| Message ID | 1445267270-23126-2-git-send-email-Liviu.Dudau@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Oct 19, 2015 at 04:07:47PM +0100, Liviu Dudau wrote: > A lot of component based DRM drivers use a variant of the same code > as the probe function. They bind the crtc ports in the first iteration > and then scan through the child nodes and bind the encoders attached > to the remote endpoints. Factor the common code into a separate > function called drm_of_component_probe() in order to increase code > reuse. Thanks, this now looks perfect. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Liviu Dudau <Liviu.Dudau@arm.com> writes: > A lot of component based DRM drivers use a variant of the same code > as the probe function. They bind the crtc ports in the first iteration > and then scan through the child nodes and bind the encoders attached > to the remote endpoints. Factor the common code into a separate > function called drm_of_component_probe() in order to increase code > reuse. > > Cc: David Airlie <airlied@linux.ie> > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: Eric Anholt <eric@anholt.net> I'm unimpressed with of-graph, but this will really help me in trying it out for vc4.
On 2015?10?19? 23:07, Liviu Dudau wrote: > A lot of component based DRM drivers use a variant of the same code > as the probe function. They bind the crtc ports in the first iteration > and then scan through the child nodes and bind the encoders attached > to the remote endpoints. Factor the common code into a separate > function called drm_of_component_probe() in order to increase code > reuse. > > Cc: David Airlie <airlied@linux.ie> > Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> > --- > drivers/gpu/drm/drm_of.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++ > include/drm/drm_of.h | 13 +++++++ > 2 files changed, 101 insertions(+) > > diff --git a/drivers/gpu/drm/drm_of.c b/drivers/gpu/drm/drm_of.c > index be38840..493c05c 100644 > --- a/drivers/gpu/drm/drm_of.c > +++ b/drivers/gpu/drm/drm_of.c > @@ -1,3 +1,4 @@ > +#include <linux/component.h> > #include <linux/export.h> > #include <linux/list.h> > #include <linux/of_graph.h> > @@ -61,3 +62,90 @@ uint32_t drm_of_find_possible_crtcs(struct drm_device *dev, > return possible_crtcs; > } > EXPORT_SYMBOL(drm_of_find_possible_crtcs); > + > +/** > + * drm_of_component_probe - Generic probe function for a component based master > + * @dev: master device containing the OF node > + * @compare_of: compare function used for matching components > + * @master_ops: component master ops to be used > + * > + * Parse the platform device OF node and bind all the components associated > + * with the master. Interface ports are added before the encoders in order to > + * satisfy their .bind requirements > + * See Documentation/devicetree/bindings/graph.txt for the bindings. > + * > + * Returns zero if successful, or one of the standard error codes if it fails. > + */ > +int drm_of_component_probe(struct device *dev, > + int (*compare_of)(struct device *, void *), > + const struct component_master_ops *m_ops) > +{ > + struct device_node *ep, *port, *remote; > + struct component_match *match = NULL; > + int i; > + > + if (!dev->of_node) > + return -EINVAL; > + > + /* > + * Bind the crtc's ports first, so that drm_of_find_possible_crtcs() > + * called from encoder's .bind callbacks works as expected > + */ > + for (i = 0; ; i++) { > + port = of_parse_phandle(dev->of_node, "ports", i); > + if (!port) > + break; > + > + if (!of_device_is_available(port->parent)) { > + of_node_put(port); > + continue; > + } > + > + component_match_add(dev, &match, compare_of, port); Hi Liviu Rockchip drm can't work with drm_of_component_probe function now, At drm_of_component_probe: component_match_add(dev, &match, compare_of, port); And original rockchip drm use: component_match_add(dev, &match, compare_of, port->parent); That different "port" and "port->parent" cause crtc device node always mis-match. I'm confused that rockchip use same dts node map as imx drm driver, but it works for imx drm, not work on rockchip drm. > + of_node_put(port); > + } > -- ?ark Yao
