===================================================================
@@ -0,0 +1,417 @@
+/*
+ * drivers/base/power/clock_ops.c - Generic clock manipulation PM callbacks
+ *
+ * Copyright (c) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+struct pm_runtime_clk_data {
+ struct list_head clock_list;
+ struct mutex lock;
+};
+
+struct pm_clock_entry {
+ struct list_head node;
+ char *con_id;
+ struct clk *clk;
+ unsigned int clock_enabled:1;
+};
+
+static struct pm_runtime_clk_data *__to_prd(struct device *dev)
+{
+ return dev ? dev->power.subsys_data : NULL;
+}
+
+/**
+ * pm_runtime_clk_add - Start using a device clock for runtime PM.
+ * @dev: Device whose clock is going to be used for runtime PM.
+ * @con_id: Connection ID of the clock.
+ *
+ * Add the clock represented by @con_id to the list of clocks used for
+ * the runtime PM of @dev.
+ */
+int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce;
+
+ if (!prd)
+ return -EINVAL;
+
+ ce = kzalloc(sizeof(*ce), GFP_KERNEL);
+ if (!ce) {
+ dev_err(dev, "Not enough memory for clock entry.\n");
+ return -ENOMEM;
+ }
+
+ if (con_id) {
+ ce->con_id = kstrdup(con_id, GFP_KERNEL);
+ if (!ce->con_id) {
+ dev_err(dev,
+ "Not enough memory for clock conection ID.\n");
+ kfree(ce);
+ return -ENOMEM;
+ }
+ }
+
+ mutex_lock(&prd->lock);
+ list_add_tail(&ce->node, &prd->clock_list);
+ mutex_unlock(&prd->lock);
+ return 0;
+}
+
+/**
+ * __pm_runtime_clk_remove - Destroy runtime PM clock entry.
+ * @ce: Runtime PM clock entry to destroy.
+ *
+ * This routine must be called under the mutex protecting the runtime PM list
+ * of clocks corresponding the the @ce's device.
+ */
+static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
+{
+ if (!ce)
+ return;
+
+ list_del(&ce->node);
+
+ if (!IS_ERR_OR_NULL(ce->clk)) {
+ if (ce->clock_enabled)
+ clk_disable(ce->clk);
+
+ clk_put(ce->clk);
+ }
+
+ if (ce->con_id)
+ kfree(ce->con_id);
+
+ kfree(ce);
+}
+
+/**
+ * pm_runtime_clk_remove - Stop using a device clock for runtime PM.
+ * @dev: Device whose clock should not be used for runtime PM any more.
+ * @con_id: Connection ID of the clock.
+ *
+ * Remove the clock represented by @con_id from the list of clocks used for
+ * the runtime PM of @dev.
+ */
+void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce;
+
+ if (!prd)
+ return;
+
+ mutex_lock(&prd->lock);
+
+ list_for_each_entry(ce, &prd->clock_list, node)
+ if (!con_id && !ce->con_id) {
+ __pm_runtime_clk_remove(ce);
+ break;
+ } else if (!con_id || !ce->con_id) {
+ continue;
+ } else if (!strcmp(con_id, ce->con_id)) {
+ __pm_runtime_clk_remove(ce);
+ break;
+ }
+
+ mutex_unlock(&prd->lock);
+}
+
+/**
+ * pm_runtime_clk_init - Initialize a device's list of runtime PM clocks.
+ * @dev: Device to initialize the list of runtime PM clocks for.
+ *
+ * Allocate a struct pm_runtime_clk_data object, initialize its lock member and
+ * make the @dev's power.subsys_data field point to it.
+ */
+int pm_runtime_clk_init(struct device *dev)
+{
+ struct pm_runtime_clk_data *prd;
+
+ prd = kzalloc(sizeof(*prd), GFP_KERNEL);
+ if (!prd) {
+ dev_err(dev, "Not enough memory fo runtime PM data.\n");
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&prd->clock_list);
+ mutex_init(&prd->lock);
+ dev->power.subsys_data = prd;
+ return 0;
+}
+
+/**
+ * pm_runtime_clk_destroy - Destroy a device's list of runtime PM clocks.
+ * @dev: Device to destroy the list of runtime PM clocks for.
+ *
+ * Clear the @dev's power.subsys_data field, remove the list of clock entries
+ * from the struct pm_runtime_clk_data object pointed to by it before and free
+ * that object.
