| Message ID | 1304512059-10372-2-git-send-email-tomi.valkeinen@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Tomi Valkeinen |
| Headers | show |
On Wed, May 4, 2011 at 5:27 AM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote: > drivers/video/omap/ contains some lcd drivers which are not used by any > board. They can be removed. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > Cc: Arun C <arunedarath@mistralsolutions.com> > Cc: Koen Kooi <koen@openembedded.org> > Cc: Steve Sakoman <steve@sakoman.com> > --- > drivers/video/omap/Makefile | 4 - > drivers/video/omap/lcd_omap2evm.c | 192 --------------------------------- > drivers/video/omap/lcd_omap3beagle.c | 130 ----------------------- > drivers/video/omap/lcd_omap3evm.c | 193 ---------------------------------- > drivers/video/omap/lcd_overo.c | 180 ------------------------------- > 5 files changed, 0 insertions(+), 699 deletions(-) > delete mode 100644 drivers/video/omap/lcd_omap2evm.c > delete mode 100644 drivers/video/omap/lcd_omap3beagle.c > delete mode 100644 drivers/video/omap/lcd_omap3evm.c > delete mode 100644 drivers/video/omap/lcd_overo.c Acked-by: Steve Sakoman <steve@sakoman.com> Steve -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Op 4 mei 2011, om 14:27 heeft Tomi Valkeinen het volgende geschreven: > drivers/video/omap/ contains some lcd drivers which are not used by any > board. They can be removed. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > Cc: Arun C <arunedarath@mistralsolutions.com> > Cc: Koen Kooi <koen@openembedded.org> > Cc: Steve Sakoman <steve@sakoman.com> Acked-by: Koen Kooi <koen@openembedded.org> > --- > drivers/video/omap/Makefile | 4 - > drivers/video/omap/lcd_omap2evm.c | 192 --------------------------------- > drivers/video/omap/lcd_omap3beagle.c | 130 ----------------------- > drivers/video/omap/lcd_omap3evm.c | 193 ---------------------------------- > drivers/video/omap/lcd_overo.c | 180 ------------------------------- > 5 files changed, 0 insertions(+), 699 deletions(-) > delete mode 100644 drivers/video/omap/lcd_omap2evm.c > delete mode 100644 drivers/video/omap/lcd_omap3beagle.c > delete mode 100644 drivers/video/omap/lcd_omap3evm.c > delete mode 100644 drivers/video/omap/lcd_overo.c > > diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile > index 49226a1..8eec6d7 100644 > --- a/drivers/video/omap/Makefile > +++ b/drivers/video/omap/Makefile > @@ -30,11 +30,7 @@ objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o > objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o > objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o > objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o > -objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o > -objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o > -objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o > objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o > -objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o > objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o > > omapfb-objs := $(objs-yy) > diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c > deleted file mode 100644 > index 7e7a65c..0000000 > --- a/drivers/video/omap/lcd_omap2evm.c > +++ /dev/null > @@ -1,192 +0,0 @@ > -/* > - * LCD panel support for the MISTRAL OMAP2EVM board > - * > - * Author: Arun C <arunedarath@mistralsolutions.com> > - * > - * Derived from drivers/video/omap/lcd_omap3evm.c > - * Derived from drivers/video/omap/lcd-apollon.c > - * > - * This program is free software; you can redistribute it and/or modify it > - * under the terms of the GNU General Public License as published by the > - * Free Software Foundation; either version 2 of the License, or (at your > - * option) any later version. > - * > - * This program is distributed in the hope that it will be useful, but > - * WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > - * General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License along > - * with this program; if not, write to the Free Software Foundation, Inc., > - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > - */ > - > -#include <linux/module.h> > -#include <linux/platform_device.h> > -#include <linux/gpio.h> > -#include <linux/i2c/twl.h> > - > -#include <plat/mux.h> > -#include <asm/mach-types.h> > - > -#include "omapfb.h" > - > -#define LCD_PANEL_ENABLE_GPIO 154 > -#define LCD_PANEL_LR 128 > -#define LCD_PANEL_UD 129 > -#define LCD_PANEL_INI 152 > -#define LCD_PANEL_QVGA 148 > -#define LCD_PANEL_RESB 153 > - > -#define TWL_LED_LEDEN 0x00 > -#define TWL_PWMA_PWMAON 0x00 > -#define TWL_PWMA_PWMAOFF 0x01 > - > -static unsigned int bklight_level; > - > -static int omap2evm_panel_init(struct lcd_panel *panel, > - struct omapfb_device *fbdev) > -{ > - gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable"); > - gpio_request(LCD_PANEL_LR, "LCD lr"); > - gpio_request(LCD_PANEL_UD, "LCD ud"); > - gpio_request(LCD_PANEL_INI, "LCD ini"); > - gpio_request(LCD_PANEL_QVGA, "LCD qvga"); > - gpio_request(LCD_PANEL_RESB, "LCD resb"); > - > - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); > - gpio_direction_output(LCD_PANEL_RESB, 1); > - gpio_direction_output(LCD_PANEL_INI, 1); > - gpio_direction_output(LCD_PANEL_QVGA, 0); > - gpio_direction_output(LCD_PANEL_LR, 1); > - gpio_direction_output(LCD_PANEL_UD, 1); > - > - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); > - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); > - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); > - bklight_level = 100; > - > - return 0; > -} > - > -static void omap2evm_panel_cleanup(struct lcd_panel *panel) > -{ > - gpio_free(LCD_PANEL_RESB); > - gpio_free(LCD_PANEL_QVGA); > - gpio_free(LCD_PANEL_INI); > - gpio_free(LCD_PANEL_UD); > - gpio_free(LCD_PANEL_LR); > - gpio_free(LCD_PANEL_ENABLE_GPIO); > -} > - > -static int omap2evm_panel_enable(struct lcd_panel *panel) > -{ > - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); > - return 0; > -} > - > -static void omap2evm_panel_disable(struct lcd_panel *panel) > -{ > - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); > -} > - > -static unsigned long omap2evm_panel_get_caps(struct lcd_panel *panel) > -{ > - return 0; > -} > - > -static int omap2evm_bklight_setlevel(struct lcd_panel *panel, > - unsigned int level) > -{ > - u8 c; > - if ((level >= 0) && (level <= 100)) { > - c = (125 * (100 - level)) / 100 + 2; > - twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); > - bklight_level = level; > - } > - return 0; > -} > - > -static unsigned int omap2evm_bklight_getlevel(struct lcd_panel *panel) > -{ > - return bklight_level; > -} > - > -static unsigned int omap2evm_bklight_getmaxlevel(struct lcd_panel *panel) > -{ > - return 100; > -} > - > -struct lcd_panel omap2evm_panel = { > - .name = "omap2evm", > - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | > - OMAP_LCDC_INV_HSYNC, > - > - .bpp = 16, > - .data_lines = 18, > - .x_res = 480, > - .y_res = 640, > - .hsw = 3, > - .hfp = 0, > - .hbp = 28, > - .vsw = 2, > - .vfp = 1, > - .vbp = 0, > - > - .pixel_clock = 20000, > - > - .init = omap2evm_panel_init, > - .cleanup = omap2evm_panel_cleanup, > - .enable = omap2evm_panel_enable, > - .disable = omap2evm_panel_disable, > - .get_caps = omap2evm_panel_get_caps, > - .set_bklight_level = omap2evm_bklight_setlevel, > - .get_bklight_level = omap2evm_bklight_getlevel, > - .get_bklight_max = omap2evm_bklight_getmaxlevel, > -}; > - > -static int omap2evm_panel_probe(struct platform_device *pdev) > -{ > - omapfb_register_panel(&omap2evm_panel); > - return 0; > -} > - > -static int omap2evm_panel_remove(struct platform_device *pdev) > -{ > - return 0; > -} > - > -static int omap2evm_panel_suspend(struct platform_device *pdev, > - pm_message_t mesg) > -{ > - return 0; > -} > - > -static int omap2evm_panel_resume(struct platform_device *pdev) > -{ > - return 0; > -} > - > -struct platform_driver omap2evm_panel_driver = { > - .probe = omap2evm_panel_probe, > - .remove = omap2evm_panel_remove, > - .suspend = omap2evm_panel_suspend, > - .resume = omap2evm_panel_resume, > - .driver = { > - .name = "omap2evm_lcd", > - .owner = THIS_MODULE, > - }, > -}; > - > -static int __init omap2evm_panel_drv_init(void) > -{ > - return platform_driver_register(&omap2evm_panel_driver); > -} > - > -static void __exit omap2evm_panel_drv_exit(void) > -{ > - platform_driver_unregister(&omap2evm_panel_driver); > -} > - > -module_init(omap2evm_panel_drv_init); > -module_exit(omap2evm_panel_drv_exit); > diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c > deleted file mode 100644 > index d7c6c3e..0000000 > --- a/drivers/video/omap/lcd_omap3beagle.c > +++ /dev/null > @@ -1,130 +0,0 @@ > -/* > - * LCD panel support for the TI OMAP3 Beagle board > - * > - * Author: Koen Kooi <koen@openembedded.org> > - * > - * Derived from drivers/video/omap/lcd-omap3evm.c > - * > - * This program is free software; you can redistribute it and/or modify it > - * under the terms of the GNU General Public License as published by the > - * Free Software Foundation; either version 2 of the License, or (at your > - * option) any later version. > - * > - * This program is distributed in the hope that it will be useful, but > - * WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > - * General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License along > - * with this program; if not, write to the Free Software Foundation, Inc., > - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > - */ > - > -#include <linux/module.h> > -#include <linux/platform_device.h> > -#include <linux/gpio.h> > -#include <linux/i2c/twl.h> > - > -#include <asm/mach-types.h> > - > -#include "omapfb.h" > - > -#define LCD_PANEL_ENABLE_GPIO 170 > - > -static int omap3beagle_panel_init(struct lcd_panel *panel, > - struct omapfb_device *fbdev) > -{ > - gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable"); > - return 0; > -} > - > -static void omap3beagle_panel_cleanup(struct lcd_panel *panel) > -{ > - gpio_free(LCD_PANEL_ENABLE_GPIO); > -} > - > -static int omap3beagle_panel_enable(struct lcd_panel *panel) > -{ > - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); > - return 0; > -} > - > -static void omap3beagle_panel_disable(struct lcd_panel *panel) > -{ > - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); > -} > - > -static unsigned long omap3beagle_panel_get_caps(struct lcd_panel *panel) > -{ > - return 0; > -} > - > -struct lcd_panel omap3beagle_panel = { > - .name = "omap3beagle", > - .config = OMAP_LCDC_PANEL_TFT, > - > - .bpp = 16, > - .data_lines = 24, > - .x_res = 1024, > - .y_res = 768, > - .hsw = 3, /* hsync_len (4) - 1 */ > - .hfp = 3, /* right_margin (4) - 1 */ > - .hbp = 39, /* left_margin (40) - 1 */ > - .vsw = 1, /* vsync_len (2) - 1 */ > - .vfp = 2, /* lower_margin */ > - .vbp = 7, /* upper_margin (8) - 1 */ > - > - .pixel_clock = 64000, > - > - .init = omap3beagle_panel_init, > - .cleanup = omap3beagle_panel_cleanup, > - .enable = omap3beagle_panel_enable, > - .disable = omap3beagle_panel_disable, > - .get_caps = omap3beagle_panel_get_caps, > -}; > - > -static int omap3beagle_panel_probe(struct platform_device *pdev) > -{ > - omapfb_register_panel(&omap3beagle_panel); > - return 0; > -} > - > -static int omap3beagle_panel_remove(struct platform_device *pdev) > -{ > - return 0; > -} > - > -static int omap3beagle_panel_suspend(struct platform_device *pdev, > - pm_message_t mesg) > -{ > - return 0; > -} > - > -static int omap3beagle_panel_resume(struct platform_device *pdev) > -{ > - return 0; > -} > - > -struct platform_driver omap3beagle_panel_driver = { > - .probe = omap3beagle_panel_probe, > - .remove = omap3beagle_panel_remove, > - .suspend = omap3beagle_panel_suspend, > - .resume = omap3beagle_panel_resume, > - .driver = { > - .name = "omap3beagle_lcd", > - .owner = THIS_MODULE, > - }, > -}; > - > -static int __init omap3beagle_panel_drv_init(void) > -{ > - return platform_driver_register(&omap3beagle_panel_driver); > -} > - > -static void __exit omap3beagle_panel_drv_exit(void) > -{ > - platform_driver_unregister(&omap3beagle_panel_driver); > -} > - > -module_init(omap3beagle_panel_drv_init); > -module_exit(omap3beagle_panel_drv_exit); > diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c > deleted file mode 100644 > index 06840da..0000000 > --- a/drivers/video/omap/lcd_omap3evm.c > +++ /dev/null > @@ -1,193 +0,0 @@ > -/* > - * LCD panel support for the TI OMAP3 EVM board > - * > - * Author: Steve Sakoman <steve@sakoman.com> > - * > - * Derived from drivers/video/omap/lcd-apollon.c > - * > - * This program is free software; you can redistribute it and/or modify it > - * under the terms of the GNU General Public License as published by the > - * Free Software Foundation; either version 2 of the License, or (at your > - * option) any later version. > - * > - * This program is distributed in the hope that it will be useful, but > - * WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > - * General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License along > - * with this program; if not, write to the Free Software Foundation, Inc., > - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > - */ > - > -#include <linux/module.h> > -#include <linux/platform_device.h> > -#include <linux/gpio.h> > -#include <linux/i2c/twl.h> > - > -#include <plat/mux.h> > -#include <asm/mach-types.h> > - > -#include "omapfb.h" > - > -#define LCD_PANEL_ENABLE_GPIO 153 > -#define LCD_PANEL_LR 2 > -#define LCD_PANEL_UD 3 > -#define LCD_PANEL_INI 152 > -#define LCD_PANEL_QVGA 154 > -#define LCD_PANEL_RESB 155 > - > -#define ENABLE_VDAC_DEDICATED 0x03 > -#define ENABLE_VDAC_DEV_GRP 0x20 > -#define ENABLE_VPLL2_DEDICATED 0x05 > -#define ENABLE_VPLL2_DEV_GRP 0xE0 > - > -#define TWL_LED_LEDEN 0x00 > -#define TWL_PWMA_PWMAON 0x00 > -#define TWL_PWMA_PWMAOFF 0x01 > - > -static unsigned int bklight_level; > - > -static int omap3evm_panel_init(struct lcd_panel *panel, > - struct omapfb_device *fbdev) > -{ > - gpio_request(LCD_PANEL_LR, "LCD lr"); > - gpio_request(LCD_PANEL_UD, "LCD ud"); > - gpio_request(LCD_PANEL_INI, "LCD ini"); > - gpio_request(LCD_PANEL_RESB, "LCD resb"); > - gpio_request(LCD_PANEL_QVGA, "LCD qvga"); > - > - gpio_direction_output(LCD_PANEL_RESB, 