| Message ID | 1452620173-4905-4-git-send-email-bharatku@xilinx.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Tuesday 12 January 2016 23:06:11 Bharat Kumar Gogada wrote: > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both > Zynq and Microblaze Architectures. > With these modifications drivers/pci/host/pcie-xilinx.c, will > work on both Zynq and Microblaze Architectures. > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> I think this patch should be split into three, as you are doing three unrelated things here. > --- > Changes: > Changed Total number of MSI IRQ count logic according to both architectures. > Updated MSI assigning functions accordingly to new count. > Modified irq_domain_add_linear with new MSI IRQ count. > Added #ifdef to pci_fixup_irqs which is ARM specific API. > --- > drivers/pci/host/pcie-xilinx.c | 22 +++++++++++++++++----- > 1 file changed, 17 insertions(+), 5 deletions(-) > > diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c > index 3e3757f..1981948 100644 > --- a/drivers/pci/host/pcie-xilinx.c > +++ b/drivers/pci/host/pcie-xilinx.c > @@ -92,7 +92,12 @@ > #define ECAM_DEV_NUM_SHIFT 12 > > /* Number of MSI IRQs */ > -#define XILINX_NUM_MSI_IRQS 128 > +#define XILINX_NUM_MSI_IRQS 128 > +#ifdef CONFIG_ARM > +#define TOT_NR_IRQS XILINX_NUM_MSI_IRQS > +#else > +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) > +#endif Something looks wrong here in the microblaze variant. What does NR_IRQS have to do with it? > @@ -238,15 +243,20 @@ static void xilinx_pcie_destroy_msi(unsigned int irq) > */ > static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) > { > + int irq; > int pos; > > pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); > - if (pos < XILINX_NUM_MSI_IRQS) > + irq = pos; > +#ifdef CONFIG_MICROBLAZE > + irq = XILINX_NUM_MSI_IRQS + pos; > +#endif if (IS_ENABLED(CONFIG_MICROBLAZE)) irq = XILINX_NUM_MSI_IRQS + pos; > @@ -705,7 +715,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev) > #endif > pci_scan_child_bus(bus); > pci_assign_unassigned_bus_resources(bus); > +#ifdef CONFIG_ARM > pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); > +#endif > pci_bus_add_devices(bus); > platform_set_drvdata(pdev, port); Here it looks like microblaze gets it right. I'm not sure why we still need the pci_fixup_irqs() on ARM, but my feeling is that this should be fixed in common code. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 12.1.2016 23:27, Arnd Bergmann wrote: > On Tuesday 12 January 2016 23:06:11 Bharat Kumar Gogada wrote: >> Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both >> Zynq and Microblaze Architectures. >> With these modifications drivers/pci/host/pcie-xilinx.c, will >> work on both Zynq and Microblaze Architectures. >> >> Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> >> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> > > I think this patch should be split into three, as you are doing three > unrelated things here. > >> --- >> Changes: >> Changed Total number of MSI IRQ count logic according to both architectures. >> Updated MSI assigning functions accordingly to new count. >> Modified irq_domain_add_linear with new MSI IRQ count. >> Added #ifdef to pci_fixup_irqs which is ARM specific API. >> --- >> drivers/pci/host/pcie-xilinx.c | 22 +++++++++++++++++----- >> 1 file changed, 17 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c >> index 3e3757f..1981948 100644 >> --- a/drivers/pci/host/pcie-xilinx.c >> +++ b/drivers/pci/host/pcie-xilinx.c >> @@ -92,7 +92,12 @@ >> #define ECAM_DEV_NUM_SHIFT 12 >> >> /* Number of MSI IRQs */ >> -#define XILINX_NUM_MSI_IRQS 128 >> +#define XILINX_NUM_MSI_IRQS 128 >> +#ifdef CONFIG_ARM >> +#define TOT_NR_IRQS XILINX_NUM_MSI_IRQS >> +#else >> +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) >> +#endif > > Something looks wrong here in the microblaze variant. What does NR_IRQS > have to do with it? Arnd: What was the story regarding NR_IRQS? I remember some discussion about it but just forget. Default value in include/asm-generic/irq.h is 64. Current value is 32 because microblaze primary interrupt