| Message ID | 1452635736-7343-1-git-send-email-stillcompiling@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tuesday, January 12, 2016 01:55:35 PM Joshua Clayton wrote: > Add simple-panel support for the Sharp LQ101K1LY04i, which is > a 10 inch WXGA (1280x800) lvds panel. > > Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> > --- > drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c > index f97b73e..e01eacb 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -1073,6 +1073,30 @@ static const struct panel_desc samsung_ltn140at29_301 = { > }, > }; > > +static const struct display_timing sharp_lq101k1ly04_timing = { > + .pixelclock = { 60000000, 65000000, 80000000 }, > + .hactive = { 1280, 1280, 1280 }, > + .hfront_porch = { 20, 20, 20 }, > + .hback_porch = { 20, 20, 20 }, > + .hsync_len = { 10, 10, 10 }, > + .vactive = { 800, 800, 800 }, > + .vfront_porch = { 4, 4, 4 }, > + .vback_porch = { 4, 4, 4 }, > + .vsync_len = { 4, 4, 4 }, > + .flags = DISPLAY_FLAGS_PIXDATA_POSEDGE, > +}; > + > +static const struct panel_desc sharp_lq101k1ly04 = { > + .timings = &sharp_lq101k1ly04_timing, > + .num_timings = 1, > + .bpc = 8, > + .size = { > + .width = 217, > + .height = 136, > + }, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > +}; > + > static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = { > .clock = 33300, > .hdisplay = 800, > @@ -1188,6 +1212,9 @@ static const struct of_device_id platform_of_match[] = { > .compatible = "samsung,ltn140at29-301", > .data = &samsung_ltn140at29_301, > }, { > + .compatible = "sharp,lq101k1ly04", > + .data = &sharp_lq101k1ly04, > + }, { > .compatible = "shelly,sca07010-bfn-lnn", > .data = &shelly_sca07010_bfn_lnn, > }, { Ping? This panel is needed for a system I am working to get upstreamed. I can confirm that the timings are in use several months and well tested.
On Tue, 12 Jan 2016 13:55:35 -0800 Joshua Clayton <stillcompiling@gmail.com> wrote: Ping? FYI The dts for the board using this panel is now in linux-next. Is there something more I need to do to get it queued? They are my first patches for the drm subsystem, so I may be unfamiliar with the customs. I just checked; the patches still apply cleanly against linux-next. > Add simple-panel support for the Sharp LQ101K1LY04i, which is > a 10 inch WXGA (1280x800) lvds panel. > > Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> > --- > drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/drivers/gpu/drm/panel/panel-simple.c > b/drivers/gpu/drm/panel/panel-simple.c index f97b73e..e01eacb 100644 > --- a/drivers/gpu/drm/panel/panel-simple.c > +++ b/drivers/gpu/drm/panel/panel-simple.c > @@ -1073,6 +1073,30 @@ static const struct panel_desc > samsung_ltn140at29_301 = { }, > }; > > +static const struct display_timing sharp_lq101k1ly04_timing = { > + .pixelclock = { 60000000, 65000000, 80000000 }, > + .hactive = { 1280, 1280, 1280 }, > + .hfront_porch = { 20, 20, 20 }, > + .hback_porch = { 20, 20, 20 }, > + .hsync_len = { 10, 10, 10 }, > + .vactive = { 800, 800, 800 }, > + .vfront_porch = { 4, 4, 4 }, > + .vback_porch = { 4, 4, 4 }, > + .vsync_len = { 4, 4, 4 }, > + .flags = DISPLAY_FLAGS_PIXDATA_POSEDGE, > +}; > + > +static const struct panel_desc sharp_lq101k1ly04 = { > + .timings = &sharp_lq101k1ly04_timing, > + .num_timings = 1, > + .bpc = 8, > + .size = { > + .width = 217, > + .height = 136, > + }, > + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, > +}; > + > static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = { > .clock = 33300, > .hdisplay = 800, > @@ -1188,6 +1212,9 @@ static const struct of_device_id > platform_of_match[] = { .compatible = "samsung,ltn140at29-301", > .data = &samsung_ltn140at29_301, > }, { > + .compatible = "sharp,lq101k1ly04", > + .data = &sharp_lq101k1ly04, > + }, { > .compatible = "shelly,sca07010-bfn-lnn", > .data = &shelly_sca07010_bfn_lnn, > }, {
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index f97b73e..e01eacb 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1073,6 +1073,30 @@ static const struct panel_desc samsung_ltn140at29_301 = { }, }; +static const struct display_timing sharp_lq101k1ly04_timing = { + .pixelclock = { 60000000, 65000000, 80000000 }, + .hactive = { 1280, 1280, 1280 }, + .hfront_porch = { 20, 20, 20 }, + .hback_porch = { 20, 20, 20 }, + .hsync_len = { 10, 10, 10 }, + .vactive = { 800, 800, 800 }, + .vfront_porch = { 4, 4, 4 }, + .vback_porch = { 4, 4, 4 }, + .vsync_len = { 4, 4, 4 }, + .flags = DISPLAY_FLAGS_PIXDATA_POSEDGE, +}; + +static const struct panel_desc sharp_lq101k1ly04 = { + .timings = &sharp_lq101k1ly04_timing, + .num_timings = 1, + .bpc = 8, + .size = { + .width = 217, + .height = 136, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, +}; + static const struct drm_display_mode shelly_sca07010_bfn_lnn_mode = { .clock = 33300, .hdisplay = 800, @@ -1188,6 +1212,9 @@ static const struct of_device_id platform_of_match[] = { .compatible = "samsung,ltn140at29-301", .data = &samsung_ltn140at29_301, }, { + .compatible = "sharp,lq101k1ly04", + .data = &sharp_lq101k1ly04, + }, { .compatible = "shelly,sca07010-bfn-lnn", .data = &shelly_sca07010_bfn_lnn, }, {
Add simple-panel support for the Sharp LQ101K1LY04i, which is a 10 inch WXGA (1280x800) lvds panel. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> --- drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)