1); > - gpio_direction_output(LCD_PANEL_INI, 1); > - gpio_direction_output(LCD_PANEL_QVGA, 0); > - gpio_direction_output(LCD_PANEL_LR, 1); > - gpio_direction_output(LCD_PANEL_UD, 1); > - > - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); > - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); > - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); > - bklight_level = 100; > - > - return 0; > -} > - > -static void omap3evm_panel_cleanup(struct lcd_panel *panel) > -{ > - gpio_free(LCD_PANEL_QVGA); > - gpio_free(LCD_PANEL_RESB); > - gpio_free(LCD_PANEL_INI); > - gpio_free(LCD_PANEL_UD); > - gpio_free(LCD_PANEL_LR); > -} > - > -static int omap3evm_panel_enable(struct lcd_panel *panel) > -{ > - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); > - return 0; > -} > - > -static void omap3evm_panel_disable(struct lcd_panel *panel) > -{ > - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); > -} > - > -static unsigned long omap3evm_panel_get_caps(struct lcd_panel *panel) > -{ > - return 0; > -} > - > -static int omap3evm_bklight_setlevel(struct lcd_panel *panel, > - unsigned int level) > -{ > - u8 c; > - if ((level >= 0) && (level <= 100)) { > - c = (125 * (100 - level)) / 100 + 2; > - twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); > - bklight_level = level; > - } > - return 0; > -} > - > -static unsigned int omap3evm_bklight_getlevel(struct lcd_panel *panel) > -{ > - return bklight_level; > -} > - > -static unsigned int omap3evm_bklight_getmaxlevel(struct lcd_panel *panel) > -{ > - return 100; > -} > - > -struct lcd_panel omap3evm_panel = { > - .name = "omap3evm", > - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | > - OMAP_LCDC_INV_HSYNC, > - > - .bpp = 16, > - .data_lines = 18, > - .x_res = 480, > - .y_res = 640, > - .hsw = 3, /* hsync_len (4) - 1 */ > - .hfp = 3, /* right_margin (4) - 1 */ > - .hbp = 39, /* left_margin (40) - 1 */ > - .vsw = 1, /* vsync_len (2) - 1 */ > - .vfp = 2, /* lower_margin */ > - .vbp = 7, /* upper_margin (8) - 1 */ > - > - .pixel_clock = 26000, > - > - .init = omap3evm_panel_init, > - .cleanup = omap3evm_panel_cleanup, > - .enable = omap3evm_panel_enable, > - .disable = omap3evm_panel_disable, > - .get_caps = omap3evm_panel_get_caps, > - .set_bklight_level = omap3evm_bklight_setlevel, > - .get_bklight_level = omap3evm_bklight_getlevel, > - .get_bklight_max = omap3evm_bklight_getmaxlevel, > -}; > - > -static int omap3evm_panel_probe(struct platform_device *pdev) > -{ > - omapfb_register_panel(&omap3evm_panel); > - return 0; > -} > - > -static int omap3evm_panel_remove(struct platform_device *pdev) > -{ > - return 0; > -} > - > -static int omap3evm_panel_suspend(struct platform_device *pdev, > - pm_message_t mesg) > -{ > - return 0; > -} > - > -static int omap3evm_panel_resume(struct platform_device *pdev) > -{ > - return 0; > -} > - > -struct platform_driver omap3evm_panel_driver = { > - .probe = omap3evm_panel_probe, > - .remove = omap3evm_panel_remove, > - .suspend = omap3evm_panel_suspend, > - .resume = omap3evm_panel_resume, > - .driver = { > - .name = "omap3evm_lcd", > - .owner = THIS_MODULE, > - }, > -}; > - > -static int __init omap3evm_panel_drv_init(void) > -{ > - return platform_driver_register(&omap3evm_panel_driver); > -} > - > -static void __exit omap3evm_panel_drv_exit(void) > -{ > - platform_driver_unregister(&omap3evm_panel_driver); > -} > - > -module_init(omap3evm_panel_drv_init); > -module_exit(omap3evm_panel_drv_exit); > diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c > deleted file mode 100644 > index 564933f..0000000 > --- a/drivers/video/omap/lcd_overo.c > +++ /dev/null > @@ -1,180 +0,0 @@ > -/* > - * LCD panel support for the Gumstix Overo > - * > - * Author: Steve Sakoman <steve@sakoman.com> > - * > - * This program is free software; you can redistribute it and/or modify it > - * under the terms of the GNU General Public License as published by the > - * Free Software Foundation; either version 2 of the License, or (at your > - * option) any later version. > - * > - * This program is distributed in the hope that it will be useful, but > - * WITHOUT ANY WARRANTY; without even the implied warranty of > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > - * General Public License for more details. > - * > - * You should have received a copy of the GNU General Public License along > - * with this program; if not, write to the Free Software Foundation, Inc., > - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > - * > - */ > - > -#include <linux/module.h> > -#include <linux/platform_device.h> > -#include <linux/i2c/twl.h> > - > -#include <mach/gpio.h> > -#include <plat/mux.h> > -#include <asm/mach-types.h> > - > -#include "omapfb.h" > - > -#define LCD_ENABLE 