On Mon, Nov 09, 2015 at 05:39:25PM +0800, Mark yao wrote: > On 2015?10?19? 23:07, Liviu Dudau wrote: > >A lot of component based DRM drivers use a variant of the same code > >as the probe function. They bind the crtc ports in the first iteration > >and then scan through the child nodes and bind the encoders attached > >to the remote endpoints. Factor the common code into a separate > >function called drm_of_component_probe() in order to increase code > >reuse. > > > >Cc: David Airlie <airlied@linux.ie> > >Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> > >--- > > drivers/gpu/drm/drm_of.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++ > > include/drm/drm_of.h | 13 +++++++ > > 2 files changed, 101 insertions(+) > > > >diff --git a/drivers/gpu/drm/drm_of.c b/drivers/gpu/drm/drm_of.c > >index be38840..493c05c 100644 > >--- a/drivers/gpu/drm/drm_of.c > >+++ b/drivers/gpu/drm/drm_of.c > >@@ -1,3 +1,4 @@ > >+#include <linux/component.h> > > #include <linux/export.h> > > #include <linux/list.h> > > #include <linux/of_graph.h> > >@@ -61,3 +62,90 @@ uint32_t drm_of_find_possible_crtcs(struct drm_device *dev, > > return possible_crtcs; > > } > > EXPORT_SYMBOL(drm_of_find_possible_crtcs); > >+ > >+/** > >+ * drm_of_component_probe - Generic probe function for a component based master > >+ * @dev: master device containing the OF node > >+ * @compare_of: compare function used for matching components > >+ * @master_ops: component master ops to be used > >+ * > >+ * Parse the platform device OF node and bind all the components associated > >+ * with the master. Interface ports are added before the encoders in order to > >+ * satisfy their .bind requirements > >+ * See Documentation/devicetree/bindings/graph.txt for the bindings. > >+ * > >+ * Returns zero if successful, or one of the standard error codes if it fails. > >+ */ > >+int drm_of_component_probe(struct device *dev, > >+ int (*compare_of)(struct device *, void *), > >+ const struct component_master_ops *m_ops) > >+{ > >+ struct device_node *ep, *port, *remote; > >+ struct component_match *match = NULL; > >+ int i; > >+ > >+ if (!dev->of_node) > >+ return -EINVAL; > >+ > >+ /* > >+ * Bind the crtc's ports first, so that drm_of_find_possible_crtcs() > >+ * called from encoder's .bind callbacks works as expected > >+ */ > >+ for (i = 0; ; i++) { > >+ port = of_parse_phandle(dev->of_node, "ports", i); > >+ if (!port) > >+ break; > >+ > >+ if (!of_device_is_available(port->parent)) { > >+ of_node_put(port); > >+ continue; > >+ } > >+ > >+ component_match_add(dev, &match, compare_of, port); > Hi Liviu > Rockchip drm can't work with drm_of_component_probe function now, > > At drm_of_component_probe: > component_match_add(dev, &match, compare_of, port); > And original rockchip drm use: > component_match_add(dev, &match, compare_of, port->parent); > > That different "port" and "port->parent" cause crtc device node always > mis-match. > > I'm confused that rockchip use same dts node map as imx drm driver, but > it works > for imx drm, not work on rockchip drm. Hi Mark, I'm (slightly) confused as well. The drivers are different so there must be a reason to account for the different behaviour. Unfortunately I don't have a Rockchip based platform ready for testing, so I would appreciate if you could add some debugging messages to drm_of_component_probe() when component_match_add is being called and compare that with the version before my patch. Best regards, Liviu > > >+ of_node_put(port); > >+ } > > > -- ?ark Yao > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Mon, Oct 19, 2015 at 04:07:47PM +0100, Liviu Dudau wrote: > A lot of component based DRM drivers use a variant of the same code > as the probe function. They bind the crtc ports in the first iteration > and then scan through the child nodes and bind the encoders attached > to the remote endpoints. Factor the common code into a separate > function called drm_of_component_probe() in order to increase code > reuse. Sorry, I take back my Acked-by. > + /* > + * Bind the crtc's ports first, so that drm_of_find_possible_crtcs() > + * called from encoder's .bind callbacks works as expected > + */ > + for (i = 0; ; i++) { > + port = of_parse_phandle(dev->of_node, "ports", i); > + if (!port) > + break; > + > + if (!of_device_is_available(port->parent)) { > + of_node_put(port); > + continue; > + } > + > + component_match_add(dev, &match, compare_of, port); > + of_node_put(port); We shouldn't be putting the ports here - we're still retaining a reference against the port, even though it's by address. Yes, we have no way to release this reference, which probably ought to be fixed. Please replace this of_node_put() here with a comment to that effect. > + for_each_child_of_node(port, ep) { > + remote = of_graph_get_remote_port_parent(ep); > + if (!remote || !of_device_is_available(remote)) { > + of_node_put(remote); > + continue; > + } else if (!of_device_is_available(remote->parent)) { > + dev_warn(dev, "parent device of %s is not available\n", > + remote->full_name); > + of_node_put(remote); > + continue; > + } > + > + component_match_add(dev, &match, compare_of, remote); > + of_node_put(remote); Same here.
