Message ID | 1304585595-10023-1-git-send-email-grinberg@compulab.co.il (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 05/05/11 11:53, Igor Grinberg wrote: > cm-t3730 is basically the same board as cm-t35, but has DM3730 SoC > assembled and therefore some changes are required. > > Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> > --- > arch/arm/mach-omap2/Kconfig | 2 +- > arch/arm/mach-omap2/board-cm-t35.c | 62 +++++++++++++++++++++++++++--------- > 2 files changed, 48 insertions(+), 16 deletions(-) Acked-by: Mike Rapoport <mike@compulab.co.il> > > diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig > index b997a35..920b6bc 100644 > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -266,7 +266,7 @@ config MACH_OMAP_ZOOM3 > select REGULATOR_FIXED_VOLTAGE > > config MACH_CM_T35 > - bool "CompuLab CM-T35 module" > + bool "CompuLab CM-T35/CM-T3730 modules" > depends on ARCH_OMAP3 > default y > select OMAP_PACKAGE_CUS > diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c > index 6063be8..c0f6ce0 100644 > --- a/arch/arm/mach-omap2/board-cm-t35.c > +++ b/arch/arm/mach-omap2/board-cm-t35.c > @@ -524,7 +524,7 @@ static void __init cm_t35_init_early(void) > } > > #ifdef CONFIG_OMAP_MUX > -static struct omap_board_mux board_mux[] __initdata = { > +static struct omap_board_mux cm_t35_common_board_mux[] __initdata = { > /* nCS and IRQ for CM-T35 ethernet */ > OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), > OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), > @@ -580,17 +580,12 @@ static struct omap_board_mux board_mux[] __initdata = { > OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), > > - /* DSS */ > + /* common DSS */ > OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > + > OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > @@ -603,12 +598,6 @@ static struct omap_board_mux board_mux[] __initdata = { > OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), > > /* display controls */ > OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), > @@ -621,6 +610,39 @@ static struct omap_board_mux board_mux[] __initdata = { > > { .reg_offset = OMAP_MUX_TERMINATOR }, > }; > + > +static void cm_t35_mux_init(void) > +{ > + int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; > + > + omap3_mux_init(cm_t35_common_board_mux, OMAP_PACKAGE_CUS); > + > + if (cpu_is_omap34xx()) { > + omap_mux_init_signal("gpio_70", mux_mode); > + omap_mux_init_signal("gpio_71", mux_mode); > + omap_mux_init_signal("gpio_72", mux_mode); > + omap_mux_init_signal("gpio_73", mux_mode); > + omap_mux_init_signal("gpio_74", mux_mode); > + omap_mux_init_signal("gpio_75", mux_mode); > + } else if (cpu_is_omap3630()) { > + mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; > + omap_mux_init_signal("sys_boot0", mux_mode); > + omap_mux_init_signal("sys_boot1", mux_mode); > + omap_mux_init_signal("sys_boot3", mux_mode); > + omap_mux_init_signal("sys_boot4", mux_mode); > + omap_mux_init_signal("sys_boot5", mux_mode); > + omap_mux_init_signal("sys_boot6", mux_mode); > + } > + > + omap_mux_init_signal("dss_data18", mux_mode); > + omap_mux_init_signal("dss_data19", mux_mode); > + omap_mux_init_signal("dss_data20", mux_mode); > + omap_mux_init_signal("dss_data21", mux_mode); > + omap_mux_init_signal("dss_data22", mux_mode); > + omap_mux_init_signal("dss_data23", mux_mode); > +} > +#else > +static inline void cm_t35_mux_init(void) {} > #endif > > static struct omap_board_config_kernel cm_t35_config[] __initdata = { > @@ -630,7 +652,7 @@ static void __init cm_t35_init(void) > { > omap_board_config = cm_t35_config; > omap_board_config_size = ARRAY_SIZE(cm_t35_config); > - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); > + cm_t35_mux_init(); > omap_serial_init(); > cm_t35_init_i2c(); > cm_t35_init_nand(); > @@ -652,3 +674,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35") > .init_machine = cm_t35_init, > .timer = &omap_timer, > MACHINE_END > + > +MACHINE_START(CM_T3730, "Compulab CM-T3730") > + .boot_params = 0x80000100, > + .reserve = omap_reserve, > + .map_io = omap3_map_io, > + .init_early = cm_t35_init_early, > + .init_irq = omap_init_irq, > + .init_machine = cm_t35_init, > + .timer = &omap_timer, > +MACHINE_END
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b997a35..920b6bc 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -266,7 +266,7 @@ config MACH_OMAP_ZOOM3 select REGULATOR_FIXED_VOLTAGE config MACH_CM_T35 - bool "CompuLab CM-T35 module" + bool "CompuLab CM-T35/CM-T3730 modules" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CUS diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 6063be8..c0f6ce0 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -524,7 +524,7 @@ static void __init cm_t35_init_early(void) } #ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { +static struct omap_board_mux cm_t35_common_board_mux[] __initdata = { /* nCS and IRQ for CM-T35 ethernet */ OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), @@ -580,17 +580,12 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - /* DSS */ + /* common DSS */ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), @@ -603,12 +598,6 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), /* display controls */ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -621,6 +610,39 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; + +static void cm_t35_mux_init(void) +{ + int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; + + omap3_mux_init(cm_t35_common_board_mux, OMAP_PACKAGE_CUS); + + if (cpu_is_omap34xx()) { + omap_mux_init_signal("gpio_70", mux_mode); + omap_mux_init_signal("gpio_71", mux_mode); + omap_mux_init_signal("gpio_72", mux_mode); + omap_mux_init_signal("gpio_73", mux_mode); + omap_mux_init_signal("gpio_74", mux_mode); + omap_mux_init_signal("gpio_75", mux_mode); + } else if (cpu_is_omap3630()) { + mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; + omap_mux_init_signal("sys_boot0", mux_mode); + omap_mux_init_signal("sys_boot1", mux_mode); + omap_mux_init_signal("sys_boot3", mux_mode); + omap_mux_init_signal("sys_boot4", mux_mode); + omap_mux_init_signal("sys_boot5", mux_mode); + omap_mux_init_signal("sys_boot6", mux_mode); + } + + omap_mux_init_signal("dss_data18", mux_mode); + omap_mux_init_signal("dss_data19", mux_mode); + omap_mux_init_signal("dss_data20", mux_mode); + omap_mux_init_signal("dss_data21", mux_mode); + omap_mux_init_signal("dss_data22", mux_mode); + omap_mux_init_signal("dss_data23", mux_mode); +} +#else +static inline void cm_t35_mux_init(void) {} #endif static struct omap_board_config_kernel cm_t35_config[] __initdata = { @@ -630,7 +652,7 @@ static void __init cm_t35_init(void) { omap_board_config = cm_t35_config; omap_board_config_size = ARRAY_SIZE(cm_t35_config); - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); + cm_t35_mux_init(); omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); @@ -652,3 +674,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .init_machine = cm_t35_init, .timer = &omap_timer, MACHINE_END + +MACHINE_START(CM_T3730, "Compulab CM-T3730") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = cm_t35_init_early, + .init_irq = omap_init_irq, + .init_machine = cm_t35_init, + .timer = &omap_timer, +MACHINE_END
cm-t3730 is basically the same board as cm-t35, but has DM3730 SoC assembled and therefore some changes are required. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> --- arch/arm/mach-omap2/Kconfig | 2 +- arch/arm/mach-omap2/board-cm-t35.c | 62 +++++++++++++++++++++++++++--------- 2 files changed, 48 insertions(+), 16 deletions(-)