controller is axi_intc core which has up to 32 input lines. Thanks, Michal -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tuesday 26 January 2016 10:59:12 Michal Simek wrote: > >> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c > >> index 3e3757f..1981948 100644 > >> --- a/drivers/pci/host/pcie-xilinx.c > >> +++ b/drivers/pci/host/pcie-xilinx.c > >> @@ -92,7 +92,12 @@ > >> #define ECAM_DEV_NUM_SHIFT 12 > >> > >> /* Number of MSI IRQs */ > >> -#define XILINX_NUM_MSI_IRQS 128 > >> +#define XILINX_NUM_MSI_IRQS 128 > >> +#ifdef CONFIG_ARM > >> +#define TOT_NR_IRQS XILINX_NUM_MSI_IRQS > >> +#else > >> +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) > >> +#endif > > > > Something looks wrong here in the microblaze variant. What does NR_IRQS > > have to do with it? > > Arnd: What was the story regarding NR_IRQS? > I remember some discussion about it but just forget. > > Default value in include/asm-generic/irq.h is 64. > Current value is 32 because microblaze primary interrupt controller is > axi_intc core which has up to 32 input lines. The value in asm-generic is completely arbitrary, it's just something that happens to work for a number of the simpler architectures. Traditionally, there is a a fixed NR_IRQS which defines the maximum number of interrupts that can be used, and each irqchip has a fixed start offset below that number. On modern systems, you have CONFIG_SPARSE_IRQ, which lets an irqchip allocate its own interrupts, without an upper limit. This is more flexible and avoids preallocating space for all irq_desc instances, so it saves memory. This code however doesn't do either of the two on microblaze: + irq = pos; +#ifdef CONFIG_MICROBLAZE +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) + irq = XILINX_NUM_MSI_IRQS + pos; +#endif + if (irq < TOT_NR_IRQS) set_bit(pos, msi_irq_in_use); So you define XILINX_NUM_MSI_IRQS to mean the number of interrupts that the xilinx_pcie_port can handle itself, but then pick a number outside of this range by making the hwirq number something between XILINX_NUM_MSI_IRQS and (2*XILINX_NUM_MSI_IRQS - 1), and in the end compare it to (NR_IRQS + XILINX_NUM_MSI_IRQS), which is the sum of two things that are not related: the total number of interrupts including the MSIs and the number of MSI. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 26.1.2016 13:11, Arnd Bergmann wrote: > On Tuesday 26 January 2016 10:59:12 Michal Simek wrote: >>>> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c >>>> index 3e3757f..1981948 100644 >>>> --- a/drivers/pci/host/pcie-xilinx.c >>>> +++ b/drivers/pci/host/pcie-xilinx.c >>>> @@ -92,7 +92,12 @@ >>>> #define ECAM_DEV_NUM_SHIFT 12 >>>> >>>> /* Number of MSI IRQs */ >>>> -#define XILINX_NUM_MSI_IRQS 128 >>>> +#define XILINX_NUM_MSI_IRQS 128 >>>> +#ifdef CONFIG_ARM >>>> +#define TOT_NR_IRQS XILINX_NUM_MSI_IRQS >>>> +#else >>>> +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) >>>> +#endif >>> >>> Something looks wrong here in the microblaze variant. What does NR_IRQS >>> have to do with it? >> >> Arnd: What was the story regarding NR_IRQS? >> I remember some discussion about it but just forget. >> >> Default value in include/asm-generic/irq.h is 64. >> Current value is 32 because microblaze primary interrupt controller is >> axi_intc core which has up to 32 input lines. > > The value in asm-generic is completely arbitrary, it's just something > that happens to work for a number of the simpler architectures. > > Traditionally, there is a a fixed NR_IRQS which defines the maximum > number of interrupts that can be used, and each irqchip has a fixed > start offset below that number. > > On modern systems, you have CONFIG_SPARSE_IRQ, which lets an irqchip > allocate its own interrupts, without an upper limit. This is more > flexible and avoids preallocating space for all irq_desc instances, > so it saves memory. ok. That was the story. I will look if there is any issue to enable SPARSE_IRQ for Microblaze. I also need to move intc driver out of arch. Thanks, Michal -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> Subject: Re: [PATCH V2 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver > to work on both Zynq and Microblaze > > On Tuesday 12 January 2016 23:06:11 Bharat Kumar Gogada wrote: > > Modifying Xilinx AXI PCIe Host Bridge Soft IP driver to work on both > > Zynq and Microblaze Architectures. > > With these modifications drivers/pci/host/pcie-xilinx.c, will work on > > both Zynq and Microblaze Architectures. > > > > Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> > > Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> > > I think this patch should be split into three, as you are doing three unrelated > things here. > Agreed, will send as different patches in next series. > > --- > > --- a/drivers/pci/host/pcie-xilinx.c > > +++ b/drivers/pci/host/pcie-xilinx.c > > @@ -92,7 +92,12 @@ > > #define ECAM_DEV_NUM_SHIFT 12 > > > > /* Number of MSI IRQs */ > > -#define XILINX_NUM_MSI_IRQS 128 > > +#define XILINX_NUM_MSI_IRQS 128 > > +#ifdef CONFIG_ARM > > +#define TOT_NR_IRQS XILINX_NUM_MSI_IRQS > > +#else > > +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) > > +#endif > > Something looks wrong here in the microblaze variant. What does NR_IRQS > have to do with it? > > > @@ -238,15 +243,20 @@ static void xilinx_pcie_destroy_msi(unsigned int > irq) > > */ > > static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) { > > + int irq; > > int pos; > > > > pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); > > - if (pos < XILINX_NUM_MSI_IRQS) > > + irq = pos; > > +#ifdef CONFIG_MICROBLAZE > > + irq = XILINX_NUM_MSI_IRQS + pos; > > +#endif > > > if (IS_ENABLED(CONFIG_MICROBLAZE)) > irq = XILINX_NUM_MSI_IRQS + pos; > Agreed. > > @@ -705,7 +715,9 @@ static int xilinx_pcie_probe(struct > > platform_device *pdev) #endif > > pci_scan_child_bus(bus); > > pci_assign_unassigned_bus_resources(bus); > > +#ifdef CONFIG_ARM > > pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); > > +#endif > > pci_bus_add_devices(bus); > > platform_set_drvdata(pdev, port); > > Here it looks like microblaze gets it right. I'm not sure why we still need the > pci_fixup_irqs() on ARM, but my feeling is that this should be fixed in > common code. In arm pci_fixup_irqs is called by pci_common_init_dev (arch/arm/kernel/bios32.c), since this API is removed now, I was calling it separately. Bharat -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> > On Tuesday 26 January 2016 10:59:12 Michal Simek wrote: > > >> diff --git a/drivers/pci/host/pcie-xilinx.c > > >> b/drivers/pci/host/pcie-xilinx.c index 3e3757f..1981948 100644 > > >> --- a/drivers/pci/host/pcie-xilinx.c > > >> +++ b/drivers/pci/host/pcie-xilinx.c > > >> @@ -92,7 +92,12 @@ > > >> #define ECAM_DEV_NUM_SHIFT 12 > > >> > > >> /* Number of MSI IRQs */ > > >> -#define XILINX_NUM_MSI_IRQS 128 > > >> +#define XILINX_NUM_MSI_IRQS 128 > > >> +#ifdef CONFIG_ARM > > >> +#define TOT_NR_IRQS XILINX_NUM_MSI_IRQS > > >> +#else > > >> +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) > > >> +#endif > > > > > > Something looks wrong here in the microblaze variant. What does > > > NR_IRQS have to do with it? > > > > Arnd: What was the story regarding NR_IRQS? > > I remember some discussion about it but just forget. > > > > Default value in include/asm-generic/irq.h is 64. > > Current value is 32 because microblaze primary interrupt controller is > > axi_intc core which has up to 32 input lines. > > The value in asm-generic is completely arbitrary, it's just something that > happens to work for a number of the simpler architectures. > > Traditionally, there is a a fixed NR_IRQS which defines the maximum number > of interrupts that can be used, and each irqchip has a fixed start offset below > that number. > > On modern systems, you have CONFIG_SPARSE_IRQ, which lets an irqchip > allocate its own interrupts, without an upper limit. This is more flexible and > avoids preallocating space for all irq_desc instances, so it saves memory. > > This code however doesn't do either of the two on microblaze: > > + irq = pos; > +#ifdef CONFIG_MICROBLAZE > +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) > + irq = XILINX_NUM_MSI_IRQS + pos; #endif > + if (irq < TOT_NR_IRQS) > set_bit(pos, msi_irq_in_use); > > So you define XILINX_NUM_MSI_IRQS to mean the number of interrupts > that the xilinx_pcie_port can handle itself, but then pick a number > outside of this range by making the hwirq number something between > XILINX_NUM_MSI_IRQS and (2*XILINX_NUM_MSI_IRQS - 1), and in the > end compare it to (NR_IRQS + XILINX_NUM_MSI_IRQS), which is the > sum of two things that are not related: the total number of interrupts > including the MSIs and the number of MSI. > Agreed, I have crosschecked something's which I missed previously, NR_IRQS have nothing to do with the count, and also no need to add, irq = XILINX_NUM_MSI_IRQS + pos; in microblaze, I will remove these checks in next patch series. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wednesday 27 January 2016 14:33:45 Bharat Kumar Gogada wrote: > > > @@ -705,7 +715,9 @@ static int xilinx_pcie_probe(struct > > > platform_device *pdev) #endif > > > pci_scan_child_bus(bus); > > > pci_assign_unassigned_bus_resources(bus); > > > +#ifdef CONFIG_ARM > > > pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); > > > +#endif > > > pci_bus_add_devices(bus); > > > platform_set_drvdata(pdev, port); > > > > Here it looks like microblaze gets it right. I'm not sure why we still need the > > pci_fixup_irqs() on ARM, but my feeling is that this should be fixed in > > common code. > In arm pci_fixup_irqs is called by pci_common_init_dev (arch/arm/kernel/bios32.c), since this API is removed now, I was calling it separately. But who calls it in microblaze? If it works without the extra call there, can we make it work the same way for ARM? Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> Subject: Re: [PATCH V2 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver > to work on both Zynq and Microblaze > > On Wednesday 27 January 2016 14:33:45 Bharat Kumar Gogada wrote: > > > > @@ -705,7 +715,9 @@ static int xilinx_pcie_probe(struct > > > > platform_device *pdev) #endif > > > > pci_scan_child_bus(bus); > > > > pci_assign_unassigned_bus_resources(bus); > > > > +#ifdef CONFIG_ARM > > > > pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); > > > > +#endif > > > > pci_bus_add_devices(bus); > > > > platform_set_drvdata(pdev, port); > > > > > > Here it looks like microblaze gets it right. I'm not sure why we > > > still need the > > > pci_fixup_irqs() on ARM, but my feeling is that this should be fixed > > > in common code. > > In arm pci_fixup_irqs is called by pci_common_init_dev > (arch/arm/kernel/bios32.c), since this API is removed now, I was calling it > separately. > > But who calls it in microblaze? If it works without the extra call there, can we > make it work the same way for ARM? > In microblaze I have added pcibios_add_device call (similar to call in arch/arm64/kernel/pci.c ) in pci-common.c, which is being invoked by kernel core itself. May be we can add similar on arm and test out, but we might need some cleanup in arch/arm/kernel/bios32.c Bharat -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 28 January 2016 13:20:56 Bharat Kumar Gogada wrote: > > Subject: Re: [PATCH V2 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver > > to work on both Zynq and Microblaze > > > > On Wednesday 27 January 2016 14:33:45 Bharat Kumar Gogada wrote: > > > > > @@ -705,7 +715,9 @@ static int xilinx_pcie_probe(struct > > > > > platform_device *pdev) #endif > > > > > pci_scan_child_bus(bus); > > > > > pci_assign_unassigned_bus_resources(bus); > > > > > +#ifdef CONFIG_ARM > > > > > pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); > > > > > +#endif > > > > > pci_bus_add_devices(bus); > > > > > platform_set_drvdata(pdev, port); > > > > > > > > Here it looks like microblaze gets it right. I'm not sure why we > > > > still need the > > > > pci_fixup_irqs() on ARM, but my feeling is that this should be fixed > > > > in common code. > > > In arm pci_fixup_irqs is called by pci_common_init_dev > > (arch/arm/kernel/bios32.c), since this API is removed now, I was calling it > > separately. > > > > But who calls it in