| Message ID | 1445432242-16129-1-git-send-email-w-kwok2@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, Please ignore the subject patch which is exactly the same as the one [PATCH v1] ARM: keystone: dts: add PCI serdes driver bindings submitted earlier. Thanks, WingMan > -----Original Message----- > From: Kwok, WingMan > Sent: Wednesday, October 21, 2015 8:57 AM > To: robh+dt@kernel.org; pawel.moll@arm.com; mark.rutland@arm.com; > ijc+devicetree@hellion.org.uk; galak@codeaurora.org; KISHON VIJAY ABRAHAM; > Quadros, Roger; Karicheri, Muralidharan; bhelgaas@google.com; > ssantosh@kernel.org; linux@arm.linux.org.uk; devicetree@vger.kernel.org; > linux-kernel@vger.kernel.org; linux-pci@vger.kernel.org; linux-arm- > kernel@lists.infradead.org > Cc: Kwok, WingMan > Subject: [PATCH] ARM: keystone: dts: add PCI serdes driver bindings > > This patch adds the serdes phy driver dts bindings > for the keystone PCIe host driver. > > Signed-off-by: WingMan Kwok <w-kwok2@ti.com> > --- > arch/arm/boot/dts/k2e.dtsi | 10 ++++++++++ > arch/arm/boot/dts/keystone.dtsi | 10 ++++++++++ > 2 files changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi > index 675fb8e..5f7cc0a 100644 > --- a/arch/arm/boot/dts/k2e.dtsi > +++ b/arch/arm/boot/dts/k2e.dtsi > @@ -86,6 +86,15 @@ > gpio,syscon-dev = <&devctrl 0x240>; > }; > > + pcie1_phy: phy@2326000 { > + #phy-cells = <0>; > + compatible = "ti,keystone-serdes-pcie"; > + reg = <0x02326000 0x4000>; > + link-rate-kbps = <5000000>; > + num-lanes = <2>; > + status = "disabled"; > + }; > + > pcie1: pcie@21020000 { > compatible = "ti,keystone-pcie","snps,dw-pcie"; > clocks = <&clkpcie1>; > @@ -99,6 +108,7 @@ > status = "disabled"; > device_type = "pci"; > num-lanes = <2>; > + phys = <&pcie1_phy>; > > #interrupt-cells = <1>; > interrupt-map-mask = <0 0 0 7>; > diff --git a/arch/arm/boot/dts/keystone.dtsi > b/arch/arm/boot/dts/keystone.dtsi > index 72816d6..5c7c58a 100644 > --- a/arch/arm/boot/dts/keystone.dtsi > +++ b/arch/arm/boot/dts/keystone.dtsi > @@ -275,6 +275,15 @@ > ti,syscon-dev = <&devctrl 0x2a0>; > }; > > + pcie0_phy: phy@2320000 { > + #phy-cells = <0>; > + compatible = "ti,keystone-serdes-pcie"; > + reg = <0x02320000 0x4000>; > + link-rate-kbps = <5000000>; > + num-lanes = <2>; > + status = "disabled"; > + }; > + > pcie0: pcie@21800000 { > compatible = "ti,keystone-pcie", "snps,dw-pcie"; > clocks = <&clkpcie>; > @@ -288,6 +297,7 @@ > status = "disabled"; > device_type = "pci"; > num-lanes = <2>; > + phys = <&pcie0_phy>; > > #interrupt-cells = <1>; > interrupt-map-mask = <0 0 0 7>; > -- > 1.7.9.5
On 10/21/15 5:57 AM, WingMan Kwok wrote: > This patch adds the serdes phy driver dts bindings > for the keystone PCIe host driver. > > Signed-off-by: WingMan Kwok <w-kwok2@ti.com> > --- Keep me posted when driver gets merged. I will then pick this up. Regards, Santosh
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 675fb8e..5f7cc0a 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -86,6 +86,15 @@ gpio,syscon-dev = <&devctrl 0x240>; }; + pcie1_phy: phy@2326000 { + #phy-cells = <0>; + compatible = "ti,keystone-serdes-pcie"; + reg = <0x02326000 0x4000>; + link-rate-kbps = <5000000>; + num-lanes = <2>; + status = "disabled"; + }; + pcie1: pcie@21020000 { compatible = "ti,keystone-pcie","snps,dw-pcie"; clocks = <&clkpcie1>; @@ -99,6 +108,7 @@ status = "disabled"; device_type = "pci"; num-lanes = <2>; + phys = <&pcie1_phy>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 72816d6..5c7c58a 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -275,6 +275,15 @@ ti,syscon-dev = <&devctrl 0x2a0>; }; + pcie0_phy: phy@2320000 { + #phy-cells = <0>; + compatible = "ti,keystone-serdes-pcie"; + reg = <0x02320000 0x4000>; + link-rate-kbps = <5000000>; + num-lanes = <2>; + status = "disabled"; + }; + pcie0: pcie@21800000 { compatible = "ti,keystone-pcie", "snps,dw-pcie"; clocks = <&clkpcie>; @@ -288,6 +297,7 @@ status = "disabled"; device_type = "pci"; num-lanes = <2>; + phys = <&pcie0_phy>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>;
This patch adds the serdes phy driver dts bindings for the keystone PCIe host driver. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> --- arch/arm/boot/dts/k2e.dtsi | 10 ++++++++++ arch/arm/boot/dts/keystone.dtsi | 10 ++++++++++ 2 files changed, 20 insertions(+)