144 > - > -static int overo_panel_init(struct lcd_panel *panel, > - struct omapfb_device *fbdev) > -{ > - if ((gpio_request(LCD_ENABLE, "LCD_ENABLE") == 0) && > - (gpio_direction_output(LCD_ENABLE, 1) == 0)) > - gpio_export(LCD_ENABLE, 0); > - else > - printk(KERN_ERR "could not obtain gpio for LCD_ENABLE\n"); > - > - return 0; > -} > - > -static void overo_panel_cleanup(struct lcd_panel *panel) > -{ > - gpio_free(LCD_ENABLE); > -} > - > -static int overo_panel_enable(struct lcd_panel *panel) > -{ > - gpio_set_value(LCD_ENABLE, 1); > - return 0; > -} > - > -static void overo_panel_disable(struct lcd_panel *panel) > -{ > - gpio_set_value(LCD_ENABLE, 0); > -} > - > -static unsigned long overo_panel_get_caps(struct lcd_panel *panel) > -{ > - return 0; > -} > - > -struct lcd_panel overo_panel = { > - .name = "overo", > - .config = OMAP_LCDC_PANEL_TFT, > - .bpp = 16, > - .data_lines = 24, > - > -#if defined CONFIG_FB_OMAP_031M3R > - > - /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ > - .x_res = 640, > - .y_res = 480, > - .hfp = 48, > - .hsw = 32, > - .hbp = 80, > - .vfp = 3, > - .vsw = 4, > - .vbp = 7, > - .pixel_clock = 23500, > - > -#elif defined CONFIG_FB_OMAP_048M3R > - > - /* 800 x 600 @ 60 Hz Reduced blanking VESA CVT 0.48M3-R */ > - .x_res = 800, > - .y_res = 600, > - .hfp = 48, > - .hsw = 32, > - .hbp = 80, > - .vfp = 3, > - .vsw = 4, > - .vbp = 11, > - .pixel_clock = 35500, > - > -#elif defined CONFIG_FB_OMAP_079M3R > - > - /* 1024 x 768 @ 60 Hz Reduced blanking VESA CVT 0.79M3-R */ > - .x_res = 1024, > - .y_res = 768, > - .hfp = 48, > - .hsw = 32, > - .hbp = 80, > - .vfp = 3, > - .vsw = 4, > - .vbp = 15, > - .pixel_clock = 56000, > - > -#elif defined CONFIG_FB_OMAP_092M9R > - > - /* 1280 x 720 @ 60 Hz Reduced blanking VESA CVT 0.92M9-R */ > - .x_res = 1280, > - .y_res = 720, > - .hfp = 48, > - .hsw = 32, > - .hbp = 80, > - .vfp = 3, > - .vsw = 5, > - .vbp = 13, > - .pixel_clock = 64000, > - > -#else > - > - /* use 640 x 480 if no config option */ > - /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ > - .x_res = 640, > - .y_res = 480, > - .hfp = 48, > - .hsw = 32, > - .hbp = 80, > - .vfp = 3, > - .vsw = 4, > - .vbp = 7, > - .pixel_clock = 23500, > - > -#endif > - > - .init = overo_panel_init, > - .cleanup = overo_panel_cleanup, > - .enable = overo_panel_enable, > - .disable = overo_panel_disable, > - .get_caps = overo_panel_get_caps, > -}; > - > -static int overo_panel_probe(struct platform_device *pdev) > -{ > - omapfb_register_panel(&overo_panel); > - return 0; > -} > - > -static int overo_panel_remove(struct platform_device *pdev) > -{ > - /* omapfb does not have unregister_panel */ > - return 0; > -} > - > -static struct platform_driver overo_panel_driver = { > - .probe = overo_panel_probe, > - .remove = overo_panel_remove, > - .driver = { > - .name = "overo_lcd", > - .owner = THIS_MODULE, > - }, > -}; > - > -static int __init overo_panel_drv_init(void) > -{ > - return platform_driver_register(&overo_panel_driver); > -} > - > -static void __exit overo_panel_drv_exit(void) > -{ > - platform_driver_unregister(&overo_panel_driver); > -} > - > -module_init(overo_panel_drv_init); > -module_exit(overo_panel_drv_exit); > -- > 1.7.4.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 49226a1..8eec6d7 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -30,11 +30,7 @@ objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o -objs-y$(CONFIG_MACH_OMAP2EVM) += lcd_omap2evm.o -objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o -objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o -objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o omapfb-objs := $(objs-yy) diff --git a/drivers/video/omap/lcd_omap2evm.c b/drivers/video/omap/lcd_omap2evm.c deleted file mode 100644 index 7e7a65c..0000000 --- a/drivers/video/omap/lcd_omap2evm.c +++ /dev/null @@ -1,192 +0,0 @@ -/* - * LCD panel support for the MISTRAL OMAP2EVM board - * - * Author: Arun C <arunedarath@mistralsolutions.com> - * - * Derived from drivers/video/omap/lcd_omap3evm.c - * Derived from drivers/video/omap/lcd-apollon.