diff mbox

[01/02] ARM: shmobile: r8a7793: Add DU node to device tree

Message ID 20151116091523.20711.53542.sendpatchset@little-apple (mailing list archive)
State Accepted
Commit ee94fc9b026dd14dd31d9975a62caebf70472a59
Delegated to: Simon Horman
Headers show

Commit Message

Magnus Damm Nov. 16, 2015, 9:15 a.m. UTC 
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
---

 Previously part of the following series:
 [PATCH 0/5] R-Car DU: Add support for R8A7793 and R8A7794

 arch/arm/boot/dts/r8a7793.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Simon Horman Nov. 25, 2015, 12:14 a.m. UTC | #1 
On Mon, Nov 16, 2015 at 06:15:23PM +0900, Magnus Damm wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> 
> Add the DU device with a disabled state. Boards that want to enable the
> DU need to specify the output topology.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> Signed-off-by: Magnus Damm <damm+renesas@opensource.se>

Thanks, I have queued this up for v4.5.
--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index c50c5f65388a..2072f55a524a 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -140,6 +140,36 @@ 
 		status = "disabled";
 	};
 
+	du: display@feb00000 {
+		compatible = "renesas,du-r8a7793";
+		reg = <0 0xfeb00000 0 0x40000>,
+		      <0 0xfeb90000 0 0x1c>;
+		reg-names = "du", "lvds.0";
+		interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 268 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7793_CLK_DU0>,
+			 <&mstp7_clks R8A7793_CLK_DU1>,
+			 <&mstp7_clks R8A7793_CLK_LVDS0>;
+		clock-names = "du.0", "du.1", "lvds.0";
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				du_out_rgb: endpoint {
+				};
+			};
+			port@1 {
+				reg = <1>;
+				du_out_lvds0: endpoint {
+				};
+			};
+		};
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;