| Message ID | e0311a5e79a315814e8678c9ef4a32563c01d1e0.1449913392.git.maitysanchayan@gmail.com (mailing list archive) |
|---|---|
| State | Rejected |
| Headers | show |
> Frankly speaking I do not know where the fix should actually be. I2C IMX > driver somehow taking care of this or the users of I2C, touchscreen drivers > in this case. In my opinion, the fix should be with the touchscreen driver > however I did like to have feedback or hear opinions on what is the accepted > solution to this. There is no accepted solution to this yet :( DMA is/was still too rare for a serious discussion about this. There is also [1] and probably more... [1] http://patchwork.ozlabs.org/patch/220137/
On Sat, Dec 12, 2015 at 06:13:55PM +0100, Wolfram Sang wrote: > > > Frankly speaking I do not know where the fix should actually be. I2C IMX > > driver somehow taking care of this or the users of I2C, touchscreen drivers > > in this case. In my opinion, the fix should be with the touchscreen driver > > however I did like to have feedback or hear opinions on what is the accepted > > solution to this. > > There is no accepted solution to this yet :( DMA is/was still too rare for > a serious discussion about this. There is also [1] and probably more... > > [1] http://patchwork.ozlabs.org/patch/220137/ I believe vast majority of i2c client drivers do not expect that the transfer buffer they supply in i2c messages are supposed to be DMAable (unlike USB and SPI buses that had that requirement from the beginning). I won't be applying this patch unless we decide that I2C changes the rules. Thanks.
Hello, On 15-12-12 20:42:37, Dmitry Torokhov wrote: > On Sat, Dec 12, 2015 at 06:13:55PM +0100, Wolfram Sang wrote: > > > > > Frankly speaking I do not know where the fix should actually be. I2C IMX > > > driver somehow taking care of this or the users of I2C, touchscreen drivers > > > in this case. In my opinion, the fix should be with the touchscreen driver > > > however I did like to have feedback or hear opinions on what is the accepted > > > solution to this. > > > > There is no accepted solution to this yet :( DMA is/was still too rare for > > a serious discussion about this. There is also [1] and probably more... > > > > [1] http://patchwork.ozlabs.org/patch/220137/ > > I believe vast majority of i2c client drivers do not expect that the > transfer buffer they supply in i2c messages are supposed to be DMAable > (unlike USB and SPI buses that had that requirement from the beginning). > > I won't be applying this patch unless we decide that I2C changes the > rules. Understood. Thanks for the clarifications Dmitry and Wolfram. - Sanchayan. -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 0b0f8c1..4391d6c 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -109,6 +109,7 @@ struct edt_ft5x06_ts_data { char name[EDT_NAME_LEN]; struct edt_reg_addr reg_addr; + struct i2c_msg wrmsg[2]; enum edt_ver version; }; @@ -120,26 +121,26 @@ static int edt_ft5x06_ts_readwrite(struct i2c_client *client, u16 wr_len, u8 *wr_buf, u16 rd_len, u8 *rd_buf) { - struct i2c_msg wrmsg[2]; + struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client); int i = 0; int ret; if (wr_len) { - wrmsg[i].addr = client->addr; - wrmsg[i].flags = 0; - wrmsg[i].len = wr_len; - wrmsg[i].buf = wr_buf; + tsdata->wrmsg[i].addr = client->addr; + tsdata->wrmsg[i].flags = 0; + tsdata->wrmsg[i].len = wr_len; + tsdata->wrmsg[i].buf = wr_buf; i++; } if (rd_len) { - wrmsg[i].addr = client->addr; - wrmsg[i].flags = I2C_M_RD; - wrmsg[i].len = rd_len; - wrmsg[i].buf = rd_buf; + tsdata->wrmsg[i].addr = client->addr; + tsdata->wrmsg[i].flags = I2C_M_RD; + tsdata->wrmsg[i].len = rd_len; + tsdata->wrmsg[i].buf = rd_buf; i++; } - ret = i2c_transfer(client->adapter, wrmsg, i); + ret = i2c_transfer(client->adapter, tsdata->wrmsg, i); if (ret < 0) return ret; if (ret != i)