Am Montag, den 09.11.2015, 10:53 +0000 schrieb Liviu Dudau: > On Mon, Nov 09, 2015 at 05:39:25PM +0800, Mark yao wrote: > > On 2015?10?19? 23:07, Liviu Dudau wrote: > > >A lot of component based DRM drivers use a variant of the same code > > >as the probe function. They bind the crtc ports in the first iteration > > >and then scan through the child nodes and bind the encoders attached > > >to the remote endpoints. Factor the common code into a separate > > >function called drm_of_component_probe() in order to increase code > > >reuse. > > > > > >Cc: David Airlie <airlied@linux.ie> > > >Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> > > >--- > > > drivers/gpu/drm/drm_of.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++ > > > include/drm/drm_of.h | 13 +++++++ > > > 2 files changed, 101 insertions(+) > > > > > >diff --git a/drivers/gpu/drm/drm_of.c b/drivers/gpu/drm/drm_of.c > > >index be38840..493c05c 100644 > > >--- a/drivers/gpu/drm/drm_of.c > > >+++ b/drivers/gpu/drm/drm_of.c > > >@@ -1,3 +1,4 @@ > > >+#include <linux/component.h> > > > #include <linux/export.h> > > > #include <linux/list.h> > > > #include <linux/of_graph.h> > > >@@ -61,3 +62,90 @@ uint32_t drm_of_find_possible_crtcs(struct drm_device *dev, > > > return possible_crtcs; > > > } > > > EXPORT_SYMBOL(drm_of_find_possible_crtcs); > > >+ > > >+/** > > >+ * drm_of_component_probe - Generic probe function for a component based master > > >+ * @dev: master device containing the OF node > > >+ * @compare_of: compare function used for matching components > > >+ * @master_ops: component master ops to be used > > >+ * > > >+ * Parse the platform device OF node and bind all the components associated > > >+ * with the master. Interface ports are added before the encoders in order to > > >+ * satisfy their .bind requirements > > >+ * See Documentation/devicetree/bindings/graph.txt for the bindings. > > >+ * > > >+ * Returns zero if successful, or one of the standard error codes if it fails. > > >+ */ > > >+int drm_of_component_probe(struct device *dev, > > >+ int (*compare_of)(struct device *, void *), > > >+ const struct component_master_ops *m_ops) > > >+{ > > >+ struct device_node *ep, *port, *remote; > > >+ struct component_match *match = NULL; > > >+ int i; > > >+ > > >+ if (!dev->of_node) > > >+ return -EINVAL; > > >+ > > >+ /* > > >+ * Bind the crtc's ports first, so that drm_of_find_possible_crtcs() > > >+ * called from encoder's .bind callbacks works as expected > > >+ */ > > >+ for (i = 0; ; i++) { > > >+ port = of_parse_phandle(dev->of_node, "ports", i); > > >+ if (!port) > > >+ break; > > >+ > > >+ if (!of_device_is_available(port->parent)) { > > >+ of_node_put(port); > > >+ continue; > > >+ } > > >+ > > >+ component_match_add(dev, &match, compare_of, port); > > Hi Liviu > > Rockchip drm can't work with drm_of_component_probe function now, > > > > At drm_of_component_probe: > > component_match_add(dev, &match, compare_of, port); > > And original rockchip drm use: > > component_match_add(dev, &match, compare_of, port->parent); > > > > That different "port" and "port->parent" cause crtc device node always > > mis-match. > > > > I'm confused that rockchip use same dts node map as imx drm driver, but > > it works > > for imx drm, not work on rockchip drm. > > Hi Mark, > > I'm (slightly) confused as well. The drivers are different so there must be a reason > to account for the different behaviour. Unfortunately I don't have a Rockchip based > platform ready for testing, so I would appreciate if you could add some debugging > messages to drm_of_component_probe() when component_match_add is being called and > compare that with the version before my patch. The reason is that rockchip has device tree probed devices that contain the ports, but on imx crtc devices are platform devices created by the driver, which don't have their own device tree node. They are associated with the port nodes directly in ipu_drm_probe (ipuv3-crtc.c). regards Philipp
