diff mbox

[V3,4/4] dma: add Qualcomm Technologies HIDMA channel driver

Message ID 1446958380-23298-5-git-send-email-okaya@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Sinan Kaya Nov. 8, 2015, 4:53 a.m. UTC
This patch adds support for hidma engine. The driver
consists of two logical blocks. The DMA engine interface
and the low-level interface. The hardware only supports
memcpy/memset and this driver only support memcpy
interface. HW and driver doesn't support slave interface.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 .../devicetree/bindings/dma/qcom_hidma.txt         |  18 +
 drivers/dma/qcom/Kconfig                           |   9 +
 drivers/dma/qcom/Makefile                          |   2 +
 drivers/dma/qcom/hidma.c                           | 743 ++++++++++++++++
 drivers/dma/qcom/hidma.h                           | 157 ++++
 drivers/dma/qcom/hidma_dbg.c                       | 225 +++++
 drivers/dma/qcom/hidma_ll.c                        | 944 +++++++++++++++++++++
 7 files changed, 2098 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma.txt
 create mode 100644 drivers/dma/qcom/hidma.c
 create mode 100644 drivers/dma/qcom/hidma.h
 create mode 100644 drivers/dma/qcom/hidma_dbg.c
 create mode 100644 drivers/dma/qcom/hidma_ll.c

Comments

kernel test robot Nov. 8, 2015, 7:13 p.m. UTC | #1
Hi Sinan,

[auto build test WARNING on: robh/for-next]
[also build test WARNING on: v4.3 next-20151106]

url:    https://github.com/0day-ci/linux/commits/Sinan-Kaya/ma-add-Qualcomm-Technologies-HIDMA-driver/20151108-125824
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux for-next
config: mn10300-allyesconfig (attached as .config)
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=mn10300 

All warnings (new ones prefixed by >>):

   In file included from include/linux/printk.h:277:0,
                    from include/linux/kernel.h:13,
                    from include/linux/list.h:8,
                    from include/linux/kobject.h:20,
                    from include/linux/device.h:17,
                    from include/linux/dmaengine.h:20,
                    from drivers/dma/qcom/hidma.c:45:
   drivers/dma/qcom/hidma.c: In function 'hidma_prep_dma_memcpy':
   include/linux/dynamic_debug.h:64:16: warning: format '%zu' expects argument of type 'size_t', but argument 7 has type 'unsigned int' [-Wformat=]
     static struct _ddebug  __aligned(8)   \
                   ^
   include/linux/dynamic_debug.h:84:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA'
     DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
     ^
   include/linux/device.h:1171:2: note: in expansion of macro 'dynamic_dev_dbg'
     dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
     ^
>> drivers/dma/qcom/hidma.c:391:2: note: in expansion of macro 'dev_dbg'
     dev_dbg(mdma->ddev.dev,
     ^

vim +/dev_dbg +391 drivers/dma/qcom/hidma.c

   375	
   376		mchan->allocated = 0;
   377		spin_unlock_irqrestore(&mchan->lock, irqflags);
   378		dev_dbg(mdma->ddev.dev, "freed channel for %u\n", mchan->dma_sig);
   379	}
   380	
   381	
   382	static struct dma_async_tx_descriptor *
   383	hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dma_dest,
   384				dma_addr_t dma_src, size_t len, unsigned long flags)
   385	{
   386		struct hidma_chan *mchan = to_hidma_chan(dmach);
   387		struct hidma_desc *mdesc = NULL;
   388		struct hidma_dev *mdma = mchan->dmadev;
   389		unsigned long irqflags;
   390	
 > 391		dev_dbg(mdma->ddev.dev,
   392			"memcpy: chan:%p dest:%pad src:%pad len:%zu\n", mchan,
   393			&dma_dest, &dma_src, len);
   394	
   395		/* Get free descriptor */
   396		spin_lock_irqsave(&mchan->lock, irqflags);
   397		if (!list_empty(&mchan->free)) {
   398			mdesc = list_first_entry(&mchan->free, struct hidma_desc,
   399						node);

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
Andy Shevchenko Nov. 8, 2015, 8:47 p.m. UTC | #2
On Sun, Nov 8, 2015 at 6:53 AM, Sinan Kaya <okaya@codeaurora.org> wrote:
> This patch adds support for hidma engine. The driver
> consists of two logical blocks. The DMA engine interface
> and the low-level interface. The hardware only supports
> memcpy/memset and this driver only support memcpy
> interface. HW and driver doesn't support slave interface.

Make lines a bit longer.

> +/*
> + * Qualcomm Technologies HIDMA DMA engine interface
> + *
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/*
> + * Copyright (C) Freescale Semicondutor, Inc. 2007, 2008.
> + * Copyright (C) Semihalf 2009
> + * Copyright (C) Ilya Yanok, Emcraft Systems 2010
> + * Copyright (C) Alexander Popov, Promcontroller 2014
> + *
> + * Written by Piotr Ziecik <kosmo@semihalf.com>. Hardware description
> + * (defines, structures and comments) was taken from MPC5121 DMA driver
> + * written by Hongjun Chen <hong-jun.chen@freescale.com>.
> + *
> + * Approved as OSADL project by a majority of OSADL members and funded
> + * by OSADL membership fees in 2009;  for details see www.osadl.org.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the Free
> + * Software Foundation; either version 2 of the License, or (at your option)
> + * any later version.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * The full GNU General Public License is included in this distribution in the
> + * file called COPYING.
> + */
> +
> +/* Linux Foundation elects GPLv2 license only. */
> +
> +#include <linux/dmaengine.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
> +#include <linux/of_dma.h>
> +#include <linux/property.h>
> +#include <linux/delay.h>
> +#include <linux/highmem.h>
> +#include <linux/io.h>
> +#include <linux/sched.h>
> +#include <linux/wait.h>
> +#include <linux/acpi.h>
> +#include <linux/irq.h>
> +#include <linux/atomic.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "../dmaengine.h"
> +#include "hidma.h"
> +
> +/*
> + * Default idle time is 2 seconds. This parameter can
> + * be overridden by changing the following
> + * /sys/bus/platform/devices/QCOM8061:<xy>/power/autosuspend_delay_ms
> + * during kernel boot.
> + */
> +#define AUTOSUSPEND_TIMEOUT            2000
> +#define ERR_INFO_SW                    0xFF
> +#define ERR_CODE_UNEXPECTED_TERMINATE  0x0
> +
> +static inline
> +struct hidma_dev *to_hidma_dev(struct dma_device *dmadev)
> +{
> +       return container_of(dmadev, struct hidma_dev, ddev);
> +}
> +
> +static inline
> +struct hidma_dev *to_hidma_dev_from_lldev(struct hidma_lldev **_lldevp)
> +{
> +       return container_of(_lldevp, struct hidma_dev, lldev);
> +}
> +
> +static inline
> +struct hidma_chan *to_hidma_chan(struct dma_chan *dmach)
> +{
> +       return container_of(dmach, struct hidma_chan, chan);
> +}
> +
> +static inline struct hidma_desc *
> +to_hidma_desc(struct dma_async_tx_descriptor *t)
> +{
> +       return container_of(t, struct hidma_desc, desc);
> +}
> +
> +static void hidma_free(struct hidma_dev *dmadev)
> +{
> +       dev_dbg(dmadev->ddev.dev, "free dmadev\n");
> +       INIT_LIST_HEAD(&dmadev->ddev.channels);
> +}
> +
> +static unsigned int nr_desc_prm;
> +module_param(nr_desc_prm, uint, 0644);
> +MODULE_PARM_DESC(nr_desc_prm,
> +                "number of descriptors (default: 0)");
> +
> +#define MAX_HIDMA_CHANNELS     64
> +static int event_channel_idx[MAX_HIDMA_CHANNELS] = {
> +       [0 ... (MAX_HIDMA_CHANNELS - 1)] = -1};
> +static unsigned int num_event_channel_idx;
> +module_param_array_named(event_channel_idx, event_channel_idx, int,
> +                       &num_event_channel_idx, 0644);
> +MODULE_PARM_DESC(event_channel_idx,
> +               "event channel index array for the notifications");
> +static atomic_t channel_ref_count;
> +
> +/* process completed descriptors */
> +static void hidma_process_completed(struct hidma_dev *mdma)
> +{
> +       dma_cookie_t last_cookie = 0;
> +       struct hidma_chan *mchan;
> +       struct hidma_desc *mdesc;
> +       struct dma_async_tx_descriptor *desc;
> +       unsigned long irqflags;
> +       struct list_head list;
> +       struct dma_chan *dmach = NULL;

Redundant assignment.

> +
> +       list_for_each_entry(dmach, &mdma->ddev.channels,
> +                       device_node) {
> +               mchan = to_hidma_chan(dmach);
> +               INIT_LIST_HEAD(&list);
> +
> +               /* Get all completed descriptors */
> +               spin_lock_irqsave(&mchan->lock, irqflags);
> +               list_splice_tail_init(&mchan->completed, &list);
> +               spin_unlock_irqrestore(&mchan->lock, irqflags);
> +
> +               /* Execute callbacks and run dependencies */
> +               list_for_each_entry(mdesc, &list, node) {
> +                       desc = &mdesc->desc;
> +
> +                       spin_lock_irqsave(&mchan->lock, irqflags);
> +                       dma_cookie_complete(desc);
> +                       spin_unlock_irqrestore(&mchan->lock, irqflags);
> +
> +                       if (desc->callback &&
> +                               (hidma_ll_status(mdma->lldev, mdesc->tre_ch)
> +                               == DMA_COMPLETE))
> +                               desc->callback(desc->callback_param);
> +
> +                       last_cookie = desc->cookie;
> +                       dma_run_dependencies(desc);
> +               }
> +
> +               /* Free descriptors */
> +               spin_lock_irqsave(&mchan->lock, irqflags);
> +               list_splice_tail_init(&list, &mchan->free);
> +               spin_unlock_irqrestore(&mchan->lock, irqflags);
> +       }
> +}
> +
> +/*
> + * Called once for each submitted descriptor.
> + * PM is locked once for each descriptor that is currently
> + * in execution.
> + */
> +static void hidma_callback(void *data)
> +{
> +       struct hidma_desc *mdesc = data;
> +       struct hidma_chan *mchan = to_hidma_chan(mdesc->desc.chan);
> +       unsigned long irqflags;
> +       struct dma_device *ddev = mchan->chan.device;
> +       struct hidma_dev *dmadev = to_hidma_dev(ddev);
> +       bool queued = false;
> +
> +       dev_dbg(dmadev->ddev.dev, "callback: data:0x%p\n", data);
> +
> +       spin_lock_irqsave(&mchan->lock, irqflags);
> +
> +       if (mdesc->node.next) {
> +               /* Delete from the active list, add to completed list */
> +               list_move_tail(&mdesc->node, &mchan->completed);
> +               queued = true;
> +       }
> +       spin_unlock_irqrestore(&mchan->lock, irqflags);
> +
> +       hidma_process_completed(dmadev);
> +
> +       if (queued) {
> +               pm_runtime_mark_last_busy(dmadev->ddev.dev);
> +               pm_runtime_put_autosuspend(dmadev->ddev.dev);
> +       }
> +}
> +
> +static int hidma_chan_init(struct hidma_dev *dmadev, u32 dma_sig)
> +{
> +       struct hidma_chan *mchan;
> +       struct dma_device *ddev;
> +
> +       mchan = devm_kzalloc(dmadev->ddev.dev, sizeof(*mchan), GFP_KERNEL);
> +       if (!mchan)
> +               return -ENOMEM;
> +
> +       ddev = &dmadev->ddev;
> +       mchan->dma_sig = dma_sig;
> +       mchan->dmadev = dmadev;
> +       mchan->chan.device = ddev;
> +       dma_cookie_init(&mchan->chan);
> +
> +       INIT_LIST_HEAD(&mchan->free);
> +       INIT_LIST_HEAD(&mchan->prepared);
> +       INIT_LIST_HEAD(&mchan->active);
> +       INIT_LIST_HEAD(&mchan->completed);
> +
> +       spin_lock_init(&mchan->lock);
> +       list_add_tail(&mchan->chan.device_node, &ddev->channels);
> +       dmadev->ddev.chancnt++;
> +       return 0;
> +}
> +
> +static void hidma_issue_pending(struct dma_chan *dmach)
> +{
> +       struct hidma_chan *mchan = to_hidma_chan(dmach);
> +       struct hidma_dev *dmadev = mchan->dmadev;
> +
> +       /* PM will be released in hidma_callback function. */
> +       pm_runtime_get_sync(dmadev->ddev.dev);
> +       hidma_ll_start(dmadev->lldev);
> +}
> +
> +static enum dma_status hidma_tx_status(struct dma_chan *dmach,
> +                                       dma_cookie_t cookie,
> +                                       struct dma_tx_state *txstate)
> +{
> +       enum dma_status ret;
> +       struct hidma_chan *mchan = to_hidma_chan(dmach);
> +
> +       if (mchan->paused)
> +               ret = DMA_PAUSED;
> +       else
> +               ret = dma_cookie_status(dmach, cookie, txstate);
> +
> +       return ret;
> +}
> +
> +/*
> + * Submit descriptor to hardware.
> + * Lock the PM for each descriptor we are sending.
> + */
> +static dma_cookie_t hidma_tx_submit(struct dma_async_tx_descriptor *txd)
> +{
> +       struct hidma_chan *mchan = to_hidma_chan(txd->chan);
> +       struct hidma_dev *dmadev = mchan->dmadev;
> +       struct hidma_desc *mdesc;
> +       unsigned long irqflags;
> +       dma_cookie_t cookie;
> +
> +       if (!hidma_ll_isenabled(dmadev->lldev))
> +               return -ENODEV;
> +
> +       mdesc = container_of(txd, struct hidma_desc, desc);
> +       spin_lock_irqsave(&mchan->lock, irqflags);
> +
> +       /* Move descriptor to active */
> +       list_move_tail(&mdesc->node, &mchan->active);
> +
> +       /* Update cookie */
> +       cookie = dma_cookie_assign(txd);
> +
> +       hidma_ll_queue_request(dmadev->lldev, mdesc->tre_ch);
> +       spin_unlock_irqrestore(&mchan->lock, irqflags);
> +
> +       return cookie;
> +}
> +
> +static int hidma_alloc_chan_resources(struct dma_chan *dmach)
> +{
> +       struct hidma_chan *mchan = to_hidma_chan(dmach);
> +       struct hidma_dev *dmadev = mchan->dmadev;
> +       int rc = 0;
> +       struct hidma_desc *mdesc, *tmp;
> +       unsigned long irqflags;
> +       LIST_HEAD(descs);
> +       u32 i;
> +
> +       if (mchan->allocated)
> +               return 0;
> +
> +       /* Alloc descriptors for this channel */
> +       for (i = 0; i < dmadev->nr_descriptors; i++) {
> +               mdesc = kzalloc(sizeof(struct hidma_desc), GFP_KERNEL);
> +               if (!mdesc) {
> +                       rc = -ENOMEM;
> +                       break;
> +               }
> +               dma_async_tx_descriptor_init(&mdesc->desc, dmach);
> +               mdesc->desc.flags = DMA_CTRL_ACK;
> +               mdesc->desc.tx_submit = hidma_tx_submit;
> +
> +               rc = hidma_ll_request(dmadev->lldev,
> +                               mchan->dma_sig, "DMA engine", hidma_callback,
> +                               mdesc, &mdesc->tre_ch);
> +               if (rc) {
> +                       dev_err(dmach->device->dev,
> +                               "channel alloc failed at %u\n", i);
> +                       kfree(mdesc);
> +                       break;
> +               }
> +               list_add_tail(&mdesc->node, &descs);
> +       }
> +
> +       if (rc) {
> +               /* return the allocated descriptors */
> +               list_for_each_entry_safe(mdesc, tmp, &descs, node) {
> +                       hidma_ll_free(dmadev->lldev, mdesc->tre_ch);
> +                       kfree(mdesc);
> +               }
> +               return rc;
> +       }
> +
> +       spin_lock_irqsave(&mchan->lock, irqflags);
> +       list_splice_tail_init(&descs, &mchan->free);
> +       mchan->allocated = true;
> +       spin_unlock_irqrestore(&mchan->lock, irqflags);
> +       dev_dbg(dmadev->ddev.dev,
> +               "allocated channel for %u\n", mchan->dma_sig);
> +       return 1;
> +}
> +
> +static void hidma_free_chan_resources(struct dma_chan *dmach)
> +{
> +       struct hidma_chan *mchan = to_hidma_chan(dmach);
> +       struct hidma_dev *mdma = mchan->dmadev;
> +       struct hidma_desc *mdesc, *tmp;
> +       unsigned long irqflags;
> +       LIST_HEAD(descs);
> +
> +       if (!list_empty(&mchan->prepared) ||
> +               !list_empty(&mchan->active) ||
> +               !list_empty(&mchan->completed)) {
> +               /*
> +                * We have unfinished requests waiting.
> +                * Terminate the request from the hardware.
> +                */
> +               hidma_cleanup_pending_tre(mdma->lldev, ERR_INFO_SW,
> +                               ERR_CODE_UNEXPECTED_TERMINATE);
> +
> +               /* Give enough time for completions to be called. */
> +               msleep(100);
> +       }
> +
> +       spin_lock_irqsave(&mchan->lock, irqflags);
> +       /* Channel must be idle */
> +       WARN_ON(!list_empty(&mchan->prepared));
> +       WARN_ON(!list_empty(&mchan->active));
> +       WARN_ON(!list_empty(&mchan->completed));
> +
> +       /* Move data */
> +       list_splice_tail_init(&mchan->free, &descs);
> +
> +       /* Free descriptors */
> +       list_for_each_entry_safe(mdesc, tmp, &descs, node) {
> +               hidma_ll_free(mdma->lldev, mdesc->tre_ch);
> +               list_del(&mdesc->node);
> +               kfree(mdesc);
> +       }
> +
> +       mchan->allocated = 0;
> +       spin_unlock_irqrestore(&mchan->lock, irqflags);
> +       dev_dbg(mdma->ddev.dev, "freed channel for %u\n", mchan->dma_sig);
> +}
> +
> +
> +static struct dma_async_tx_descriptor *
> +hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dma_dest,
> +                       dma_addr_t dma_src, size_t len, unsigned long flags)
> +{
> +       struct hidma_chan *mchan = to_hidma_chan(dmach);
> +       struct hidma_desc *mdesc = NULL;
> +       struct hidma_dev *mdma = mchan->dmadev;
> +       unsigned long irqflags;
> +
> +       dev_dbg(mdma->ddev.dev,
> +               "memcpy: chan:%p dest:%pad src:%pad len:%zu\n", mchan,
> +               &dma_dest, &dma_src, len);
> +
> +       /* Get free descriptor */
> +       spin_lock_irqsave(&mchan->lock, irqflags);
> +       if (!list_empty(&mchan->free)) {
> +               mdesc = list_first_entry(&mchan->free, struct hidma_desc,
> +                                       node);
> +               list_del(&mdesc->node);
> +       }
> +       spin_unlock_irqrestore(&mchan->lock, irqflags);
> +
> +       if (!mdesc)
> +               return NULL;
> +
> +       hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
> +                       dma_src, dma_dest, len, flags);
> +
> +       /* Place descriptor in prepared list */
> +       spin_lock_irqsave(&mchan->lock, irqflags);
> +       list_add_tail(&mdesc->node, &mchan->prepared);
> +       spin_unlock_irqrestore(&mchan->lock, irqflags);
> +
> +       return &mdesc->desc;
> +}
> +
> +static int hidma_terminate_all(struct dma_chan *chan)
> +{
> +       struct hidma_dev *dmadev;
> +       LIST_HEAD(head);
> +       unsigned long irqflags;
> +       LIST_HEAD(list);
> +       struct hidma_desc *tmp, *mdesc = NULL;
> +       int rc;
> +       struct hidma_chan *mchan;
> +
> +       mchan = to_hidma_chan(chan);
> +       dmadev = to_hidma_dev(mchan->chan.device);
> +       dev_dbg(dmadev->ddev.dev, "terminateall: chan:0x%p\n", mchan);
> +
> +       pm_runtime_get_sync(dmadev->ddev.dev);
> +       /* give completed requests a chance to finish */
> +       hidma_process_completed(dmadev);
> +
> +       spin_lock_irqsave(&mchan->lock, irqflags);
> +       list_splice_init(&mchan->active, &list);
> +       list_splice_init(&mchan->prepared, &list);
> +       list_splice_init(&mchan->completed, &list);
> +       spin_unlock_irqrestore(&mchan->lock, irqflags);
> +
> +       /* this suspends the existing transfer */
> +       rc = hidma_ll_pause(dmadev->lldev);
> +       if (rc) {
> +               dev_err(dmadev->ddev.dev, "channel did not pause\n");
> +               goto out;
> +       }
> +
> +       /* return all user requests */
> +       list_for_each_entry_safe(mdesc, tmp, &list, node) {
> +               struct dma_async_tx_descriptor  *txd = &mdesc->desc;
> +               dma_async_tx_callback callback = mdesc->desc.callback;
> +               void *param = mdesc->desc.callback_param;
> +               enum dma_status status;
> +
> +               dma_descriptor_unmap(txd);
> +
> +               status = hidma_ll_status(dmadev->lldev, mdesc->tre_ch);
> +               /*
> +                * The API requires that no submissions are done from a
> +                * callback, so we don't need to drop the lock here
> +                */
> +               if (callback && (status == DMA_COMPLETE))
> +                       callback(param);
> +
> +               dma_run_dependencies(txd);
> +
> +               /* move myself to free_list */
> +               list_move(&mdesc->node, &mchan->free);
> +       }
> +
> +       /* reinitialize the hardware */
> +       rc = hidma_ll_setup(dmadev->lldev);
> +
> +out:
> +       pm_runtime_mark_last_busy(dmadev->ddev.dev);
> +       pm_runtime_put_autosuspend(dmadev->ddev.dev);
> +       return rc;
> +}
> +
> +static int hidma_pause(struct dma_chan *chan)
> +{
> +       struct hidma_chan *mchan;
> +       struct hidma_dev *dmadev;
> +
> +       mchan = to_hidma_chan(chan);
> +       dmadev = to_hidma_dev(mchan->chan.device);
> +       dev_dbg(dmadev->ddev.dev, "pause: chan:0x%p\n", mchan);
> +
> +       if (!mchan->paused) {
> +               pm_runtime_get_sync(dmadev->ddev.dev);
> +               if (hidma_ll_pause(dmadev->lldev))
> +                       dev_warn(dmadev->ddev.dev, "channel did not stop\n");
> +               mchan->paused = true;
> +               pm_runtime_mark_last_busy(dmadev->ddev.dev);
> +               pm_runtime_put_autosuspend(dmadev->ddev.dev);
> +       }
> +       return 0;
> +}
> +
> +static int hidma_resume(struct dma_chan *chan)
> +{
> +       struct hidma_chan *mchan;
> +       struct hidma_dev *dmadev;
> +       int rc = 0;
> +
> +       mchan = to_hidma_chan(chan);
> +       dmadev = to_hidma_dev(mchan->chan.device);
> +       dev_dbg(dmadev->ddev.dev, "resume: chan:0x%p\n", mchan);
> +
> +       if (mchan->paused) {
> +               pm_runtime_get_sync(dmadev->ddev.dev);
> +               rc = hidma_ll_resume(dmadev->lldev);
> +               if (!rc)
> +                       mchan->paused = false;
> +               else
> +                       dev_err(dmadev->ddev.dev,
> +                                       "failed to resume the channel");
> +               pm_runtime_mark_last_busy(dmadev->ddev.dev);
> +               pm_runtime_put_autosuspend(dmadev->ddev.dev);
> +       }
> +       return rc;
> +}
> +
> +static irqreturn_t hidma_chirq_handler(int chirq, void *arg)
> +{
> +       struct hidma_lldev **lldev_ptr = arg;
> +       irqreturn_t ret;
> +       struct hidma_dev *dmadev = to_hidma_dev_from_lldev(lldev_ptr);
> +
> +       /*
> +        * All interrupts are request driven.
> +        * HW doesn't send an interrupt by itself.
> +        */
> +       pm_runtime_get_sync(dmadev->ddev.dev);
> +       ret = hidma_ll_inthandler(chirq, *lldev_ptr);
> +       pm_runtime_mark_last_busy(dmadev->ddev.dev);
> +       pm_runtime_put_autosuspend(dmadev->ddev.dev);
> +       return ret;
> +}
> +
> +static int hidma_probe(struct platform_device *pdev)
> +{
> +       struct hidma_dev *dmadev;
> +       int rc = 0;
> +       struct resource *trca_resource;
> +       struct resource *evca_resource;
> +       int chirq;
> +       int current_channel_index = atomic_read(&channel_ref_count);
> +       void *evca;
> +       void *trca;
> +
> +       pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
> +       pm_runtime_use_autosuspend(&pdev->dev);
> +       pm_runtime_set_active(&pdev->dev);
> +       pm_runtime_enable(&pdev->dev);
> +
> +       trca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);

> +       if (!trca_resource) {
> +               rc = -ENODEV;
> +               goto bailout;
> +       }

Why did you ignore my comment about this block?
Remove that condition entirely.

