| Message ID | 1445422216-29375-15-git-send-email-sudeep.holla@arm.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Simon Horman |
| Headers | show |
On Wed, Oct 21, 2015 at 12:10 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: > Though the keyboard driver for GPIO buttons(gpio-keys) will continue to > check for/support the legacy "gpio-key,wakeup" boolean property to > enable gpio buttons as wakeup source, "wakeup-source" is the new > standard binding. > > This patch replaces the legacy "gpio-key,wakeup" with the unified > "wakeup-source" property in order to avoid any futher copy-paste > duplication. Thanks! I made the same changes to my local tree a few weeks ago, but never found time to send them out... > Cc: Simon Horman <horms@verge.net.au> > Cc: Magnus Damm <magnus.damm@gmail.com> > Cc: linux-sh@vger.kernel.org > Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 21/10/15 11:18, Geert Uytterhoeven wrote: > On Wed, Oct 21, 2015 at 12:10 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: >> Though the keyboard driver for GPIO buttons(gpio-keys) will continue to >> check for/support the legacy "gpio-key,wakeup" boolean property to >> enable gpio buttons as wakeup source, "wakeup-source" is the new >> standard binding. >> >> This patch replaces the legacy "gpio-key,wakeup" with the unified >> "wakeup-source" property in order to avoid any futher copy-paste >> duplication. > > Thanks! > > I made the same changes to my local tree a few weeks ago, but never found > time to send them out... > Ah OK, even I had these changes for long. I waited until I fixed all the binding documents(which was boring ;)) >> Cc: Simon Horman <horms@verge.net.au> >> Cc: Magnus Damm <magnus.damm@gmail.com> >> Cc: linux-sh@vger.kernel.org >> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > > Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> > Thanks
On Wed, Oct 21, 2015 at 11:23:03AM +0100, Sudeep Holla wrote: > > > On 21/10/15 11:18, Geert Uytterhoeven wrote: > >On Wed, Oct 21, 2015 at 12:10 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: > >>Though the keyboard driver for GPIO buttons(gpio-keys) will continue to > >>check for/support the legacy "gpio-key,wakeup" boolean property to > >>enable gpio buttons as wakeup source, "wakeup-source" is the new > >>standard binding. > >> > >>This patch replaces the legacy "gpio-key,wakeup" with the unified > >>"wakeup-source" property in order to avoid any futher copy-paste > >>duplication. > > > >Thanks! > > > >I made the same changes to my local tree a few weeks ago, but never found > >time to send them out... > > > > Ah OK, even I had these changes for long. I waited until I fixed all the > binding documents(which was boring ;)) > > >>Cc: Simon Horman <horms@verge.net.au> > >>Cc: Magnus Damm <magnus.damm@gmail.com> > >>Cc: linux-sh@vger.kernel.org > >>Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > > > >Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Can I clarify that you would like me to pick up this patch? If so I'm happy to do so. Else: Acked-by: Simon Horman <horms+renesas@verge.net.au> -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 22/10/15 01:50, Simon Horman wrote: > On Wed, Oct 21, 2015 at 11:23:03AM +0100, Sudeep Holla wrote: >> >> >> On 21/10/15 11:18, Geert Uytterhoeven wrote: >>> On Wed, Oct 21, 2015 at 12:10 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: >>>> Though the keyboard driver for GPIO buttons(gpio-keys) will continue to >>>> check for/support the legacy "gpio-key,wakeup" boolean property to >>>> enable gpio buttons as wakeup source, "wakeup-source" is the new >>>> standard binding. >>>> >>>> This patch replaces the legacy "gpio-key,wakeup" with the unified >>>> "wakeup-source" property in order to avoid any futher copy-paste >>>> duplication. >>> >>> Thanks! >>> >>> I made the same changes to my local tree a few weeks ago, but never found >>> time to send them out... >>> >> >> Ah OK, even I had these changes for long. I waited until I fixed all the >> binding documents(which was boring ;)) >> >>>> Cc: Simon Horman <horms@verge.net.au> >>>> Cc: Magnus Damm <magnus.damm@gmail.com> >>>> Cc: linux-sh@vger.kernel.org >>>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> >>> >>> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> > > Can I clarify that you would like me to pick up this patch? > If so I'm happy to do so. > Yes you can pick up this patch as it has no dependency on driver changes. > Else: > > Acked-by: Simon Horman <horms+renesas@verge.net.au> > Thanks.
