc_data data = {0}; > >> > + struct scatterlist sg; > >> > + struct mmc_ios *ios = &host->ios; > >> > + int size, err = 0; > >> > + u8 *data_buf; > >> > + > >> > + if (ios->bus_width == MMC_BUS_WIDTH_8) > >> > + size = 128; > >> > + else if (ios->bus_width == MMC_BUS_WIDTH_4) > >> > + size = 64; > >> > + else > >> > + return -EINVAL; > >> > + > >> > + data_buf = kzalloc(size, GFP_KERNEL); > >> > + if (!data_buf) > >> > + return -ENOMEM; > >> > + > >> > + mrq.cmd = &cmd; > >> > + mrq.data = &data; > >> > + > >> > + cmd.opcode = opcode; > >> > + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; > >> > + > >> > + data.blksz = size; > >> > + data.blocks = 1; > >> > + data.flags = MMC_DATA_READ; > >> > + > >> > + /* > >> > + * According to the tuning specs, Tuning process > >> > + * is normally shorter 40 executions of CMD19, > >> > + * and timeout value should be shorter than 150 ms > >> > + */ > >> > + data.timeout_ns = 150 * NSEC_PER_MSEC; > >> > + > >> > + data.sg = &sg; > >> > + data.sg_len = 1; > >> > + sg_init_one(&sg, data_buf, size); > >> > + > >> > + mmc_wait_for_req(host, &mrq); > >> > + > >> > + if (cmd_error) > >> > + *cmd_error = cmd.error; > >> > + > >> > + if (cmd.error) { > >> > + err = cmd.error; > >> > + goto out; > >> > + } > >> > + > >> > + if (data.error) { > >> > + err = data.error; > >> > + goto out; > >> > + } > >> > + > >> > +out: > >> > + kfree(data_buf); > >> > + return err; > >> > +} > >> > + > > [...] > > >> > + host->src_clk_parent = clk_get_parent(host->src_clk); > >> > >> Don't you need to check the return value here? > >> > > will check it. > >> > + host->hs400_src = devm_clk_get(&pdev->dev, "400mhz"); > >> > >> That's a really weird conid for a clock. If it's not too late to > >> change, please do that! > >> > >> > + if (IS_ERR(host->hs400_src)) { > >> > + dev_dbg(&pdev->dev, "Cannot find 400mhz at dts!\n"); > >> > + } else if (clk_set_parent(host->src_clk_parent, host->hs400_src) < 0) { > >> > + dev_err(host->dev, "Failed to set 400mhz source clock!\n"); > >> > + ret = -EINVAL; > >> > >> I think it seems more apropriate to use the return value from > >> clk_set_parent() instead of inventing your own return value. > >> > > OK. > >> > + goto host_free; > >> > + } > >> > >> It seems like you don't need to store the src_clk_parent and the > >> hs400_src in the host struct, as you are only using it during > >> ->probe(). > > OK,will remove the member src_clk. > > According to your earlier clarification about the clock source and > clock rate. I think a more proper solution would be to use the > clk_set_min_rate() or clk_set_rate_range() API, instead of dealing > with re-parenting of the clock as above. > > FYI, a clock provider may implement the ->determine_rate() ops to deal > with re-parenting to find the requested clock rate. > Actually, at first, I use the clk_set_rate(), but our CCF owner suggests to use clk_set_parent, because the same clock frequency, may have several parent clock. by the way, Sascha suggests to use the "assigned-clocks" and "assigned-clock-parents", I tried and it works, and ,will move it from mt8173.dtsi to mt8173-evb.dts, because customer may want use other parent clock in it's projects. Thx! > [...] > > Kind regards > Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index b2e89d3..f12a50a 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -26,6 +26,7 @@ #include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/regulator/consumer.