+ */
+void pm_runtime_clk_destroy(struct device *dev)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce, *c;
+
+ if (!prd)
+ return;
+
+ dev->power.subsys_data = NULL;
+
+ mutex_lock(&prd->lock);
+
+ list_for_each_entry_safe_reverse(ce, c, &prd->clock_list, node)
+ __pm_runtime_clk_remove(ce);
+
+ mutex_unlock(&prd->lock);
+
+ kfree(prd);
+}
+
+/**
+ * pm_runtime_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @con_id: Connection ID of the clock.
+ */
+static void pm_runtime_clk_acquire(struct device *dev,
+ struct pm_clock_entry *ce)
+{
+ ce->clk = clk_get(dev, ce->con_id);
+ if (!IS_ERR(ce->clk))
+ dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+}
+
+/**
+ * pm_runtime_clk_suspend - Disable clocks in a device's runtime PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_runtime_clk_suspend(struct device *dev)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (!prd)
+ return 0;
+
+ mutex_lock(&prd->lock);
+
+ list_for_each_entry_reverse(ce, &prd->clock_list, node) {
+ if (!ce->clk)
+ pm_runtime_clk_acquire(dev, ce);
+
+ if (!IS_ERR(ce->clk)) {
+ clk_disable(ce->clk);
+ ce->clock_enabled = false;
+ }
+ }
+
+ mutex_unlock(&prd->lock);
+
+ return 0;
+}
+
+/**
+ * pm_runtime_clk_resume - Enable clocks in a device's runtime PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_runtime_clk_resume(struct device *dev)
+{
+ struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clock_entry *ce;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (!prd)
+ return 0;
+
+ mutex_lock(&prd->lock);
+
+ list_for_each_entry(ce, &prd->clock_list, node) {
+ if (!ce->clk)
+ pm_runtime_clk_acquire(dev, ce);
+
+ if (!IS_ERR(ce->clk)) {
+ clk_enable(ce->clk);
+ ce->clock_enabled = true;
+ }
+ }
+
+ mutex_unlock(&prd->lock);
+
+ return 0;
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the pwr_domain member of that object is copied to the device's
+ * pwr_domain field and its con_ids member is used to populate the device's list
+ * of runtime PM clocks, depending on @action.
+ *
+ * If the device's pwr_domain field is already populated with a value different
+ * from the one stored in the struct pm_clk_notifier_block object, the function
+ * does nothing.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pm_clk_notifier_block *clknb;
+ struct device *dev = data;
+ char *con_id;
+ int error;
+
+ dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+ clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (dev->pwr_domain)
+ break;
+
+ error = pm_runtime_clk_init(dev);
+ if (error)
+ break;
+
+ dev->pwr_domain = clknb->pwr_domain;
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+ pm_runtime_clk_add(dev, con_id);
+ } else {
+ pm_runtime_clk_add(dev, NULL);
+ }
+
+ break;
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (dev->pwr_domain != clknb->pwr_domain)
+ break;
+
+ dev->pwr_domain = NULL;
+ pm_runtime_clk_destroy(dev);
+ break;
+ }
+
+ return 0;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+/**
+ * enable_clock - Enable a device clock.
+ * @dev: Device whose clock is to be enabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void enable_clock(struct device *dev, const char *con_id)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, con_id);
+ if (!IS_ERR(clk)) {
+ clk_enable(clk);
+ clk_put(clk);
+ dev_info(dev, "Runtime PM disabled, clock forced on.\n");
+ }
+}
+
+/**
+ * disable_clock - Disable a device clock.
+ * @dev: Device whose clock is to be disabled.
+ * @con_id: Connection ID of the clock.
+ */
+static void disable_clock(struct device *dev, const char *con_id)
+{
+ struct clk *clk;
+
+ clk = clk_get(dev, con_id);
+ if (!IS_ERR(clk)) {
+ clk_disable(clk);
+ clk_put(clk);
+ dev_info(dev, "Runtime PM disabled, clock forced off.\n");
+ }
+}
+
+/**
+ * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * @nb: Notifier block object this function is a member of.
+ * @action: Operation being carried out by the caller.
+ * @data: Device the routine is being run for.
+ *
+ * For this function to work, @nb must be a member of an object of type
+ * struct pm_clk_notifier_block containing all of the requisite data.
