diff mbox

dax pmd fault handler never returns to userspace

Message ID 20151119003624.GA26287@linux.intel.com (mailing list archive)
State Accepted
Commit 01871e59af5c
Headers show

Commit Message

Ross Zwisler Nov. 19, 2015, 12:36 a.m. UTC
On Wed, Nov 18, 2015 at 03:04:41PM -0700, Toshi Kani wrote:
> On Wed, 2015-11-18 at 13:57 -0800, Dan Williams wrote:
> > On Wed, Nov 18, 2015 at 1:33 PM, Toshi Kani <toshi.kani@hpe.com> wrote:
> > > I am seeing a similar/same problem in my test.  I think the problem is that
> > > in
> > > case of a WP fault, wp_huge_pmd() -> __dax_pmd_fault() ->
> > > vmf_insert_pfn_pmd(),
> > > which is a no-op since the PMD is mapped already.  We need WP handling for
> > > this
> > > PMD map.
> > > 
> > > If it helps, I have attached change for follow_trans_huge_pmd().  I have not
> > > tested much, though.
> > 
> > Interesting, I didn't get this far because my tests were crashing the
> > kernel.  I'll add this case the pmd fault test in ndctl.
> 
> I hit this one with mmap(MAP_POPULATE).  With this change, I then hit the WP
> fault loop when writing to the range.

Here's a fix - please let me know if this seems incomplete or incorrect for
some reason.

-- >8 --
From 02aa9f37d7ec9c0c38413f7e304b2577eb9f974a Mon Sep 17 00:00:00 2001
From: Ross Zwisler <ross.zwisler@linux.intel.com>
Date: Wed, 18 Nov 2015 17:15:09 -0700
Subject: [PATCH] mm: Allow DAX PMD mappings to become writeable

Prior to this change DAX PMD mappings that were made read-only were never able
to be made writable again.  This is because the code in insert_pfn_pmd() that
calls pmd_mkdirty() and pmd_mkwrite() would skip these calls if the PMD
already existed in the page table.

Instead, if we are doing a write always mark the PMD entry as dirty and
writeable.  Without this code we can get into a condition where we mark the
PMD as read-only, and then on a subsequent write fault we get into an infinite
loop of PMD faults where we try unsuccessfully to make the PMD writeable.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
---
 mm/huge_memory.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