> +
> +       trca = devm_ioremap_resource(&pdev->dev, trca_resource);
> +       if (IS_ERR(trca)) {
> +               rc = -ENOMEM;
> +               goto bailout;
> +       }
> +
> +       evca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> +       if (!evca_resource) {
> +               rc = -ENODEV;
> +               goto bailout;
> +       }

Ditto.

> +
> +       evca = devm_ioremap_resource(&pdev->dev, evca_resource);
> +       if (IS_ERR(evca)) {
> +               rc = -ENOMEM;
> +               goto bailout;
> +       }
> +
> +       /*
> +        * This driver only handles the channel IRQs.
> +        * Common IRQ is handled by the management driver.
> +        */
> +       chirq = platform_get_irq(pdev, 0);
> +       if (chirq < 0) {
> +               rc = -ENODEV;
> +               goto bailout;
> +       }
> +
> +       dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
> +       if (!dmadev) {
> +               rc = -ENOMEM;
> +               goto bailout;
> +       }
> +
> +       INIT_LIST_HEAD(&dmadev->ddev.channels);
> +       spin_lock_init(&dmadev->lock);
> +       dmadev->ddev.dev = &pdev->dev;
> +       pm_runtime_get_sync(dmadev->ddev.dev);
> +
> +       dma_cap_set(DMA_MEMCPY, dmadev->ddev.cap_mask);
> +       if (WARN_ON(!pdev->dev.dma_mask)) {
> +               rc = -ENXIO;
> +               goto dmafree;
> +       }
> +
> +       dmadev->dev_evca = evca;
> +       dmadev->evca_resource = evca_resource;
> +       dmadev->dev_trca = trca;
> +       dmadev->trca_resource = trca_resource;
> +       dmadev->ddev.device_prep_dma_memcpy = hidma_prep_dma_memcpy;
> +       dmadev->ddev.device_alloc_chan_resources =
> +               hidma_alloc_chan_resources;
> +       dmadev->ddev.device_free_chan_resources = hidma_free_chan_resources;
> +       dmadev->ddev.device_tx_status = hidma_tx_status;
> +       dmadev->ddev.device_issue_pending = hidma_issue_pending;
> +       dmadev->ddev.device_pause = hidma_pause;
> +       dmadev->ddev.device_resume = hidma_resume;
> +       dmadev->ddev.device_terminate_all = hidma_terminate_all;
> +       dmadev->ddev.copy_align = 8;
> +
> +       device_property_read_u32(&pdev->dev, "desc-count",
> +                               &dmadev->nr_descriptors);
> +
> +       if (!dmadev->nr_descriptors && nr_desc_prm)
> +               dmadev->nr_descriptors = nr_desc_prm;
> +
> +       if (!dmadev->nr_descriptors)
> +               goto dmafree;
> +
> +       if (current_channel_index > MAX_HIDMA_CHANNELS)
> +               goto dmafree;
> +
> +       dmadev->evridx = -1;
> +       device_property_read_u32(&pdev->dev, "event-channel", &dmadev->evridx);
> +
> +       /* kernel command line override for the guest machine */
> +       if (event_channel_idx[current_channel_index] != -1)
> +               dmadev->evridx = event_channel_idx[current_channel_index];
> +
> +       if (dmadev->evridx == -1)
> +               goto dmafree;
> +
> +       /* Set DMA mask to 64 bits. */
> +       rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
> +       if (rc) {
> +               dev_warn(&pdev->dev, "unable to set coherent mask to 64");
> +               rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> +               if (rc)
> +                       goto dmafree;
> +       }
> +
> +       dmadev->lldev = hidma_ll_init(dmadev->ddev.dev,
> +                               dmadev->nr_descriptors, dmadev->dev_trca,
> +                               dmadev->dev_evca, dmadev->evridx);
> +       if (!dmadev->lldev) {
> +               rc = -EPROBE_DEFER;
> +               goto dmafree;
> +       }
> +
> +       rc = devm_request_irq(&pdev->dev, chirq, hidma_chirq_handler, 0,
> +                             "qcom-hidma", &dmadev->lldev);
> +       if (rc)
> +               goto uninit;
> +
> +       INIT_LIST_HEAD(&dmadev->ddev.channels);
> +       rc = hidma_chan_init(dmadev, 0);
> +       if (rc)
> +               goto uninit;
> +
> +       rc = dma_selftest_memcpy(&dmadev->ddev);
> +       if (rc)
> +               goto uninit;
> +
> +       rc = dma_async_device_register(&dmadev->ddev);
> +       if (rc)
> +               goto uninit;
> +
> +       hidma_debug_init(dmadev);
> +       dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
> +       platform_set_drvdata(pdev, dmadev);
> +       pm_runtime_mark_last_busy(dmadev->ddev.dev);
> +       pm_runtime_put_autosuspend(dmadev->ddev.dev);
> +       atomic_inc(&channel_ref_count);
> +       return 0;
> +
> +uninit:
> +       hidma_debug_uninit(dmadev);
> +       hidma_ll_uninit(dmadev->lldev);
> +dmafree:
> +       if (dmadev)
> +               hidma_free(dmadev);
> +bailout:
> +       pm_runtime_disable(&pdev->dev);
> +       pm_runtime_put_sync_suspend(&pdev->dev);

Are you sure this is appropriate sequence?

I think

pm_runtime_put();
pm_runtime_disable();

will do the job.

> +       return rc;
> +}
> +
> +static int hidma_remove(struct platform_device *pdev)
> +{
> +       struct hidma_dev *dmadev = platform_get_drvdata(pdev);
> +
> +       dev_dbg(&pdev->dev, "removing\n");

Useless message.

