| Message ID | 1447416064-24989-3-git-send-email-enric.balletbo@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Nov 13, 2015 at 01:01:03PM +0100, Enric Balletbo i Serra wrote: > The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter > designed for portable devices. > > You can add support to your board with current binding. > > Example: > > anx7814: anx7814@38 { > compatible = "analogix,anx7814"; > reg = <0x38>; > pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; > reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; > }; > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > .../devicetree/bindings/video/bridge/anx7814.txt | 36 ++++++++++++++++++++++ > 1 file changed, 36 insertions(+) > create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt > > diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt > new file mode 100644 > index 0000000..f7bdca9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt > @@ -0,0 +1,36 @@ > +Analogix ANX7814 SlimPort (Full-HD Transmitter) > +----------------------------------------------- > + > +The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter > +designed for portable devices. > + > +Required properties: > + > + - compatible : "analogix,anx7814" > + - reg : I2C address of the device > + - cable-det-gpios : Which GPIO to use for cable detection Shouldn't this be an interrupt instead (to a gpio controller still)? > + - pd-gpios : Which GPIO to use for power down > + - reset-gpios : Which GPIO to use for reset > + > +Optional properties: > + > + - v10-gpios : Which GPIO to use for V10 control. > + - video interfaces: Device node can contain video interface port nodes. Please specify how many ports and how many endpoints for each port. > + > +Example: > + > + anx7814: anx7814@38 { > + compatible = "analogix,anx7814"; > + reg = <0x38>; > + cable-det-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; > + pd-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; > + v10-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; > + ports { > + port@0 { Either simplify to just port (dropping ports) or add a reg property here. > + anx7814_in: endpoint { > + remote-endpoint = <&hdmi0_out>; > + }; > + }; > + }; > + }; > -- > 2.1.0 >
diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt new file mode 100644 index 0000000..f7bdca9 --- /dev/null +++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt @@ -0,0 +1,36 @@ +Analogix ANX7814 SlimPort (Full-HD Transmitter) +----------------------------------------------- + +The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter +designed for portable devices. + +Required properties: + + - compatible : "analogix,anx7814" + - reg : I2C address of the device + - cable-det-gpios : Which GPIO to use for cable detection + - pd-gpios : Which GPIO to use for power down + - reset-gpios : Which GPIO to use for reset + +Optional properties: + + - v10-gpios : Which GPIO to use for V10 control. + - video interfaces: Device node can contain video interface port nodes. + +Example: + + anx7814: anx7814@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + cable-det-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + pd-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + v10-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + ports { + port@0 { + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + }; + };
The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter designed for portable devices. You can add support to your board with current binding. Example: anx7814: anx7814@38 { compatible = "analogix,anx7814"; reg = <0x38>; pd-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; }; Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- .../devicetree/bindings/video/bridge/anx7814.txt | 36 ++++++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt