| Message ID | 1447905280-5172-1-git-send-email-cory.tusar@pid1solutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 2015-11-18 19:54, Cory Tusar wrote: > Per the Vybrid Reference Manual (section 3.8.6.1), dspi0 has 6 chip > select signals associated with it, while dspi1 has only 4. That is right, verified by in my RM! Acked-by: Stefan Agner <stefan@agner.ch> > > Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> > --- > arch/arm/boot/dts/vfxxx.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi > index 6736bae..1cca43a 100644 > --- a/arch/arm/boot/dts/vfxxx.dtsi > +++ b/arch/arm/boot/dts/vfxxx.dtsi > @@ -158,7 +158,7 @@ > interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks VF610_CLK_DSPI0>; > clock-names = "dspi"; > - spi-num-chipselects = <5>; > + spi-num-chipselects = <6>; > status = "disabled"; > }; > > @@ -170,7 +170,7 @@ > interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; > clocks = <&clks VF610_CLK_DSPI1>; > clock-names = "dspi"; > - spi-num-chipselects = <5>; > + spi-num-chipselects = <4>; > status = "disabled"; > };
On Wed, Nov 18, 2015 at 10:54:39PM -0500, Cory Tusar wrote: > Per the Vybrid Reference Manual (section 3.8.6.1), dspi0 has 6 chip > select signals associated with it, while dspi1 has only 4. > > Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> Applied, thanks.
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 6736bae..1cca43a 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -158,7 +158,7 @@ interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; - spi-num-chipselects = <5>; + spi-num-chipselects = <6>; status = "disabled"; }; @@ -170,7 +170,7 @@ interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; - spi-num-chipselects = <5>; + spi-num-chipselects = <4>; status = "disabled"; };
Per the Vybrid Reference Manual (section 3.8.6.1), dspi0 has 6 chip select signals associated with it, while dspi1 has only 4. Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> --- arch/arm/boot/dts/vfxxx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)