| Message ID | 20151204205906.GG20125@localhost (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
[+cc Jingoo] On Fri, Dec 04, 2015 at 02:59:06PM -0600, Bjorn Helgaas wrote: > On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr Štetiar wrote: > > It's currently not possible to use reset-gpio on board where the GPIO is > > active low as the code incorrectly assumes, that reset-gpio will be > > always active high. > > > > In my case the broken behavior was observed on Toradex Apalis SoM with > > Ixora base board. > > > > Signed-off-by: Petr Štetiar <ynezz@true.cz> > > Applied as follows with Lucas' reviewed-by to pci/host-imx6 for v4.5, > thanks! Jingoo, I noticed pci-exynos.c also uses of_get_named_gpio(). Do you care about this issue, too, or are you content to ignore the GPIO flags for your "reset-gpio"? Bjorn > commit 5c5fb40de8f14391a1238db05cef88754faf9229 > Author: Petr Štetiar <ynezz@true.cz> > Date: Fri Nov 27 11:56:34 2015 +0100 > > PCI: imx6: Add support for active-low reset GPIO > > We previously used of_get_named_gpio(), which ignores the OF flags cell, so > the reset GPIO defaulted to "active high." This doesn't work on the Toradex > Apalis SoM with Ixora base board, which has an active-low reset GPIO. > > Use devm_gpiod_get_optional() instead so we pay attention to the active > high/low flag. This also adds support for GPIOs described via ACPI. > > [bhelgaas: changelog] > Signed-off-by: Petr Štetiar <ynezz@true.cz> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > > diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c > index 3c3b37f..8e9afa5 100644 > --- a/drivers/pci/host/pci-imx6.c > +++ b/drivers/pci/host/pci-imx6.c > @@ -32,7 +32,7 @@ > #define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp) > > struct imx6_pcie { > - int reset_gpio; > + struct gpio_desc *reset_gpio; > struct clk *pcie_bus; > struct clk *pcie_phy; > struct clk *pcie; > @@ -287,10 +287,10 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) > usleep_range(200, 500); > > /* Some boards don't have PCIe reset GPIO. */ > - if (gpio_is_valid(imx6_pcie->reset_gpio)) { > - gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0); > + if (imx6_pcie->reset_gpio) { > + gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 0); > msleep(100); > - gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1); > + gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1); > } > return 0; > > @@ -560,7 +560,6 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > { > struct imx6_pcie *imx6_pcie; > struct pcie_port *pp; > - struct device_node *np = pdev->dev.of_node; > struct resource *dbi_base; > int ret; > > @@ -581,15 +580,8 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) > return PTR_ERR(pp->dbi_base); > > /* Fetch GPIOs */ > - imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0); > - if (gpio_is_valid(imx6_pcie->reset_gpio)) { > - ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio, > - GPIOF_OUT_INIT_LOW, "PCIe reset"); > - if (ret) { > - dev_err(&pdev->dev, "unable to get reset gpio\n"); > - return ret; > - } > - } > + imx6_pcie->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", > + GPIOD_OUT_LOW); > > /* Fetch clocks */ > imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy"); -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[Jingoo's response didn't make it to the list because it contained HTML, but I incorporated it below manually] On Tue, Dec 8, 2015 at 11:28 PM, Han Jingoo wrote: > On Fri, Dec 04, 2015 at 03:02:34PM -0600, Bjorn Helgaas wrote: > > [+cc Jingoo] > > > > On Fri, Dec 04, 2015 at 02:59:06PM -0600, Bjorn Helgaas wrote: > > > On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr Štetiar wrote: > > > > It's currently not possible to use reset-gpio on board where the GPIO is > > > > active low as the code incorrectly assumes, that reset-gpio will be > > > > always active high. > > > > > > > > In my case the broken behavior was observed on Toradex Apalis SoM with > > > > Ixora base board. > > > > > > > > Signed-off-by: Petr Štetiar <ynezz@true.cz> > > > > > > Applied as follows with Lucas' reviewed-by to pci/host-imx6 for v4.5, > > > thanks! > > > > Jingoo, I noticed pci-exynos.c also uses of_get_named_gpio(). Do you > > care about this issue, too, or are you content to ignore the GPIO > > flags for your "reset-gpio"? > > Sorry, I don't care about it. > Also, there is no issue with Exynos platform. OK, thanks for checking! Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 3c3b37f..8e9afa5 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -32,7 +32,7 @@ #define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp) struct imx6_pcie { - int reset_gpio; + struct gpio_desc *reset_gpio; struct clk *pcie_bus; struct clk *pcie_phy; struct clk *pcie; @@ -287,10 +287,10 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) usleep_range(200, 500); /* Some boards don't have PCIe reset GPIO. */ - if (gpio_is_valid(imx6_pcie->reset_gpio)) { - gpio_set_value_cansleep(imx6_pcie->reset_gpio, 0); + if (imx6_pcie->reset_gpio) { + gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 0); msleep(100); - gpio_set_value_cansleep(imx6_pcie->reset_gpio, 1); + gpiod_set_value_cansleep(imx6_pcie->reset_gpio, 1); } return 0; @@ -560,7 +560,6 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) { struct imx6_pcie *imx6_pcie; struct pcie_port *pp; - struct device_node *np = pdev->dev.of_node; struct resource *dbi_base; int ret; @@ -581,15 +580,8 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(pp->dbi_base); /* Fetch GPIOs */ - imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0); - if (gpio_is_valid(imx6_pcie->reset_gpio)) { - ret = devm_gpio_request_one(&pdev->dev, imx6_pcie->reset_gpio, - GPIOF_OUT_INIT_LOW, "PCIe reset"); - if (ret) { - dev_err(&pdev->dev, "unable to get reset gpio\n"); - return ret; - } - } + imx6_pcie->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", + GPIOD_OUT_LOW); /* Fetch clocks */ imx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, "pcie_phy");