On Thu, Oct 22, 2015 at 10:37:54AM +0100, Sudeep Holla wrote: > > > On 22/10/15 01:50, Simon Horman wrote: > >On Wed, Oct 21, 2015 at 11:23:03AM +0100, Sudeep Holla wrote: > >> > >> > >>On 21/10/15 11:18, Geert Uytterhoeven wrote: > >>>On Wed, Oct 21, 2015 at 12:10 PM, Sudeep Holla <sudeep.holla@arm.com> wrote: > >>>>Though the keyboard driver for GPIO buttons(gpio-keys) will continue to > >>>>check for/support the legacy "gpio-key,wakeup" boolean property to > >>>>enable gpio buttons as wakeup source, "wakeup-source" is the new > >>>>standard binding. > >>>> > >>>>This patch replaces the legacy "gpio-key,wakeup" with the unified > >>>>"wakeup-source" property in order to avoid any futher copy-paste > >>>>duplication. > >>> > >>>Thanks! > >>> > >>>I made the same changes to my local tree a few weeks ago, but never found > >>>time to send them out... > >>> > >> > >>Ah OK, even I had these changes for long. I waited until I fixed all the > >>binding documents(which was boring ;)) > >> > >>>>Cc: Simon Horman <horms@verge.net.au> > >>>>Cc: Magnus Damm <magnus.damm@gmail.com> > >>>>Cc: linux-sh@vger.kernel.org > >>>>Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> > >>> > >>>Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > >Can I clarify that you would like me to pick up this patch? > >If so I'm happy to do so. > > > > Yes you can pick up this patch as it has no dependency on driver changes. Thanks, I have queued this up for v4.5. It should appear in the devel branch of the renesas tree some time today. I will include it in the next branch, which is included in the linux-next tree, once v4.4-rc1 has been released. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index a4c425923c05..9b7eabd3eba3 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -110,7 +110,7 @@ gpios = <&pfc 324 GPIO_ACTIVE_LOW>; linux,code = <KEY_0>; label = "S16"; - gpio-key,wakeup; + wakeup-source; }; menu-key { diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 105d9c95de4a..78a21f2828df 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -85,7 +85,7 @@ gpios = <&pfc 99 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "SW3"; - gpio-key,wakeup; + wakeup-source; }; back-key { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 37dec5269491..8523c3d03de3 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -77,28 +77,28 @@ button@1 { linux,code = <KEY_1>; label = "SW2-1"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; button@2 { linux,code = <KEY_2>; label = "SW2-2"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; button@3 { linux,code = <KEY_3>; label = "SW2-3"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; button@4 { linux,code = <KEY_4>; label = "SW2-4"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index dc158845afdc..48cddfc25f72 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -79,77 +79,77 @@ gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_1>; label = "SW2-1"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-2 { gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_2>; label = "SW2-2"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-3 { gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_3>; label = "SW2-3"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-4 { gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_4>; label = "SW2-4"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-a { gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_A>; label = "SW30"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-b { gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_B>; label = "SW31"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-c { gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_C>; label = "SW32"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-d { gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_D>; label = "SW33"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-e { gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; linux,code = <KEY_E>; label = "SW34"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-f { gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_F>; label = "SW35"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; key-g { gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_G>; label = "SW36"; - gpio-key,wakeup; + wakeup-source; debounce-interval = <20>; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 24b4cd24dceb..710ea035d0f4 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -147,7 +147,7 @@ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; label = "SW1"; - gpio-key,wakeup; + wakeup-source; }; };
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: linux-sh@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> --- arch/arm/boot/dts/r8a73a4-ape6evm.dts | 2 +- arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 +- arch/arm/boot/dts/r8a7790-lager.dts | 8 ++++---- arch/arm/boot/dts/r8a7791-koelsch.dts | 22 +++++++++++----------- arch/arm/boot/dts/sh73a0-kzm9g.dts | 2 +- 5 files changed, 18 insertions(+), 18 deletions(-)