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/mmc/card.h> @@ -64,6 +65,7 @@ #define SDC_RESP2 0x48 #define SDC_RESP3 0x4c #define SDC_BLK_NUM 0x50 +#define EMMC_IOCON 0x7c #define SDC_ACMD_RESP 0x80 #define MSDC_DMA_SA 0x90 #define MSDC_DMA_CTRL 0x98 @@ -71,6 +73,8 @@ #define MSDC_PATCH_BIT 0xb0 #define MSDC_PATCH_BIT1 0xb4 #define MSDC_PAD_TUNE 0xec +#define PAD_DS_TUNE 0x188 +#define EMMC50_CFG0 0x208 /*--------------------------------------------------------------------------*/ /* Register Mask */ @@ -87,6 +91,7 @@ #define MSDC_CFG_CKSTB (0x1 << 7) /* R */ #define MSDC_CFG_CKDIV (0xff << 8) /* RW */ #define MSDC_CFG_CKMOD (0x3 << 16) /* RW */ +#define MSDC_CFG_HS400_CK_MODE (0x1 << 18) /* RW */ /* MSDC_IOCON mask */ #define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */ @@ -204,6 +209,17 @@ #define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ #define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ +#define MSDC_PAD_TUNE_DATRRDLY (0x1f << 8) /* RW */ +#define MSDC_PAD_TUNE_CMDRDLY (0x1f << 16) /* RW */ + +#define PAD_DS_TUNE_DLY1 (0x1f << 2) /* RW */ +#define PAD_DS_TUNE_DLY2 (0x1f << 7) /* RW */ +#define PAD_DS_TUNE_DLY3 (0x1f << 12) /* RW */ + +#define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0) /* RW */ +#define EMMC50_CFG_CRCSTS_EDGE (0x1 << 3) /* RW */ +#define EMMC50_CFG_CFCSTS_SEL (0x1 << 4) /* RW */ + #define REQ_CMD_EIO (0x1 << 0) #define REQ_CMD_TMO (0x1 << 1) #define REQ_DAT_ERR (0x1 << 2) @@ -219,6 +235,7 @@ #define CMD_TIMEOUT (HZ/10 * 5) /* 100ms x5 */ #define DAT_TIMEOUT (HZ * 5) /* 1000ms x5 */ +#define DELAY_MAX 32 /* PAD dalay cells */ /*--------------------------------------------------------------------------*/ /* Descriptor Structure */ /*--------------------------------------------------------------------------*/ @@ -265,6 +282,14 @@ struct msdc_save_para { u32 pad_tune; u32 patch_bit0; u32 patch_bit1; + u32 pad_ds_tune; + u32 emmc50_cfg0; +}; + +struct msdc_delay_phase { + u8 maxlen; + u8 start; + u8 final_phase; }; struct msdc_host { @@ -293,12 +318,15 @@ struct msdc_host { int irq; /* host interrupt */ struct clk *src_clk; /* msdc source clock */ + struct clk *src_clk_parent; /* src_clk's parent */ + struct clk *hs400_src; /* 400Mhz source clock */ struct clk *h_clk; /* msdc h_clk */ u32 mclk; /* mmc subsystem clock frequency */ u32 src_clk_freq; /* source clock frequency */ u32 sclk; /* SD/MS bus clock frequency */ - bool ddr; + unsigned char timing; bool vqmmc_enabled; + u32 hs400_ds_delay; struct msdc_save_para save_para; /* used when gate HCLK */ }; @@ -353,7 +381,10 @@ static void msdc_reset_hw(struct msdc_host *host) static void msdc_cmd_next(struct msdc_host *host, struct mmc_request *mrq, struct mmc_command *cmd); -static u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | +static const u32 cmd_ints_mask = MSDC_INTEN_CMDRDY | MSDC_INTEN_RSPCRCERR | + MSDC_INTEN_CMDTMO | MSDC_INTEN_ACMDRDY | + MSDC_INTEN_ACMDCRCERR | MSDC_INTEN_ACMDTMO; +static const u32 data_ints_mask = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR | MSDC_INTEN_DMA_BDCSERR | MSDC_INTEN_DMA_GPDCSERR | MSDC_INTEN_DMA_PROTECT; @@ -485,7 +516,7 @@ static void msdc_ungate_clock(struct msdc_host *host) cpu_relax(); } -static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) +static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz) { u32 mode; u32 flags; @@ -501,8 +532,15 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) flags = readl(host->base + MSDC_INTEN); sdr_clr_bits(host->base + MSDC_INTEN, flags); - if (ddr) { /* may need to modify later */ - mode = 0x2; /* ddr mode and use divisor */ + sdr_clr_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); + if (timing == MMC_TIMING_UHS_DDR50 || + timing == MMC_TIMING_MMC_DDR52 || + timing == MMC_TIMING_MMC_HS400) { + if (timing == MMC_TIMING_MMC_HS400) + mode = 0x3; + else + mode = 0x2; /* ddr mode and use divisor */ + if (hz >= (host->src_clk_freq >> 2)) { div = 0; /* mean div = 1/4 */ sclk = host->src_clk_freq >> 2; /* sclk = clk / 4 */ @@ -511,6 +549,13 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) sclk = (host->src_clk_freq >> 2) / div; div = (div >> 1); } + + if (timing == MMC_TIMING_MMC_HS400 && + hz >= (host->src_clk_freq >> 1)) { + sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_HS400_CK_MODE); + sclk = host->src_clk_freq >> 1; + div = 0; /* div is ignore when bit18 is set */ + } } else if (hz >= host->src_clk_freq) { mode = 0x1; /* no divisor */ div = 0; @@ -532,12 +577,12 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, u32 hz) cpu_relax(); host->sclk = sclk; host->mclk = hz; - host->ddr = ddr; + host->timing = timing; /* need because clk changed. */ msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); sdr_set_bits(host->base + MSDC_INTEN, flags); - dev_dbg(host->dev, "sclk: %d, ddr: %d\n", host->sclk, ddr); + dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing); } static inline u32 msdc_cmd_find_resp(struct msdc_host *host, @@ -725,10 +770,7 @@ static bool msdc_cmd_done(struct msdc_host *host, int events, if (done) return true; - sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY | - MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO | - MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR | - MSDC_INTEN_ACMDTMO); + sdr_clr_bits(host->base + MSDC_INTEN, cmd_ints_mask); if (cmd->flags & MMC_RSP_PRESENT) { if (cmd->flags & MMC_RSP_136) { @@ -818,10 +860,7 @@ static void msdc_start_command(struct msdc_host *host, rawcmd = msdc_cmd_prepare_raw_cmd(host, mrq, cmd); mod_delayed_work(system_wq, &host->req_timeout, DAT_TIMEOUT); - sdr_set_bits(host->base + MSDC_INTEN, MSDC_INTEN_CMDRDY | - MSDC_INTEN_RSPCRCERR | MSDC_INTEN_CMDTMO | - MSDC_INTEN_ACMDRDY | MSDC_INTEN_ACMDCRCERR | - MSDC_INTEN_ACMDTMO); + sdr_set_bits(host->base + MSDC_INTEN, cmd_ints_mask); writel(cmd->arg, host->base + SDC_ARG); writel(rawcmd, host->base + SDC_CMD); } @@ -895,7 +934,7 @@ static void msdc_data_xfer_next(struct msdc_host *host, struct mmc_request *mrq, struct mmc_data *data) { if (mmc_op_multi(mrq->cmd->opcode) && mrq->stop && !mrq->stop->error && - (!data->bytes_xfered || !mrq->sbc)) + !mrq->sbc) msdc_start_command(host, mrq, mrq->stop); else msdc_request_done(host, mrq); @@ -929,7 +968,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, while (readl(host->base + MSDC_DMA_CFG) & MSDC_DMA_CFG_STS) cpu_relax(); sdr_clr_bits(host->base + MSDC_INTEN, data_ints_mask); - dev_dbg(host->dev, "DMA stop\n"); + dev_dbg(host->dev, "DMA stop event:0x%x\n", events); if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) { data->bytes_xfered = data->blocks * data->blksz; @@ -941,6 +980,8 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, if (events & MSDC_INT_DATTMO) data->error = -ETIMEDOUT; + else if (events & MSDC_INT_DATCRCERR) + data->error = -EILSEQ; dev_err(host->dev, "%s: cmd=%d; blocks=%d", __func__, mrq->cmd->opcode, data->blocks); @@ -1112,10 +1153,14 @@ static void msdc_init_hw(struct msdc_host *host) writel(0, host->base + MSDC_PAD_TUNE); writel(0, host->base + MSDC_IOCON); - sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 1); - writel(0x403c004f, host->base + MSDC_PATCH_BIT); + sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_DDLSEL, 0); + writel(0x403c0046, host->base + MSDC_PATCH_BIT); sdr_set_field(host->base + MSDC_PATCH_BIT, MSDC_CKGEN_MSDC_DLY_SEL, 1); writel(0xffff0089, host->base + MSDC_PATCH_BIT1); + sdr_set_bits(host->base + EMMC50_CFG0, EMMC50_CFG_CFCSTS_SEL); + + if (host->mmc->caps2 & MMC_CAP2_HS400_1_8V) + writel(host->hs400_ds_delay, host->base + PAD_DS_TUNE); /* Configure to enable SDIO mode. * it's must otherwise sdio cmd5 failed */ @@ -1151,7 +1196,6 @@ static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma) gpd->gpd_info = GPDMA_DESC_BDP; /* hwo, cs, bd pointer */ gpd->ptr = (u32)dma->bd_addr; /* physical address */ - memset(bd, 0, sizeof(struct mt_bdma_desc) * MAX_BD_NUM); for (i = 0; i < (MAX_BD_NUM - 1); i++) bd[i].next = (u32)dma->bd_addr + sizeof(*bd) * (i + 1); @@ -1161,20 +1205,16 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct msdc_host *host = mmc_priv(mmc); int ret; - u32 ddr = 0; pm_runtime_get_sync(host->dev); - if (ios->timing == MMC_TIMING_UHS_DDR50 || - ios->timing == MMC_TIMING_MMC_DDR52) - ddr = 1; - msdc_set_buswidth(host, ios->bus_width); /* Suspend/Resume will do power off/on */ switch (ios->power_mode) { case MMC_POWER_UP: if (!IS_ERR(mmc->supply.vmmc)) { + msdc_init_hw(host); ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); if (ret) { @@ -1205,14 +1245,259 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; } - if (host->mclk != ios->clock || host->ddr != ddr) - msdc_set_mclk(host, ddr, ios->clock); + if (host->mclk != ios->clock || host->timing != ios->timing) + msdc_set_mclk(host, ios->timing, ios->clock); end: pm_runtime_mark_last_busy(host->dev); pm_runtime_put_autosuspend(host->dev); } +static u32 test_delay_bit(u32 delay, u32 bit) +{ + bit %= DELAY_MAX; + return delay & (1 << bit); +} + +static int get_delay_len(u32 delay, u32 start_bit) +{ + int i; + + for (i = 0; i < (DELAY_MAX - start_bit); i++) { + if (test_delay_bit(delay, start_bit + i) == 0) + return i; + } + return DELAY_MAX - start_bit; +} + +static struct msdc_delay_phase get_best_delay(u32 delay) +{ + int start = 0, len = 0; + int start_final = 0, len_final = 0; + u8 final_phase = 0xff; + struct msdc_delay_phase delay_phase; + + if (delay == 0) { + pr_err("phase error: [map:%x]\n", delay); + delay_phase.final_phase = final_phase; + return delay_phase; + } + + while (start < DELAY_MAX) { + len = get_delay_len(delay, start); + if (len_final < len) { + start_final = start; + len_final = len; + } + start += len ? len : 1; + if (len >= 8 && start_final < 4) + break; + } + + /* The rule is that to find the smallest delay cell */ + if (start_final == 0) + final_phase = (start_final + len_final / 3) % DELAY_MAX; + else + final_phase = (start_final + len_final / 2) % DELAY_MAX; + pr_info("phase: [map:%x] [maxlen:%d] [final:%d]\n", + delay, len_final, final_phase); + + delay_phase.maxlen = len_final; + delay_phase.start = start_final; + delay_phase.final_phase = final_phase; + return delay_phase; +} + +static int msdc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error) +{ + struct mmc_request mrq = {NULL}; + struct mmc_command cmd = {0}; + struct mmc_data data = {0}; + struct scatterlist sg; + struct mmc_ios *ios = &host->ios; + int size, err = 0; + u8 *data_buf; + + if (ios->bus_width == MMC_BUS_WIDTH_8) + size = 128; + else if (ios->bus_width == MMC_BUS_WIDTH_4) + size = 64; + else + return -EINVAL; + + data_buf = kzalloc(size, GFP_KERNEL); + if (!data_buf) + return -ENOMEM; + + mrq.cmd = &cmd; + mrq.data = &data; + + cmd.opcode = opcode; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + + data.blksz = size; + data.blocks = 1; + data.flags = MMC_DATA_READ; + + /* + * According to the tuning specs, Tuning process + * is normally shorter 40 executions of CMD19, + * and timeout value should be shorter than 150 ms + */ + data.timeout_ns = 150 * NSEC_PER_MSEC; + + data.sg = &sg; + data.sg_len = 1; + sg_init_one(&sg, data_buf, size); + + mmc_wait_for_req(host, &mrq); + + if (cmd_error) + *cmd_error = cmd.error; + + if (cmd.error) { + err = cmd.error; + goto out; + } + + if (data.error) { + err = data.error; + goto out; + } + +out: + kfree(data_buf); + return err; +} + +static int msdc_tune_response(struct mmc_host *mmc, u32 opcode) +{ + struct msdc_host *host = mmc_priv(mmc); + u32 rise_delay = 0, fall_delay = 0; + struct msdc_delay_phase final_rise_delay, final_fall_delay; + u8 final_delay, final_maxlen; + int cmd_err; + int i; + + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); + for (i = 0 ; i < DELAY_MAX; i++) { + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, i); + msdc_send_tuning(mmc, opcode, &cmd_err); + if (!cmd_err) + rise_delay |= (1 << i); + } + + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); + for (i = 0; i < DELAY_MAX; i++) { + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, i); + msdc_send_tuning(mmc, opcode, &cmd_err); + if (!cmd_err) + fall_delay |= (1 << i); + } + + final_rise_delay = get_best_delay(rise_delay); + final_fall_delay = get_best_delay(fall_delay); + + final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen); + if (final_maxlen == final_rise_delay.maxlen) { + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, + final_rise_delay.final_phase); + final_delay = final_rise_delay.final_phase; + } else { + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL); + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY, + final_fall_delay.final_phase); + final_delay = final_fall_delay.final_phase; + } + + return final_delay; +} + +static int msdc_tune_data(struct mmc_host *mmc, u32 opcode) +{ + struct msdc_host *host = mmc_priv(mmc); + u32 rise_delay = 0, fall_delay = 0; + struct msdc_delay_phase final_rise_delay, final_fall_delay; + u8 final_delay, final_maxlen; + int i, ret; + + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); + for (i = 0 ; i < DELAY_MAX; i++) { + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, i); + ret = msdc_send_tuning(mmc, opcode, NULL); + if (!ret) + rise_delay |= (1 << i); + } + + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); + for (i = 0; i < DELAY_MAX; i++) { + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, i); + ret = msdc_send_tuning(mmc, opcode, NULL); + if (!ret) + fall_delay |= (1 << i); + } + + final_rise_delay = get_best_delay(rise_delay); + final_fall_delay = get_best_delay(fall_delay); + + final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen); + /* Rising edge is more stable, prefer to use it */ + if (final_rise_delay.maxlen >= 10) + final_maxlen = final_rise_delay.maxlen; + if (final_maxlen == final_rise_delay.maxlen) { + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); + sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, + final_rise_delay.final_phase); + final_delay = final_rise_delay.final_phase; + } else { + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL); + sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL); + sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATRRDLY, + final_fall_delay.final_phase); + final_delay = final_fall_delay.final_phase; + } + + return final_delay; +} + +static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct msdc_host *host = mmc_priv(mmc); + int ret; + + pm_runtime_get_sync(host->dev); + ret = msdc_tune_response(mmc, opcode); + if (ret == 0xff) { + dev_err(host->dev, "Tune response fail!