> +       pm_runtime_get_sync(dmadev->ddev.dev);
> +
> +       dma_async_device_unregister(&dmadev->ddev);
> +       hidma_debug_uninit(dmadev);
> +       hidma_ll_uninit(dmadev->lldev);
> +       hidma_free(dmadev);
> +
> +       dev_info(&pdev->dev, "HI-DMA engine removed\n");
> +       pm_runtime_put_sync_suspend(&pdev->dev);
> +       pm_runtime_disable(&pdev->dev);
> +
> +       return 0;
> +}
> +
> +#if IS_ENABLED(CONFIG_ACPI)
> +static const struct acpi_device_id hidma_acpi_ids[] = {
> +       {"QCOM8061"},
> +       {},
> +};
> +#endif
> +
> +static const struct of_device_id hidma_match[] = {
> +       { .compatible = "qcom,hidma-1.0", },
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, hidma_match);
> +
> +static struct platform_driver hidma_driver = {
> +       .probe = hidma_probe,
> +       .remove = hidma_remove,
> +       .driver = {
> +               .name = "hidma",
> +               .of_match_table = hidma_match,
> +               .acpi_match_table = ACPI_PTR(hidma_acpi_ids),
> +       },
> +};
> +module_platform_driver(hidma_driver);
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
> new file mode 100644
> index 0000000..195d6b5
> --- /dev/null
> +++ b/drivers/dma/qcom/hidma.h
> @@ -0,0 +1,157 @@
> +/*
> + * Qualcomm Technologies HIDMA data structures
> + *
> + * Copyright (c) 2014, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef QCOM_HIDMA_H
> +#define QCOM_HIDMA_H
> +
> +#include <linux/kfifo.h>
> +#include <linux/interrupt.h>
> +#include <linux/dmaengine.h>
> +
> +#define TRE_SIZE                       32 /* each TRE is 32 bytes  */
> +#define TRE_CFG_IDX                    0
> +#define TRE_LEN_IDX                    1
> +#define TRE_SRC_LOW_IDX                2
> +#define TRE_SRC_HI_IDX                 3
> +#define TRE_DEST_LOW_IDX               4
> +#define TRE_DEST_HI_IDX                5
> +
> +struct hidma_tx_status {
> +       u8 err_info;                    /* error record in this transfer    */
> +       u8 err_code;                    /* completion code                  */
> +};
> +
> +struct hidma_tre {
> +       atomic_t allocated;             /* if this channel is allocated     */
> +       bool queued;                    /* flag whether this is pending     */
> +       u16 status;                     /* status                           */
> +       u32 chidx;                      /* index of the tre         */
> +       u32 dma_sig;                    /* signature of the tre     */
> +       const char *dev_name;           /* name of the device               */
> +       void (*callback)(void *data);   /* requester callback               */
> +       void *data;                     /* Data associated with this channel*/
> +       struct hidma_lldev *lldev;      /* lldma device pointer             */
> +       u32 tre_local[TRE_SIZE / sizeof(u32) + 1]; /* TRE local copy        */
> +       u32 tre_index;                  /* the offset where this was written*/
> +       u32 int_flags;                  /* interrupt flags*/
> +};
> +
> +struct hidma_lldev {
> +       bool initialized;               /* initialized flag               */
> +       u8 trch_state;                  /* trch_state of the device       */
> +       u8 evch_state;                  /* evch_state of the device       */
> +       u8 evridx;                      /* event channel to notify        */
> +       u32 nr_tres;                    /* max number of configs          */
> +       spinlock_t lock;                /* reentrancy                     */
> +       struct hidma_tre *trepool;      /* trepool of user configs */
> +       struct device *dev;             /* device                         */
> +       void __iomem *trca;             /* Transfer Channel address       */
> +       void __iomem *evca;             /* Event Channel address          */
> +       struct hidma_tre
> +               **pending_tre_list;     /* Pointers to pending TREs       */
> +       struct hidma_tx_status
> +               *tx_status_list;        /* Pointers to pending TREs status*/
> +       s32 pending_tre_count;          /* Number of TREs pending         */
> +
> +       void *tre_ring;         /* TRE ring                       */
> +       dma_addr_t tre_ring_handle;     /* TRE ring to be shared with HW  */
> +       u32 tre_ring_size;              /* Byte size of the ring          */
> +       u32 tre_processed_off;          /* last processed TRE              */
> +
> +       void *evre_ring;                /* EVRE ring                       */
> +       dma_addr_t evre_ring_handle;    /* EVRE ring to be shared with HW  */
> +       u32 evre_ring_size;             /* Byte size of the ring          */
> +       u32 evre_processed_off; /* last processed EVRE             */
> +
> +       u32 tre_write_offset;           /* TRE write location              */
> +       struct tasklet_struct task;     /* task delivering notifications   */
> +       DECLARE_KFIFO_PTR(handoff_fifo,
> +               struct hidma_tre *);    /* pending TREs FIFO              */
> +};
> +
> +struct hidma_desc {
> +       struct dma_async_tx_descriptor  desc;
> +       /* link list node for this channel*/
> +       struct list_head                node;
> +       u32                             tre_ch;
> +};
> +
> +struct hidma_chan {
> +       bool                            paused;
> +       bool                            allocated;
> +       char                            dbg_name[16];
> +       u32                             dma_sig;
> +
> +       /*
> +        * active descriptor on this channel
> +        * It is used by the DMA complete notification to
> +        * locate the descriptor that initiated the transfer.
> +        */
> +       struct dentry                   *debugfs;
> +       struct dentry                   *stats;
> +       struct hidma_dev                *dmadev;
> +
> +       struct dma_chan                 chan;
> +       struct list_head                free;
> +       struct list_head                prepared;
> +       struct list_head                active;
> +       struct list_head                completed;
> +
> +       /* Lock for this structure */
> +       spinlock_t                      lock;
> +};
> +
> +struct hidma_dev {
> +       int                             evridx;
> +       u32                             nr_descriptors;
> +
> +       struct hidma_lldev              *lldev;
> +       void                            __iomem *dev_trca;
> +       struct resource                 *trca_resource;
> +       void                            __iomem *dev_evca;
> +       struct resource                 *evca_resource;
> +
> +       /* used to protect the pending channel list*/
> +       spinlock_t                      lock;
> +       struct dma_device               ddev;
> +
> +       struct dentry                   *debugfs;
> +       struct dentry                   *stats;
> +};
> +
> +int hidma_ll_request(struct hidma_lldev *llhndl, u32 dev_id,
> +                       const char *dev_name,
> +                       void (*callback)(void *data), void *data, u32 *tre_ch);
> +
> +void hidma_ll_free(struct hidma_lldev *llhndl, u32 tre_ch);
> +enum dma_status hidma_ll_status(struct hidma_lldev *llhndl, u32 tre_ch);
> +bool hidma_ll_isenabled(struct hidma_lldev *llhndl);
> +int hidma_ll_queue_request(struct hidma_lldev *llhndl, u32 tre_ch);
> +int hidma_ll_start(struct hidma_lldev *llhndl);
> +int hidma_ll_pause(struct hidma_lldev *llhndl);
> +int hidma_ll_resume(struct hidma_lldev *llhndl);
> +void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
> +       dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
> +int hidma_ll_setup(struct hidma_lldev *lldev);
> +struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,
> +                       void __iomem *trca, void __iomem *evca,
> +                       u8 evridx);
> +int hidma_ll_uninit(struct hidma_lldev *llhndl);
> +irqreturn_t hidma_ll_inthandler(int irq, void *arg);
> +void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
> +                               u8 err_code);
> +int hidma_debug_init(struct hidma_dev *dmadev);
> +void hidma_debug_uninit(struct hidma_dev *dmadev);
> +#endif
> diff --git a/drivers/dma/qcom/hidma_dbg.c b/drivers/dma/qcom/hidma_dbg.c
> new file mode 100644
> index 0000000..e0e6711
> --- /dev/null
> +++ b/drivers/dma/qcom/hidma_dbg.c
> @@ -0,0 +1,225 @@
> +/*
> + * Qualcomm Technologies HIDMA debug file
> + *
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/debugfs.h>
> +#include <linux/device.h>
> +#include <linux/list.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "hidma.h"
> +
> +void hidma_ll_chstats(struct seq_file *s, void *llhndl, u32 tre_ch)
> +{
> +       struct hidma_lldev *lldev = llhndl;
> +       struct hidma_tre *tre;
> +       u32 length;
> +       dma_addr_t src_start;
> +       dma_addr_t dest_start;
> +       u32 *tre_local;
> +
> +       if (tre_ch >= lldev->nr_tres) {
> +               dev_err(lldev->dev, "invalid TRE number in chstats:%d",
> +                       tre_ch);
> +               return;
> +       }
> +       tre = &lldev->trepool[tre_ch];
> +       seq_printf(s, "------Channel %d -----\n", tre_ch);
> +       seq_printf(s, "allocated=%d\n", atomic_read(&tre->allocated));
> +       seq_printf(s, "queued=0x%x\n", tre->queued);
> +       seq_printf(s, "err_info=0x%x\n",
> +                  lldev->tx_status_list[tre->chidx].err_info);
> +       seq_printf(s, "err_code=0x%x\n",
> +                  lldev->tx_status_list[tre->chidx].err_code);
> +       seq_printf(s, "status=0x%x\n", tre->status);
> +       seq_printf(s, "chidx=0x%x\n", tre->chidx);
> +       seq_printf(s, "dma_sig=0x%x\n", tre->dma_sig);
> +       seq_printf(s, "dev_name=%s\n", tre->dev_name);
> +       seq_printf(s, "callback=%p\n", tre->callback);
> +       seq_printf(s, "data=%p\n", tre->data);
> +       seq_printf(s, "tre_index=0x%x\n", tre->tre_index);
> +
> +       tre_local = &tre->tre_local[0];
> +       src_start = tre_local[TRE_SRC_LOW_IDX];
> +       src_start = ((u64)(tre_local[TRE_SRC_HI_IDX]) << 32) + src_start;
> +       dest_start = tre_local[TRE_DEST_LOW_IDX];
> +       dest_start += ((u64)(tre_local[TRE_DEST_HI_IDX]) << 32);
> +       length = tre_local[TRE_LEN_IDX];
> +
> +       seq_printf(s, "src=%pap\n", &src_start);
> +       seq_printf(s, "dest=%pap\n", &dest_start);
> +       seq_printf(s, "length=0x%x\n", length);
> +}
> +
> +void hidma_ll_devstats(struct seq_file *s, void *llhndl)
> +{
> +       struct hidma_lldev *lldev = llhndl;
> +
> +       seq_puts(s, "------Device -----\n");
> +       seq_printf(s, "lldev init=0x%x\n", lldev->initialized);
> +       seq_printf(s, "trch_state=0x%x\n", lldev->trch_state);
> +       seq_printf(s, "evch_state=0x%x\n", lldev->evch_state);
> +       seq_printf(s, "evridx=0x%x\n", lldev->evridx);
> +       seq_printf(s, "nr_tres=0x%x\n", lldev->nr_tres);
> +       seq_printf(s, "trca=%p\n", lldev->trca);
> +       seq_printf(s, "tre_ring=%p\n", lldev->tre_ring);
> +       seq_printf(s, "tre_ring_handle=%pap\n", &lldev->tre_ring_handle);
> +       seq_printf(s, "tre_ring_size=0x%x\n", lldev->tre_ring_size);
> +       seq_printf(s, "tre_processed_off=0x%x\n", lldev->tre_processed_off);
> +       seq_printf(s, "pending_tre_count=%d\n", lldev->pending_tre_count);
> +       seq_printf(s, "evca=%p\n", lldev->evca);
> +       seq_printf(s, "evre_ring=%p\n", lldev->evre_ring);
> +       seq_printf(s, "evre_ring_handle=%pap\n", &lldev->evre_ring_handle);
> +       seq_printf(s, "evre_ring_size=0x%x\n", lldev->evre_ring_size);
> +       seq_printf(s, "evre_processed_off=0x%x\n", lldev->evre_processed_off);
> +       seq_printf(s, "tre_write_offset=0x%x\n", lldev->tre_write_offset);
> +}
> +
> +/**
> + * hidma_chan_stats: display HIDMA channel statistics
> + *
> + * Display the statistics for the current HIDMA virtual channel device.
> + */
> +static int hidma_chan_stats(struct seq_file *s, void *unused)
> +{
> +       struct hidma_chan *mchan = s->private;
> +       struct hidma_desc *mdesc;
> +       struct hidma_dev *dmadev = mchan->dmadev;
> +
> +       pm_runtime_get_sync(dmadev->ddev.dev);
> +       seq_printf(s, "paused=%u\n", mchan->paused);
> +       seq_printf(s, "dma_sig=%u\n", mchan->dma_sig);
> +       seq_puts(s, "prepared\n");
> +       list_for_each_entry(mdesc, &mchan->prepared, node)
> +               hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
> +
> +       seq_puts(s, "active\n");
> +               list_for_each_entry(mdesc, &mchan->active, node)
> +                       hidma_ll_chstats(s, mchan->dmadev->lldev,
> +                               mdesc->tre_ch);
> +
> +       seq_puts(s, "completed\n");
> +               list_for_each_entry(mdesc, &mchan->completed, node)
> +                       hidma_ll_chstats(s, mchan->dmadev->lldev,
> +                               mdesc->tre_ch);
> +
> +       hidma_ll_devstats(s, mchan->dmadev->lldev);
> +       pm_runtime_mark_last_busy(dmadev->ddev.dev);
> +       pm_runtime_put_autosuspend(dmadev->ddev.dev);
> +       return 0;
> +}
> +
> +/**
> + * hidma_dma_info: display HIDMA device info
> + *
> + * Display the info for the current HIDMA device.
> + */
> +static int hidma_dma_info(struct seq_file *s, void *unused)
> +{
> +       struct hidma_dev *dmadev = s->private;
> +       resource_size_t sz;
> +
> +       seq_printf(s, "nr_descriptors=%d\n", dmadev->nr_descriptors);
> +       seq_printf(s, "dev_trca=%p\n", &dmadev->dev_trca);
> +       seq_printf(s, "dev_trca_phys=%pa\n",
> +               &dmadev->trca_resource->start);
> +       sz = resource_size(dmadev->trca_resource);
> +       seq_printf(s, "dev_trca_size=%pa\n", &sz);
> +       seq_printf(s, "dev_evca=%p\n", &dmadev->dev_evca);
> +       seq_printf(s, "dev_evca_phys=%pa\n",
> +               &dmadev->evca_resource->start);
> +       sz = resource_size(dmadev->evca_resource);
> +       seq_printf(s, "dev_evca_size=%pa\n", &sz);
> +       return 0;
> +}
> +
> +static int hidma_chan_stats_open(struct inode *inode, struct file *file)
> +{
> +       return single_open(file, hidma_chan_stats, inode->i_private);
> +}
> +
> +static int hidma_dma_info_open(struct inode *inode, struct file *file)
> +{
> +       return single_open(file, hidma_dma_info, inode->i_private);
> +}
> +
> +static const struct file_operations hidma_chan_fops = {
> +       .open = hidma_chan_stats_open,
> +       .read = seq_read,
> +       .llseek = seq_lseek,
> +       .release = single_release,
> +};
> +
> +static const struct file_operations hidma_dma_fops = {
> +       .open = hidma_dma_info_open,
> +       .read = seq_read,
> +       .llseek = seq_lseek,
> +       .release = single_release,
> +};
> +
> +void hidma_debug_uninit(struct hidma_dev *dmadev)
> +{
> +       debugfs_remove_recursive(dmadev->debugfs);
> +       debugfs_remove_recursive(dmadev->stats);
> +}
> +
> +int hidma_debug_init(struct hidma_dev *dmadev)
> +{
> +       int rc = 0;
> +       int chidx = 0;
> +       struct list_head *position = NULL;
> +
> +       dmadev->debugfs = debugfs_create_dir(dev_name(dmadev->ddev.dev),
> +                                               NULL);
> +       if (!dmadev->debugfs) {
> +               rc = -ENODEV;
> +               return rc;
> +       }
> +
> +       /* walk through the virtual channel list */
> +       list_for_each(position, &dmadev->ddev.channels) {
> +               struct hidma_chan *chan;
> +
> +               chan = list_entry(position, struct hidma_chan,
> +                               chan.device_node);
> +               sprintf(chan->dbg_name, "chan%d", chidx);
> +               chan->debugfs = debugfs_create_dir(chan->dbg_name,
> +                                               dmadev->debugfs);
> +               if (!chan->debugfs) {
> +                       rc = -ENOMEM;
> +                       goto cleanup;
> +               }
> +               chan->stats = debugfs_create_file("stats", S_IRUGO,
> +                               chan->debugfs, chan,
> +                               &hidma_chan_fops);
> +               if (!chan->stats) {
> +                       rc = -ENOMEM;
> +                       goto cleanup;
> +               }
> +               chidx++;
> +       }
> +
> +       dmadev->stats = debugfs_create_file("stats", S_IRUGO,
> +                       dmadev->debugfs, dmadev,
> +                       &hidma_dma_fops);
> +       if (!dmadev->stats) {
> +               rc = -ENOMEM;
> +               goto cleanup;
> +       }
> +
> +       return 0;
> +cleanup:
> +       hidma_debug_uninit(dmadev);
> +       return rc;
> +}
> diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
> new file mode 100644
> index 0000000..f5c0b8b
> --- /dev/null
> +++ b/drivers/dma/qcom/hidma_ll.c
> @@ -0,0 +1,944 @@
> +/*
> + * Qualcomm Technologies HIDMA DMA engine low level code
> + *
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/dmaengine.h>
> +#include <linux/slab.h>
> +#include <linux/interrupt.h>
> +#include <linux/mm.h>
> +#include <linux/highmem.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/delay.h>
> +#include <linux/atomic.h>
> +#include <linux/iopoll.h>
> +#include <linux/kfifo.h>
> +
> +#include "hidma.h"
> +
> +#define EVRE_SIZE                      16 /* each EVRE is 16 bytes */
> +
> +#define TRCA_CTRLSTS_OFFSET            0x0
> +#define TRCA_RING_LOW_OFFSET           0x8
> +#define TRCA_RING_HIGH_OFFSET          0xC
> +#define TRCA_RING_LEN_OFFSET           0x10
> +#define TRCA_READ_PTR_OFFSET           0x18
> +#define TRCA_WRITE_PTR_OFFSET          0x20
> +#define TRCA_DOORBELL_OFFSET           0x400
> +
> +#define EVCA_CTRLSTS_OFFSET            0x0
> +#define EVCA_INTCTRL_OFFSET            0x4
> +#define EVCA_RING_LOW_OFFSET           0x8
> +#define EVCA_RING_HIGH_OFFSET          0xC
> +#define EVCA_RING_LEN_OFFSET           0x10
> +#define EVCA_READ_PTR_OFFSET           0x18
> +#define EVCA_WRITE_PTR_OFFSET          0x20
> +#define EVCA_DOORBELL_OFFSET           0x400
> +
> +#define EVCA_IRQ_STAT_OFFSET           0x100
> +#define EVCA_IRQ_CLR_OFFSET            0x108
> +#define EVCA_IRQ_EN_OFFSET             0x110
> +
> +#define EVRE_CFG_IDX                   0
> +#define EVRE_LEN_IDX                   1
> +#define EVRE_DEST_LOW_IDX              2
> +#define EVRE_DEST_HI_IDX               3
> +
> +#define EVRE_ERRINFO_BIT_POS           24
> +#define EVRE_CODE_BIT_POS              28
> +
> +#define EVRE_ERRINFO_MASK              0xF
> +#define EVRE_CODE_MASK                 0xF
> +
> +#define CH_CONTROL_MASK                0xFF
> +#define CH_STATE_MASK                  0xFF
> +#define CH_STATE_BIT_POS               0x8
> +
> +#define MAKE64(high, low) (((u64)(high) << 32) | (low))
> +
> +#define IRQ_EV_CH_EOB_IRQ_BIT_POS      0
> +#define IRQ_EV_CH_WR_RESP_BIT_POS      1
> +#define IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS 9
> +#define IRQ_TR_CH_DATA_RD_ER_BIT_POS   10
> +#define IRQ_TR_CH_DATA_WR_ER_BIT_POS   11
> +#define IRQ_TR_CH_INVALID_TRE_BIT_POS  14
> +
> +#define        ENABLE_IRQS (BIT(IRQ_EV_CH_EOB_IRQ_BIT_POS) | \
> +               BIT(IRQ_EV_CH_WR_RESP_BIT_POS) | \
> +               BIT(IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) |   \
> +               BIT(IRQ_TR_CH_DATA_RD_ER_BIT_POS) |              \
> +               BIT(IRQ_TR_CH_DATA_WR_ER_BIT_POS) |              \
> +               BIT(IRQ_TR_CH_INVALID_TRE_BIT_POS))
> +
> +enum ch_command {
> +       CH_DISABLE = 0,
> +       CH_ENABLE = 1,
> +       CH_SUSPEND = 2,
> +       CH_RESET = 9,
> +};
> +
> +enum ch_state {
> +       CH_DISABLED = 0,
> +       CH_ENABLED = 1,
> +       CH_RUNNING = 2,
> +       CH_SUSPENDED = 3,
> +       CH_STOPPED = 4,
> +       CH_ERROR = 5,
> +       CH_IN_RESET = 9,
> +};
> +
> +enum tre_type {
> +       TRE_MEMCPY = 3,
> +       TRE_MEMSET = 4,
> +};
> +
> +enum evre_type {
> +       EVRE_DMA_COMPLETE = 0x23,
> +       EVRE_IMM_DATA = 0x24,
> +};
> +
> +enum err_code {
> +       EVRE_STATUS_COMPLETE = 1,
> +       EVRE_STATUS_ERROR = 4,
> +};
> +
> +void hidma_ll_free(struct hidma_lldev *lldev, u32 tre_ch)
> +{
> +       struct hidma_tre *tre;
> +
> +       if (tre_ch >= lldev->nr_tres) {
> +               dev_err(lldev->dev, "invalid TRE number in free:%d", tre_ch);
> +               return;
> +       }
> +
> +       tre = &lldev->trepool[tre_ch];
> +       if (atomic_read(&tre->allocated) != true) {
> +               dev_err(lldev->dev, "trying to free an unused TRE:%d",
> +                       tre_ch);
> +               return;
> +       }
> +
> +       atomic_set(&tre->allocated, 0);
> +       dev_dbg(lldev->dev, "free_dma: allocated:%d tre_ch:%d\n",
> +               atomic_read(&tre->allocated), tre_ch);
> +}
> +
> +int hidma_ll_request(struct hidma_lldev *lldev, u32 dma_sig,
> +                       const char *dev_name,
> +                       void (*callback)(void *data), void *data, u32 *tre_ch)
> +{
> +       u32 i;
> +       struct hidma_tre *tre = NULL;
> +       u32 *tre_local;
> +
> +       if (!tre_ch || !lldev)
> +               return -EINVAL;
> +
> +       /* need to have at least one empty spot in the queue */
> +       for (i = 0; i < lldev->nr_tres - 1; i++) {
> +               if (atomic_add_unless(&lldev->trepool[i].allocated, 1, 1))
> +                       break;
> +       }
> +
> +       if (i == (lldev->nr_tres - 1))
> +               return -ENOMEM;
> +
> +       tre = &lldev->trepool[i];
> +       tre->dma_sig = dma_sig;
> +       tre->dev_name = dev_name;
> +       tre->callback = callback;
> +       tre->data = data;
> +       tre->chidx = i;
> +       tre->status = 0;
> +       tre->queued = 0;
> +       lldev->tx_status_list[i].err_code = 0;
> +       tre->lldev = lldev;
> +       tre_local = &tre->tre_local[0];
> +       tre_local[TRE_CFG_IDX] = TRE_MEMCPY;
> +       tre_local[TRE_CFG_IDX] |= ((lldev->evridx & 0xFF) << 8);
> +       tre_local[TRE_CFG_IDX] |= BIT(16);      /* set IEOB */
> +       *tre_ch = i;
> +       if (callback)
> +               callback(data);
> +       return 0;
> +}
> +
> +/*
> + * Multiple TREs may be queued and waiting in the
> + * pending queue.
> + */
> +static void hidma_ll_tre_complete(unsigned long arg)
> +{
> +       struct hidma_lldev *lldev = (struct hidma_lldev *)arg;
> +       struct hidma_tre *tre;
> +
> +       while (kfifo_out(&lldev->handoff_fifo, &tre, 1)) {
> +               /* call the user if it has been read by the hardware*/
> +               if (tre->callback)
> +                       tre->callback(tre->data);
> +       }
> +}
> +
> +/*
> + * Called to handle the interrupt for the channel.
> + * Return a positive number if TRE or EVRE were consumed on this run.
> + * Return a positive number if there are pending TREs or EVREs.
> + * Return 0 if there is nothing to consume or no pending TREs/EVREs found.
> + */
> +static int hidma_handle_tre_completion(struct hidma_lldev *lldev)
> +{
> +       struct hidma_tre *tre;
> +       u32 evre_write_off;
> +       u32 evre_ring_size = lldev->evre_ring_size;
> +       u32 tre_ring_size = lldev->tre_ring_size;
> +       u32 num_completed = 0, tre_iterator, evre_iterator;
> +       unsigned long flags;
> +
> +       evre_write_off = readl_relaxed(lldev->evca + EVCA_WRITE_PTR_OFFSET);
> +       tre_iterator = lldev->tre_processed_off;
> +       evre_iterator = lldev->evre_processed_off;
> +
> +       if ((evre_write_off > evre_ring_size) ||
> +               ((evre_write_off % EVRE_SIZE) != 0)) {
> +               dev_err(lldev->dev, "HW reports invalid EVRE write offset\n");
> +               return 0;
> +       }
> +
> +       /*
> +        * By the time control reaches here the number of EVREs and TREs
> +        * may not match. Only consume the ones that hardware told us.
> +        */
> +       while ((evre_iterator != evre_write_off)) {
> +               u32 *current_evre = lldev->evre_ring + evre_iterator;
> +               u32 cfg;
> +               u8 err_info;
> +
> +               spin_lock_irqsave(&lldev->lock, flags);
> +               tre = lldev->pending_tre_list[tre_iterator / TRE_SIZE];
> +               if (!tre) {
> +                       spin_unlock_irqrestore(&lldev->lock, flags);
> +                       dev_warn(lldev->dev,
> +                               "tre_index [%d] and tre out of sync\n",
> +                               tre_iterator / TRE_SIZE);
> +                       tre_iterator += TRE_SIZE;
> +                       if (tre_iterator >= tre_ring_size)
> +                               tre_iterator -= tre_ring_size;
> +                       evre_iterator += EVRE_SIZE;
> +                       if (evre_iterator >= evre_ring_size)
> +                               evre_iterator -= evre_ring_size;
> +
> +                       continue;
> +               }
> +               lldev->pending_tre_list[tre->tre_index] = NULL;
> +
> +               /*
> +                * Keep track of pending TREs that SW is expecting to receive
> +                * from HW. We got one now. Decrement our counter.
> +                */
> +               lldev->pending_tre_count--;
> +               if (lldev->pending_tre_count < 0) {
> +                       dev_warn(lldev->dev,
> +                               "tre count mismatch on completion");
> +                       lldev->pending_tre_count = 0;
> +               }
> +
> +               spin_unlock_irqrestore(&lldev->lock, flags);
> +
> +               cfg = current_evre[EVRE_CFG_IDX];
> +               err_info = (cfg >> EVRE_ERRINFO_BIT_POS);
> +               err_info = err_info & EVRE_ERRINFO_MASK;
> +               lldev->tx_status_list[tre->chidx].err_info = err_info;
> +               lldev->tx_status_list[tre->chidx].err_code =
> +                       (cfg >> EVRE_CODE_BIT_POS) & EVRE_CODE_MASK;
> +               tre->queued = 0;
> +
> +               kfifo_put(&lldev->handoff_fifo, tre);
> +               tasklet_schedule(&lldev->task);
> +
> +               tre_iterator += TRE_SIZE;
> +               if (tre_iterator >= tre_ring_size)
> +                       tre_iterator -= tre_ring_size;
> +               evre_iterator += EVRE_SIZE;
> +               if (evre_iterator >= evre_ring_size)
> +                       evre_iterator -= evre_ring_size;
> +
> +               /*
> +                * Read the new event descriptor written by the HW.
> +                * As we are processing the delivered events, other events
> +                * get queued to the SW for processing.
> +                */
> +               evre_write_off =
> +                       readl_relaxed(lldev->evca + EVCA_WRITE_PTR_OFFSET);
> +               num_completed++;
> +       }
> +
> +       if (num_completed) {
> +               u32 evre_read_off = (lldev->evre_processed_off +
> +                               EVRE_SIZE * num_completed);
> +               u32 tre_read_off = (lldev->tre_processed_off +
> +                               TRE_SIZE * num_completed);
> +
> +               evre_read_off = evre_read_off % evre_ring_size;
> +               tre_read_off = tre_read_off % tre_ring_size;
> +
> +               writel(evre_read_off, lldev->evca + EVCA_DOORBELL_OFFSET);
> +
> +               /* record the last processed tre offset */
> +               lldev->tre_processed_off = tre_read_off;
> +               lldev->evre_processed_off = evre_read_off;
> +       }
> +
> +       return num_completed;
> +}
> +
> +void hidma_cleanup_pending_tre(struct hidma_lldev *lldev, u8 err_info,
> +                               u8 err_code)
> +{
> +       u32 tre_iterator;
> +       struct hidma_tre *tre;
> +       u32 tre_ring_size = lldev->tre_ring_size;
> +       int num_completed = 0;
> +       u32 tre_read_off;
> +       unsigned long flags;
> +
> +       tre_iterator = lldev->tre_processed_off;
> +       while (lldev->pending_tre_count) {
> +               int tre_index = tre_iterator / TRE_SIZE;
> +
> +               spin_lock_irqsave(&lldev->lock, flags);
> +               tre = lldev->pending_tre_list[tre_index];
> +               if (!tre) {
> +                       spin_unlock_irqrestore(&lldev->lock, flags);
> +                       tre_iterator += TRE_SIZE;
> +                       if (tre_iterator >= tre_ring_size)
> +                               tre_iterator -= tre_ring_size;
> +                       continue;
> +               }
> +               lldev->pending_tre_list[tre_index] = NULL;
> +               lldev->pending_tre_count--;
> +               if (lldev->pending_tre_count < 0) {
> +                       dev_warn(lldev->dev,
> +                               "tre count mismatch on completion");
> +                       lldev->pending_tre_count = 0;
> +               }
> +               spin_unlock_irqrestore(&lldev->lock, flags);
> +
> +               lldev->tx_status_list[tre->chidx].err_info = err_info;
> +               lldev->tx_status_list[tre->chidx].err_code = err_code;
> +               tre->queued = 0;
> +
> +               kfifo_put(&lldev->handoff_fifo, tre);
> +               tasklet_schedule(&lldev->task);
> +
> +               tre_iterator += TRE_SIZE;
> +               if (tre_iterator >= tre_ring_size)
> +                       tre_iterator -= tre_ring_size;
> +
> +               num_completed++;
> +       }
> +       tre_read_off = (lldev->tre_processed_off +
> +                       TRE_SIZE * num_completed);
> +
> +       tre_read_off = tre_read_off % tre_ring_size;
> +
> +       /* record the last processed tre offset */
> +       lldev->tre_processed_off = tre_read_off;
> +}
> +
> +static int hidma_ll_reset(struct hidma_lldev *lldev)
> +{
> +       u32 val;
> +       int ret;
> +
> +       val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
> +       val = val & ~(CH_CONTROL_MASK << 16);
> +       val = val | (CH_RESET << 16);
> +       writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
> +
> +       /*
> +        * Delay 10ms after reset to allow DMA logic to quiesce.
> +        * Do a polled read up to 1ms and 10ms maximum.
> +        */
> +       ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
> +               (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_DISABLED),
> +               1000, 10000);
> +       if (ret) {
> +               dev_err(lldev->dev,
> +                       "transfer channel did not reset\n");
> +               return ret;
> +       }
> +
> +       val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
> +       val = val & ~(CH_CONTROL_MASK << 16);
> +       val = val | (CH_RESET << 16);
> +       writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
> +
> +       /*
> +        * Delay 10ms after reset to allow DMA logic to quiesce.
> +        * Do a polled read up to 1ms and 10ms maximum.
> +        */
> +       ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
> +               (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_DISABLED),
> +               1000, 10000);
> +       if (ret)
> +               return ret;
> +
> +       lldev->trch_state = CH_DISABLED;
> +       lldev->evch_state = CH_DISABLED;
> +       return 0;
> +}
> +
> +static void hidma_ll_enable_irq(struct hidma_lldev *lldev, u32 irq_bits)
> +{
> +       writel(irq_bits, lldev->evca + EVCA_IRQ_EN_OFFSET);
> +       dev_dbg(lldev->dev, "enableirq\n");
> +}
> +
> +/*
> + * The interrupt handler for HIDMA will try to consume as many pending
> + * EVRE from the event queue as possible. Each EVRE has an associated
> + * TRE that holds the user interface parameters. EVRE reports the
> + * result of the transaction. Hardware guarantees ordering between EVREs
> + * and TREs. We use last processed offset to figure out which TRE is
> + * associated with which EVRE. If two TREs are consumed by HW, the EVREs
> + * are in order in the event ring.
> + *
> + * This handler will do a one pass for consuming EVREs. Other EVREs may
> + * be delivered while we are working. It will try to consume incoming
> + * EVREs one more time and return.
> + *
> + * For unprocessed EVREs, hardware will trigger another interrupt until
> + * all the interrupt bits are cleared.
> + *
> + * Hardware guarantees that by the time interrupt is observed, all data
> + * transactions in flight are delivered to their respective places and
> + * are visible to the CPU.
> + *
> + * On demand paging for IOMMU is only supported for PCIe via PRI
> + * (Page Request Interface) not for HIDMA. All other hardware instances
> + * including HIDMA work on pinned DMA addresses.
> + *
> + * HIDMA is not aware of IOMMU presence since it follows the DMA API. All
> + * IOMMU latency will be built into the data movement time. By the time
> + * interrupt happens, IOMMU lookups + data movement has already taken place.
> + *
> + * While the first read in a typical PCI endpoint ISR flushes all outstanding
> + * requests traditionally to the destination, this concept does not apply
> + * here for this HW.
> + */
> +static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev)
> +{
> +       u32 status;
> +       u32 enable;
> +       u32 cause;
> +       int repeat = 2;
> +       unsigned long timeout;
> +
> +       /*
> +        * Fine tuned for this HW...
> +        *
> +        * This ISR has been designed for this particular hardware. Relaxed read
> +        * and write accessors are used for performance reasons due to interrupt
> +        * delivery guarantees. Do not copy this code blindly and expect
> +        * that to work.
> +        */
> +       status = readl_relaxed(lldev->evca + EVCA_IRQ_STAT_OFFSET);
> +       enable = readl_relaxed(lldev->evca + EVCA_IRQ_EN_OFFSET);
> +       cause = status & enable;
> +
> +       if ((cause & (BIT(IRQ_TR_CH_INVALID_TRE_BIT_POS))) ||
> +                       (cause & BIT(IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS)) ||
> +                       (cause & BIT(IRQ_EV_CH_WR_RESP_BIT_POS)) ||
> +                       (cause & BIT(IRQ_TR_CH_DATA_RD_ER_BIT_POS)) ||
> +                       (cause & BIT(IRQ_TR_CH_DATA_WR_ER_BIT_POS))) {
> +               u8 err_code = EVRE_STATUS_ERROR;
> +               u8 err_info = 0xFF;
> +
> +               /* Clear out pending interrupts */
> +               writel(cause, lldev->evca + EVCA_IRQ_CLR_OFFSET);
> +
> +               dev_err(lldev->dev,
> +                       "error 0x%x, resetting...\n", cause);
> +
> +               hidma_cleanup_pending_tre(lldev, err_info, err_code);
> +
> +               /* reset the channel for recovery */
> +               if (hidma_ll_setup(lldev)) {
> +                       dev_err(lldev->dev,
> +                               "channel reinitialize failed after error\n");
> +                       return;
> +               }
> +               hidma_ll_enable_irq(lldev, ENABLE_IRQS);
> +               return;
> +       }
> +
> +       /*
> +        * Try to consume as many EVREs as possible.
> +        * skip this loop if the interrupt is spurious.
> +        */
> +       while (cause && repeat) {
> +               unsigned long start = jiffies;
> +
> +               /* This timeout should be sufficent for core to finish */
> +               timeout = start + msecs_to_jiffies(500);
> +
> +               while (lldev->pending_tre_count) {
> +                       hidma_handle_tre_completion(lldev);
> +                       if (time_is_before_jiffies(timeout)) {
> +                               dev_warn(lldev->dev,
> +                                       "ISR timeout %lx-%lx from %lx [%d]\n",
> +                                       jiffies, timeout, start,
> +                                       lldev->pending_tre_count);
> +                               break;
> +                       }
> +               }
> +
> +               /* We consumed TREs or there are pending TREs or EVREs. */
> +               writel_relaxed(cause, lldev->evca + EVCA_IRQ_CLR_OFFSET);
> +
> +               /*
> +                * Another interrupt might have arrived while we are
> +                * processing this one. Read the new cause.
> +                */
> +               status = readl_relaxed(lldev->evca + EVCA_IRQ_STAT_OFFSET);
> +               enable = readl_relaxed(lldev->evca + EVCA_IRQ_EN_OFFSET);
> +               cause = status & enable;
> +
> +               repeat--;
> +       }
> +}
> +
> +
> +static int hidma_ll_enable(struct hidma_lldev *lldev)
> +{
> +       u32 val;
> +       int ret;
> +
> +       val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
> +       val &= ~(CH_CONTROL_MASK << 16);
> +       val |= (CH_ENABLE << 16);
> +       writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
> +
> +       ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
> +               ((((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_ENABLED) ||
> +               (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_RUNNING)),
> +               1000, 10000);
> +       if (ret) {
> +               dev_err(lldev->dev,
> +                       "event channel did not get enabled\n");
> +               return ret;
> +       }
> +
> +       val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
> +       val = val & ~(CH_CONTROL_MASK << 16);
> +       val = val | (CH_ENABLE << 16);
> +       writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
> +
> +       ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
> +               ((((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_ENABLED) ||
> +               (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_RUNNING)),
> +               1000, 10000);
> +       if (ret) {
> +               dev_err(lldev->dev,
> +                       "transfer channel did not get enabled\n");
> +               return ret;
> +       }
> +
> +       lldev->trch_state = CH_ENABLED;
> +       lldev->evch_state = CH_ENABLED;
> +
> +       return 0;
> +}
> +
> +int hidma_ll_resume(struct hidma_lldev *lldev)
> +{
> +       return hidma_ll_enable(lldev);
> +}
> +
> +static int hidma_ll_hw_start(struct hidma_lldev *lldev)
> +{
> +       int rc = 0;
> +       unsigned long irqflags;
> +
> +       spin_lock_irqsave(&lldev->lock, irqflags);
> +       writel(lldev->tre_write_offset, lldev->trca + TRCA_DOORBELL_OFFSET);
> +       spin_unlock_irqrestore(&lldev->lock, irqflags);
> +
> +       return rc;
> +}
> +
> +bool hidma_ll_isenabled(struct hidma_lldev *lldev)
> +{
> +       u32 val;
> +
> +       val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
> +       lldev->trch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
> +       val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
> +       lldev->evch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
> +
> +       /* both channels have to be enabled before calling this function*/
> +       if (((lldev->trch_state == CH_ENABLED) ||
> +               (lldev->trch_state == CH_RUNNING)) &&
> +               ((lldev->evch_state == CH_ENABLED) ||
> +                       (lldev->evch_state == CH_RUNNING)))
> +               return true;
> +
> +       dev_dbg(lldev->dev, "channels are not enabled or are in error state");
> +       return false;
> +}
> +
> +int hidma_ll_queue_request(struct hidma_lldev *lldev, u32 tre_ch)
> +{
> +       struct hidma_tre *tre;
> +       int rc = 0;
> +       unsigned long flags;
> +
> +       tre = &lldev->trepool[tre_ch];
> +
> +       /* copy the TRE into its location in the TRE ring */
> +       spin_lock_irqsave(&lldev->lock, flags);
> +       tre->tre_index = lldev->tre_write_offset / TRE_SIZE;
> +       lldev->pending_tre_list[tre->tre_index] = tre;
> +       memcpy(lldev->tre_ring + lldev->tre_write_offset, &tre->tre_local[0],
> +               TRE_SIZE);
> +       lldev->tx_status_list[tre->chidx].err_code = 0;
> +       lldev->tx_status_list[tre->chidx].err_info = 0;
> +       tre->queued = 1;
> +       lldev->pending_tre_count++;
> +       lldev->tre_write_offset = (lldev->tre_write_offset + TRE_SIZE)
> +                               % lldev->tre_ring_size;
> +       spin_unlock_irqrestore(&lldev->lock, flags);
> +       return rc;
> +}
> +
> +int hidma_ll_start(struct hidma_lldev *lldev)
> +{
> +       return hidma_ll_hw_start(lldev);
> +}
> +
> +/*
> + * Note that even though we stop this channel
> + * if there is a pending transaction in flight
> + * it will complete and follow the callback.
> + * This request will prevent further requests
> + * to be made.
> + */
> +int hidma_ll_pause(struct hidma_lldev *lldev)
> +{
> +       u32 val;
> +       int ret;
> +
> +       val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
> +       lldev->evch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
> +       val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
> +       lldev->trch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
> +
> +       /* already suspended by this OS */
> +       if ((lldev->trch_state == CH_SUSPENDED) ||
> +               (lldev->evch_state == CH_SUSPENDED))
> +               return 0;
> +
> +       /* already stopped by the manager */
> +       if ((lldev->trch_state == CH_STOPPED) ||
> +               (lldev->evch_state == CH_STOPPED))
> +               return 0;
> +
> +       val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
> +       val = val & ~(CH_CONTROL_MASK << 16);
> +       val = val | (CH_SUSPEND << 16);
> +       writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
> +
> +       /*
> +        * Start the wait right after the suspend is confirmed.
> +        * Do a polled read up to 1ms and 10ms maximum.
> +        */
> +       ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
> +               (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_SUSPENDED),
> +               1000, 10000);
> +       if (ret)
> +               return ret;
> +
> +       val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
> +       val = val & ~(CH_CONTROL_MASK << 16);
> +       val = val | (CH_SUSPEND << 16);
> +       writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
> +
> +       /*
> +        * Start the wait right after the suspend is confirmed
> +        * Delay up to 10ms after reset to allow DMA logic to quiesce.
> +        */
> +       ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
> +               (((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_SUSPENDED),
> +               1000, 10000);
> +       if (ret)
> +               return ret;
> +
> +       lldev->trch_state = CH_SUSPENDED;
> +       lldev->evch_state = CH_SUSPENDED;
> +       dev_dbg(lldev->dev, "stop\n");
> +
> +       return 0;
> +}
> +
> +void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
> +       dma_addr_t src, dma_addr_t dest, u32 len, u32 flags)
> +{
> +       struct hidma_tre *tre;
> +       u32 *tre_local;
> +
> +       if (tre_ch >= lldev->nr_tres) {
> +               dev_err(lldev->dev,
> +                       "invalid TRE number in transfer params:%d", tre_ch);
> +               return;
> +       }
> +
> +       tre = &lldev->trepool[tre_ch];
> +       if (atomic_read(&tre->allocated) != true) {
> +               dev_err(lldev->dev,
> +                       "trying to set params on an unused TRE:%d", tre_ch);
> +               return;
> +       }
> +
> +       tre_local = &tre->tre_local[0];
> +       tre_local[TRE_LEN_IDX] = len;
> +       tre_local[TRE_SRC_LOW_IDX] = lower_32_bits(src);
> +       tre_local[TRE_SRC_HI_IDX] = upper_32_bits(src);
> +       tre_local[TRE_DEST_LOW_IDX] = lower_32_bits(dest);
> +       tre_local[TRE_DEST_HI_IDX] = upper_32_bits(dest);
> +       tre->int_flags = flags;
> +
> +       dev_dbg(lldev->dev, "transferparams: tre_ch:%d %pap->%pap len:%u\n",
> +               tre_ch, &src, &dest, len);
> +}
> +
> +/*
> + * Called during initialization and after an error condition
> + * to restore hardware state.
> + */
> +int hidma_ll_setup(struct hidma_lldev *lldev)
> +{
> +       int rc;
> +       u64 addr;
> +       u32 val;
> +       u32 nr_tres = lldev->nr_tres;
> +
> +       lldev->pending_tre_count = 0;
> +       lldev->tre_processed_off = 0;
> +       lldev->evre_processed_off = 0;
> +       lldev->tre_write_offset = 0;
> +
> +       /* disable interrupts */
> +       hidma_ll_enable_irq(lldev, 0);
> +
> +       /* clear all pending interrupts */
> +       val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
> +       writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
> +
> +       rc = hidma_ll_reset(lldev);
> +       if (rc)
> +               return rc;
> +
> +       /*
> +        * Clear all pending interrupts again.
> +        * Otherwise, we observe reset complete interrupts.
> +        */
> +       val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
> +       writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
> +
> +       /* disable interrupts again after reset */
> +       hidma_ll_enable_irq(lldev, 0);
> +
> +       addr = lldev->tre_ring_handle;
> +       writel(lower_32_bits(addr), lldev->trca + TRCA_RING_LOW_OFFSET);
> +       writel(upper_32_bits(addr), lldev->trca + TRCA_RING_HIGH_OFFSET);
> +       writel(lldev->tre_ring_size, lldev->trca + TRCA_RING_LEN_OFFSET);
> +
> +       addr = lldev->evre_ring_handle;
> +       writel(lower_32_bits(addr), lldev->evca + EVCA_RING_LOW_OFFSET);
> +       writel(upper_32_bits(addr), lldev->evca + EVCA_RING_HIGH_OFFSET);
> +       writel(EVRE_SIZE * nr_tres, lldev->evca + EVCA_RING_LEN_OFFSET);
> +
> +       /* support IRQ only for now */
> +       val = readl(lldev->evca + EVCA_INTCTRL_OFFSET);
> +       val = val & ~(0xF);
> +       val = val | 0x1;
> +       writel(val, lldev->evca + EVCA_INTCTRL_OFFSET);
> +
> +       /* clear all pending interrupts and enable them*/
> +       writel(ENABLE_IRQS, lldev->evca + EVCA_IRQ_CLR_OFFSET);
> +       hidma_ll_enable_irq(lldev, ENABLE_IRQS);
> +
> +       rc = hidma_ll_enable(lldev);
> +       if (rc)
> +               return rc;
> +
> +       return rc;
> +}
> +
> +struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
> +                       void __iomem *trca, void __iomem *evca,
> +                       u8 evridx)
> +{
> +       u32 required_bytes;
> +       struct hidma_lldev *lldev;
> +       int rc;
> +
> +       if (!trca || !evca || !dev || !nr_tres)
> +               return NULL;
> +
> +       /* need at least four TREs */
> +       if (nr_tres < 4)
> +               return NULL;
> +
> +       /* need an extra space */
> +       nr_tres += 1;
> +
> +       lldev = devm_kzalloc(dev, sizeof(struct hidma_lldev), GFP_KERNEL);
> +       if (!lldev)
> +               return NULL;
> +
> +       lldev->evca = evca;
> +       lldev->trca = trca;
> +       lldev->dev = dev;
> +       required_bytes = sizeof(struct hidma_tre) * nr_tres;
> +       lldev->trepool = devm_kzalloc(lldev->dev, required_bytes, GFP_KERNEL);
> +       if (!lldev->trepool)
> +               return NULL;
> +
> +       required_bytes = sizeof(lldev->pending_tre_list[0]) * nr_tres;
> +       lldev->pending_tre_list = devm_kzalloc(dev, required_bytes,
> +                                       GFP_KERNEL);
> +       if (!lldev->pending_tre_list)
> +               return NULL;
> +
> +       required_bytes = sizeof(lldev->tx_status_list[0]) * nr_tres;
> +       lldev->tx_status_list = devm_kzalloc(dev, required_bytes, GFP_KERNEL);
> +       if (!lldev->tx_status_list)
> +               return NULL;
> +
> +       lldev->tre_ring = dmam_alloc_coherent(dev, (TRE_SIZE + 1) * nr_tres,
> +                                       &lldev->tre_ring_handle, GFP_KERNEL);
> +       if (!lldev->tre_ring)
> +               return NULL;
> +
> +       memset(lldev->tre_ring, 0, (TRE_SIZE + 1) * nr_tres);
> +       lldev->tre_ring_size = TRE_SIZE * nr_tres;
> +       lldev->nr_tres = nr_tres;
> +
> +       /* the TRE ring has to be TRE_SIZE aligned */
> +       if (!IS_ALIGNED(lldev->tre_ring_handle, TRE_SIZE)) {
> +               u8  tre_ring_shift;
> +
> +               tre_ring_shift = lldev->tre_ring_handle % TRE_SIZE;
> +               tre_ring_shift = TRE_SIZE - tre_ring_shift;
> +               lldev->tre_ring_handle += tre_ring_shift;
> +               lldev->tre_ring += tre_ring_shift;
> +       }
> +
> +       lldev->evre_ring = dmam_alloc_coherent(dev, (EVRE_SIZE + 1) * nr_tres,
> +                                       &lldev->evre_ring_handle, GFP_KERNEL);
> +       if (!lldev->evre_ring)
> +               return NULL;
> +
> +       memset(lldev->evre_ring, 0, (EVRE_SIZE + 1) * nr_tres);
> +       lldev->evre_ring_size = EVRE_SIZE * nr_tres;
> +
> +       /* the EVRE ring has to be EVRE_SIZE aligned */
> +       if (!IS_ALIGNED(lldev->evre_ring_handle, EVRE_SIZE)) {
> +               u8  evre_ring_shift;
> +
> +               evre_ring_shift = lldev->evre_ring_handle % EVRE_SIZE;
> +               evre_ring_shift = EVRE_SIZE - evre_ring_shift;
> +               lldev->evre_ring_handle += evre_ring_shift;
> +               lldev->evre_ring += evre_ring_shift;
> +       }
> +       lldev->nr_tres = nr_tres;
> +       lldev->evridx = evridx;
> +
> +       rc = kfifo_alloc(&lldev->handoff_fifo,
> +               nr_tres * sizeof(struct hidma_tre *), GFP_KERNEL);
> +       if (rc)
> +               return NULL;
> +
> +       rc = hidma_ll_setup(lldev);
> +       if (rc)
> +               return NULL;
> +
> +       spin_lock_init(&lldev->lock);
> +       tasklet_init(&lldev->task, hidma_ll_tre_complete,
> +                       (unsigned long)lldev);
> +       lldev->initialized = 1;
> +       hidma_ll_enable_irq(lldev, ENABLE_IRQS);
> +       return lldev;
> +}
> +
> +int hidma_ll_uninit(struct hidma_lldev *lldev)
> +{
> +       int rc = 0;
> +       u32 val;
> +
> +       if (!lldev)
> +               return -ENODEV;
> +
> +       if (lldev->initialized) {
> +               u32 required_bytes;
> +
> +               lldev->initialized = 0;
> +
> +               required_bytes = sizeof(struct hidma_tre) * lldev->nr_tres;
> +               tasklet_kill(&lldev->task);
> +               memset(lldev->trepool, 0, required_bytes);
> +               lldev->trepool = NULL;
> +               lldev->pending_tre_count = 0;
> +               lldev->tre_write_offset = 0;
> +
> +               rc = hidma_ll_reset(lldev);
> +
> +               /*
> +                * Clear all pending interrupts again.
> +                * Otherwise, we observe reset complete interrupts.
> +                */
> +               val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
> +               writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
> +               hidma_ll_enable_irq(lldev, 0);
> +       }
> +       return rc;
> +}
> +
> +irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
> +{
> +       struct hidma_lldev *lldev = arg;
> +
> +       hidma_ll_int_handler_internal(lldev);
> +       return IRQ_HANDLED;
> +}
> +
> +enum dma_status hidma_ll_status(struct hidma_lldev *lldev, u32 tre_ch)
> +{
> +       enum dma_status ret = DMA_ERROR;
> +       unsigned long flags;
> +       u8 err_code;
> +
> +       spin_lock_irqsave(&lldev->lock, flags);
> +       err_code = lldev->tx_status_list[tre_ch].err_code;
> +
> +       if (err_code & EVRE_STATUS_COMPLETE)
> +               ret = DMA_COMPLETE;
> +       else if (err_code & EVRE_STATUS_ERROR)
> +               ret = DMA_ERROR;
> +       else
> +               ret = DMA_IN_PROGRESS;
> +       spin_unlock_irqrestore(&lldev->lock, flags);
> +
> +       return ret;
> +}
> --
> Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
Sinan Kaya Nov. 8, 2015, 9:51 p.m. UTC | #3
On 11/8/2015 3:47 PM, Andy Shevchenko wrote:
>> +       trca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> >+       if (!trca_resource) {
>> >+               rc = -ENODEV;
>> >+               goto bailout;
>> >+       }
> Why did you ignore my comment about this block?
> Remove that condition entirely.
>
>> >+
>> >+       trca = devm_ioremap_resource(&pdev->dev, trca_resource);
>> >+       if (IS_ERR(trca)) {
>> >+               rc = -ENOMEM;
>> >+               goto bailout;
>> >+       }

