| Message ID | 1445445464-5056-13-git-send-email-tianyu.lan@intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Oct 22, 2015 at 12:37:44AM +0800, Lan Tianyu wrote: > Migration relies on tracking dirty page to migrate memory. > Hardware can't automatically mark a page as dirty after DMA > memory access. VF descriptor rings and data buffers are modified > by hardware when receive and transmit data. To track such dirty memory > manually, do dummy writes(read a byte and write it back) during receive > and transmit data. > > Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> > --- > drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 14 +++++++++++--- > 1 file changed, 11 insertions(+), 3 deletions(-) > > diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c > index d22160f..ce7bd7a 100644 > --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c > +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c > @@ -414,6 +414,9 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_q_vector *q_vector, > if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD))) > break; > > + /* write back status to mark page dirty */ Which page? the descriptor ring? What does marking it dirty accomplish though, given that we might migrate right before this happens? It might be a good idea to just specify addresses of rings to hypervisor, and have it send the ring pages after VM and the VF are stopped. > + eop_desc->wb.status = eop_desc->wb.status; > + Compiler is likely to optimize this out. You also probably need a wmb here ... > /* clear next_to_watch to prevent false hangs */ > tx_buffer->next_to_watch = NULL; > tx_buffer->desc_num = 0; > @@ -946,15 +949,17 @@ static struct sk_buff *ixgbevf_fetch_rx_buffer(struct ixgbevf_ring *rx_ring, > { > struct ixgbevf_rx_buffer *rx_buffer; > struct page *page; > + u8 *page_addr; > > rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; > page = rx_buffer->page; > prefetchw(page); > > - if (likely(!skb)) { > - void *page_addr = page_address(page) + > - rx_buffer->page_offset; > + /* Mark page dirty */ Looks like there's a race condition here: VM could migrate at this point. RX ring will indicate packet has been received, but page data would be stale. One solution I see is explicitly testing for this condition and discarding the packet. For example, hypervisor could increment some counter in RAM during migration. Then: x = read counter get packet from rx ring mark page dirty y = read counter if (x != y) discard packet > + page_addr = page_address(page) + rx_buffer->page_offset; > + *page_addr = *page_addr; Compiler is likely to optimize this out. You also probably need a wmb here ... > > + if (likely(!skb)) { > /* prefetch first cache line of first page */ > prefetch(page_addr); prefetch makes no sense if you read it right here. > #if L1_CACHE_BYTES < 128 > @@ -1032,6 +1037,9 @@ static int ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector, > if (!ixgbevf_test_staterr(rx_desc, IXGBE_RXD_STAT_DD)) > break; > > + /* Write back status to mark page dirty */ > + rx_desc->wb.upper.status_error = rx_desc->wb.upper.status_error; > + same question as for tx. > /* This memory barrier is needed to keep us from reading > * any other fields out of the rx_desc until we know the > * RXD_STAT_DD bit is set > -- > 1.8.4.rc0.1.g8f6a3e5.dirty > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index d22160f..ce7bd7a 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -414,6 +414,9 @@ static bool ixgbevf_clean_tx_irq(struct ixgbevf_q_vector *q_vector, if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD))) break; + /* write back status to mark page dirty */ + eop_desc->wb.status = eop_desc->wb.status; + /* clear next_to_watch to prevent false hangs */ tx_buffer->next_to_watch = NULL; tx_buffer->desc_num = 0; @@ -946,15 +949,17 @@ static struct sk_buff *ixgbevf_fetch_rx_buffer(struct ixgbevf_ring *rx_ring, { struct ixgbevf_rx_buffer *rx_buffer; struct page *page; + u8 *page_addr; rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; page = rx_buffer->page; prefetchw(page); - if (likely(!skb)) { - void *page_addr = page_address(page) + - rx_buffer->page_offset; + /* Mark page dirty */ + page_addr = page_address(page) + rx_buffer->page_offset; + *page_addr = *page_addr; + if (likely(!skb)) { /* prefetch first cache line of first page */ prefetch(page_addr); #if L1_CACHE_BYTES < 128 @@ -1032,6 +1037,9 @@ static int ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector, if (!ixgbevf_test_staterr(rx_desc, IXGBE_RXD_STAT_DD)) break; + /* Write back status to mark page dirty */ + rx_desc->wb.upper.status_error = rx_desc->wb.upper.status_error; + /* This memory barrier is needed to keep us from reading * any other fields out of the rx_desc until we know the * RXD_STAT_DD bit is set
Migration relies on tracking dirty page to migrate memory. Hardware can't automatically mark a page as dirty after DMA memory access. VF descriptor rings and data buffers are modified by hardware when receive and transmit data. To track such dirty memory manually, do dummy writes(read a byte and write it back) during receive and transmit data. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)