On Mon, Nov 09, 2015 at 05:39:25PM +0800, Mark yao wrote: > Hi Liviu > Rockchip drm can't work with drm_of_component_probe function now, > > At drm_of_component_probe: > component_match_add(dev, &match, compare_of, port); > And original rockchip drm use: > component_match_add(dev, &match, compare_of, port->parent); > > That different "port" and "port->parent" cause crtc device node always > mis-match. > > I'm confused that rockchip use same dts node map as imx drm driver, but > it works > for imx drm, not work on rockchip drm. iMX is rather confusing because the whole device is rather complex. It's a complete image processor unit, which has multiple functions within a single device. It's a less than perfect example of how to deal with these issues (each time I look at it, I find more stuff it shouldn't be doing... like what I've found today.) Basically, the device is declared in DT as: ipu1: ipu@02400000 { compatible = "fsl,imx6q-ipu"; ipu1_csi0: port@0 { ... }; ipu1_csi1: port@1 { ... }; ipu1_di0: port@2 { ... }; ipu1_di1: port@3 { ... }; }; ipu1 is the platform device, which is the _entire_ IPU device, containing multiple sub-devices - eg, two camera interfaces (csi) and two "CRTCs" (di). The ipuv3 code creates platform devices for these, calling the CSI devices "imx-ipuv3-camera" and the DI devices "imx-ipuv3-crtc". Initially, these have no of_node attached (yuck!) but later have an of_node attached when the device is probed (yuck yuck yuck!) by ipu_drm_probe() - the of_node being the ipu1_di0 or ipu1_di1 node. The display-subsystem property references these ipu1_di0/ipu1_di1 nodes: display-subsystem { compatible = "fsl,imx-display-subsystem"; ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; }; and so finds the "imx-ipuv3-crtc" platform devices rather than the parent ipu1 device. It's not nice - I'd like to see this: if (!dev->of_node) { /* Associate crtc device with the corresponding DI port node */ dev->of_node = ipu_drm_get_port_by_id(dev->parent->of_node, pdata->di + 2); if (!dev->of_node) { dev_err(dev, "missing port@%d node in %s\n", pdata->di + 2, dev->parent->of_node->full_name); return -ENODEV; } } moved out of drivers/gpu/drm/imx/ipuv3-crtc.c and into drivers/gpu/ipu-v3/ipu-common.c where the platform devices are created so that we're only setting device of_node pointers at device creation time and not randomly during the probe sequence, even though the above is "safe" as far as the component helper's concerned. There's no reason why it can't be done at the device creation time. Now, as to how to handle the differences here, I think a solution would be to pass in two compare_of function pointers: one for CRTCs and one for the encoders, since the two will need to be handled separately depending on the implementation. Where you have one "parent" device of the CRTC node containing exactly one CRTC, then the "rockchip" method makes sense - though comparing the parent of the port node in CRTC compare_of would be where I'd put it. If you have multiple CRTCs within one parent device, then something more complex like the iMX solution would be required. In any case, passing port->parent is a data loss in the generic case: you lose the information in the compare_of function about exactly which port is required, so that must go into the CRTC compare_of. So... rockchip's CRTC compare_of() should be: static int crtc_compare_of(struct device *dev, void *data) { struct device_node *np = data; return dev->of_node == np->parent; } and it should have an encoder_compare_of() which is its existing compare_of() renamed as such. Then, we need drm_of_component_probe() to take _two_ comparison functions, one for the CRTCs and one for the encoders.