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/i2c/twl.h> - -#include <plat/mux.h> -#include <asm/mach-types.h> - -#include "omapfb.h" - -#define LCD_PANEL_ENABLE_GPIO 154 -#define LCD_PANEL_LR 128 -#define LCD_PANEL_UD 129 -#define LCD_PANEL_INI 152 -#define LCD_PANEL_QVGA 148 -#define LCD_PANEL_RESB 153 - -#define TWL_LED_LEDEN 0x00 -#define TWL_PWMA_PWMAON 0x00 -#define TWL_PWMA_PWMAOFF 0x01 - -static unsigned int bklight_level; - -static int omap2evm_panel_init(struct lcd_panel *panel, - struct omapfb_device *fbdev) -{ - gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable"); - gpio_request(LCD_PANEL_LR, "LCD lr"); - gpio_request(LCD_PANEL_UD, "LCD ud"); - gpio_request(LCD_PANEL_INI, "LCD ini"); - gpio_request(LCD_PANEL_QVGA, "LCD qvga"); - gpio_request(LCD_PANEL_RESB, "LCD resb"); - - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1); - gpio_direction_output(LCD_PANEL_RESB, 1); - gpio_direction_output(LCD_PANEL_INI, 1); - gpio_direction_output(LCD_PANEL_QVGA, 0); - gpio_direction_output(LCD_PANEL_LR, 1); - gpio_direction_output(LCD_PANEL_UD, 1); - - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); - bklight_level = 100; - - return 0; -} - -static void omap2evm_panel_cleanup(struct lcd_panel *panel) -{ - gpio_free(LCD_PANEL_RESB); - gpio_free(LCD_PANEL_QVGA); - gpio_free(LCD_PANEL_INI); - gpio_free(LCD_PANEL_UD); - gpio_free(LCD_PANEL_LR); - gpio_free(LCD_PANEL_ENABLE_GPIO); -} - -static int omap2evm_panel_enable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); - return 0; -} - -static void omap2evm_panel_disable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); -} - -static unsigned long omap2evm_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -static int omap2evm_bklight_setlevel(struct lcd_panel *panel, - unsigned int level) -{ - u8 c; - if ((level >= 0) && (level <= 100)) { - c = (125 * (100 - level)) / 100 + 2; - twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); - bklight_level = level; - } - return 0; -} - -static unsigned int omap2evm_bklight_getlevel(struct lcd_panel *panel) -{ - return bklight_level; -} - -static unsigned int omap2evm_bklight_getmaxlevel(struct lcd_panel *panel) -{ - return 100; -} - -struct lcd_panel omap2evm_panel = { - .name = "omap2evm", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC, - - .bpp = 16, - .data_lines = 18, - .x_res = 480, - .y_res = 640, - .hsw = 3, - .hfp = 0, - .hbp = 28, - .vsw = 2, - .vfp = 1, - .vbp = 0, - - .pixel_clock = 20000, - - .init = omap2evm_panel_init, - .cleanup = omap2evm_panel_cleanup, - .enable = omap2evm_panel_enable, - .disable = omap2evm_panel_disable, - .get_caps = omap2evm_panel_get_caps, - .set_bklight_level = omap2evm_bklight_setlevel, - .get_bklight_level = omap2evm_bklight_getlevel, - .get_bklight_max = omap2evm_bklight_getmaxlevel, -}; - -static int omap2evm_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&omap2evm_panel); - return 0; -} - -static int omap2evm_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int omap2evm_panel_suspend(struct platform_device *pdev, - pm_message_t mesg) -{ - return 0; -} - -static int omap2evm_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver omap2evm_panel_driver = { - .probe = omap2evm_panel_probe, - .remove = omap2evm_panel_remove, - .suspend = omap2evm_panel_suspend, - .resume = omap2evm_panel_resume, - .driver = { - .name = "omap2evm_lcd", - .owner = THIS_MODULE, - }, -}; - -static int __init omap2evm_panel_drv_init(void) -{ - return platform_driver_register(&omap2evm_panel_driver); -} - -static void __exit omap2evm_panel_drv_exit(void) -{ - platform_driver_unregister(&omap2evm_panel_driver); -} - -module_init(omap2evm_panel_drv_init); -module_exit(omap2evm_panel_drv_exit); diff --git a/drivers/video/omap/lcd_omap3beagle.c b/drivers/video/omap/lcd_omap3beagle.c deleted file mode 100644 index d7c6c3e..0000000 --- a/drivers/video/omap/lcd_omap3beagle.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * LCD panel support for the TI OMAP3 Beagle board - * - * Author: Koen Kooi <koen@openembedded.org> - * - * Derived from drivers/video/omap/lcd-omap3evm.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/i2c/twl.h> - -#include <asm/mach-types.h> - -#include "omapfb.h" - -#define LCD_PANEL_ENABLE_GPIO 170 - -static int omap3beagle_panel_init(struct lcd_panel *panel, - struct omapfb_device *fbdev) -{ - gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable"); - return 0; -} - -static void omap3beagle_panel_cleanup(struct lcd_panel *panel) -{ - gpio_free(LCD_PANEL_ENABLE_GPIO); -} - -static int omap3beagle_panel_enable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); - return 0; -} - -static void omap3beagle_panel_disable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); -} - -static unsigned long omap3beagle_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -struct lcd_panel omap3beagle_panel = { - .name = "omap3beagle", - .config = OMAP_LCDC_PANEL_TFT, - - .bpp = 16, - .data_lines = 24, - .x_res = 1024, - .y_res = 768, - .hsw = 3, /* hsync_len (4) - 1 */ - .hfp = 3, /* right_margin (4) - 1 */ - .hbp = 39, /* left_margin (40) - 1 */ - .vsw = 1, /* vsync_len (2) - 1 */ - .vfp = 2, /* lower_margin */ - .vbp = 7, /* upper_margin (8) - 1 */ - - .pixel_clock = 64000, - - .init = omap3beagle_panel_init, - .cleanup = omap3beagle_panel_cleanup, - .enable = omap3beagle_panel_enable, - .disable = omap3beagle_panel_disable, - .get_caps = omap3beagle_panel_get_caps, -}; - -static int omap3beagle_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&omap3beagle_panel); - return 0; -} - -static int omap3beagle_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int omap3beagle_panel_suspend(struct platform_device *pdev, - pm_message_t mesg) -{ - return 0; -} - -static int omap3beagle_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver omap3beagle_panel_driver = { - .probe = omap3beagle_panel_probe, - .remove = omap3beagle_panel_remove, - .suspend = omap3beagle_panel_suspend, - .resume = omap3beagle_panel_resume, - .driver = { - .name = "omap3beagle_lcd", - .owner = THIS_MODULE, - }, -}; - -static int __init omap3beagle_panel_drv_init(void) -{ - return platform_driver_register(&omap3beagle_panel_driver); -} - -static void __exit omap3beagle_panel_drv_exit(void) -{ - platform_driver_unregister(&omap3beagle_panel_driver); -} - -module_init(omap3beagle_panel_drv_init); -module_exit(omap3beagle_panel_drv_exit); diff --git a/drivers/video/omap/lcd_omap3evm.c b/drivers/video/omap/lcd_omap3evm.c deleted file mode 100644 index 06840da..0000000 --- a/drivers/video/omap/lcd_omap3evm.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * LCD panel support for the TI OMAP3 EVM board - * - * Author: Steve Sakoman <steve@sakoman.com> - * - * Derived from drivers/video/omap/lcd-apollon.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/i2c/twl.h> - -#include <plat/mux.h> -#include <asm/mach-types.h> - -#include "omapfb.h" - -#define LCD_PANEL_ENABLE_GPIO 153 -#define LCD_PANEL_LR 2 -#define LCD_PANEL_UD 3 -#define LCD_PANEL_INI 152 -#define LCD_PANEL_QVGA 154 -#define LCD_PANEL_RESB 155 - -#define ENABLE_VDAC_DEDICATED 0x03 -#define ENABLE_VDAC_DEV_GRP 0x20 -#define ENABLE_VPLL2_DEDICATED 0x05 -#define ENABLE_VPLL2_DEV_GRP 0xE0 - -#define TWL_LED_LEDEN 0x00 -#define TWL_PWMA_PWMAON 0x00 -#define TWL_PWMA_PWMAOFF 0x01 - -static unsigned int bklight_level; - -static int omap3evm_panel_init(struct lcd_panel *panel, - struct omapfb_device *fbdev) -{ - gpio_request(LCD_PANEL_LR, "LCD lr"); - gpio_request(LCD_PANEL_UD, "LCD ud"); - gpio_request(LCD_PANEL_INI, "LCD ini"); - gpio_request(LCD_PANEL_RESB, "LCD resb"); - gpio_request(LCD_PANEL_QVGA, "LCD qvga"); - - gpio_direction_output(LCD_PANEL_RESB, 1); - gpio_direction_output(LCD_PANEL_INI, 1); - gpio_direction_output(LCD_PANEL_QVGA, 0); - gpio_direction_output(LCD_PANEL_LR, 1); - gpio_direction_output(LCD_PANEL_UD, 1); - - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON); - twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF); - bklight_level = 100; - - return 0; -} - -static void omap3evm_panel_cleanup(struct lcd_panel *panel) -{ - gpio_free(LCD_PANEL_QVGA); - gpio_free(LCD_PANEL_RESB); - gpio_free(LCD_PANEL_INI); - gpio_free(LCD_PANEL_UD); - gpio_free(LCD_PANEL_LR); -} - -static int omap3evm_panel_enable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0); - return 0; -} - -static void omap3evm_panel_disable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1); -} - -static unsigned long omap3evm_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -static int omap3evm_bklight_setlevel(struct lcd_panel *panel, - unsigned int level) -{ - u8 c; - if ((level >= 0) && (level <= 100)) { - c = (125 * (100 - level)) / 100 + 2; - twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF); - bklight_level = level; - } - return 0; -} - -static unsigned int omap3evm_bklight_getlevel(struct lcd_panel *panel) -{ - return bklight_level; -} - -static unsigned int omap3evm_bklight_getmaxlevel(struct lcd_panel *panel) -{ - return 100; -} - -struct lcd_panel omap3evm_panel = { - .name = "omap3evm", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC, - - .bpp = 16, - .data_lines = 18, - .x_res = 480, - .y_res = 640, - .hsw = 3, /* hsync_len (4) - 1 */ - .hfp = 3, /* right_margin (4) - 1 */ - .hbp = 39, /* left_margin (40) - 1 */ - .vsw = 1, /* vsync_len (2) - 1 */ - .vfp = 2, /* lower_margin */ - .vbp = 7, /* upper_margin (8) - 1 */ - - .pixel_clock = 26000, - - .init = omap3evm_panel_init, - .cleanup = omap3evm_panel_cleanup, - .enable = omap3evm_panel_enable, - .disable = omap3evm_panel_disable, - .get_caps = omap3evm_panel_get_caps, - .set_bklight_level = omap3evm_bklight_setlevel, - .get_bklight_level = omap3evm_bklight_getlevel, - .get_bklight_max = omap3evm_bklight_getmaxlevel, -}; - -static int omap3evm_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&omap3evm_panel); - return 0; -} - -static int omap3evm_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int omap3evm_panel_suspend(struct platform_device *pdev, - pm_message_t mesg) -{ - return 0; -} - -static int omap3evm_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver omap3evm_panel_driver = { - .probe = omap3evm_panel_probe, - .remove = omap3evm_panel_remove, - .suspend = omap3evm_panel_suspend, - .resume = omap3evm_panel_resume, - .driver = { - .name = "omap3evm_lcd", - .owner = THIS_MODULE, - }, -}; - -static int __init omap3evm_panel_drv_init(void) -{ - return platform_driver_register(&omap3evm_panel_driver); -} - -static void __exit omap3evm_panel_drv_exit(void) -{ - platform_driver_unregister(&omap3evm_panel_driver); -} - -module_init(omap3evm_panel_drv_init); -module_exit(omap3evm_panel_drv_exit); diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c deleted file mode 100644 index 564933f..0000000 --- a/drivers/video/omap/lcd_overo.