microblaze? If it works without the extra call there, can we > > make it work the same way for ARM? > > > In microblaze I have added pcibios_add_device call (similar to call in > arch/arm64/kernel/pci.c ) in pci-common.c, which is being invoked by > kernel core itself. I see. In the upstream code you seem to do it in pcibios_setup_bus_devices(), while arm64 and powerpc do it in pcibios_add_device(). > May be we can add similar on arm and test out, but > we might need some cleanup in arch/arm/kernel/bios32.c I think that would still just be a half-baked solution. This should really be fully automatic. We could do it in the __weak pcibios_add_device() for all architectures that don't override it when the bus was probed from DT, or we could do it in pci_read_irq(). Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
> Subject: Re: [PATCH V2 3/5] PCI: xilinx: Modifying AXI PCIe Host Bridge driver > to work on both Zynq and Microblaze > > On Thursday 28 January 2016 13:20:56 Bharat Kumar Gogada wrote: > > > Subject: Re: [PATCH V2 3/5] PCI: xilinx: Modifying AXI PCIe Host > > > Bridge driver to work on both Zynq and Microblaze > > > > > > On Wednesday 27 January 2016 14:33:45 Bharat Kumar Gogada wrote: > > > > > > @@ -705,7 +715,9 @@ static int xilinx_pcie_probe(struct > > > > > > platform_device *pdev) #endif > > > > > > pci_scan_child_bus(bus); > > > > > > pci_assign_unassigned_bus_resources(bus); > > > > > > +#ifdef CONFIG_ARM > > > > > > pci_fixup_irqs(pci_common_swizzle, > > > > > > of_irq_parse_and_map_pci); > > > > > > +#endif > > > > > > pci_bus_add_devices(bus); > > > > > > platform_set_drvdata(pdev, port); > > > > > > > > > > Here it looks like microblaze gets it right. I'm not sure why we > > > > > still need the > > > > > pci_fixup_irqs() on ARM, but my feeling is that this should be > > > > > fixed in common code. > > > > In arm pci_fixup_irqs is called by pci_common_init_dev > > > (arch/arm/kernel/bios32.c), since this API is removed now, I was > > > calling it separately. > > > > > > But who calls it in microblaze? If it works without the extra call > > > there, can we make it work the same way for ARM? > > > > > In microblaze I have added pcibios_add_device call (similar to call in > > arch/arm64/kernel/pci.c ) in pci-common.c, which is being invoked by > > kernel core itself. > > I see. In the upstream code you seem to do it in > pcibios_setup_bus_devices(), while arm64 and powerpc do it in > pcibios_add_device(). > No that function is not getting called with generic API's, its getting called with pcibios_init flow which is tightly bound with struct pci_controller microblaze specific structure. So I added pcibios_add_device in pci-common.c. > > May be we can add similar on arm and test out, but we might need some > > cleanup in arch/arm/kernel/bios32.c > > I think that would still just be a half-baked solution. This should really be fully > automatic. We could do it in the __weak > pcibios_add_device() for all architectures that don't override it when the bus > was probed from DT, or we could do it in pci_read_irq(). When will pci_read_irq() call get invoked ? Bharat -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 28 January 2016 14:18:15 Bharat Kumar Gogada wrote: > > > > I see. In the upstream code you seem to do it in > > pcibios_setup_bus_devices(), while arm64 and powerpc do it in > > pcibios_add_device(). > > > No that function is not getting called with generic API's, its getting called with pcibios_init flow which is tightly bound with struct pci_controller microblaze specific structure. So I added pcibios_add_device in pci-common.c. Ok > > > May be we can add similar on arm and test out, but we might need some > > > cleanup in arch/arm/kernel/bios32.c > > > > I think that would still just be a half-baked solution. This should really be fully > > automatic. We could do it in the __weak > > pcibios_add_device() for all architectures that don't override it when the bus > > was probed from DT, or we could do it in pci_read_irq(). > When will pci_read_irq() call get invoked ? This is called early on when a device gets created in pci_setup_device(), so platforms can still override the value later. The idea here is that normally a BIOS stores the interrupt number in the PCI_INTERRUPT_LINE config space byte, and we just read it from there. Generally speaking though, for non-PC systems we tend to not have a BIOS that writes these values to start with, and any values stored in here have no meaning in combination with SPARSE_IRQ and/or IRQ_DOMAINS because the bootloader or BIOS doesn't know what IRQ number will refer to hardware IRQ line in Linux. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jan 28, 2016 at 03:23:37PM +0100, Arnd Bergmann wrote: > On Thursday 28 January 2016 14:18:15 Bharat Kumar Gogada wrote: > > > > > > I see. In the upstream code you seem to do it in > > > pcibios_setup_bus_devices(), while arm64 and powerpc do it in > > > pcibios_add_device(). > > > > > No that function is not getting called with generic API's, its getting called with pcibios_init flow which is tightly bound with struct pci_controller microblaze specific structure. So I added pcibios_add_device in pci-common.c. > > Ok > > > > > May be we can add similar on arm and test out, but we might need some > > > > cleanup in arch/arm/kernel/bios32.c > > > > > > I think that would still just be a half-baked solution. This should really be fully > > > automatic. We could do it in the __weak > > > pcibios_add_device() for all architectures that don't override it when the bus > > > was probed from DT, or we could do it in pci_read_irq(). > > When will pci_read_irq() call get invoked ? > > This is called early on when a device gets created in pci_setup_device(), > so platforms can still override the value later. > > The idea here is that normally a BIOS stores the interrupt number in > the PCI_INTERRUPT_LINE config space byte, and we just read it from > there. Generally speaking though, for non-PC systems we tend to not > have a BIOS that writes these values to start with, and any values > stored in here have no meaning in combination with SPARSE_IRQ > and/or IRQ_DOMAINS because the bootloader or BIOS doesn't know > what IRQ number will refer to hardware IRQ line in Linux. I think the best way to handle this is through Matthew's series (below), in the interim a callback in arch code would do, we will clean it up when Matthew's series goes upstream, it should not take too long. http://www.spinics.net/lists/linux-pci/msg45950.html Thanks, Lorenzo -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c index 3e3757f..1981948 100644 --- a/drivers/pci/host/pcie-xilinx.c +++ b/drivers/pci/host/pcie-xilinx.c @@ -92,7 +92,12 @@ #define ECAM_DEV_NUM_SHIFT 12 /* Number of MSI IRQs */ -#define XILINX_NUM_MSI_IRQS 128 +#define XILINX_NUM_MSI_IRQS 128 +#ifdef CONFIG_ARM +#define TOT_NR_IRQS XILINX_NUM_MSI_IRQS +#else +#define TOT_NR_IRQS (NR_IRQS + XILINX_NUM_MSI_IRQS) +#endif /** @@ -238,15 +243,20 @@ static void xilinx_pcie_destroy_msi(unsigned int irq) */ static int xilinx_pcie_assign_msi(struct xilinx_pcie_port *port) { + int irq; int pos; pos = find_first_zero_bit(msi_irq_in_use, XILINX_NUM_MSI_IRQS); - if (pos < XILINX_NUM_MSI_IRQS) + irq = pos; +#ifdef CONFIG_MICROBLAZE + irq = XILINX_NUM_MSI_IRQS + pos; +#endif + if (irq < TOT_NR_IRQS) set_bit(pos, msi_irq_in_use); else return -ENOSPC; - return pos; + return irq; } /** @@ -520,7 +530,7 @@ static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port) free_pages(port->msi_pages, 0); - num_irqs = XILINX_NUM_MSI_IRQS; + num_irqs = TOT_NR_IRQS; } else { /* INTx */ num_irqs = 4; @@ -565,7 +575,7 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port) /* Setup MSI */ if (IS_ENABLED(CONFIG_PCI_MSI)) { port->irq_domain = irq_domain_add_linear(node, - XILINX_NUM_MSI_IRQS, + TOT_NR_IRQS, &msi_domain_ops, &xilinx_pcie_msi_chip); if (!port->irq_domain) { @@ -705,7 +715,9 @@ static int xilinx_pcie_probe(struct platform_device *pdev) #endif pci_scan_child_bus(bus); pci_assign_unassigned_bus_resources(bus); +#ifdef CONFIG_ARM pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci); +#endif pci_bus_add_devices(bus); platform_set_drvdata(pdev, port);