Sorry, I didn't quite get your comment. I thought you wanted to see 
platform_get_resource and devm_ioremap_resource together.

Which one do you want me to remove?
Andy Shevchenko Nov. 8, 2015, 10 p.m. UTC | #4
On Sun, Nov 8, 2015 at 11:51 PM, Sinan Kaya <okaya@codeaurora.org> wrote:
>
>
> On 11/8/2015 3:47 PM, Andy Shevchenko wrote:
>>>
>>> +       trca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> >+       if (!trca_resource) {
>>> >+               rc = -ENODEV;
>>> >+               goto bailout;
>>> >+       }
>>
>> Why did you ignore my comment about this block?
>> Remove that condition entirely.
>>
>>> >+
>>> >+       trca = devm_ioremap_resource(&pdev->dev, trca_resource);
>>> >+       if (IS_ERR(trca)) {
>>> >+               rc = -ENOMEM;
>>> >+               goto bailout;
>>> >+       }
>
>
> Sorry, I didn't quite get your comment. I thought you wanted to see
> platform_get_resource and devm_ioremap_resource together.
>
> Which one do you want me to remove?

At the end you would have something like

res = platform_get_resource();
addr = devm_ioremap_resources();
if (!addr) {
…
}
Sinan Kaya Nov. 9, 2015, 12:31 a.m. UTC | #5
On 11/8/2015 3:47 PM, Andy Shevchenko wrote:
> On Sun, Nov 8, 2015 at 6:53 AM, Sinan Kaya <okaya@codeaurora.org> wrote:
>> This patch adds support for hidma engine. The driver
>> consists of two logical blocks. The DMA engine interface
>> and the low-level interface. The hardware only supports
>> memcpy/memset and this driver only support memcpy
>> interface. HW and driver doesn't support slave interface.
>
> Make lines a bit longer.
>

OK

>> +       pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
>> +       pm_runtime_use_autosuspend(&pdev->dev);
>> +       pm_runtime_set_active(&pdev->dev);
>> +       pm_runtime_enable(&pdev->dev);
>> +
>> +       trca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>
>> +       if (!trca_resource) {
>> +               rc = -ENODEV;
>> +               goto bailout;
>> +       }
>
> Why did you ignore my comment about this block?
> Remove that condition entirely.
>
Removed these four lines above.

>> +
>> +       trca = devm_ioremap_resource(&pdev->dev, trca_resource);
>> +       if (IS_ERR(trca)) {
>> +               rc = -ENOMEM;
>> +               goto bailout;
>> +       }
>> +
>> +       evca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
>> +       if (!evca_resource) {
>> +               rc = -ENODEV;
>> +               goto bailout;
>> +       }
>
> Ditto.
>

done


>> +uninit:
>> +       hidma_debug_uninit(dmadev);
>> +       hidma_ll_uninit(dmadev->lldev);
>> +dmafree:
>> +       if (dmadev)
>> +               hidma_free(dmadev);
>> +bailout:
>> +       pm_runtime_disable(&pdev->dev);
>> +       pm_runtime_put_sync_suspend(&pdev->dev);
>
> Are you sure this is appropriate sequence?
>
> I think
>
> pm_runtime_put();
> pm_runtime_disable();
>
corrected, reordered and used pm_runtime_put_sync() instead.

> will do the job.
>
>> +       return rc;
>> +}
>> +
>> +static int hidma_remove(struct platform_device *pdev)
>> +{
>> +       struct hidma_dev *dmadev = platform_get_drvdata(pdev);
>> +
>> +       dev_dbg(&pdev->dev, "removing\n");
>
> Useless message.
>
Removed.