On Mon, Nov 09, 2015 at 11:43:00AM +0000, Russell King - ARM Linux wrote: > On Mon, Nov 09, 2015 at 05:39:25PM +0800, Mark yao wrote: > > Hi Liviu > > Rockchip drm can't work with drm_of_component_probe function now, > > > > At drm_of_component_probe: > > component_match_add(dev, &match, compare_of, port); > > And original rockchip drm use: > > component_match_add(dev, &match, compare_of, port->parent); > > > > That different "port" and "port->parent" cause crtc device node always > > mis-match. > > > > I'm confused that rockchip use same dts node map as imx drm driver, but > > it works > > for imx drm, not work on rockchip drm. > > iMX is rather confusing because the whole device is rather complex. It's > a complete image processor unit, which has multiple functions within a > single device. It's a less than perfect example of how to deal with > these issues (each time I look at it, I find more stuff it shouldn't be > doing... like what I've found today.) > > Basically, the device is declared in DT as: > > ipu1: ipu@02400000 { > compatible = "fsl,imx6q-ipu"; > ipu1_csi0: port@0 { > ... > }; > ipu1_csi1: port@1 { > ... > }; > ipu1_di0: port@2 { > ... > }; > ipu1_di1: port@3 { > ... > }; > }; > > ipu1 is the platform device, which is the _entire_ IPU device, containing > multiple sub-devices - eg, two camera interfaces (csi) and two "CRTCs" > (di). > > The ipuv3 code creates platform devices for these, calling the CSI > devices "imx-ipuv3-camera" and the DI devices "imx-ipuv3-crtc". > Initially, these have no of_node attached (yuck!) but later have an > of_node attached when the device is probed (yuck yuck yuck!) by > ipu_drm_probe() - the of_node being the ipu1_di0 or ipu1_di1 node. > > The display-subsystem property references these ipu1_di0/ipu1_di1 nodes: > > display-subsystem { > compatible = "fsl,imx-display-subsystem"; > ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>; > }; > > and so finds the "imx-ipuv3-crtc" platform devices rather than the > parent ipu1 device. > > It's not nice - I'd like to see this: > > if (!dev->of_node) { > /* Associate crtc device with the corresponding DI port node */ > dev->of_node = ipu_drm_get_port_by_id(dev->parent->of_node, > pdata->di + 2); > if (!dev->of_node) { > dev_err(dev, "missing port@%d node in %s\n", > pdata->di + 2, dev->parent->of_node->full_name); return -ENODEV; > } > } > > moved out of drivers/gpu/drm/imx/ipuv3-crtc.c and into > drivers/gpu/ipu-v3/ipu-common.c where the platform devices are created > so that we're only setting device of_node pointers at device creation > time and not randomly during the probe sequence, even though the above > is "safe" as far as the component helper's concerned. There's no reason > why it can't be done at the device creation time. Hi Russell, Thanks for your analysis, I keep delaying looking into the imx code more seriously even if I have a SabreLite board that I could play with (not on my day-to-day list of tasks). > > Now, as to how to handle the differences here, I think a solution would > be to pass in two compare_of function pointers: one for CRTCs and one > for the encoders, since the two will need to be handled separately > depending on the implementation. Where you have one "parent" device of > the CRTC node containing exactly one CRTC, then the "rockchip" method > makes sense - though comparing the parent of the port node in > CRTC compare_of would be where I'd put it. If you have multiple > CRTCs within one parent device, then something more complex like the > iMX solution would be required. > > In any case, passing port->parent is a data loss in the generic case: > you lose the information in the compare_of function about exactly which > port is required, so that must go into the CRTC compare_of. > > So... > > rockchip's CRTC compare_of() should be: > > static int crtc_compare_of(struct device *dev, void *data) > { > struct device_node *np = data; > > return dev->of_node == np->parent; > } > > and it should have an encoder_compare_of() which is its existing > compare_of() renamed as such. > > Then, we need drm_of_component_probe() to take _two_ comparison > functions, one for the CRTCs and one for the encoders. This hits very close to my