| Message ID | 1451874827-2531-3-git-send-email-wsa@the-dreams.de (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
On 01/04/2016 03:33 AM, Wolfram Sang wrote: > From: Wolfram Sang <wsa+renesas@sang-engineering.com> > > Fix this typo, consequently used over both files :) > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-sh" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Wolfram, Thank you for the patch. On Monday 04 January 2016 03:33:47 Wolfram Sang wrote: > From: Wolfram Sang <wsa+renesas@sang-engineering.com> > > Fix this typo, consequently used over both files :) > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > --- > drivers/gpu/drm/i2c/adv7511.c | 22 +++++++++++----------- > drivers/gpu/drm/i2c/adv7511.h | 12 ++++++------ > 2 files changed, 17 insertions(+), 17 deletions(-) > > diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c > index 50a861b12346c4..c03c1ea53fd042 100644 > --- a/drivers/gpu/drm/i2c/adv7511.c > +++ b/drivers/gpu/drm/i2c/adv7511.c > @@ -378,16 +378,16 @@ static void adv7511_power_on(struct adv7511 *adv7511) > } > > /* > - * Per spec it is allowed to pulse the HDP signal to indicate that the > + * Per spec it is allowed to pulse the HPD signal to indicate that the > * EDID information has changed. Some monitors do this when they wakeup > - * from standby or are enabled. When the HDP goes low the adv7511 is > + * from standby or are enabled. When the HPD goes low the adv7511 is > * reset and the outputs are disabled which might cause the monitor to > - * go to standby again. To avoid this we ignore the HDP pin for the > + * go to standby again. To avoid this we ignore the HPD pin for the > * first few seconds after enabling the output. > */ > regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, > - ADV7511_REG_POWER2_HDP_SRC_MASK, > - ADV7511_REG_POWER2_HDP_SRC_NONE); > + ADV7511_REG_POWER2_HPD_SRC_MASK, > + ADV7511_REG_POWER2_HPD_SRC_NONE); > > /* > * Most of the registers are reset during power down or when HPD is low. > @@ -421,9 +421,9 @@ static bool adv7511_hpd(struct adv7511 *adv7511) > if (ret < 0) > return false; > > - if (irq0 & ADV7511_INT0_HDP) { > + if (irq0 & ADV7511_INT0_HPD) { > regmap_write(adv7511->regmap, ADV7511_REG_INT(0), > - ADV7511_INT0_HDP); > + ADV7511_INT0_HPD); > return true; > } > > @@ -446,7 +446,7 @@ static int adv7511_irq_process(struct adv7511 *adv7511) > regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0); > regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1); > > - if (irq0 & ADV7511_INT0_HDP && adv7511->encoder) > + if (irq0 & ADV7511_INT0_HPD && adv7511->encoder) > drm_helper_hpd_irq_event(adv7511->encoder->dev); > > if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) { > @@ -648,10 +648,10 @@ adv7511_encoder_detect(struct drm_encoder *encoder, > if (adv7511->status == connector_status_connected) > status = connector_status_disconnected; > } else { > - /* Renable HDP sensing */ > + /* Renable HPD sensing */ > regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, > - ADV7511_REG_POWER2_HDP_SRC_MASK, > - ADV7511_REG_POWER2_HDP_SRC_BOTH); > + ADV7511_REG_POWER2_HPD_SRC_MASK, > + ADV7511_REG_POWER2_HPD_SRC_BOTH); > } > > adv7511->status = status; > diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/i2c/adv7511.h > index 6599ed538426d6..38515b30cedfc8 100644 > --- a/drivers/gpu/drm/i2c/adv7511.h > +++ b/drivers/gpu/drm/i2c/adv7511.h > @@ -90,7 +90,7 @@ > #define ADV7511_CSC_ENABLE BIT(7) > #define ADV7511_CSC_UPDATE_MODE BIT(5) > > -#define ADV7511_INT0_HDP BIT(7) > +#define ADV7511_INT0_HPD BIT(7) > #define ADV7511_INT0_VSYNC BIT(5) > #define ADV7511_INT0_AUDIO_FIFO_FULL BIT(4) > #define ADV7511_INT0_EDID_READY BIT(2) > @@ -157,11 +157,11 @@ > #define ADV7511_PACKET_ENABLE_SPARE2 BIT(1) > #define ADV7511_PACKET_ENABLE_SPARE1 BIT(0) > > -#define ADV7511_REG_POWER2_HDP_SRC_MASK 0xc0 > -#define ADV7511_REG_POWER2_HDP_SRC_BOTH 0x00 > -#define ADV7511_REG_POWER2_HDP_SRC_HDP 0x40 > -#define ADV7511_REG_POWER2_HDP_SRC_CEC 0x80 > -#define ADV7511_REG_POWER2_HDP_SRC_NONE 0xc0 > +#define ADV7511_REG_POWER2_HPD_SRC_MASK 0xc0 > +#define ADV7511_REG_POWER2_HPD_SRC_BOTH 0x00 > +#define ADV7511_REG_POWER2_HPD_SRC_HPD 0x40 > +#define ADV7511_REG_POWER2_HPD_SRC_CEC 0x80 > +#define ADV7511_REG_POWER2_HPD_SRC_NONE 0xc0 > #define ADV7511_REG_POWER2_TDMS_ENABLE BIT(4) > #define ADV7511_REG_POWER2_GATE_INPUT_CLK BIT(0)