>> +       pm_runtime_get_sync(dmadev->ddev.dev);
>> +
>> +       dma_async_device_unregister(&dmadev->ddev);
>> +       hidma_debug_uninit(dmadev);
>> +       hidma_ll_uninit(dmadev->lldev);
>> +       hidma_free(dmadev);
>> +
>> +       dev_info(&pdev->dev, "HI-DMA engine removed\n");
>> +       pm_runtime_put_sync_suspend(&pdev->dev);
>> +       pm_runtime_disable(&pdev->dev);
>> +
>> +       return 0;
>> +}
Sinan Kaya Nov. 9, 2015, 12:43 a.m. UTC | #6
On 11/8/2015 2:13 PM, kbuild test robot wrote:
> Hi Sinan,
>
> [auto build test WARNING on: robh/for-next]
> [also build test WARNING on: v4.3 next-20151106]
>
> url:    https://github.com/0day-ci/linux/commits/Sinan-Kaya/ma-add-Qualcomm-Technologies-HIDMA-driver/20151108-125824
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux for-next
> config: mn10300-allyesconfig (attached as .config)
> reproduce:
>          wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
>          chmod +x ~/bin/make.cross
>          # save the attached .config to linux build tree
>          make.cross ARCH=mn10300
>
> All warnings (new ones prefixed by >>):
>
>     In file included from include/linux/printk.h:277:0,
>                      from include/linux/kernel.h:13,
>                      from include/linux/list.h:8,
>                      from include/linux/kobject.h:20,
>                      from include/linux/device.h:17,
>                      from include/linux/dmaengine.h:20,
>                      from drivers/dma/qcom/hidma.c:45:
>     drivers/dma/qcom/hidma.c: In function 'hidma_prep_dma_memcpy':
>     include/linux/dynamic_debug.h:64:16: warning: format '%zu' expects argument of type 'size_t', but argument 7 has type 'unsigned int' [-Wformat=]
>       static struct _ddebug  __aligned(8)   \
>                     ^
>     include/linux/dynamic_debug.h:84:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA'
>       DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
>       ^
>     include/linux/device.h:1171:2: note: in expansion of macro 'dynamic_dev_dbg'
>       dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
>       ^
>>> drivers/dma/qcom/hidma.c:391:2: note: in expansion of macro 'dev_dbg'
>       dev_dbg(mdma->ddev.dev,
>       ^
>
> vim +/dev_dbg +391 drivers/dma/qcom/hidma.c
>
>     375	
>     376		mchan->allocated = 0;
>     377		spin_unlock_irqrestore(&mchan->lock, irqflags);
>     378		dev_dbg(mdma->ddev.dev, "freed channel for %u\n", mchan->dma_sig);
>     379	}
>     380	
>     381	
>     382	static struct dma_async_tx_descriptor *
>     383	hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dma_dest,
>     384				dma_addr_t dma_src, size_t len, unsigned long flags)
>     385	{
>     386		struct hidma_chan *mchan = to_hidma_chan(dmach);
>     387		struct hidma_desc *mdesc = NULL;
>     388		struct hidma_dev *mdma = mchan->dmadev;
>     389		unsigned long irqflags;
>     390	
>   > 391		dev_dbg(mdma->ddev.dev,
>     392			"memcpy: chan:%p dest:%pad src:%pad len:%zu\n", mchan,
>     393			&dma_dest, &dma_src, len);
>     394	

What am I missing?

len is size_t. This page says use %zu for size_t.

https://www.kernel.org/doc/Documentation/printk-formats.txt



>     395		/* Get free descriptor */
>     396		spin_lock_irqsave(&mchan->lock, irqflags);
>     397		if (!list_empty(&mchan->free)) {
>     398			mdesc = list_first_entry(&mchan->free, struct hidma_desc,
>     399						node);
>
> ---
> 0-DAY kernel test infrastructure                Open Source Technology Center
> https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
>
Rob Herring (Arm) Nov. 9, 2015, 6:19 p.m. UTC | #7
On Sat, Nov 07, 2015 at 11:53:00PM -0500, Sinan Kaya wrote:
> This patch adds support for hidma engine. The driver
> consists of two logical blocks. The DMA engine interface
> and the low-level interface. The hardware only supports
> memcpy/memset and this driver only support memcpy
> interface. HW and driver doesn't support slave interface.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
>  .../devicetree/bindings/dma/qcom_hidma.txt         |  18 +
>  drivers/dma/qcom/Kconfig                           |   9 +
>  drivers/dma/qcom/Makefile                          |   2 +
>  drivers/dma/qcom/hidma.c                           | 743 ++++++++++++++++
>  drivers/dma/qcom/hidma.h                           | 157 ++++
>  drivers/dma/qcom/hidma_dbg.c                       | 225 +++++
>  drivers/dma/qcom/hidma_ll.c                        | 944 +++++++++++++++++++++
>  7 files changed, 2098 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma.txt
>  create mode 100644 drivers/dma/qcom/hidma.c
>  create mode 100644 drivers/dma/qcom/hidma.h
>  create mode 100644 drivers/dma/qcom/hidma_dbg.c
>  create mode 100644 drivers/dma/qcom/hidma_ll.c
> 
> diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma.txt b/Documentation/devicetree/bindings/dma/qcom_hidma.txt
> new file mode 100644
> index 0000000..c9fb2d44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/qcom_hidma.txt
> @@ -0,0 +1,18 @@
> +Qualcomm Technologies HIDMA Channel driver
> +
> +Required properties:
> +- compatible: must contain "qcom,hidma"

This should be "qcom,hidma-1.0" to match the example and driver. I 
would drop "qcom,hidma" altogether.

Rob
Sinan Kaya Nov. 10, 2015, 4:44 a.m. UTC | #8
On 11/9/2015 1:19 PM, Rob Herring wrote:
> On Sat, Nov 07, 2015 at 11:53:00PM -0500, Sinan Kaya wrote:
>> This patch adds support for hidma engine. The driver
>> consists of two logical blocks. The DMA engine interface
>> and the low-level interface. The hardware only supports
>> memcpy/memset and this driver only support memcpy
>> interface. HW and driver doesn't support slave interface.
>>
>> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
>> ---
>>   .../devicetree/bindings/dma/qcom_hidma.txt         |  18 +
>>   drivers/dma/qcom/Kconfig                           |   9 +
>>   drivers/dma/qcom/Makefile                          |   2 +
>>   drivers/dma/qcom/hidma.c                           | 743 ++++++++++++++++
>>   drivers/dma/qcom/hidma.h                           | 157 ++++
>>   drivers/dma/qcom/hidma_dbg.c                       | 225 +++++
>>   drivers/dma/qcom/hidma_ll.c                        | 944 +++++++++++++++++++++
>>   7 files changed, 2098 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/dma/qcom_hidma.txt
>>   create mode 100644 drivers/dma/qcom/hidma.c
>>   create mode 100644 drivers/dma/qcom/hidma.h
>>   create mode 100644 drivers/dma/qcom/hidma_dbg.c
>>   create mode 100644 drivers/dma/qcom/hidma_ll.c
>>
>> diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma.txt b/Documentation/devicetree/bindings/dma/qcom_hidma.txt
>> new file mode 100644
>> index 0000000..c9fb2d44
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/dma/qcom_hidma.txt
>> @@ -0,0 +1,18 @@
>> +Qualcomm Technologies HIDMA Channel driver
>> +
>> +Required properties:
>> +- compatible: must contain "qcom,hidma"
>
> This should be "qcom,hidma-1.0" to match the example and driver. I
> would drop "qcom,hidma" altogether.

I matched it.

>
> Rob
>
kernel test robot Nov. 11, 2015, 2:21 a.m. UTC | #9
Hi Sinan,

Sorry please ignore this warning -- it's actually a problem specific
to the mn10300 arch. I'll disable such warning in mn10300 in future.

Thanks,
Fengguang

On Sun, Nov 08, 2015 at 07:43:52PM -0500, Sinan Kaya wrote:
> 
> 
> On 11/8/2015 2:13 PM, kbuild test robot wrote:
> >Hi Sinan,
> >
> >[auto build test WARNING on: robh/for-next]
> >[also build test WARNING on: v4.3 next-20151106]
> >
> >url:    https://github.com/0day-ci/linux/commits/Sinan-Kaya/ma-add-Qualcomm-Technologies-HIDMA-driver/20151108-125824
> >base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux for-next
> >config: mn10300-allyesconfig (attached as .config)
> >reproduce:
> >         wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
> >         chmod +x ~/bin/make.cross
> >         # save the attached .config to linux build tree
> >         make.cross ARCH=mn10300
> >
> >All warnings (new ones prefixed by >>):
> >
> >    In file included from include/linux/printk.h:277:0,
> >                     from include/linux/kernel.h:13,
> >                     from include/linux/list.h:8,
> >                     from include/linux/kobject.h:20,
> >                     from include/linux/device.h:17,
> >                     from include/linux/dmaengine.h:20,
> >                     from drivers/dma/qcom/hidma.c:45:
> >    drivers/dma/qcom/hidma.c: In function 'hidma_prep_dma_memcpy':
> >    include/linux/dynamic_debug.h:64:16: warning: format '%zu' expects argument of type 'size_t', but argument 7 has type 'unsigned int' [-Wformat=]
> >      static struct _ddebug  __aligned(8)   \
> >                    ^
> >    include/linux/dynamic_debug.h:84:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA'
> >      DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt);  \
> >      ^
> >    include/linux/device.h:1171:2: note: in expansion of macro 'dynamic_dev_dbg'
> >      dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
> >      ^
> >>>drivers/dma/qcom/hidma.c:391:2: note: in expansion of macro 'dev_dbg'
> >      dev_dbg(mdma->ddev.dev,
> >      ^
> >
> >vim +/dev_dbg +391 drivers/dma/qcom/hidma.c
> >
> >    375	
> >    376		mchan->allocated = 0;
> >    377		spin_unlock_irqrestore(&mchan->lock, irqflags);
> >    378		dev_dbg(mdma->ddev.dev, "freed channel for %u\n", mchan->dma_sig);
> >    379	}
> >    380	
> >    381	
> >    382	static struct dma_async_tx_descriptor *
> >    383	hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dma_dest,
> >    384				dma_addr_t dma_src, size_t len, unsigned long flags)
> >    385	{
> >    386		struct hidma_chan *mchan = to_hidma_chan(dmach);
> >    387		struct hidma_desc *mdesc = NULL;
> >    388		struct hidma_dev *mdma = mchan->dmadev;
> >    389		unsigned long irqflags;
> >    390	
> >  > 391		dev_dbg(mdma->ddev.dev,
> >    392			"memcpy: chan:%p dest:%pad src:%pad len:%zu\n", mchan,
> >    393			&dma_dest, &dma_src, len);
> >    394	
> 
> What am I missing?
> 
> len is size_t. This page says use %zu for size_t.
> 
> https://www.kernel.org/doc/Documentation/printk-formats.txt
> 
> 
> 
> >    395		/* Get free descriptor */
> >    396		spin_lock_irqsave(&mchan->lock, irqflags);
> >    397		if (!list_empty(&mchan->free)) {
> >    398			mdesc = list_first_entry(&mchan->free, struct hidma_desc,
> >    399						node);
> >
> >---
> >0-DAY kernel test infrastructure                Open Source Technology Center
> >https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
> >
> 
> 
> 
> -- 
> Sinan Kaya
> Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux
> Foundation Collaborative Project
> _______________________________________________
> kbuild-all mailing list
> kbuild-all@lists.01.org
> https://lists.01.org/mailman/listinfo/kbuild-all
Arnd Bergmann Nov. 11, 2015, 8:42 a.m. UTC | #10
On Wednesday 11 November 2015 10:21:03 Fengguang Wu wrote:
> Hi Sinan,
> 
> Sorry please ignore this warning -- it's actually a problem specific
> to the mn10300 arch. I'll disable such warning in mn10300 in future.

I just tried to find what happened here. mn10300 appears to define
the type based on the gcc version:

#if __GNUC__ == 4
typedef unsigned int    __kernel_size_t;
typedef signed int      __kernel_ssize_t;
#else
typedef unsigned long   __kernel_size_t;
typedef signed long     __kernel_ssize_t;
#endif

while gcc defines it based on whether you are using a Linux targetted
gcc or a bare-metal one:

gcc/config/mn10300/linux.h:#undef SIZE_TYPE
gcc/config/mn10300/mn10300.h:#undef  SIZE_TYPE
gcc/config/mn10300/mn10300.h:#define SIZE_TYPE "unsigned int"

I can think of two reasons why it went wrong here:

a) You are using gcc-5.x, and the check in the kernel should be ">="
   rather than "==". We should probably fix that regardless

b) You are using a bare-metal gcc rather than a Linux version.

I couldn't find an mn10300 gcc on kernel.org, which one do you use?

	Arnd
kernel test robot Nov. 12, 2015, 8:20 a.m. UTC | #11
Hi Arnd,

On Wed, Nov 11, 2015 at 09:42:00AM +0100, Arnd Bergmann wrote:
> On Wednesday 11 November 2015 10:21:03 Fengguang Wu wrote:
> > Hi Sinan,
> > 
> > Sorry please ignore this warning -- it's actually a problem specific
> > to the mn10300 arch. I'll disable such warning in mn10300 in future.
> 
> I just tried to find what happened here. mn10300 appears to define
> the type based on the gcc version:
> 
> #if __GNUC__ == 4
> typedef unsigned int    __kernel_size_t;
> typedef signed int      __kernel_ssize_t;
> #else
> typedef unsigned long   __kernel_size_t;
> typedef signed long     __kernel_ssize_t;
> #endif
> 
> while gcc defines it based on whether you are using a Linux targetted
> gcc or a bare-metal one:
> 
> gcc/config/mn10300/linux.h:#undef SIZE_TYPE
> gcc/config/mn10300/mn10300.h:#undef  SIZE_TYPE
> gcc/config/mn10300/mn10300.h:#define SIZE_TYPE "unsigned int"
> 
> I can think of two reasons why it went wrong here:
> 
> a) You are using gcc-5.x, and the check in the kernel should be ">="
>    rather than "==". We should probably fix that regardless
> 
> b) You are using a bare-metal gcc rather than a Linux version.

> I couldn't find an mn10300 gcc on kernel.org, which one do you use?

I used this mn10300 compiler:

https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/x86_64-gcc-4.9.0-nolibc_am33_2.0-linux.tar.xz

Thanks,
Fengguang
Arnd Bergmann Nov. 12, 2015, 1:49 p.m. UTC | #12
On Thursday 12 November 2015 16:20:15 Fengguang Wu wrote:
> Hi Arnd,
> 
> On Wed, Nov 11, 2015 at 09:42:00AM +0100, Arnd Bergmann wrote:
> > On Wednesday 11 November 2015 10:21:03 Fengguang Wu wrote:
> > > Hi Sinan,
> > > 
> > > Sorry please ignore this warning -- it's actually a problem specific
> > > to the mn10300 arch. I'll disable such warning in mn10300 in future.
> > 
> > I just tried to find what happened here. mn10300 appears to define
> > the type based on the gcc version:
> > 
> > #if __GNUC__ == 4
> > typedef unsigned int    __kernel_size_t;
> > typedef signed int      __kernel_ssize_t;
> > #else
> > typedef unsigned long   __kernel_size_t;
> > typedef signed long     __kernel_ssize_t;
> > #endif
> > 
> > while gcc defines it based on whether you are using a Linux targetted
> > gcc or a bare-metal one:
> > 
> > gcc/config/mn10300/linux.h:#undef SIZE_TYPE
> > gcc/config/mn10300/mn10300.h:#undef  SIZE_TYPE
> > gcc/config/mn10300/mn10300.h:#define SIZE_TYPE "unsigned int"
> > 
> > I can think of two reasons why it went wrong here:
> > 
> > a) You are using gcc-5.x, and the check in the kernel should be ">="
> >    rather than "==". We should probably fix that regardless
> > 
> > b) You are using a bare-metal gcc rather than a Linux version.
> 
> > I couldn't find an mn10300 gcc on kernel.org, which one do you use?
> 
> I used this mn10300 compiler:
> 
> https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/x86_64-gcc-4.9.0-nolibc_am33_2.0-linux.tar.xz

Ok, so this is not gcc-5.x (i.e. we are not hitting the first problem), but it uses
this definition:

./lib/gcc/am33_2.0-linux/4.9.0/include/stddef.h:#define __SIZE_TYPE__ long unsigned int

which does not match what the kernel expects. I see I have the same thing in
my locally built am33_2.0-linux-gcc-4.9.3.

I have just tried this again with a newly built am33_2.0-linux-gcc-5.2.1, and that
indeed avoids almost all warnings for the mn10300 kernel. I suspect this is
really a combination of two bugs that cancel each other out, but if you do the
same update on your system, you will get the results you want and will no longer
see the bogus warning.

	Arnd
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/dma/qcom_hidma.txt b/Documentation/devicetree/bindings/dma/qcom_hidma.txt
new file mode 100644
index 0000000..c9fb2d44
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_hidma.txt
@@ -0,0 +1,18 @@ 
+Qualcomm Technologies HIDMA Channel driver
+
+Required properties:
+- compatible: must contain "qcom,hidma"
+- reg: Addresses for the transfer and event channel
+- interrupts: Should contain the event interrupt
+- desc-count: Number of asynchronous requests this channel can handle
+- event-channel: The HW event channel completions will be delivered.
+Example:
+
+	hidma_24: dma-controller@0x5c050000 {
+		compatible = "qcom,hidma-1.0";
+		reg = <0 0x5c050000 0x0 0x1000>,
+		      <0 0x5c0b0000 0x0 0x1000>;
+		interrupts = <0 389 0>;
+		desc-count = <10>;
+		event-channel = <4>;
+	};
diff --git a/drivers/dma/qcom/Kconfig b/drivers/dma/qcom/Kconfig
index f3e2d4c..5588e1c 100644
--- a/drivers/dma/qcom/Kconfig
+++ b/drivers/dma/qcom/Kconfig
@@ -18,3 +18,12 @@  config QCOM_HIDMA_MGMT
 	  the guest OS would run QCOM_HIDMA channel driver and the
 	  hypervisor would run the QCOM_HIDMA_MGMT management driver.
 