experience. After sending this patchset I started converting my HDLCD driver to use it and hit exactly the same issue, that the same compare function is used for selecting CRTCs and encoders. My hardware is even simpler, with one CRTC connected to only one encoder. My board has two of each but the only link between CRTCs is the fact that they are fed most of the time from the same clock source. In the end I've backed out of using the drm_of_component_probe() code as it meant I've had to modify the device tree in a way that did no longer describe the hardware accurately. I will have another look this week if I can extend the function and make it work for all cases. Meanwhile, what is your suggestion regarding the patchset. I've seen David has sent Linus a pull request for 4.4-rc1 that includes it. Should we send a revert for rockchip commit and then patch later the function? Best regards, Liviu > > -- > FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up > according to speedtest.net. >
On Mon, Nov 09, 2015 at 11:57:27AM +0000, Liviu Dudau wrote: > Meanwhile, what is your suggestion regarding the patchset. I've seen David has > sent Linus a pull request for 4.4-rc1 that includes it. Should we send a > revert for rockchip commit and then patch later the function? It definitely needs to be fixed, and I'd suggest its early enough in the -rc cycle (which hasn't begun yet) to simply fix drm_of_component_probe() to take two compare functions. I'd also suggest at this point another change: please rename it to drm_of_kms_component_probe() since this is only a generic case for KMS drivers. GPU DRM drivers need something different.
On Mon, Nov 09, 2015 at 12:03:35PM +0000, Russell King - ARM Linux wrote: > On Mon, Nov 09, 2015 at 11:57:27AM +0000, Liviu Dudau wrote: > > Meanwhile, what is your suggestion regarding the patchset. I've seen David has > > sent Linus a pull request for 4.4-rc1 that includes it. Should we send a > > revert for rockchip commit and then patch later the function? > > It definitely needs to be fixed, and I'd suggest its early enough in the > -rc cycle (which hasn't begun yet) to simply fix drm_of_component_probe() > to take two compare functions. I still don't have a Rockchip board to test the patch, so I need to find out someone willing to test them. Mark? > > I'd also suggest at this point another change: please rename it to > drm_of_kms_component_probe() since this is only a generic case for KMS > drivers. GPU DRM drivers need something different. OK, will do. > > -- > FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up > according to speedtest.net. >
Hi Liviu, Am Montag, 9. November 2015, 12:07:20 schrieb Liviu Dudau: > On Mon, Nov 09, 2015 at 12:03:35PM +0000, Russell King - ARM Linux wrote: > > On Mon, Nov 09, 2015 at 11:57:27AM +0000, Liviu Dudau wrote: > > > Meanwhile, what is your suggestion regarding the patchset. I've seen David has > > > sent Linus a pull request for 4.4-rc1 that includes it. Should we send a > > > revert for rockchip commit and then patch later the function? > > > > It definitely needs to be fixed, and I'd suggest its early enough in the > > -rc cycle (which hasn't begun yet) to simply fix drm_of_component_probe() > > to take two compare functions. > > I still don't have a Rockchip board to test the patch, so I need to find out > someone willing to test them. Mark? I of course also have a plethora of rockchip boards, so can test stuff as well. Heiko
On Tue, Nov 10, 2015 at 04:53:09PM +0800, Mark yao wrote: > On 2015?11?09? 19:57, Liviu Dudau wrote: > > Meanwhile, what is your suggestion regarding the patchset. I've seen David has > sent Linus a pull request for 4.4-rc1 that includes it. Should we send a > revert for rockchip commit and then patch later the function? > > Hi Liviu > I had sent a patch to revert this rockchip commit, verfied rockchip drm works. So we can do the fix later. Yeah, and I'm thinking about ACK-ing it. On one hand I would like to have this fixed, on the other hand I don't want the rockchip platform to be broken. But looking at the rest of the changes I need to do it doesn't feel right to make you wait for them. Best regards, Liviu > > Thanks all the same. :-) > > -- ?ark Yao > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel
diff --git a/drivers/gpu/drm/drm_of.c b/drivers/gpu/drm/drm_of.c index be38840..493c05c 100644 --- a/drivers/gpu/drm/drm_of.c +++ b/drivers/gpu/drm/drm_of.c @@ -1,3 +1,4 @@ +#include <linux/component.h> #include <linux/export.h> #include <linux/list.h> #include <linux/of_graph.h> @@ -61,3 +62,90 @@ uint32_t drm_of_find_possible_crtcs(struct drm_device *dev, return possible_crtcs; } EXPORT_SYMBOL(drm_of_find_possible_crtcs); + +/** + * drm_of_component_probe - Generic probe function for a component based master + * @dev: master device containing the OF node + * @compare_of: compare function used for matching components + * @master_ops: component master ops to be used + * + * Parse the platform device OF node and bind all the components associated + * with the master. Interface ports are added before the encoders in order to + * satisfy their .bind requirements + * See Documentation/devicetree/bindings/graph.txt for the bindings. + * + * Returns zero if successful, or one of the standard error codes if it fails. + */ +int drm_of_component_probe(struct device *dev, + int (*compare_of)(struct device *, void *), + const struct component_master_ops *m_ops) +{ + struct device_node *ep, *port, *remote; + struct component_match *match = NULL; + int i; + + if (!dev->of_node) + return -EINVAL; + + /* + * Bind the crtc's ports first, so that drm_of_find_possible_crtcs() + * called from encoder's .bind callbacks works as expected + */ + for (i = 0; ; i++) { + port = of_parse_phandle(dev->of_node, "ports", i); + if (!port) + break; + + if (!of_device_is_available(port->parent)) { + of_node_put(port); + continue; + } + + component_match_add(dev, &match, compare_of, port); + of_node_put(port); + } + + if (i == 0) { + dev_err(dev, "missing 'ports' property\n"); + return -ENODEV; + } + + if (!match) { + dev_err(dev, "no available port\n"); + return -ENODEV; + } + + /* + * For bound crtcs, bind the encoders attached to their remote endpoint + */ + for (i = 0; ; i++) { + port = of_parse_phandle(dev->of_node, "ports", i); + if (!port) + break; + + if (!of_device_is_available(port->parent)) { + of_node_put(port); + continue; + } + + for_each_child_of_node(port, ep) { + remote = of_graph_get_remote_port_parent(ep); + if (!remote || !of_device_is_available(remote)) { + of_node_put(remote); + continue; + } else if (!of_device_is_available(remote->parent)) { + dev_warn(dev, "parent device of %s is not available\n", + remote->full_name); + of_node_put(remote); + continue; + } + + component_match_add(dev, &match, compare_of, remote); + of_node_put(remote); + } + of_node_put(port); + } + + return component_master_add_with_match(dev, m_ops, match); +} +EXPORT_SYMBOL(drm_of_component_probe); diff --git a/include/drm/drm_of.h b/include/drm/drm_of.h index 2441f71..8544665 100644 --- a/include/drm/drm_of.h +++ b/include/drm/drm_of.h @@ -1,18 +1,31 @@ #ifndef __DRM_OF_H__ #define __DRM_OF_H__ +struct component_master_ops; +struct device; struct drm_device; struct device_node; #ifdef CONFIG_OF extern uint32_t drm_of_find_possible_crtcs(struct drm_device *dev, struct device_node *port); +extern int drm_of_component_probe(struct device *dev, + int (*compare_of)(struct device *, void *), + const struct component_master_ops *m_ops); #else static inline uint32_t drm_of_find_possible_crtcs(struct drm_device *dev, struct device_node *port) { return 0; } + +static inline int +drm_of_component_probe(struct device *dev, + int (*compare_of)(struct device *, void *), + const struct component_master_ops *m_ops) +{ + return -EINVAL; +} #endif #endif /* __DRM_OF_H__ */
A lot of component based DRM drivers use a variant of the same code as the probe function. They bind the crtc ports in the first iteration and then scan through the child nodes and bind the encoders attached to the remote endpoints. Factor the common code into a separate function called drm_of_component_probe() in order to increase code reuse. Cc: David Airlie <airlied@linux.ie> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> --- drivers/gpu/drm/drm_of.c | 88 ++++++++++++++++++++++++++++++++++++++++++++++++ include/drm/drm_of.h | 13 +++++++ 2 files changed, 101 insertions(+)