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * LCD panel support for the Gumstix Overo - * - * Author: Steve Sakoman <steve@sakoman.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/i2c/twl.h> - -#include <mach/gpio.h> -#include <plat/mux.h> -#include <asm/mach-types.h> - -#include "omapfb.h" - -#define LCD_ENABLE 144 - -static int overo_panel_init(struct lcd_panel *panel, - struct omapfb_device *fbdev) -{ - if ((gpio_request(LCD_ENABLE, "LCD_ENABLE") == 0) && - (gpio_direction_output(LCD_ENABLE, 1) == 0)) - gpio_export(LCD_ENABLE, 0); - else - printk(KERN_ERR "could not obtain gpio for LCD_ENABLE\n"); - - return 0; -} - -static void overo_panel_cleanup(struct lcd_panel *panel) -{ - gpio_free(LCD_ENABLE); -} - -static int overo_panel_enable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_ENABLE, 1); - return 0; -} - -static void overo_panel_disable(struct lcd_panel *panel) -{ - gpio_set_value(LCD_ENABLE, 0); -} - -static unsigned long overo_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -struct lcd_panel overo_panel = { - .name = "overo", - .config = OMAP_LCDC_PANEL_TFT, - .bpp = 16, - .data_lines = 24, - -#if defined CONFIG_FB_OMAP_031M3R - - /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ - .x_res = 640, - .y_res = 480, - .hfp = 48, - .hsw = 32, - .hbp = 80, - .vfp = 3, - .vsw = 4, - .vbp = 7, - .pixel_clock = 23500, - -#elif defined CONFIG_FB_OMAP_048M3R - - /* 800 x 600 @ 60 Hz Reduced blanking VESA CVT 0.48M3-R */ - .x_res = 800, - .y_res = 600, - .hfp = 48, - .hsw = 32, - .hbp = 80, - .vfp = 3, - .vsw = 4, - .vbp = 11, - .pixel_clock = 35500, - -#elif defined CONFIG_FB_OMAP_079M3R - - /* 1024 x 768 @ 60 Hz Reduced blanking VESA CVT 0.79M3-R */ - .x_res = 1024, - .y_res = 768, - .hfp = 48, - .hsw = 32, - .hbp = 80, - .vfp = 3, - .vsw = 4, - .vbp = 15, - .pixel_clock = 56000, - -#elif defined CONFIG_FB_OMAP_092M9R - - /* 1280 x 720 @ 60 Hz Reduced blanking VESA CVT 0.92M9-R */ - .x_res = 1280, - .y_res = 720, - .hfp = 48, - .hsw = 32, - .hbp = 80, - .vfp = 3, - .vsw = 5, - .vbp = 13, - .pixel_clock = 64000, - -#else - - /* use 640 x 480 if no config option */ - /* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */ - .x_res = 640, - .y_res = 480, - .hfp = 48, - .hsw = 32, - .hbp = 80, - .vfp = 3, - .vsw = 4, - .vbp = 7, - .pixel_clock = 23500, - -#endif - - .init = overo_panel_init, - .cleanup = overo_panel_cleanup, - .enable = overo_panel_enable, - .disable = overo_panel_disable, - .get_caps = overo_panel_get_caps, -}; - -static int overo_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&overo_panel); - return 0; -} - -static int overo_panel_remove(struct platform_device *pdev) -{ - /* omapfb does not have unregister_panel */ - return 0; -} - -static struct platform_driver overo_panel_driver = { - .probe = overo_panel_probe, - .remove = overo_panel_remove, - .driver = { - .name = "overo_lcd", - .owner = THIS_MODULE, - }, -}; - -static int __init overo_panel_drv_init(void) -{ - return platform_driver_register(&overo_panel_driver); -} - -static void __exit overo_panel_drv_exit(void) -{ - platform_driver_unregister(&overo_panel_driver); -} - -module_init(overo_panel_drv_init); -module_exit(overo_panel_drv_exit);
drivers/video/omap/ contains some lcd drivers which are not used by any board. They can be removed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Arun C <arunedarath@mistralsolutions.com> Cc: Koen Kooi <koen@openembedded.org> Cc: Steve Sakoman <steve@sakoman.com> --- drivers/video/omap/Makefile | 4 - drivers/video/omap/lcd_omap2evm.c | 192 --------------------------------- drivers/video/omap/lcd_omap3beagle.c | 130 ----------------------- drivers/video/omap/lcd_omap3evm.c | 193 ---------------------------------- drivers/video/omap/lcd_overo.c | 180 ------------------------------- 5 files changed, 0 insertions(+), 699 deletions(-) delete mode 100644 drivers/video/omap/lcd_omap2evm.c delete mode 100644 drivers/video/omap/lcd_omap3beagle.c delete mode 100644 drivers/video/omap/lcd_omap3evm.c delete mode 100644 drivers/video/omap/lcd_overo.c