+config QCOM_HIDMA
+	tristate "Qualcomm Technologies HIDMA Channel support"
+	select DMA_ENGINE
+	help
+	  Enable support for the Qualcomm Technologies HIDMA controller.
+	  The HIDMA controller supports optimized buffer copies
+	  (user to kernel, kernel to kernel, etc.).  It only supports
+	  memcpy interface. The core is not intended for general
+	  purpose slave DMA.
diff --git a/drivers/dma/qcom/Makefile b/drivers/dma/qcom/Makefile
index 1a5a96d..2b68c9c 100644
--- a/drivers/dma/qcom/Makefile
+++ b/drivers/dma/qcom/Makefile
@@ -1,2 +1,4 @@ 
 obj-$(CONFIG_QCOM_BAM_DMA) += bam_dma.o
 obj-$(CONFIG_QCOM_HIDMA_MGMT) += hidma_mgmt.o hidma_mgmt_sys.o
+obj-$(CONFIG_QCOM_HIDMA) +=  hdma.o
+hdma-objs        := hidma_ll.o hidma.o hidma_dbg.o ../dmaselftest.o
diff --git a/drivers/dma/qcom/hidma.c b/drivers/dma/qcom/hidma.c
new file mode 100644
index 0000000..dadc289
--- /dev/null
+++ b/drivers/dma/qcom/hidma.c
@@ -0,0 +1,743 @@ 
+/*
+ * Qualcomm Technologies HIDMA DMA engine interface
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * Copyright (C) Freescale Semicondutor, Inc. 2007, 2008.
+ * Copyright (C) Semihalf 2009
+ * Copyright (C) Ilya Yanok, Emcraft Systems 2010
+ * Copyright (C) Alexander Popov, Promcontroller 2014
+ *
+ * Written by Piotr Ziecik <kosmo@semihalf.com>. Hardware description
+ * (defines, structures and comments) was taken from MPC5121 DMA driver
+ * written by Hongjun Chen <hong-jun.chen@freescale.com>.
+ *
+ * Approved as OSADL project by a majority of OSADL members and funded
+ * by OSADL membership fees in 2009;  for details see www.osadl.org.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+
+/* Linux Foundation elects GPLv2 license only. */
+
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/of_dma.h>
+#include <linux/property.h>
+#include <linux/delay.h>
+#include <linux/highmem.h>
+#include <linux/io.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/acpi.h>
+#include <linux/irq.h>
+#include <linux/atomic.h>
+#include <linux/pm_runtime.h>
+
+#include "../dmaengine.h"
+#include "hidma.h"
+
+/*
+ * Default idle time is 2 seconds. This parameter can
+ * be overridden by changing the following
+ * /sys/bus/platform/devices/QCOM8061:<xy>/power/autosuspend_delay_ms
+ * during kernel boot.
+ */
+#define AUTOSUSPEND_TIMEOUT		2000
+#define ERR_INFO_SW			0xFF
+#define ERR_CODE_UNEXPECTED_TERMINATE	0x0
+
+static inline
+struct hidma_dev *to_hidma_dev(struct dma_device *dmadev)
+{
+	return container_of(dmadev, struct hidma_dev, ddev);
+}
+
+static inline
+struct hidma_dev *to_hidma_dev_from_lldev(struct hidma_lldev **_lldevp)
+{
+	return container_of(_lldevp, struct hidma_dev, lldev);
+}
+
+static inline
+struct hidma_chan *to_hidma_chan(struct dma_chan *dmach)
+{
+	return container_of(dmach, struct hidma_chan, chan);
+}
+
+static inline struct hidma_desc *
+to_hidma_desc(struct dma_async_tx_descriptor *t)
+{
+	return container_of(t, struct hidma_desc, desc);
+}
+
+static void hidma_free(struct hidma_dev *dmadev)
+{
+	dev_dbg(dmadev->ddev.dev, "free dmadev\n");
+	INIT_LIST_HEAD(&dmadev->ddev.channels);
+}
+
+static unsigned int nr_desc_prm;
+module_param(nr_desc_prm, uint, 0644);
+MODULE_PARM_DESC(nr_desc_prm,
+		 "number of descriptors (default: 0)");
+
+#define MAX_HIDMA_CHANNELS	64
+static int event_channel_idx[MAX_HIDMA_CHANNELS] = {
+	[0 ... (MAX_HIDMA_CHANNELS - 1)] = -1};
+static unsigned int num_event_channel_idx;
+module_param_array_named(event_channel_idx, event_channel_idx, int,
+			&num_event_channel_idx, 0644);
+MODULE_PARM_DESC(event_channel_idx,
+		"event channel index array for the notifications");
+static atomic_t channel_ref_count;
+
+/* process completed descriptors */
+static void hidma_process_completed(struct hidma_dev *mdma)
+{
+	dma_cookie_t last_cookie = 0;
+	struct hidma_chan *mchan;
+	struct hidma_desc *mdesc;
+	struct dma_async_tx_descriptor *desc;
+	unsigned long irqflags;
+	struct list_head list;
+	struct dma_chan *dmach = NULL;
+
+	list_for_each_entry(dmach, &mdma->ddev.channels,
+			device_node) {
+		mchan = to_hidma_chan(dmach);
+		INIT_LIST_HEAD(&list);
+
+		/* Get all completed descriptors */
+		spin_lock_irqsave(&mchan->lock, irqflags);
+		list_splice_tail_init(&mchan->completed, &list);
+		spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+		/* Execute callbacks and run dependencies */
+		list_for_each_entry(mdesc, &list, node) {
+			desc = &mdesc->desc;
+
+			spin_lock_irqsave(&mchan->lock, irqflags);
+			dma_cookie_complete(desc);
+			spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+			if (desc->callback &&
+				(hidma_ll_status(mdma->lldev, mdesc->tre_ch)
+				== DMA_COMPLETE))
+				desc->callback(desc->callback_param);
+
+			last_cookie = desc->cookie;
+			dma_run_dependencies(desc);
+		}
+
+		/* Free descriptors */
+		spin_lock_irqsave(&mchan->lock, irqflags);
+		list_splice_tail_init(&list, &mchan->free);
+		spin_unlock_irqrestore(&mchan->lock, irqflags);
+	}
+}
+
+/*
+ * Called once for each submitted descriptor.
+ * PM is locked once for each descriptor that is currently
+ * in execution.
+ */
+static void hidma_callback(void *data)
+{
+	struct hidma_desc *mdesc = data;
+	struct hidma_chan *mchan = to_hidma_chan(mdesc->desc.chan);
+	unsigned long irqflags;
+	struct dma_device *ddev = mchan->chan.device;
+	struct hidma_dev *dmadev = to_hidma_dev(ddev);
+	bool queued = false;
+
+	dev_dbg(dmadev->ddev.dev, "callback: data:0x%p\n", data);
+
+	spin_lock_irqsave(&mchan->lock, irqflags);
+
+	if (mdesc->node.next) {
+		/* Delete from the active list, add to completed list */
+		list_move_tail(&mdesc->node, &mchan->completed);
+		queued = true;
+	}
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+	hidma_process_completed(dmadev);
+
+	if (queued) {
+		pm_runtime_mark_last_busy(dmadev->ddev.dev);
+		pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	}
+}
+
+static int hidma_chan_init(struct hidma_dev *dmadev, u32 dma_sig)
+{
+	struct hidma_chan *mchan;
+	struct dma_device *ddev;
+
+	mchan = devm_kzalloc(dmadev->ddev.dev, sizeof(*mchan), GFP_KERNEL);
+	if (!mchan)
+		return -ENOMEM;
+
+	ddev = &dmadev->ddev;
+	mchan->dma_sig = dma_sig;
+	mchan->dmadev = dmadev;
+	mchan->chan.device = ddev;
+	dma_cookie_init(&mchan->chan);
+
+	INIT_LIST_HEAD(&mchan->free);
+	INIT_LIST_HEAD(&mchan->prepared);
+	INIT_LIST_HEAD(&mchan->active);
+	INIT_LIST_HEAD(&mchan->completed);
+
+	spin_lock_init(&mchan->lock);
+	list_add_tail(&mchan->chan.device_node, &ddev->channels);
+	dmadev->ddev.chancnt++;
+	return 0;
+}
+
+static void hidma_issue_pending(struct dma_chan *dmach)
+{
+	struct hidma_chan *mchan = to_hidma_chan(dmach);
+	struct hidma_dev *dmadev = mchan->dmadev;
+
+	/* PM will be released in hidma_callback function. */
+	pm_runtime_get_sync(dmadev->ddev.dev);
+	hidma_ll_start(dmadev->lldev);
+}
+
+static enum dma_status hidma_tx_status(struct dma_chan *dmach,
+					dma_cookie_t cookie,
+					struct dma_tx_state *txstate)
+{
+	enum dma_status ret;
+	struct hidma_chan *mchan = to_hidma_chan(dmach);
+
+	if (mchan->paused)
+		ret = DMA_PAUSED;
+	else
+		ret = dma_cookie_status(dmach, cookie, txstate);
+
+	return ret;
+}
+
+/*
+ * Submit descriptor to hardware.
+ * Lock the PM for each descriptor we are sending.
+ */
+static dma_cookie_t hidma_tx_submit(struct dma_async_tx_descriptor *txd)
+{
+	struct hidma_chan *mchan = to_hidma_chan(txd->chan);
+	struct hidma_dev *dmadev = mchan->dmadev;
+	struct hidma_desc *mdesc;
+	unsigned long irqflags;
+	dma_cookie_t cookie;
+
+	if (!hidma_ll_isenabled(dmadev->lldev))
+		return -ENODEV;
+
+	mdesc = container_of(txd, struct hidma_desc, desc);
+	spin_lock_irqsave(&mchan->lock, irqflags);
+
+	/* Move descriptor to active */
+	list_move_tail(&mdesc->node, &mchan->active);
+
+	/* Update cookie */
+	cookie = dma_cookie_assign(txd);
+
+	hidma_ll_queue_request(dmadev->lldev, mdesc->tre_ch);
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+	return cookie;
+}
+
+static int hidma_alloc_chan_resources(struct dma_chan *dmach)
+{
+	struct hidma_chan *mchan = to_hidma_chan(dmach);
+	struct hidma_dev *dmadev = mchan->dmadev;
+	int rc = 0;
+	struct hidma_desc *mdesc, *tmp;
+	unsigned long irqflags;
+	LIST_HEAD(descs);
+	u32 i;
+
+	if (mchan->allocated)
+		return 0;
+
+	/* Alloc descriptors for this channel */
+	for (i = 0; i < dmadev->nr_descriptors; i++) {
+		mdesc = kzalloc(sizeof(struct hidma_desc), GFP_KERNEL);
+		if (!mdesc) {
+			rc = -ENOMEM;
+			break;
+		}
+		dma_async_tx_descriptor_init(&mdesc->desc, dmach);
+		mdesc->desc.flags = DMA_CTRL_ACK;
+		mdesc->desc.tx_submit = hidma_tx_submit;
+
+		rc = hidma_ll_request(dmadev->lldev,
+				mchan->dma_sig, "DMA engine", hidma_callback,
+				mdesc, &mdesc->tre_ch);
+		if (rc) {
+			dev_err(dmach->device->dev,
+				"channel alloc failed at %u\n", i);
+			kfree(mdesc);
+			break;
+		}
+		list_add_tail(&mdesc->node, &descs);
+	}
+
+	if (rc) {
+		/* return the allocated descriptors */
+		list_for_each_entry_safe(mdesc, tmp, &descs, node) {
+			hidma_ll_free(dmadev->lldev, mdesc->tre_ch);
+			kfree(mdesc);
+		}
+		return rc;
+	}
+
+	spin_lock_irqsave(&mchan->lock, irqflags);
+	list_splice_tail_init(&descs, &mchan->free);
+	mchan->allocated = true;
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+	dev_dbg(dmadev->ddev.dev,
+		"allocated channel for %u\n", mchan->dma_sig);
+	return 1;
+}
+
+static void hidma_free_chan_resources(struct dma_chan *dmach)
+{
+	struct hidma_chan *mchan = to_hidma_chan(dmach);
+	struct hidma_dev *mdma = mchan->dmadev;
+	struct hidma_desc *mdesc, *tmp;
+	unsigned long irqflags;
+	LIST_HEAD(descs);
+
+	if (!list_empty(&mchan->prepared) ||
+		!list_empty(&mchan->active) ||
+		!list_empty(&mchan->completed)) {
+		/*
+		 * We have unfinished requests waiting.
+		 * Terminate the request from the hardware.
+		 */
+		hidma_cleanup_pending_tre(mdma->lldev, ERR_INFO_SW,
+				ERR_CODE_UNEXPECTED_TERMINATE);
+
+		/* Give enough time for completions to be called. */
+		msleep(100);
+	}
+
+	spin_lock_irqsave(&mchan->lock, irqflags);
+	/* Channel must be idle */
+	WARN_ON(!list_empty(&mchan->prepared));
+	WARN_ON(!list_empty(&mchan->active));
+	WARN_ON(!list_empty(&mchan->completed));
+
+	/* Move data */
+	list_splice_tail_init(&mchan->free, &descs);
+
+	/* Free descriptors */
+	list_for_each_entry_safe(mdesc, tmp, &descs, node) {
+		hidma_ll_free(mdma->lldev, mdesc->tre_ch);
+		list_del(&mdesc->node);
+		kfree(mdesc);
+	}
+
+	mchan->allocated = 0;
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+	dev_dbg(mdma->ddev.dev, "freed channel for %u\n", mchan->dma_sig);
+}
+
+
+static struct dma_async_tx_descriptor *
+hidma_prep_dma_memcpy(struct dma_chan *dmach, dma_addr_t dma_dest,
+			dma_addr_t dma_src, size_t len, unsigned long flags)
+{
+	struct hidma_chan *mchan = to_hidma_chan(dmach);
+	struct hidma_desc *mdesc = NULL;
+	struct hidma_dev *mdma = mchan->dmadev;
+	unsigned long irqflags;
+
+	dev_dbg(mdma->ddev.dev,
+		"memcpy: chan:%p dest:%pad src:%pad len:%zu\n", mchan,
+		&dma_dest, &dma_src, len);
+
+	/* Get free descriptor */
+	spin_lock_irqsave(&mchan->lock, irqflags);
+	if (!list_empty(&mchan->free)) {
+		mdesc = list_first_entry(&mchan->free, struct hidma_desc,
+					node);
+		list_del(&mdesc->node);
+	}
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+	if (!mdesc)
+		return NULL;
+
+	hidma_ll_set_transfer_params(mdma->lldev, mdesc->tre_ch,
+			dma_src, dma_dest, len, flags);
+
+	/* Place descriptor in prepared list */
+	spin_lock_irqsave(&mchan->lock, irqflags);
+	list_add_tail(&mdesc->node, &mchan->prepared);
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+	return &mdesc->desc;
+}
+
+static int hidma_terminate_all(struct dma_chan *chan)
+{
+	struct hidma_dev *dmadev;
+	LIST_HEAD(head);
+	unsigned long irqflags;
+	LIST_HEAD(list);
+	struct hidma_desc *tmp, *mdesc = NULL;
+	int rc;
+	struct hidma_chan *mchan;
+
+	mchan = to_hidma_chan(chan);
+	dmadev = to_hidma_dev(mchan->chan.device);
+	dev_dbg(dmadev->ddev.dev, "terminateall: chan:0x%p\n", mchan);
+
+	pm_runtime_get_sync(dmadev->ddev.dev);
+	/* give completed requests a chance to finish */
+	hidma_process_completed(dmadev);
+
+	spin_lock_irqsave(&mchan->lock, irqflags);
+	list_splice_init(&mchan->active, &list);
+	list_splice_init(&mchan->prepared, &list);
+	list_splice_init(&mchan->completed, &list);
+	spin_unlock_irqrestore(&mchan->lock, irqflags);
+
+	/* this suspends the existing transfer */
+	rc = hidma_ll_pause(dmadev->lldev);
+	if (rc) {
+		dev_err(dmadev->ddev.dev, "channel did not pause\n");
+		goto out;
+	}
+
+	/* return all user requests */
+	list_for_each_entry_safe(mdesc, tmp, &list, node) {
+		struct dma_async_tx_descriptor	*txd = &mdesc->desc;
+		dma_async_tx_callback callback = mdesc->desc.callback;
+		void *param = mdesc->desc.callback_param;
+		enum dma_status status;
+
+		dma_descriptor_unmap(txd);
+
+		status = hidma_ll_status(dmadev->lldev, mdesc->tre_ch);
+		/*
+		 * The API requires that no submissions are done from a
+		 * callback, so we don't need to drop the lock here
+		 */
+		if (callback && (status == DMA_COMPLETE))
+			callback(param);
+
+		dma_run_dependencies(txd);
+
+		/* move myself to free_list */
+		list_move(&mdesc->node, &mchan->free);
+	}
+
+	/* reinitialize the hardware */
+	rc = hidma_ll_setup(dmadev->lldev);
+
+out:
+	pm_runtime_mark_last_busy(dmadev->ddev.dev);
+	pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	return rc;
+}
+
+static int hidma_pause(struct dma_chan *chan)
+{
+	struct hidma_chan *mchan;
+	struct hidma_dev *dmadev;
+
+	mchan = to_hidma_chan(chan);
+	dmadev = to_hidma_dev(mchan->chan.device);
+	dev_dbg(dmadev->ddev.dev, "pause: chan:0x%p\n", mchan);
+
+	if (!mchan->paused) {
+		pm_runtime_get_sync(dmadev->ddev.dev);
+		if (hidma_ll_pause(dmadev->lldev))
+			dev_warn(dmadev->ddev.dev, "channel did not stop\n");
+		mchan->paused = true;
+		pm_runtime_mark_last_busy(dmadev->ddev.dev);
+		pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	}
+	return 0;
+}
+
+static int hidma_resume(struct dma_chan *chan)
+{
+	struct hidma_chan *mchan;
+	struct hidma_dev *dmadev;
+	int rc = 0;
+
+	mchan = to_hidma_chan(chan);
+	dmadev = to_hidma_dev(mchan->chan.device);
+	dev_dbg(dmadev->ddev.dev, "resume: chan:0x%p\n", mchan);
+
+	if (mchan->paused) {
+		pm_runtime_get_sync(dmadev->ddev.dev);
+		rc = hidma_ll_resume(dmadev->lldev);
+		if (!rc)
+			mchan->paused = false;
+		else
+			dev_err(dmadev->ddev.dev,
+					"failed to resume the channel");
+		pm_runtime_mark_last_busy(dmadev->ddev.dev);
+		pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	}
+	return rc;
+}
+
+static irqreturn_t hidma_chirq_handler(int chirq, void *arg)
+{
+	struct hidma_lldev **lldev_ptr = arg;
+	irqreturn_t ret;
+	struct hidma_dev *dmadev = to_hidma_dev_from_lldev(lldev_ptr);
+
+	/*
+	 * All interrupts are request driven.
+	 * HW doesn't send an interrupt by itself.
+	 */
+	pm_runtime_get_sync(dmadev->ddev.dev);
+	ret = hidma_ll_inthandler(chirq, *lldev_ptr);
+	pm_runtime_mark_last_busy(dmadev->ddev.dev);
+	pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	return ret;
+}
+
+static int hidma_probe(struct platform_device *pdev)
+{
+	struct hidma_dev *dmadev;
+	int rc = 0;
+	struct resource *trca_resource;
+	struct resource *evca_resource;
+	int chirq;
+	int current_channel_index = atomic_read(&channel_ref_count);
+	void *evca;
+	void *trca;
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_TIMEOUT);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	trca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!trca_resource) {
+		rc = -ENODEV;
+		goto bailout;
+	}
+
+	trca = devm_ioremap_resource(&pdev->dev, trca_resource);
+	if (IS_ERR(trca)) {
+		rc = -ENOMEM;
+		goto bailout;
+	}
+
+	evca_resource = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!evca_resource) {
+		rc = -ENODEV;
+		goto bailout;
+	}
+
+	evca = devm_ioremap_resource(&pdev->dev, evca_resource);
+	if (IS_ERR(evca)) {
+		rc = -ENOMEM;
+		goto bailout;
+	}
+
+	/*
+	 * This driver only handles the channel IRQs.
+	 * Common IRQ is handled by the management driver.
+	 */
+	chirq = platform_get_irq(pdev, 0);
+	if (chirq < 0) {
+		rc = -ENODEV;
+		goto bailout;
+	}
+
+	dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev), GFP_KERNEL);
+	if (!dmadev) {
+		rc = -ENOMEM;
+		goto bailout;
+	}
+
+	INIT_LIST_HEAD(&dmadev->ddev.channels);
+	spin_lock_init(&dmadev->lock);
+	dmadev->ddev.dev = &pdev->dev;
+	pm_runtime_get_sync(dmadev->ddev.dev);
+
+	dma_cap_set(DMA_MEMCPY, dmadev->ddev.cap_mask);
+	if (WARN_ON(!pdev->dev.dma_mask)) {
+		rc = -ENXIO;
+		goto dmafree;
+	}
+
+	dmadev->dev_evca = evca;
+	dmadev->evca_resource = evca_resource;
+	dmadev->dev_trca = trca;
+	dmadev->trca_resource = trca_resource;
+	dmadev->ddev.device_prep_dma_memcpy = hidma_prep_dma_memcpy;
+	dmadev->ddev.device_alloc_chan_resources =
+		hidma_alloc_chan_resources;
+	dmadev->ddev.device_free_chan_resources = hidma_free_chan_resources;
+	dmadev->ddev.device_tx_status = hidma_tx_status;
+	dmadev->ddev.device_issue_pending = hidma_issue_pending;
+	dmadev->ddev.device_pause = hidma_pause;
+	dmadev->ddev.device_resume = hidma_resume;
+	dmadev->ddev.device_terminate_all = hidma_terminate_all;
+	dmadev->ddev.copy_align = 8;
+
+	device_property_read_u32(&pdev->dev, "desc-count",
+				&dmadev->nr_descriptors);
+
+	if (!dmadev->nr_descriptors && nr_desc_prm)
+		dmadev->nr_descriptors = nr_desc_prm;
+
+	if (!dmadev->nr_descriptors)
+		goto dmafree;
+
+	if (current_channel_index > MAX_HIDMA_CHANNELS)
+		goto dmafree;
+
+	dmadev->evridx = -1;
+	device_property_read_u32(&pdev->dev, "event-channel", &dmadev->evridx);
+
+	/* kernel command line override for the guest machine */
+	if (event_channel_idx[current_channel_index] != -1)
+		dmadev->evridx = event_channel_idx[current_channel_index];
+
+	if (dmadev->evridx == -1)
+		goto dmafree;
+
+	/* Set DMA mask to 64 bits. */
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (rc) {
+		dev_warn(&pdev->dev, "unable to set coherent mask to 64");
+		rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (rc)
+			goto dmafree;
+	}
+
+	dmadev->lldev = hidma_ll_init(dmadev->ddev.dev,
+				dmadev->nr_descriptors, dmadev->dev_trca,
+				dmadev->dev_evca, dmadev->evridx);
+	if (!dmadev->lldev) {
+		rc = -EPROBE_DEFER;
+		goto dmafree;
+	}
+
+	rc = devm_request_irq(&pdev->dev, chirq, hidma_chirq_handler, 0,
+			      "qcom-hidma", &dmadev->lldev);
+	if (rc)
+		goto uninit;
+
+	INIT_LIST_HEAD(&dmadev->ddev.channels);
+	rc = hidma_chan_init(dmadev, 0);
+	if (rc)
+		goto uninit;
+
+	rc = dma_selftest_memcpy(&dmadev->ddev);
+	if (rc)
+		goto uninit;
+
+	rc = dma_async_device_register(&dmadev->ddev);
+	if (rc)
+		goto uninit;
+
+	hidma_debug_init(dmadev);
+	dev_info(&pdev->dev, "HI-DMA engine driver registration complete\n");
+	platform_set_drvdata(pdev, dmadev);
+	pm_runtime_mark_last_busy(dmadev->ddev.dev);
+	pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	atomic_inc(&channel_ref_count);
+	return 0;
+
+uninit:
+	hidma_debug_uninit(dmadev);
+	hidma_ll_uninit(dmadev->lldev);
+dmafree:
+	if (dmadev)
+		hidma_free(dmadev);
+bailout:
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_put_sync_suspend(&pdev->dev);
+	return rc;
+}
+
+static int hidma_remove(struct platform_device *pdev)
+{
+	struct hidma_dev *dmadev = platform_get_drvdata(pdev);
+
+	dev_dbg(&pdev->dev, "removing\n");
+	pm_runtime_get_sync(dmadev->ddev.dev);
+
+	dma_async_device_unregister(&dmadev->ddev);
+	hidma_debug_uninit(dmadev);
+	hidma_ll_uninit(dmadev->lldev);
+	hidma_free(dmadev);
+
+	dev_info(&pdev->dev, "HI-DMA engine removed\n");
+	pm_runtime_put_sync_suspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_ACPI)
+static const struct acpi_device_id hidma_acpi_ids[] = {
+	{"QCOM8061"},
+	{},
+};
+#endif
+
+static const struct of_device_id hidma_match[] = {
+	{ .compatible = "qcom,hidma-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hidma_match);
+
+static struct platform_driver hidma_driver = {
+	.probe = hidma_probe,
+	.remove = hidma_remove,
+	.driver = {
+		.name = "hidma",
+		.of_match_table = hidma_match,
+		.acpi_match_table = ACPI_PTR(hidma_acpi_ids),
+	},
+};
+module_platform_driver(hidma_driver);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/qcom/hidma.h b/drivers/dma/qcom/hidma.h
new file mode 100644
index 0000000..195d6b5
--- /dev/null
+++ b/drivers/dma/qcom/hidma.h
@@ -0,0 +1,157 @@ 
+/*
+ * Qualcomm Technologies HIDMA data structures
+ *
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef QCOM_HIDMA_H
+#define QCOM_HIDMA_H
+
+#include <linux/kfifo.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+
+#define TRE_SIZE			32 /* each TRE is 32 bytes  */
+#define TRE_CFG_IDX			0
+#define TRE_LEN_IDX			1
+#define TRE_SRC_LOW_IDX		2
+#define TRE_SRC_HI_IDX			3
+#define TRE_DEST_LOW_IDX		4
+#define TRE_DEST_HI_IDX		5
+
+struct hidma_tx_status {
+	u8 err_info;			/* error record in this transfer    */
+	u8 err_code;			/* completion code		    */
+};
+
+struct hidma_tre {
+	atomic_t allocated;		/* if this channel is allocated	    */
+	bool queued;			/* flag whether this is pending     */
+	u16 status;			/* status			    */
+	u32 chidx;			/* index of the tre	    */
+	u32 dma_sig;			/* signature of the tre	    */
+	const char *dev_name;		/* name of the device		    */
+	void (*callback)(void *data);	/* requester callback		    */
+	void *data;			/* Data associated with this channel*/
+	struct hidma_lldev *lldev;	/* lldma device pointer		    */
+	u32 tre_local[TRE_SIZE / sizeof(u32) + 1]; /* TRE local copy        */
+	u32 tre_index;			/* the offset where this was written*/
+	u32 int_flags;			/* interrupt flags*/
+};
+
+struct hidma_lldev {
+	bool initialized;		/* initialized flag               */
+	u8 trch_state;			/* trch_state of the device	  */
+	u8 evch_state;			/* evch_state of the device	  */
+	u8 evridx;			/* event channel to notify	  */
+	u32 nr_tres;			/* max number of configs          */
+	spinlock_t lock;		/* reentrancy                     */
+	struct hidma_tre *trepool;	/* trepool of user configs */
+	struct device *dev;		/* device			  */
+	void __iomem *trca;		/* Transfer Channel address       */
+	void __iomem *evca;		/* Event Channel address          */
+	struct hidma_tre
+		**pending_tre_list;	/* Pointers to pending TREs	  */
+	struct hidma_tx_status
+		*tx_status_list;	/* Pointers to pending TREs status*/
+	s32 pending_tre_count;		/* Number of TREs pending	  */
+
+	void *tre_ring;		/* TRE ring			  */
+	dma_addr_t tre_ring_handle;	/* TRE ring to be shared with HW  */
+	u32 tre_ring_size;		/* Byte size of the ring	  */
+	u32 tre_processed_off;		/* last processed TRE		   */
+
+	void *evre_ring;		/* EVRE ring			   */
+	dma_addr_t evre_ring_handle;	/* EVRE ring to be shared with HW  */
+	u32 evre_ring_size;		/* Byte size of the ring	  */
+	u32 evre_processed_off;	/* last processed EVRE		   */
+
+	u32 tre_write_offset;           /* TRE write location              */
+	struct tasklet_struct task;	/* task delivering notifications   */
+	DECLARE_KFIFO_PTR(handoff_fifo,
+		struct hidma_tre *);    /* pending TREs FIFO              */
+};
+
+struct hidma_desc {
+	struct dma_async_tx_descriptor	desc;
+	/* link list node for this channel*/
+	struct list_head		node;
+	u32				tre_ch;
+};
+
+struct hidma_chan {
+	bool				paused;
+	bool				allocated;
+	char				dbg_name[16];
+	u32				dma_sig;
+
+	/*
+	 * active descriptor on this channel
+	 * It is used by the DMA complete notification to
+	 * locate the descriptor that initiated the transfer.
+	 */
+	struct dentry			*debugfs;
+	struct dentry			*stats;
+	struct hidma_dev		*dmadev;
+
+	struct dma_chan			chan;
+	struct list_head		free;
+	struct list_head		prepared;
+	struct list_head		active;
+	struct list_head		completed;
+
+	/* Lock for this structure */
+	spinlock_t			lock;
+};
+
+struct hidma_dev {
+	int				evridx;
+	u32				nr_descriptors;
+
+	struct hidma_lldev		*lldev;
+	void				__iomem *dev_trca;
+	struct resource			*trca_resource;
+	void				__iomem *dev_evca;
+	struct resource			*evca_resource;
+
+	/* used to protect the pending channel list*/
+	spinlock_t			lock;
+	struct dma_device		ddev;
+
+	struct dentry			*debugfs;
+	struct dentry			*stats;
+};
+
+int hidma_ll_request(struct hidma_lldev *llhndl, u32 dev_id,
+			const char *dev_name,
+			void (*callback)(void *data), void *data, u32 *tre_ch);
+
+void hidma_ll_free(struct hidma_lldev *llhndl, u32 tre_ch);
+enum dma_status hidma_ll_status(struct hidma_lldev *llhndl, u32 tre_ch);
+bool hidma_ll_isenabled(struct hidma_lldev *llhndl);
+int hidma_ll_queue_request(struct hidma_lldev *llhndl, u32 tre_ch);
+int hidma_ll_start(struct hidma_lldev *llhndl);
+int hidma_ll_pause(struct hidma_lldev *llhndl);
+int hidma_ll_resume(struct hidma_lldev *llhndl);
+void hidma_ll_set_transfer_params(struct hidma_lldev *llhndl, u32 tre_ch,
+	dma_addr_t src, dma_addr_t dest, u32 len, u32 flags);
+int hidma_ll_setup(struct hidma_lldev *lldev);
+struct hidma_lldev *hidma_ll_init(struct device *dev, u32 max_channels,
+			void __iomem *trca, void __iomem *evca,
+			u8 evridx);
+int hidma_ll_uninit(struct hidma_lldev *llhndl);
+irqreturn_t hidma_ll_inthandler(int irq, void *arg);
+void hidma_cleanup_pending_tre(struct hidma_lldev *llhndl, u8 err_info,
+				u8 err_code);
+int hidma_debug_init(struct hidma_dev *dmadev);
+void hidma_debug_uninit(struct hidma_dev *dmadev);
+#endif
diff --git a/drivers/dma/qcom/hidma_dbg.c b/drivers/dma/qcom/hidma_dbg.c
new file mode 100644
index 0000000..e0e6711
--- /dev/null
+++ b/drivers/dma/qcom/hidma_dbg.c
@@ -0,0 +1,225 @@ 
+/*
+ * Qualcomm Technologies HIDMA debug file
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/pm_runtime.h>
+
+#include "hidma.h"
+
+void hidma_ll_chstats(struct seq_file *s, void *llhndl, u32 tre_ch)
+{
+	struct hidma_lldev *lldev = llhndl;
+	struct hidma_tre *tre;
+	u32 length;
+	dma_addr_t src_start;
+	dma_addr_t dest_start;
+	u32 *tre_local;
+
+	if (tre_ch >= lldev->nr_tres) {
+		dev_err(lldev->dev, "invalid TRE number in chstats:%d",
+			tre_ch);
+		return;
+	}
+	tre = &lldev->trepool[tre_ch];
+	seq_printf(s, "------Channel %d -----\n", tre_ch);
+	seq_printf(s, "allocated=%d\n", atomic_read(&tre->allocated));
+	seq_printf(s, "queued=0x%x\n", tre->queued);
+	seq_printf(s, "err_info=0x%x\n",
+		   lldev->tx_status_list[tre->chidx].err_info);
+	seq_printf(s, "err_code=0x%x\n",
+		   lldev->tx_status_list[tre->chidx].err_code);
+	seq_printf(s, "status=0x%x\n", tre->status);
+	seq_printf(s, "chidx=0x%x\n", tre->chidx);
+	seq_printf(s, "dma_sig=0x%x\n", tre->dma_sig);
+	seq_printf(s, "dev_name=%s\n", tre->dev_name);
+	seq_printf(s, "callback=%p\n", tre->callback);
+	seq_printf(s, "data=%p\n", tre->data);
+	seq_printf(s, "tre_index=0x%x\n", tre->tre_index);
+
+	tre_local = &tre->tre_local[0];
+	src_start = tre_local[TRE_SRC_LOW_IDX];
+	src_start = ((u64)(tre_local[TRE_SRC_HI_IDX]) << 32) + src_start;
+	dest_start = tre_local[TRE_DEST_LOW_IDX];
+	dest_start += ((u64)(tre_local[TRE_DEST_HI_IDX]) << 32);
+	length = tre_local[TRE_LEN_IDX];
+
+	seq_printf(s, "src=%pap\n", &src_start);
+	seq_printf(s, "dest=%pap\n", &dest_start);
+	seq_printf(s, "length=0x%x\n", length);
+}
+
+void hidma_ll_devstats(struct seq_file *s, void *llhndl)
+{
+	struct hidma_lldev *lldev = llhndl;
+
+	seq_puts(s, "------Device -----\n");
+	seq_printf(s, "lldev init=0x%x\n", lldev->initialized);
+	seq_printf(s, "trch_state=0x%x\n", lldev->trch_state);
+	seq_printf(s, "evch_state=0x%x\n", lldev->evch_state);
+	seq_printf(s, "evridx=0x%x\n", lldev->evridx);
+	seq_printf(s, "nr_tres=0x%x\n", lldev->nr_tres);
+	seq_printf(s, "trca=%p\n", lldev->trca);
+	seq_printf(s, "tre_ring=%p\n", lldev->tre_ring);
+	seq_printf(s, "tre_ring_handle=%pap\n", &lldev->tre_ring_handle);
+	seq_printf(s, "tre_ring_size=0x%x\n", lldev->tre_ring_size);
+	seq_printf(s, "tre_processed_off=0x%x\n", lldev->tre_processed_off);
+	seq_printf(s, "pending_tre_count=%d\n", lldev->pending_tre_count);
+	seq_printf(s, "evca=%p\n", lldev->evca);
+	seq_printf(s, "evre_ring=%p\n", lldev->evre_ring);
+	seq_printf(s, "evre_ring_handle=%pap\n", &lldev->evre_ring_handle);
+	seq_printf(s, "evre_ring_size=0x%x\n", lldev->evre_ring_size);
+	seq_printf(s, "evre_processed_off=0x%x\n", lldev->evre_processed_off);
+	seq_printf(s, "tre_write_offset=0x%x\n", lldev->tre_write_offset);
+}
+
+/**
+ * hidma_chan_stats: display HIDMA channel statistics
+ *
+ * Display the statistics for the current HIDMA virtual channel device.
+ */
+static int hidma_chan_stats(struct seq_file *s, void *unused)
+{
+	struct hidma_chan *mchan = s->private;
+	struct hidma_desc *mdesc;
+	struct hidma_dev *dmadev = mchan->dmadev;
+
+	pm_runtime_get_sync(dmadev->ddev.dev);
+	seq_printf(s, "paused=%u\n", mchan->paused);
+	seq_printf(s, "dma_sig=%u\n", mchan->dma_sig);
+	seq_puts(s, "prepared\n");
+	list_for_each_entry(mdesc, &mchan->prepared, node)
+		hidma_ll_chstats(s, mchan->dmadev->lldev, mdesc->tre_ch);
+
+	seq_puts(s, "active\n");
+		list_for_each_entry(mdesc, &mchan->active, node)
+			hidma_ll_chstats(s, mchan->dmadev->lldev,
+				mdesc->tre_ch);
+
+	seq_puts(s, "completed\n");
+		list_for_each_entry(mdesc, &mchan->completed, node)
+			hidma_ll_chstats(s, mchan->dmadev->lldev,
+				mdesc->tre_ch);
+
+	hidma_ll_devstats(s, mchan->dmadev->lldev);
