Message ID | 1445008929-32267-3-git-send-email-Liviu.Dudau@arm.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Tue, Oct 20, 2015 at 11:33:13AM +0800, Alex Shi wrote: > Is there any concern to merge the juno r1 pcie DT part into upstream? Not that I've heard of. I've asked Catalin and Will if they need a pull request to get the patch into the arm64 tree but I haven't got an answer yet. Catalin, Will, are you OK with pulling this patch into arm64 and if so do you want me to send a different pull request or are you happy to fetch it from the git tree git://linux-arm.org/linux-ld.git for-upstream/juno-pcie. Best regards, Liviu > On Fri, Oct 16, 2015 at 11:22 PM, Liviu Dudau <[1]Liviu.Dudau@arm.com> wrote: > > Juno R1 board sports a functional PCIe host bridge that is > compliant with the SBSA standard found [1] here. With the right > firmware that initialises the XpressRICH3 controller one can > use the generic Host Bridge driver to use the PCIe hardware. > > Signed-off-by: Liviu Dudau <[2]Liviu.Dudau@arm.com> > Acked-by: Mark Rutland <[3]mark.rutland@arm.com> > > [1] [4]http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ > --- > arch/arm64/boot/dts/arm/juno-r1.dts | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts > index c627511..a25964d 100644 > --- a/arch/arm64/boot/dts/arm/juno-r1.dts > +++ b/arch/arm64/boot/dts/arm/juno-r1.dts > @@ -109,6 +109,26 @@ > > #include "juno-base.dtsi" > > + pcie-controller@40000000 { > + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; > + device_type = "pci"; > + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ > + bus-range = <0 255>; > + linux,pci-domain = <0>; > + #address-cells = <3>; > + #size-cells = <2>; > + dma-coherent; > + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, > + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, > + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, > + <0 0 0 2 &gic 0 0 0 137 4>, > + <0 0 0 3 &gic 0 0 0 138 4>, > + <0 0 0 4 &gic 0 0 0 139 4>; > + msi-parent = <&v2m_0>; > + }; > }; > > &memtimer { > -- > 2.6.0 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [5]majordomo@vger.kernel.org > More majordomo info at [6]http://vger.kernel.org/majordomo-info.html > Please read the FAQ at [7]http://www.tux.org/lkml/ > > -- > Thanks > Alex > > References > > Visible links > 1. mailto:Liviu.Dudau@arm.com > 2. mailto:Liviu.Dudau@arm.com > 3. mailto:mark.rutland@arm.com > 4. http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ > 5. mailto:majordomo@vger.kernel.org > 6. http://vger.kernel.org/majordomo-info.html > 7. http://www.tux.org/lkml/
diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index c627511..a25964d 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -109,6 +109,26 @@ #include "juno-base.dtsi" + pcie-controller@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, + <0 0 0 2 &gic 0 0 0 137 4>, + <0 0 0 3 &gic 0 0 0 138 4>, + <0 0 0 4 &gic 0 0 0 139 4>; + msi-parent = <&v2m_0>; + }; }; &memtimer {