@@ -637,6 +637,12 @@
atmel,clk-output-range = <0 83000000>;
};
+ pdmic_clk: pdmic_clk {
+ #clock-cells = <0>;
+ reg = <48>;
+ atmel,clk-output-range = <0 83000000>;
+ };
+
i2s0_clk: i2s0_clk {
#clock-cells = <0>;
reg = <54>;
@@ -763,6 +769,11 @@
atmel,clk-output-range = <0 83000000>;
};
+ pdmic_gclk: pdmic_gclk {
+ #clock-cells = <0>;
+ reg = <48>;
+ };
+
i2s0_gclk: i2s0_gclk {
#clock-cells = <0>;
reg = <54>;
@@ -852,6 +863,19 @@
clock-names = "t0_clk", "slow_clk";
};
+ pdmic: pdmic@f8018000 {
+ compatible = "atmel,sama5d2-pdmic";
+ reg = <0xf8018000 0x124>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(50))>;
+ dma-names = "rx";
+ clocks = <&pdmic_clk>, <&pdmic_gclk>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
uart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x100>;
Add pdmic node.` Signed-off-by: Songjun Wu <songjun.wu@atmel.com> --- arch/arm/boot/dts/sama5d2.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+)