\n"); + ret = -EIO; + goto out; + } + ret = msdc_tune_data(mmc, opcode); + if (ret == 0xff) { + dev_err(host->dev, "Tune data fail!\n"); + ret = -EIO; + goto out; + } + ret = 0; +out: + pm_runtime_mark_last_busy(host->dev); + pm_runtime_put_autosuspend(host->dev); + return ret; +} + +static void msdc_hw_reset(struct mmc_host *mmc) +{ + struct msdc_host *host = mmc_priv(mmc); + + sdr_set_bits(host->base + EMMC_IOCON, 1); + udelay(10); /* 10us is enough */ + sdr_clr_bits(host->base + EMMC_IOCON, 1); +} + static struct mmc_host_ops mt_msdc_ops = { .post_req = msdc_post_req, .pre_req = msdc_pre_req, @@ -1220,6 +1505,8 @@ static struct mmc_host_ops mt_msdc_ops = { .set_ios = msdc_ops_set_ios, .start_signal_voltage_switch = msdc_ops_switch_volt, .card_busy = msdc_card_busy, + .execute_tuning = msdc_execute_tuning, + .hw_reset = msdc_hw_reset, }; static int msdc_drv_probe(struct platform_device *pdev) @@ -1260,6 +1547,16 @@ static int msdc_drv_probe(struct platform_device *pdev) goto host_free; } + host->src_clk_parent = clk_get_parent(host->src_clk); + host->hs400_src = devm_clk_get(&pdev->dev, "400mhz"); + if (IS_ERR(host->hs400_src)) { + dev_dbg(&pdev->dev, "Cannot find 400mhz at dts!\n"); + } else if (clk_set_parent(host->src_clk_parent, host->hs400_src) < 0) { + dev_err(host->dev, "Failed to set 400mhz source clock!\n"); + ret = -EINVAL; + goto host_free; + } + host->h_clk = devm_clk_get(&pdev->dev, "hclk"); if (IS_ERR(host->h_clk)) { ret = PTR_ERR(host->h_clk); @@ -1293,6 +1590,10 @@ static int msdc_drv_probe(struct platform_device *pdev) goto host_free; } + if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay", + &host->hs400_ds_delay)) + dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n", host->hs400_ds_delay); + host->dev = &pdev->dev; host->mmc = mmc; host->src_clk_freq = clk_get_rate(host->src_clk); @@ -1403,6 +1704,8 @@ static void msdc_save_reg(struct msdc_host *host) host->save_para.pad_tune = readl(host->base + MSDC_PAD_TUNE); host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT); host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1); + host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE); + host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0); } static void msdc_restore_reg(struct msdc_host *host) @@ -1413,6 +1716,8 @@ static void msdc_restore_reg(struct msdc_host *host) writel(host->save_para.pad_tune, host->base + MSDC_PAD_TUNE); writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT); writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1); + writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE); + writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0); } static int msdc_runtime_suspend(struct device *dev)
Add CMD19/CMD21 support for EMMC/SD/SDIO tuning Add HS400 mode support Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> --- drivers/mmc/host/mtk-sd.c | 359 ++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 332 insertions(+), 27 deletions(-)