This patch removes the use of i2c_msg locally inside the function. Without this, having i2c_msg locally allocated on stack, being used by i2c_transfer on a platform where the I2C driver uses DMA, results in the debug stack trace being reported during kernel boot in case CONFIG_DMA_API_DEBUG is selected. (See a little below). This was observed while using a touchscreen with this controller on Freescale Vybrid on Colibri Vybrid VF61 module. Vybrid uses the i2c- imx driver which leverages DMA during I2C transfers. [ 1.496997] WARNING: CPU: 0 PID: 1 at lib/dma-debug.c:1169 check_for_stack+0xbc/0xf8() [ 1.508488] fsl-edma 40018000.dma-controller: DMA-API: device driver maps memory from stack [addr=8f44be38] [ 1.525379] Modules linked in: [ 1.531944] CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.12-00004-g4167ee1-dirty #858 [ 1.543485] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 1.553782] [<80014af0>] (unwind_backtrace) from [<800123ec>] (show_stack+0x10/0x14) [ 1.565471] [<800123ec>] (show_stack) from [<8002339c>] (warn_slowpath_common+0x80/0xac) [ 1.577569] [<8002339c>] (warn_slowpath_common) from [<800233f8>] (warn_slowpath_fmt+0x30/0x40) [ 1.590370] [<800233f8>] (warn_slowpath_fmt) from [<80299eac>] (check_for_stack+0xbc/0xf8) [ 1.602843] [<80299eac>] (check_for_stack) from [<8029b050>] (debug_dma_map_page+0xd8/0xf8) [ 1.615573] [<8029b050>] (debug_dma_map_page) from [<803a8274>] (i2c_imx_dma_xfer+0xd0/0x25c) [ 1.628620] [<803a8274>] (i2c_imx_dma_xfer) from [<803a90d0>] (i2c_imx_xfer+0xc04/0xe78) [ 1.641318] [<803a90d0>] (i2c_imx_xfer) from [<803a552c>] (__i2c_transfer+0x140/0x27c) [ 1.653830] [<803a552c>] (__i2c_transfer) from [<803a56fc>] (i2c_transfer+0x94/0xc4) [ 1.666159] [<803a56fc>] (i2c_transfer) from [<8039c21c>] (edt_ft5x06_ts_readwrite+0x74/0x90) [ 1.679432] [<8039c21c>] (edt_ft5x06_ts_readwrite) from [<8039cea8>] (edt_ft5x06_ts_probe+0xc4/0x83c) [ 1.698292] [<8039cea8>] (edt_ft5x06_ts_probe) from [<803a4928>] (i2c_device_probe+0xf8/0x148) [ 1.712047] [<803a4928>] (i2c_device_probe) from [<802f0ef4>] (driver_probe_device+0x174/0x2ac) [ 1.725909] [<802f0ef4>] (driver_probe_device) from [<802f10fc>] (__driver_attach+0x8c/0x90) [ 1.739532] [<802f10fc>] (__driver_attach) from [<802ef494>] (bus_for_each_dev+0x68/0x9c) [ 1.752945] [<802ef494>] (bus_for_each_dev) from [<802f068c>] (bus_add_driver+0x148/0x1f0) [ 1.766495] [<802f068c>] (bus_add_driver) from [<802f16b8>] (driver_register+0x78/0xf8) [ 1.779823] [<802f16b8>] (driver_register) from [<803a5324>] (i2c_register_driver+0x30/0x7c) [ 1.793588] [<803a5324>] (i2c_register_driver) from [<80009634>] (do_one_initcall+0x8c/0x1d4) [ 1.807404] [<80009634>] (do_one_initcall) from [<80773d78>] (kernel_init_freeable+0x124/0x1c4) [ 1.821359] [<80773d78>] (kernel_init_freeable) from [<8055a674>] (kernel_init+0xc/0xe8) [ 1.834797] [<8055a674>] (kernel_init) from [<8000f2c8>] (ret_from_fork+0x14/0x2c) [ 1.847692] ---[ end trace b9ef4ceb9f47043b ]--- Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> --- Hello, Frankly speaking I do not know where the fix should actually be. I2C IMX driver somehow taking care of this or the users of I2C, touchscreen drivers in this case. In my opinion, the fix should be with the touchscreen driver however I did like to have feedback or hear opinions on what is the accepted solution to this. I guess no one ever had the DMA Debug option enabled while using an I2C driver that used DMA so somehow this never came up? I only noticed this since we had a customer requesting for information on this driver and then while checking as I had the DMA debug option enabled from my work on a separate driver, this popped up. My colleague pointed me to [1] but anyways I am not sure and thought I did report this. [1]. http://lkml.iu.edu/hypermail/linux/kernel/1106.0/00237.html Regards, Sanchayan. --- drivers/input/touchscreen/edt-ft5x06.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)