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c index 50a861b12346c4..c03c1ea53fd042 100644 --- a/drivers/gpu/drm/i2c/adv7511.c +++ b/drivers/gpu/drm/i2c/adv7511.c @@ -378,16 +378,16 @@ static void adv7511_power_on(struct adv7511 *adv7511) } /* - * Per spec it is allowed to pulse the HDP signal to indicate that the + * Per spec it is allowed to pulse the HPD signal to indicate that the * EDID information has changed. Some monitors do this when they wakeup - * from standby or are enabled. When the HDP goes low the adv7511 is + * from standby or are enabled. When the HPD goes low the adv7511 is * reset and the outputs are disabled which might cause the monitor to - * go to standby again. To avoid this we ignore the HDP pin for the + * go to standby again. To avoid this we ignore the HPD pin for the * first few seconds after enabling the output. */ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, - ADV7511_REG_POWER2_HDP_SRC_MASK, - ADV7511_REG_POWER2_HDP_SRC_NONE); + ADV7511_REG_POWER2_HPD_SRC_MASK, + ADV7511_REG_POWER2_HPD_SRC_NONE); /* * Most of the registers are reset during power down or when HPD is low. @@ -421,9 +421,9 @@ static bool adv7511_hpd(struct adv7511 *adv7511) if (ret < 0) return false; - if (irq0 & ADV7511_INT0_HDP) { + if (irq0 & ADV7511_INT0_HPD) { regmap_write(adv7511->regmap, ADV7511_REG_INT(0), - ADV7511_INT0_HDP); + ADV7511_INT0_HPD); return true; } @@ -446,7 +446,7 @@ static int adv7511_irq_process(struct adv7511 *adv7511) regmap_write(adv7511->regmap, ADV7511_REG_INT(0), irq0); regmap_write(adv7511->regmap, ADV7511_REG_INT(1), irq1); - if (irq0 & ADV7511_INT0_HDP && adv7511->encoder) + if (irq0 & ADV7511_INT0_HPD && adv7511->encoder) drm_helper_hpd_irq_event(adv7511->encoder->dev); if (irq0 & ADV7511_INT0_EDID_READY || irq1 & ADV7511_INT1_DDC_ERROR) { @@ -648,10 +648,10 @@ adv7511_encoder_detect(struct drm_encoder *encoder, if (adv7511->status == connector_status_connected) status = connector_status_disconnected; } else { - /* Renable HDP sensing */ + /* Renable HPD sensing */ regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2, - ADV7511_REG_POWER2_HDP_SRC_MASK, - ADV7511_REG_POWER2_HDP_SRC_BOTH); + ADV7511_REG_POWER2_HPD_SRC_MASK, + ADV7511_REG_POWER2_HPD_SRC_BOTH); } adv7511->status = status; diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/i2c/adv7511.h index 6599ed538426d6..38515b30cedfc8 100644 --- a/drivers/gpu/drm/i2c/adv7511.h +++ b/drivers/gpu/drm/i2c/adv7511.h @@ -90,7 +90,7 @@ #define ADV7511_CSC_ENABLE BIT(7) #define ADV7511_CSC_UPDATE_MODE BIT(5) -#define ADV7511_INT0_HDP BIT(7) +#define ADV7511_INT0_HPD BIT(7) #define ADV7511_INT0_VSYNC BIT(5) #define ADV7511_INT0_AUDIO_FIFO_FULL BIT(4) #define ADV7511_INT0_EDID_READY BIT(2) @@ -157,11 +157,11 @@ #define ADV7511_PACKET_ENABLE_SPARE2 BIT(1) #define ADV7511_PACKET_ENABLE_SPARE1 BIT(0) -#define ADV7511_REG_POWER2_HDP_SRC_MASK 0xc0 -#define ADV7511_REG_POWER2_HDP_SRC_BOTH 0x00 -#define ADV7511_REG_POWER2_HDP_SRC_HDP 0x40 -#define ADV7511_REG_POWER2_HDP_SRC_CEC 0x80 -#define ADV7511_REG_POWER2_HDP_SRC_NONE 0xc0 +#define ADV7511_REG_POWER2_HPD_SRC_MASK 0xc0 +#define ADV7511_REG_POWER2_HPD_SRC_BOTH 0x00 +#define ADV7511_REG_POWER2_HPD_SRC_HPD 0x40 +#define ADV7511_REG_POWER2_HPD_SRC_CEC 0x80 +#define ADV7511_REG_POWER2_HPD_SRC_NONE 0xc0 #define ADV7511_REG_POWER2_TDMS_ENABLE BIT(4) #define ADV7511_REG_POWER2_GATE_INPUT_CLK BIT(0)