+ * Specifically, the con_ids member of that object is used to enable or disable
+ * the device's clocks, depending on @action.
+ */
+static int pm_runtime_clk_notify(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct pm_clk_notifier_block *clknb;
+ struct device *dev = data;
+
+ dev_dbg(dev, "%s() %ld\n", __func__, action);
+
+ clknb = container_of(nb, struct pm_clk_notifier_block, nb);
+
+ switch (action) {
+ case BUS_NOTIFY_ADD_DEVICE:
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+ enable_clock(dev, con_id);
+ } else {
+ enable_clock(dev, NULL);
+ }
+ break;
+ case BUS_NOTIFY_DEL_DEVICE:
+ if (clknb->con_ids[0]) {
+ for (con_id = clknb->con_ids[0]; *con_id; con_id++)
+ disable_clock(dev, con_id);
+ } else {
+ disable_clock(dev, NULL);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+/**
+ * pm_runtime_clk_add_notifier - Add bus type notifier for runtime PM clocks.
+ * @bus: Bus type to add the notifier to.
+ * @clknb: Notifier to be added to the given bus type.
+ *
+ * The nb member of @clknb is not expected to be initialized and its
+ * notifier_call member will be replaced with pm_runtime_clk_notify(). However,
+ * the remaining members of @clknb should be populated prior to calling this
+ * routine.
+ */
+void pm_runtime_clk_add_notifier(struct bus_type *bus,
+ struct pm_clk_notifier_block *clknb)
+{
+ if (!bus || !clknb)
+ return;
+
+ clknb->nb.notifier_call = pm_runtime_clk_notify;
+ bus_register_notifier(bus, &clknb->nb);
+}
===================================================================
@@ -229,3 +229,7 @@ config PM_OPP
representing individual voltage domains and provides SOC
implementations a ready to use framework to manage OPPs.
For more information, read <file:Documentation/power/opp.txt>
+
+config PM_RUNTIME_CLK
+ def_bool y
+ depends on PM_RUNTIME && HAVE_CLK
===================================================================
@@ -3,6 +3,7 @@ obj-$(CONFIG_PM_SLEEP) += main.o wakeup.
obj-$(CONFIG_PM_RUNTIME) += runtime.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
obj-$(CONFIG_PM_OPP) += opp.o
+obj-$(CONFIG_HAVE_CLK) += clock_ops.o
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
ccflags-$(CONFIG_PM_VERBOSE) += -DDEBUG
===================================================================
@@ -245,4 +245,46 @@ static inline void pm_runtime_dont_use_a
__pm_runtime_use_autosuspend(dev, false);
}
+struct pm_clk_notifier_block {
+ struct notifier_block nb;
+ struct dev_power_domain *pwr_domain;
+ char *con_ids[];
+};
+
+#ifdef CONFIG_PM_RUNTIME_CLK
+extern int pm_runtime_clk_init(struct device *dev);
+extern void pm_runtime_clk_destroy(struct device *dev);
+extern int pm_runtime_clk_add(struct device *dev, const char *con_id);
+extern void pm_runtime_clk_remove(struct device *dev, const char *con_id);
+extern int pm_runtime_clk_suspend(struct device *dev);
+extern int pm_runtime_clk_resume(struct device *dev);
+#else
+static inline int pm_runtime_clk_init(struct device *dev)
+{
+ return -EINVAL;
+}
+static inline void pm_runtime_clk_destroy(struct device *dev)
+{
+}
+static inline int pm_runtime_clk_add(struct device *dev, const char *con_id)
+{
+ return -EINVAL;
+}
+static inline void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+{
+}
+#define pm_runtime_clock_suspend NULL
+#define pm_runtime_clock_resume NULL
+#endif
+
+#ifdef CONFIG_HAVE_CLK
+extern void pm_runtime_clk_add_notifier(struct bus_type *bus,
+ struct pm_clk_notifier_block *clknb);
+#else
+static inline void pm_runtime_clk_add_notifier(struct bus_type *bus,
+ struct pm_clk_notifier_block *clknb)
+{
+}
+#endif
+
#endif
===================================================================
@@ -21,70 +21,6 @@
#include <linux/slab.h>
#ifdef CONFIG_PM_RUNTIME
-#define BIT_ONCE 0