Comments

Dan Williams Nov. 19, 2015, 12:39 a.m. UTC | #1
On Wed, Nov 18, 2015 at 4:36 PM, Ross Zwisler
<ross.zwisler@linux.intel.com> wrote:
> On Wed, Nov 18, 2015 at 03:04:41PM -0700, Toshi Kani wrote:
>> On Wed, 2015-11-18 at 13:57 -0800, Dan Williams wrote:
>> > On Wed, Nov 18, 2015 at 1:33 PM, Toshi Kani <toshi.kani@hpe.com> wrote:
>> > > I am seeing a similar/same problem in my test.  I think the problem is that
>> > > in
>> > > case of a WP fault, wp_huge_pmd() -> __dax_pmd_fault() ->
>> > > vmf_insert_pfn_pmd(),
>> > > which is a no-op since the PMD is mapped already.  We need WP handling for
>> > > this
>> > > PMD map.
>> > >
>> > > If it helps, I have attached change for follow_trans_huge_pmd().  I have not
>> > > tested much, though.
>> >
>> > Interesting, I didn't get this far because my tests were crashing the
>> > kernel.  I'll add this case the pmd fault test in ndctl.
>>
>> I hit this one with mmap(MAP_POPULATE).  With this change, I then hit the WP
>> fault loop when writing to the range.
>
> Here's a fix - please let me know if this seems incomplete or incorrect for
> some reason.
>
> -- >8 --
> From 02aa9f37d7ec9c0c38413f7e304b2577eb9f974a Mon Sep 17 00:00:00 2001
> From: Ross Zwisler <ross.zwisler@linux.intel.com>
> Date: Wed, 18 Nov 2015 17:15:09 -0700
> Subject: [PATCH] mm: Allow DAX PMD mappings to become writeable
>
> Prior to this change DAX PMD mappings that were made read-only were never able
> to be made writable again.  This is because the code in insert_pfn_pmd() that
> calls pmd_mkdirty() and pmd_mkwrite() would skip these calls if the PMD
> already existed in the page table.
>
> Instead, if we are doing a write always mark the PMD entry as dirty and
> writeable.  Without this code we can get into a condition where we mark the
> PMD as read-only, and then on a subsequent write fault we get into an infinite
> loop of PMD faults where we try unsuccessfully to make the PMD writeable.
>
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> ---
>  mm/huge_memory.c | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index bbac913..1b3df56 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -877,15 +877,13 @@ static void insert_pfn_pmd(struct vm_area_struct *vma, unsigned long addr,
>         spinlock_t *ptl;
>
>         ptl = pmd_lock(mm, pmd);
> -       if (pmd_none(*pmd)) {
> -               entry = pmd_mkhuge(pfn_pmd(pfn, prot));
> -               if (write) {
> -                       entry = pmd_mkyoung(pmd_mkdirty(entry));
> -                       entry = maybe_pmd_mkwrite(entry, vma);
> -               }
> -               set_pmd_at(mm, addr, pmd, entry);
> -               update_mmu_cache_pmd(vma, addr, pmd);
> +       entry = pmd_mkhuge(pfn_pmd(pfn, prot));
> +       if (write) {
> +               entry = pmd_mkyoung(pmd_mkdirty(entry));
> +               entry = maybe_pmd_mkwrite(entry, vma);
>         }
> +       set_pmd_at(mm, addr, pmd, entry);
> +       update_mmu_cache_pmd(vma, addr, pmd);
>         spin_unlock(ptl);
>  }

Looks good to me.
Kani, Toshi Nov. 19, 2015, 1:05 a.m. UTC | #2
On Wed, 2015-11-18 at 17:36 -0700, Ross Zwisler wrote:
> On Wed, Nov 18, 2015 at 03:04:41PM -0700, Toshi Kani wrote:
> > On Wed, 2015-11-18 at 13:57 -0800, Dan Williams wrote:
> > > On Wed, Nov 18, 2015 at 1:33 PM, Toshi Kani <toshi.kani@hpe.com> wrote:
> > > > I am seeing a similar/same problem in my test.  I think the problem is 
> > > > that in case of a WP fault, wp_huge_pmd() -> __dax_pmd_fault() ->
> > > > vmf_insert_pfn_pmd(), which is a no-op since the PMD is mapped already. 
> > > >  We need WP handling for this PMD map.
> > > > 
> > > > If it helps, I have attached change for follow_trans_huge_pmd().  I have 
> > > > not tested much, though.
> > > 
> > > Interesting, I didn't get this far because my tests were crashing the
> > > kernel.  I'll add this case the pmd fault test in ndctl.
> > 
> > I hit this one with mmap(MAP_POPULATE).  With this change, I then hit the WP
> > fault loop when writing to the range.
> 
> Here's a fix - please let me know if this seems incomplete or incorrect for
> some reason.

My test looks working now. :-)  I will do more testing and submit the gup patch 
as well.