+	pm_runtime_mark_last_busy(dmadev->ddev.dev);
+	pm_runtime_put_autosuspend(dmadev->ddev.dev);
+	return 0;
+}
+
+/**
+ * hidma_dma_info: display HIDMA device info
+ *
+ * Display the info for the current HIDMA device.
+ */
+static int hidma_dma_info(struct seq_file *s, void *unused)
+{
+	struct hidma_dev *dmadev = s->private;
+	resource_size_t sz;
+
+	seq_printf(s, "nr_descriptors=%d\n", dmadev->nr_descriptors);
+	seq_printf(s, "dev_trca=%p\n", &dmadev->dev_trca);
+	seq_printf(s, "dev_trca_phys=%pa\n",
+		&dmadev->trca_resource->start);
+	sz = resource_size(dmadev->trca_resource);
+	seq_printf(s, "dev_trca_size=%pa\n", &sz);
+	seq_printf(s, "dev_evca=%p\n", &dmadev->dev_evca);
+	seq_printf(s, "dev_evca_phys=%pa\n",
+		&dmadev->evca_resource->start);
+	sz = resource_size(dmadev->evca_resource);
+	seq_printf(s, "dev_evca_size=%pa\n", &sz);
+	return 0;
+}
+
+static int hidma_chan_stats_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hidma_chan_stats, inode->i_private);
+}
+
+static int hidma_dma_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hidma_dma_info, inode->i_private);
+}
+
+static const struct file_operations hidma_chan_fops = {
+	.open = hidma_chan_stats_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static const struct file_operations hidma_dma_fops = {
+	.open = hidma_dma_info_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+void hidma_debug_uninit(struct hidma_dev *dmadev)
+{
+	debugfs_remove_recursive(dmadev->debugfs);
+	debugfs_remove_recursive(dmadev->stats);
+}
+
+int hidma_debug_init(struct hidma_dev *dmadev)
+{
+	int rc = 0;
+	int chidx = 0;
+	struct list_head *position = NULL;
+
+	dmadev->debugfs = debugfs_create_dir(dev_name(dmadev->ddev.dev),
+						NULL);
+	if (!dmadev->debugfs) {
+		rc = -ENODEV;
+		return rc;
+	}
+
+	/* walk through the virtual channel list */
+	list_for_each(position, &dmadev->ddev.channels) {
+		struct hidma_chan *chan;
+
+		chan = list_entry(position, struct hidma_chan,
+				chan.device_node);
+		sprintf(chan->dbg_name, "chan%d", chidx);
+		chan->debugfs = debugfs_create_dir(chan->dbg_name,
+						dmadev->debugfs);
+		if (!chan->debugfs) {
+			rc = -ENOMEM;
+			goto cleanup;
+		}
+		chan->stats = debugfs_create_file("stats", S_IRUGO,
+				chan->debugfs, chan,
+				&hidma_chan_fops);
+		if (!chan->stats) {
+			rc = -ENOMEM;
+			goto cleanup;
+		}
+		chidx++;
+	}
+
+	dmadev->stats = debugfs_create_file("stats", S_IRUGO,
+			dmadev->debugfs, dmadev,
+			&hidma_dma_fops);
+	if (!dmadev->stats) {
+		rc = -ENOMEM;
+		goto cleanup;
+	}
+
+	return 0;
+cleanup:
+	hidma_debug_uninit(dmadev);
+	return rc;
+}
diff --git a/drivers/dma/qcom/hidma_ll.c b/drivers/dma/qcom/hidma_ll.c
new file mode 100644
index 0000000..f5c0b8b
--- /dev/null
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -0,0 +1,944 @@ 
+/*
+ * Qualcomm Technologies HIDMA DMA engine low level code
+ *
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dmaengine.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <linux/iopoll.h>
+#include <linux/kfifo.h>
+
+#include "hidma.h"
+
+#define EVRE_SIZE			16 /* each EVRE is 16 bytes */
+
+#define TRCA_CTRLSTS_OFFSET		0x0
+#define TRCA_RING_LOW_OFFSET		0x8
+#define TRCA_RING_HIGH_OFFSET		0xC
+#define TRCA_RING_LEN_OFFSET		0x10
+#define TRCA_READ_PTR_OFFSET		0x18
+#define TRCA_WRITE_PTR_OFFSET		0x20
+#define TRCA_DOORBELL_OFFSET		0x400
+
+#define EVCA_CTRLSTS_OFFSET		0x0
+#define EVCA_INTCTRL_OFFSET		0x4
+#define EVCA_RING_LOW_OFFSET		0x8
+#define EVCA_RING_HIGH_OFFSET		0xC
+#define EVCA_RING_LEN_OFFSET		0x10
+#define EVCA_READ_PTR_OFFSET		0x18
+#define EVCA_WRITE_PTR_OFFSET		0x20
+#define EVCA_DOORBELL_OFFSET		0x400
+
+#define EVCA_IRQ_STAT_OFFSET		0x100
+#define EVCA_IRQ_CLR_OFFSET		0x108
+#define EVCA_IRQ_EN_OFFSET		0x110
+
+#define EVRE_CFG_IDX			0
+#define EVRE_LEN_IDX			1
+#define EVRE_DEST_LOW_IDX		2
+#define EVRE_DEST_HI_IDX		3
+
+#define EVRE_ERRINFO_BIT_POS		24
+#define EVRE_CODE_BIT_POS		28
+
+#define EVRE_ERRINFO_MASK		0xF
+#define EVRE_CODE_MASK			0xF
+
+#define CH_CONTROL_MASK		0xFF
+#define CH_STATE_MASK			0xFF
+#define CH_STATE_BIT_POS		0x8
+
+#define MAKE64(high, low) (((u64)(high) << 32) | (low))
+
+#define IRQ_EV_CH_EOB_IRQ_BIT_POS	0
+#define IRQ_EV_CH_WR_RESP_BIT_POS	1
+#define IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS 9
+#define IRQ_TR_CH_DATA_RD_ER_BIT_POS	10
+#define IRQ_TR_CH_DATA_WR_ER_BIT_POS	11
+#define IRQ_TR_CH_INVALID_TRE_BIT_POS	14
+
+#define	ENABLE_IRQS (BIT(IRQ_EV_CH_EOB_IRQ_BIT_POS) | \
+		BIT(IRQ_EV_CH_WR_RESP_BIT_POS) | \
+		BIT(IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS) |	 \
+		BIT(IRQ_TR_CH_DATA_RD_ER_BIT_POS) |		 \
+		BIT(IRQ_TR_CH_DATA_WR_ER_BIT_POS) |		 \
+		BIT(IRQ_TR_CH_INVALID_TRE_BIT_POS))
+
+enum ch_command {
+	CH_DISABLE = 0,
+	CH_ENABLE = 1,
+	CH_SUSPEND = 2,
+	CH_RESET = 9,
+};
+
+enum ch_state {
+	CH_DISABLED = 0,
+	CH_ENABLED = 1,
+	CH_RUNNING = 2,
+	CH_SUSPENDED = 3,
+	CH_STOPPED = 4,
+	CH_ERROR = 5,
+	CH_IN_RESET = 9,
+};
+
+enum tre_type {
+	TRE_MEMCPY = 3,
+	TRE_MEMSET = 4,
+};
+
+enum evre_type {
+	EVRE_DMA_COMPLETE = 0x23,
+	EVRE_IMM_DATA = 0x24,
+};
+
+enum err_code {
+	EVRE_STATUS_COMPLETE = 1,
+	EVRE_STATUS_ERROR = 4,
+};
+
+void hidma_ll_free(struct hidma_lldev *lldev, u32 tre_ch)
+{
+	struct hidma_tre *tre;
+
+	if (tre_ch >= lldev->nr_tres) {
+		dev_err(lldev->dev, "invalid TRE number in free:%d", tre_ch);
+		return;
+	}
+
+	tre = &lldev->trepool[tre_ch];
+	if (atomic_read(&tre->allocated) != true) {
+		dev_err(lldev->dev, "trying to free an unused TRE:%d",
+			tre_ch);
+		return;
+	}
+
+	atomic_set(&tre->allocated, 0);
+	dev_dbg(lldev->dev, "free_dma: allocated:%d tre_ch:%d\n",
+		atomic_read(&tre->allocated), tre_ch);
+}
+
+int hidma_ll_request(struct hidma_lldev *lldev, u32 dma_sig,
+			const char *dev_name,
+			void (*callback)(void *data), void *data, u32 *tre_ch)
+{
+	u32 i;
+	struct hidma_tre *tre = NULL;
+	u32 *tre_local;
+
+	if (!tre_ch || !lldev)
+		return -EINVAL;
+
+	/* need to have at least one empty spot in the queue */
+	for (i = 0; i < lldev->nr_tres - 1; i++) {
+		if (atomic_add_unless(&lldev->trepool[i].allocated, 1, 1))
+			break;
+	}
+
+	if (i == (lldev->nr_tres - 1))
+		return -ENOMEM;
+
+	tre = &lldev->trepool[i];
+	tre->dma_sig = dma_sig;
+	tre->dev_name = dev_name;
+	tre->callback = callback;
+	tre->data = data;
+	tre->chidx = i;
+	tre->status = 0;
+	tre->queued = 0;
+	lldev->tx_status_list[i].err_code = 0;
+	tre->lldev = lldev;
+	tre_local = &tre->tre_local[0];
+	tre_local[TRE_CFG_IDX] = TRE_MEMCPY;
+	tre_local[TRE_CFG_IDX] |= ((lldev->evridx & 0xFF) << 8);
+	tre_local[TRE_CFG_IDX] |= BIT(16);	/* set IEOB */
+	*tre_ch = i;
+	if (callback)
+		callback(data);
+	return 0;
+}
+
+/*
+ * Multiple TREs may be queued and waiting in the
+ * pending queue.
+ */
+static void hidma_ll_tre_complete(unsigned long arg)
+{
+	struct hidma_lldev *lldev = (struct hidma_lldev *)arg;
+	struct hidma_tre *tre;
+
+	while (kfifo_out(&lldev->handoff_fifo, &tre, 1)) {
+		/* call the user if it has been read by the hardware*/
+		if (tre->callback)
+			tre->callback(tre->data);
+	}
+}
+
+/*
+ * Called to handle the interrupt for the channel.
+ * Return a positive number if TRE or EVRE were consumed on this run.
+ * Return a positive number if there are pending TREs or EVREs.
+ * Return 0 if there is nothing to consume or no pending TREs/EVREs found.
+ */
+static int hidma_handle_tre_completion(struct hidma_lldev *lldev)
+{
+	struct hidma_tre *tre;
+	u32 evre_write_off;
+	u32 evre_ring_size = lldev->evre_ring_size;
+	u32 tre_ring_size = lldev->tre_ring_size;
+	u32 num_completed = 0, tre_iterator, evre_iterator;
+	unsigned long flags;
+
+	evre_write_off = readl_relaxed(lldev->evca + EVCA_WRITE_PTR_OFFSET);
+	tre_iterator = lldev->tre_processed_off;
+	evre_iterator = lldev->evre_processed_off;
+
+	if ((evre_write_off > evre_ring_size) ||
+		((evre_write_off % EVRE_SIZE) != 0)) {
+		dev_err(lldev->dev, "HW reports invalid EVRE write offset\n");
+		return 0;
+	}
+
+	/*
+	 * By the time control reaches here the number of EVREs and TREs
+	 * may not match. Only consume the ones that hardware told us.
+	 */
+	while ((evre_iterator != evre_write_off)) {
+		u32 *current_evre = lldev->evre_ring + evre_iterator;
+		u32 cfg;
+		u8 err_info;
+
+		spin_lock_irqsave(&lldev->lock, flags);
+		tre = lldev->pending_tre_list[tre_iterator / TRE_SIZE];
+		if (!tre) {
+			spin_unlock_irqrestore(&lldev->lock, flags);
+			dev_warn(lldev->dev,
+				"tre_index [%d] and tre out of sync\n",
+				tre_iterator / TRE_SIZE);
+			tre_iterator += TRE_SIZE;
+			if (tre_iterator >= tre_ring_size)
+				tre_iterator -= tre_ring_size;
+			evre_iterator += EVRE_SIZE;
+			if (evre_iterator >= evre_ring_size)
+				evre_iterator -= evre_ring_size;
+
+			continue;
+		}
+		lldev->pending_tre_list[tre->tre_index] = NULL;
+
+		/*
+		 * Keep track of pending TREs that SW is expecting to receive
+		 * from HW. We got one now. Decrement our counter.
+		 */
+		lldev->pending_tre_count--;
+		if (lldev->pending_tre_count < 0) {
+			dev_warn(lldev->dev,
+				"tre count mismatch on completion");
+			lldev->pending_tre_count = 0;
+		}
+
+		spin_unlock_irqrestore(&lldev->lock, flags);
+
+		cfg = current_evre[EVRE_CFG_IDX];
+		err_info = (cfg >> EVRE_ERRINFO_BIT_POS);
+		err_info = err_info & EVRE_ERRINFO_MASK;
+		lldev->tx_status_list[tre->chidx].err_info = err_info;
+		lldev->tx_status_list[tre->chidx].err_code =
+			(cfg >> EVRE_CODE_BIT_POS) & EVRE_CODE_MASK;
+		tre->queued = 0;
+
+		kfifo_put(&lldev->handoff_fifo, tre);
+		tasklet_schedule(&lldev->task);
+
+		tre_iterator += TRE_SIZE;
+		if (tre_iterator >= tre_ring_size)
+			tre_iterator -= tre_ring_size;
+		evre_iterator += EVRE_SIZE;
+		if (evre_iterator >= evre_ring_size)
+			evre_iterator -= evre_ring_size;
+
+		/*
+		 * Read the new event descriptor written by the HW.
+		 * As we are processing the delivered events, other events
+		 * get queued to the SW for processing.
+		 */
+		evre_write_off =
+			readl_relaxed(lldev->evca + EVCA_WRITE_PTR_OFFSET);
+		num_completed++;
+	}
+
+	if (num_completed) {
+		u32 evre_read_off = (lldev->evre_processed_off +
+				EVRE_SIZE * num_completed);
+		u32 tre_read_off = (lldev->tre_processed_off +
+				TRE_SIZE * num_completed);
+
+		evre_read_off = evre_read_off % evre_ring_size;
+		tre_read_off = tre_read_off % tre_ring_size;
+
+		writel(evre_read_off, lldev->evca + EVCA_DOORBELL_OFFSET);
+
+		/* record the last processed tre offset */
+		lldev->tre_processed_off = tre_read_off;
+		lldev->evre_processed_off = evre_read_off;
+	}
+
+	return num_completed;
+}
+
+void hidma_cleanup_pending_tre(struct hidma_lldev *lldev, u8 err_info,
+				u8 err_code)
+{
+	u32 tre_iterator;
+	struct hidma_tre *tre;
+	u32 tre_ring_size = lldev->tre_ring_size;
+	int num_completed = 0;
+	u32 tre_read_off;
+	unsigned long flags;
+
+	tre_iterator = lldev->tre_processed_off;
+	while (lldev->pending_tre_count) {
+		int tre_index = tre_iterator / TRE_SIZE;
+
+		spin_lock_irqsave(&lldev->lock, flags);
+		tre = lldev->pending_tre_list[tre_index];
+		if (!tre) {
+			spin_unlock_irqrestore(&lldev->lock, flags);
+			tre_iterator += TRE_SIZE;
+			if (tre_iterator >= tre_ring_size)
+				tre_iterator -= tre_ring_size;
+			continue;
+		}
+		lldev->pending_tre_list[tre_index] = NULL;
+		lldev->pending_tre_count--;
+		if (lldev->pending_tre_count < 0) {
+			dev_warn(lldev->dev,
+				"tre count mismatch on completion");
+			lldev->pending_tre_count = 0;
+		}
+		spin_unlock_irqrestore(&lldev->lock, flags);
+
+		lldev->tx_status_list[tre->chidx].err_info = err_info;
+		lldev->tx_status_list[tre->chidx].err_code = err_code;
+		tre->queued = 0;
+
+		kfifo_put(&lldev->handoff_fifo, tre);
+		tasklet_schedule(&lldev->task);
+
+		tre_iterator += TRE_SIZE;
+		if (tre_iterator >= tre_ring_size)
+			tre_iterator -= tre_ring_size;
+
+		num_completed++;
+	}
+	tre_read_off = (lldev->tre_processed_off +
+			TRE_SIZE * num_completed);
+
+	tre_read_off = tre_read_off % tre_ring_size;
+
+	/* record the last processed tre offset */
+	lldev->tre_processed_off = tre_read_off;
+}
+
+static int hidma_ll_reset(struct hidma_lldev *lldev)
+{
+	u32 val;
+	int ret;
+
+	val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+	val = val & ~(CH_CONTROL_MASK << 16);
+	val = val | (CH_RESET << 16);
+	writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+	/*
+	 * Delay 10ms after reset to allow DMA logic to quiesce.
+	 * Do a polled read up to 1ms and 10ms maximum.
+	 */
+	ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+		(((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_DISABLED),
+		1000, 10000);
+	if (ret) {
+		dev_err(lldev->dev,
+			"transfer channel did not reset\n");
+		return ret;
+	}
+
+	val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+	val = val & ~(CH_CONTROL_MASK << 16);
+	val = val | (CH_RESET << 16);
+	writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+	/*
+	 * Delay 10ms after reset to allow DMA logic to quiesce.
+	 * Do a polled read up to 1ms and 10ms maximum.
+	 */
+	ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+		(((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_DISABLED),
+		1000, 10000);
+	if (ret)
+		return ret;
+
+	lldev->trch_state = CH_DISABLED;
+	lldev->evch_state = CH_DISABLED;
+	return 0;
+}
+
+static void hidma_ll_enable_irq(struct hidma_lldev *lldev, u32 irq_bits)
+{
+	writel(irq_bits, lldev->evca + EVCA_IRQ_EN_OFFSET);
+	dev_dbg(lldev->dev, "enableirq\n");
+}
+
+/*
+ * The interrupt handler for HIDMA will try to consume as many pending
+ * EVRE from the event queue as possible. Each EVRE has an associated
+ * TRE that holds the user interface parameters. EVRE reports the
+ * result of the transaction. Hardware guarantees ordering between EVREs
+ * and TREs. We use last processed offset to figure out which TRE is
+ * associated with which EVRE. If two TREs are consumed by HW, the EVREs
+ * are in order in the event ring.
+ *
+ * This handler will do a one pass for consuming EVREs. Other EVREs may
+ * be delivered while we are working. It will try to consume incoming
+ * EVREs one more time and return.
+ *
+ * For unprocessed EVREs, hardware will trigger another interrupt until
+ * all the interrupt bits are cleared.
+ *
+ * Hardware guarantees that by the time interrupt is observed, all data
+ * transactions in flight are delivered to their respective places and
+ * are visible to the CPU.
+ *
+ * On demand paging for IOMMU is only supported for PCIe via PRI
+ * (Page Request Interface) not for HIDMA. All other hardware instances
+ * including HIDMA work on pinned DMA addresses.
+ *
+ * HIDMA is not aware of IOMMU presence since it follows the DMA API. All
+ * IOMMU latency will be built into the data movement time. By the time
+ * interrupt happens, IOMMU lookups + data movement has already taken place.
+ *
+ * While the first read in a typical PCI endpoint ISR flushes all outstanding
+ * requests traditionally to the destination, this concept does not apply
+ * here for this HW.
+ */
+static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev)
+{
+	u32 status;
+	u32 enable;
+	u32 cause;
+	int repeat = 2;
+	unsigned long timeout;
+
+	/*
+	 * Fine tuned for this HW...
+	 *
+	 * This ISR has been designed for this particular hardware. Relaxed read
+	 * and write accessors are used for performance reasons due to interrupt
+	 * delivery guarantees. Do not copy this code blindly and expect
+	 * that to work.
+	 */
+	status = readl_relaxed(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+	enable = readl_relaxed(lldev->evca + EVCA_IRQ_EN_OFFSET);
+	cause = status & enable;
+
+	if ((cause & (BIT(IRQ_TR_CH_INVALID_TRE_BIT_POS))) ||
+			(cause & BIT(IRQ_TR_CH_TRE_RD_RSP_ER_BIT_POS)) ||
+			(cause & BIT(IRQ_EV_CH_WR_RESP_BIT_POS)) ||
+			(cause & BIT(IRQ_TR_CH_DATA_RD_ER_BIT_POS)) ||
+			(cause & BIT(IRQ_TR_CH_DATA_WR_ER_BIT_POS))) {
+		u8 err_code = EVRE_STATUS_ERROR;
+		u8 err_info = 0xFF;
+
+		/* Clear out pending interrupts */
+		writel(cause, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+		dev_err(lldev->dev,
+			"error 0x%x, resetting...\n", cause);
+
+		hidma_cleanup_pending_tre(lldev, err_info, err_code);
+
+		/* reset the channel for recovery */
+		if (hidma_ll_setup(lldev)) {
+			dev_err(lldev->dev,
+				"channel reinitialize failed after error\n");
+			return;
+		}
+		hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+		return;
+	}
+
+	/*
+	 * Try to consume as many EVREs as possible.
+	 * skip this loop if the interrupt is spurious.
+	 */
+	while (cause && repeat) {
+		unsigned long start = jiffies;
+
+		/* This timeout should be sufficent for core to finish */
+		timeout = start + msecs_to_jiffies(500);
+
+		while (lldev->pending_tre_count) {
+			hidma_handle_tre_completion(lldev);
+			if (time_is_before_jiffies(timeout)) {
+				dev_warn(lldev->dev,
+					"ISR timeout %lx-%lx from %lx [%d]\n",
+					jiffies, timeout, start,
+					lldev->pending_tre_count);
+				break;
+			}
+		}
+
+		/* We consumed TREs or there are pending TREs or EVREs. */
+		writel_relaxed(cause, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+		/*
+		 * Another interrupt might have arrived while we are
+		 * processing this one. Read the new cause.
+		 */
+		status = readl_relaxed(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+		enable = readl_relaxed(lldev->evca + EVCA_IRQ_EN_OFFSET);
+		cause = status & enable;
+
+		repeat--;
+	}
+}
+
+
+static int hidma_ll_enable(struct hidma_lldev *lldev)
+{
+	u32 val;
+	int ret;
+
+	val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+	val &= ~(CH_CONTROL_MASK << 16);
+	val |= (CH_ENABLE << 16);
+	writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+	ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+		((((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_ENABLED) ||
+		(((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_RUNNING)),
+		1000, 10000);
+	if (ret) {
+		dev_err(lldev->dev,
+			"event channel did not get enabled\n");
+		return ret;
+	}
+
+	val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+	val = val & ~(CH_CONTROL_MASK << 16);
+	val = val | (CH_ENABLE << 16);
+	writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+	ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+		((((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_ENABLED) ||
+		(((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_RUNNING)),
+		1000, 10000);
+	if (ret) {
+		dev_err(lldev->dev,
+			"transfer channel did not get enabled\n");
+		return ret;
+	}
+
+	lldev->trch_state = CH_ENABLED;
+	lldev->evch_state = CH_ENABLED;
+
+	return 0;
+}
+
+int hidma_ll_resume(struct hidma_lldev *lldev)
+{
+	return hidma_ll_enable(lldev);
+}
+
+static int hidma_ll_hw_start(struct hidma_lldev *lldev)
+{
+	int rc = 0;
+	unsigned long irqflags;
+
+	spin_lock_irqsave(&lldev->lock, irqflags);
+	writel(lldev->tre_write_offset, lldev->trca + TRCA_DOORBELL_OFFSET);
+	spin_unlock_irqrestore(&lldev->lock, irqflags);
+
+	return rc;
+}
+
+bool hidma_ll_isenabled(struct hidma_lldev *lldev)
+{
+	u32 val;
+
+	val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+	lldev->trch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+	val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+	lldev->evch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+
+	/* both channels have to be enabled before calling this function*/
+	if (((lldev->trch_state == CH_ENABLED) ||
+		(lldev->trch_state == CH_RUNNING)) &&
+		((lldev->evch_state == CH_ENABLED) ||
+			(lldev->evch_state == CH_RUNNING)))
+		return true;
+
+	dev_dbg(lldev->dev, "channels are not enabled or are in error state");
+	return false;
+}
+
+int hidma_ll_queue_request(struct hidma_lldev *lldev, u32 tre_ch)
+{
+	struct hidma_tre *tre;
+	int rc = 0;
+	unsigned long flags;
+
+	tre = &lldev->trepool[tre_ch];
+
+	/* copy the TRE into its location in the TRE ring */
+	spin_lock_irqsave(&lldev->lock, flags);
+	tre->tre_index = lldev->tre_write_offset / TRE_SIZE;
+	lldev->pending_tre_list[tre->tre_index] = tre;
+	memcpy(lldev->tre_ring + lldev->tre_write_offset, &tre->tre_local[0],
+		TRE_SIZE);
+	lldev->tx_status_list[tre->chidx].err_code = 0;
+	lldev->tx_status_list[tre->chidx].err_info = 0;
+	tre->queued = 1;
+	lldev->pending_tre_count++;
+	lldev->tre_write_offset = (lldev->tre_write_offset + TRE_SIZE)
+				% lldev->tre_ring_size;
+	spin_unlock_irqrestore(&lldev->lock, flags);
+	return rc;
+}
+
+int hidma_ll_start(struct hidma_lldev *lldev)
+{
+	return hidma_ll_hw_start(lldev);
+}
+
+/*
+ * Note that even though we stop this channel
+ * if there is a pending transaction in flight
+ * it will complete and follow the callback.
+ * This request will prevent further requests
+ * to be made.
+ */
+int hidma_ll_pause(struct hidma_lldev *lldev)
+{
+	u32 val;
+	int ret;
+
+	val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+	lldev->evch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+	val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+	lldev->trch_state = (val >> CH_STATE_BIT_POS) & CH_STATE_MASK;
+
+	/* already suspended by this OS */
+	if ((lldev->trch_state == CH_SUSPENDED) ||
+		(lldev->evch_state == CH_SUSPENDED))
+		return 0;
+
+	/* already stopped by the manager */
+	if ((lldev->trch_state == CH_STOPPED) ||
+		(lldev->evch_state == CH_STOPPED))
+		return 0;
+
+	val = readl(lldev->trca + TRCA_CTRLSTS_OFFSET);
+	val = val & ~(CH_CONTROL_MASK << 16);
+	val = val | (CH_SUSPEND << 16);
+	writel(val, lldev->trca + TRCA_CTRLSTS_OFFSET);
+
+	/*
+	 * Start the wait right after the suspend is confirmed.
+	 * Do a polled read up to 1ms and 10ms maximum.
+	 */
+	ret = readl_poll_timeout(lldev->trca + TRCA_CTRLSTS_OFFSET, val,
+		(((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_SUSPENDED),
+		1000, 10000);
+	if (ret)
+		return ret;
+
+	val = readl(lldev->evca + EVCA_CTRLSTS_OFFSET);
+	val = val & ~(CH_CONTROL_MASK << 16);
+	val = val | (CH_SUSPEND << 16);
+	writel(val, lldev->evca + EVCA_CTRLSTS_OFFSET);
+
+	/*
+	 * Start the wait right after the suspend is confirmed
+	 * Delay up to 10ms after reset to allow DMA logic to quiesce.
+	 */
+	ret = readl_poll_timeout(lldev->evca + EVCA_CTRLSTS_OFFSET, val,
+		(((val >> CH_STATE_BIT_POS) & CH_STATE_MASK) == CH_SUSPENDED),
+		1000, 10000);
+	if (ret)
+		return ret;
+
+	lldev->trch_state = CH_SUSPENDED;
+	lldev->evch_state = CH_SUSPENDED;
+	dev_dbg(lldev->dev, "stop\n");
+
+	return 0;
+}
+
+void hidma_ll_set_transfer_params(struct hidma_lldev *lldev, u32 tre_ch,
+	dma_addr_t src, dma_addr_t dest, u32 len, u32 flags)
+{
+	struct hidma_tre *tre;
+	u32 *tre_local;
+
+	if (tre_ch >= lldev->nr_tres) {
+		dev_err(lldev->dev,
+			"invalid TRE number in transfer params:%d", tre_ch);
+		return;
+	}
+
+	tre = &lldev->trepool[tre_ch];
+	if (atomic_read(&tre->allocated) != true) {
+		dev_err(lldev->dev,
+			"trying to set params on an unused TRE:%d", tre_ch);
+		return;
+	}
+
+	tre_local = &tre->tre_local[0];
+	tre_local[TRE_LEN_IDX] = len;
+	tre_local[TRE_SRC_LOW_IDX] = lower_32_bits(src);
+	tre_local[TRE_SRC_HI_IDX] = upper_32_bits(src);
+	tre_local[TRE_DEST_LOW_IDX] = lower_32_bits(dest);
+	tre_local[TRE_DEST_HI_IDX] = upper_32_bits(dest);
+	tre->int_flags = flags;
+
+	dev_dbg(lldev->dev, "transferparams: tre_ch:%d %pap->%pap len:%u\n",
+		tre_ch, &src, &dest, len);
+}
+
+/*
+ * Called during initialization and after an error condition
+ * to restore hardware state.
+ */
+int hidma_ll_setup(struct hidma_lldev *lldev)
+{
+	int rc;
+	u64 addr;
+	u32 val;
+	u32 nr_tres = lldev->nr_tres;
+
+	lldev->pending_tre_count = 0;
+	lldev->tre_processed_off = 0;
+	lldev->evre_processed_off = 0;
+	lldev->tre_write_offset = 0;
+
+	/* disable interrupts */
+	hidma_ll_enable_irq(lldev, 0);
+
+	/* clear all pending interrupts */
+	val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+	writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+	rc = hidma_ll_reset(lldev);
+	if (rc)
+		return rc;
+
+	/*
+	 * Clear all pending interrupts again.
+	 * Otherwise, we observe reset complete interrupts.
+	 */
+	val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+	writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+
+	/* disable interrupts again after reset */
+	hidma_ll_enable_irq(lldev, 0);
+
+	addr = lldev->tre_ring_handle;
+	writel(lower_32_bits(addr), lldev->trca + TRCA_RING_LOW_OFFSET);
+	writel(upper_32_bits(addr), lldev->trca + TRCA_RING_HIGH_OFFSET);
+	writel(lldev->tre_ring_size, lldev->trca + TRCA_RING_LEN_OFFSET);
+
+	addr = lldev->evre_ring_handle;
+	writel(lower_32_bits(addr), lldev->evca + EVCA_RING_LOW_OFFSET);
+	writel(upper_32_bits(addr), lldev->evca + EVCA_RING_HIGH_OFFSET);
+	writel(EVRE_SIZE * nr_tres, lldev->evca + EVCA_RING_LEN_OFFSET);
+
+	/* support IRQ only for now */
+	val = readl(lldev->evca + EVCA_INTCTRL_OFFSET);
+	val = val & ~(0xF);
+	val = val | 0x1;
+	writel(val, lldev->evca + EVCA_INTCTRL_OFFSET);
+
+	/* clear all pending interrupts and enable them*/
+	writel(ENABLE_IRQS, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+	hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+
+	rc = hidma_ll_enable(lldev);
+	if (rc)
+		return rc;
+
+	return rc;
+}
+
+struct hidma_lldev *hidma_ll_init(struct device *dev, u32 nr_tres,
+			void __iomem *trca, void __iomem *evca,
+			u8 evridx)
+{
+	u32 required_bytes;
+	struct hidma_lldev *lldev;
+	int rc;
+
+	if (!trca || !evca || !dev || !nr_tres)
+		return NULL;
+
+	/* need at least four TREs */
+	if (nr_tres < 4)
+		return NULL;
+
+	/* need an extra space */
+	nr_tres += 1;
+
+	lldev = devm_kzalloc(dev, sizeof(struct hidma_lldev), GFP_KERNEL);
+	if (!lldev)
+		return NULL;
+
+	lldev->evca = evca;
+	lldev->trca = trca;
+	lldev->dev = dev;
+	required_bytes = sizeof(struct hidma_tre) * nr_tres;
+	lldev->trepool = devm_kzalloc(lldev->dev, required_bytes, GFP_KERNEL);
+	if (!lldev->trepool)
+		return NULL;
+
+	required_bytes = sizeof(lldev->pending_tre_list[0]) * nr_tres;
+	lldev->pending_tre_list = devm_kzalloc(dev, required_bytes,
+					GFP_KERNEL);
+	if (!lldev->pending_tre_list)
+		return NULL;
+
+	required_bytes = sizeof(lldev->tx_status_list[0]) * nr_tres;
+	lldev->tx_status_list = devm_kzalloc(dev, required_bytes, GFP_KERNEL);
+	if (!lldev->tx_status_list)
+		return NULL;
+
+	lldev->tre_ring = dmam_alloc_coherent(dev, (TRE_SIZE + 1) * nr_tres,
+					&lldev->tre_ring_handle, GFP_KERNEL);
+	if (!lldev->tre_ring)
+		return NULL;
+
+	memset(lldev->tre_ring, 0, (TRE_SIZE + 1) * nr_tres);
+	lldev->tre_ring_size = TRE_SIZE * nr_tres;
+	lldev->nr_tres = nr_tres;
+
+	/* the TRE ring has to be TRE_SIZE aligned */
+	if (!IS_ALIGNED(lldev->tre_ring_handle, TRE_SIZE)) {
+		u8  tre_ring_shift;
+
+		tre_ring_shift = lldev->tre_ring_handle % TRE_SIZE;
+		tre_ring_shift = TRE_SIZE - tre_ring_shift;
+		lldev->tre_ring_handle += tre_ring_shift;
+		lldev->tre_ring += tre_ring_shift;
+	}
+
+	lldev->evre_ring = dmam_alloc_coherent(dev, (EVRE_SIZE + 1) * nr_tres,
+					&lldev->evre_ring_handle, GFP_KERNEL);
+	if (!lldev->evre_ring)
+		return NULL;
+
+	memset(lldev->evre_ring, 0, (EVRE_SIZE + 1) * nr_tres);
+	lldev->evre_ring_size = EVRE_SIZE * nr_tres;
+
+	/* the EVRE ring has to be EVRE_SIZE aligned */
+	if (!IS_ALIGNED(lldev->evre_ring_handle, EVRE_SIZE)) {
+		u8  evre_ring_shift;
+
+		evre_ring_shift = lldev->evre_ring_handle % EVRE_SIZE;
+		evre_ring_shift = EVRE_SIZE - evre_ring_shift;
+		lldev->evre_ring_handle += evre_ring_shift;
+		lldev->evre_ring += evre_ring_shift;
+	}
+	lldev->nr_tres = nr_tres;
+	lldev->evridx = evridx;
+
+	rc = kfifo_alloc(&lldev->handoff_fifo,
+		nr_tres * sizeof(struct hidma_tre *), GFP_KERNEL);
+	if (rc)
+		return NULL;
+
+	rc = hidma_ll_setup(lldev);
+	if (rc)
+		return NULL;
+
+	spin_lock_init(&lldev->lock);
+	tasklet_init(&lldev->task, hidma_ll_tre_complete,
+			(unsigned long)lldev);
+	lldev->initialized = 1;
+	hidma_ll_enable_irq(lldev, ENABLE_IRQS);
+	return lldev;
+}
+
+int hidma_ll_uninit(struct hidma_lldev *lldev)
+{
+	int rc = 0;
+	u32 val;
+
+	if (!lldev)
+		return -ENODEV;
+
+	if (lldev->initialized) {
+		u32 required_bytes;
+
+		lldev->initialized = 0;
+
+		required_bytes = sizeof(struct hidma_tre) * lldev->nr_tres;
+		tasklet_kill(&lldev->task);
+		memset(lldev->trepool, 0, required_bytes);
+		lldev->trepool = NULL;
+		lldev->pending_tre_count = 0;
+		lldev->tre_write_offset = 0;
+
+		rc = hidma_ll_reset(lldev);
+
+		/*
+		 * Clear all pending interrupts again.
+		 * Otherwise, we observe reset complete interrupts.
+		 */
+		val = readl(lldev->evca + EVCA_IRQ_STAT_OFFSET);
+		writel(val, lldev->evca + EVCA_IRQ_CLR_OFFSET);
+		hidma_ll_enable_irq(lldev, 0);
+	}
+	return rc;
+}
+
+irqreturn_t hidma_ll_inthandler(int chirq, void *arg)
+{
+	struct hidma_lldev *lldev = arg;
+
+	hidma_ll_int_handler_internal(lldev);
+	return IRQ_HANDLED;
+}
+
+enum dma_status hidma_ll_status(struct hidma_lldev *lldev, u32 tre_ch)
+{
+	enum dma_status ret = DMA_ERROR;
+	unsigned long flags;
+	u8 err_code;
+
+	spin_lock_irqsave(&lldev->lock, flags);
+	err_code = lldev->tx_status_list[tre_ch].err_code;
+
+	if (err_code & EVRE_STATUS_COMPLETE)
+		ret = DMA_COMPLETE;
+	else if (err_code & EVRE_STATUS_ERROR)
+		ret = DMA_ERROR;
+	else
+		ret = DMA_IN_PROGRESS;
+	spin_unlock_irqrestore(&lldev->lock, flags);
+
+	return ret;
+}