-#define BIT_ACTIVE 1
-#define BIT_CLK_ENABLED 2
-
-struct pm_runtime_data {
- unsigned long flags;
- struct clk *clk;
-};
-
-static struct pm_runtime_data *__to_prd(struct device *dev)
-{
- return dev ? dev->power.subsys_data : NULL;
-}
-
-static void platform_pm_runtime_init(struct device *dev,
- struct pm_runtime_data *prd)
-{
- if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
- prd->clk = clk_get(dev, NULL);
- if (!IS_ERR(prd->clk)) {
- set_bit(BIT_ACTIVE, &prd->flags);
- dev_info(dev, "clocks managed by runtime pm\n");
- }
- }
-}
-
-static void platform_pm_runtime_bug(struct device *dev,
- struct pm_runtime_data *prd)
-{
- if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
- dev_err(dev, "runtime pm suspend before resume\n");
-}
-
-static int default_platform_runtime_suspend(struct device *dev)
-{
- struct pm_runtime_data *prd = __to_prd(dev);
-
- dev_dbg(dev, "%s()\n", __func__);
-
- platform_pm_runtime_bug(dev, prd);
-
- if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
- clk_disable(prd->clk);
- clear_bit(BIT_CLK_ENABLED, &prd->flags);
- }
-
- return 0;
-}
-
-static int default_platform_runtime_resume(struct device *dev)
-{
- struct pm_runtime_data *prd = __to_prd(dev);
-
- dev_dbg(dev, "%s()\n", __func__);
-
- platform_pm_runtime_init(dev, prd);
-
- if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
- clk_enable(prd->clk);
- set_bit(BIT_CLK_ENABLED, &prd->flags);
- }
-
- return 0;
-}
static int default_platform_runtime_idle(struct device *dev)
{
@@ -94,87 +30,29 @@ static int default_platform_runtime_idle
static struct dev_power_domain default_power_domain = {
.ops = {
- .runtime_suspend = default_platform_runtime_suspend,
- .runtime_resume = default_platform_runtime_resume,
+ .runtime_suspend = pm_runtime_clk_suspend,
+ .runtime_resume = pm_runtime_clk_resume,
.runtime_idle = default_platform_runtime_idle,
USE_PLATFORM_PM_SLEEP_OPS
},
};
-static int platform_bus_notify(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- struct pm_runtime_data *prd;
+#define DEFAULT_PWR_DOMAIN_PTR (&default_power_domain)
- dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+#else
- switch (action) {
- case BUS_NOTIFY_BIND_DRIVER:
- prd = kzalloc(sizeof(*prd), GFP_KERNEL);
- if (prd) {
- dev->power.subsys_data = prd;
- dev->pwr_domain = &default_power_domain;
- } else {
- dev_err(dev, "unable to alloc memory for runtime pm\n");
- }
- break;
- case BUS_NOTIFY_UNBOUND_DRIVER:
- prd = __to_prd(dev);
- if (prd) {
- if (test_bit(BIT_CLK_ENABLED, &prd->flags))
- clk_disable(prd->clk);
-
- if (test_bit(BIT_ACTIVE, &prd->flags))
- clk_put(prd->clk);
- }
- break;
- }
-
- return 0;
-}
-
-#else /* CONFIG_PM_RUNTIME */
-
-static int platform_bus_notify(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- struct clk *clk;
-
- dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
-
- switch (action) {
- case BUS_NOTIFY_BIND_DRIVER:
- clk = clk_get(dev, NULL);
- if (!IS_ERR(clk)) {
- clk_enable(clk);
- clk_put(clk);
- dev_info(dev, "runtime pm disabled, clock forced on\n");
- }
- break;
- case BUS_NOTIFY_UNBOUND_DRIVER:
- clk = clk_get(dev, NULL);
- if (!IS_ERR(clk)) {
- clk_disable(clk);
- clk_put(clk);
- dev_info(dev, "runtime pm disabled, clock forced off\n");
- }
- break;
- }
-
- return 0;
-}
+#define DEFAULT_PWR_DOMAIN_PTR NULL
#endif /* CONFIG_PM_RUNTIME */
-static struct notifier_block platform_bus_notifier = {
- .notifier_call = platform_bus_notify
+static struct pm_clk_notifier_block platform_bus_notifier = {
+ .pwr_domain = DEFAULT_PWR_DOMAIN_PTR,
+ .con_ids = { NULL, },
};
static int __init sh_pm_runtime_init(void)
{
- bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+ pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
core_initcall(sh_pm_runtime_init);