Thanks,  
-Toshi
Dan Williams Nov. 19, 2015, 1:19 a.m. UTC | #3
On Wed, Nov 18, 2015 at 4:36 PM, Ross Zwisler
<ross.zwisler@linux.intel.com> wrote:
> On Wed, Nov 18, 2015 at 03:04:41PM -0700, Toshi Kani wrote:
>> On Wed, 2015-11-18 at 13:57 -0800, Dan Williams wrote:
>> > On Wed, Nov 18, 2015 at 1:33 PM, Toshi Kani <toshi.kani@hpe.com> wrote:
>> > > I am seeing a similar/same problem in my test.  I think the problem is that
>> > > in
>> > > case of a WP fault, wp_huge_pmd() -> __dax_pmd_fault() ->
>> > > vmf_insert_pfn_pmd(),
>> > > which is a no-op since the PMD is mapped already.  We need WP handling for
>> > > this
>> > > PMD map.
>> > >
>> > > If it helps, I have attached change for follow_trans_huge_pmd().  I have not
>> > > tested much, though.
>> >
>> > Interesting, I didn't get this far because my tests were crashing the
>> > kernel.  I'll add this case the pmd fault test in ndctl.
>>
>> I hit this one with mmap(MAP_POPULATE).  With this change, I then hit the WP
>> fault loop when writing to the range.
>
> Here's a fix - please let me know if this seems incomplete or incorrect for
> some reason.
>
> -- >8 --
> From 02aa9f37d7ec9c0c38413f7e304b2577eb9f974a Mon Sep 17 00:00:00 2001
> From: Ross Zwisler <ross.zwisler@linux.intel.com>
> Date: Wed, 18 Nov 2015 17:15:09 -0700
> Subject: [PATCH] mm: Allow DAX PMD mappings to become writeable
>
> Prior to this change DAX PMD mappings that were made read-only were never able
> to be made writable again.  This is because the code in insert_pfn_pmd() that
> calls pmd_mkdirty() and pmd_mkwrite() would skip these calls if the PMD
> already existed in the page table.
>
> Instead, if we are doing a write always mark the PMD entry as dirty and
> writeable.  Without this code we can get into a condition where we mark the
> PMD as read-only, and then on a subsequent write fault we get into an infinite
> loop of PMD faults where we try unsuccessfully to make the PMD writeable.
>
> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
> ---
>  mm/huge_memory.c | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)
>
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index bbac913..1b3df56 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -877,15 +877,13 @@ static void insert_pfn_pmd(struct vm_area_struct *vma, unsigned long addr,
>         spinlock_t *ptl;
>
>         ptl = pmd_lock(mm, pmd);
> -       if (pmd_none(*pmd)) {
> -               entry = pmd_mkhuge(pfn_pmd(pfn, prot));
> -               if (write) {
> -                       entry = pmd_mkyoung(pmd_mkdirty(entry));
> -                       entry = maybe_pmd_mkwrite(entry, vma);
> -               }
> -               set_pmd_at(mm, addr, pmd, entry);
> -               update_mmu_cache_pmd(vma, addr, pmd);
> +       entry = pmd_mkhuge(pfn_pmd(pfn, prot));
> +       if (write) {
> +               entry = pmd_mkyoung(pmd_mkdirty(entry));
> +               entry = maybe_pmd_mkwrite(entry, vma);
>         }
> +       set_pmd_at(mm, addr, pmd, entry);
> +       update_mmu_cache_pmd(vma, addr, pmd);
>         spin_unlock(ptl);

Hmm other paths that do pmd_mkwrite are using pmdp_set_access_flags()
and it's not immediately clear to me why.
diff mbox

Patch

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index bbac913..1b3df56 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -877,15 +877,13 @@  static void insert_pfn_pmd(struct vm_area_struct *vma, unsigned long addr,
 	spinlock_t *ptl;
 
 	ptl = pmd_lock(mm, pmd);
-	if (pmd_none(*pmd)) {
-		entry = pmd_mkhuge(pfn_pmd(pfn, prot));
-		if (write) {
-			entry = pmd_mkyoung(pmd_mkdirty(entry));
-			entry = maybe_pmd_mkwrite(entry, vma);
-		}
-		set_pmd_at(mm, addr, pmd, entry);
-		update_mmu_cache_pmd(vma, addr, pmd);
+	entry = pmd_mkhuge(pfn_pmd(pfn, prot));
+	if (write) {
+		entry = pmd_mkyoung(pmd_mkdirty(entry));
+		entry = maybe_pmd_mkwrite(entry, vma);
 	}
+	set_pmd_at(mm, addr, pmd, entry);
+	update_mmu_cache_pmd(vma, addr, pmd);
 	spin_unlock(ptl);
 }