diff mbox

vfio: pci: fix oops in case of vfio_msi_set_vector_signal failure

Message ID 1454103676.9301.3.camel@redhat.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alex Williamson Jan. 29, 2016, 9:41 p.m. UTC
On Fri, 2016-01-29 at 14:43 +0000, Eric Auger wrote:
> In case vfio_msi_set_vector_signal fails we tear down everything.
> In the tear down loop we compare int j against unsigned start. Given
> the arithmetic conversion I think it is converted into an unsigned and
> becomes 0xffffffff, leading to the loop being entered again and things
> turn bad when accessing vdev->msix[vector].vector. So let's use int
> parameters instead.

> Signed-off-by: Eric Auger <eric.auger@linaro.org>
> ---
>  drivers/vfio/pci/vfio_pci_intrs.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> index 3b3ba15..510c48d 100644
> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> @@ -374,8 +374,8 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
>  	return 0;
>  }
>  
> -static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
> -			      unsigned count, int32_t *fds, bool msix)
> +static int vfio_msi_set_block(struct vfio_pci_device *vdev, int start,
> +			      int count, int32_t *fds, bool msix)
>  {
>  	int i, j, ret = 0;
>  

Nice find, I don't think that's the only bug there though.  If @start is
-1 (UINT32_MAX) and @count is 1, then @j gets set to -1 in the setup and
we hit the same index dereference problem.  What if we did this instead:


So we fix the problem with vfio_msi_set_vector_signal() dereferencing
the array before it validates the index (even though it shouldn't be
able to get there anymore), and then we do a better job of verifying
start and count (comparing to num_ctx will use unsigned even though
num_ctx itself is signed) and finally explicitly test the <0 case, which
I suppose we could also do by casting start at that point (we know it's
within the bounds of a signed integer given the previous tests).
Thanks,

Alex

Comments

Eric Auger Feb. 1, 2016, 5:27 p.m. UTC | #1
Hi Alex,
On 01/29/2016 10:41 PM, Alex Williamson wrote:
> On Fri, 2016-01-29 at 14:43 +0000, Eric Auger wrote:
>> In case vfio_msi_set_vector_signal fails we tear down everything.
>> In the tear down loop we compare int j against unsigned start. Given
>> the arithmetic conversion I think it is converted into an unsigned and
>> becomes 0xffffffff, leading to the loop being entered again and things
>> turn bad when accessing vdev->msix[vector].vector. So let's use int
>> parameters instead.
>>  
>> Signed-off-by: Eric Auger <eric.auger@linaro.org>
>> ---
>>  drivers/vfio/pci/vfio_pci_intrs.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>  
>> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
>> index 3b3ba15..510c48d 100644
>> --- a/drivers/vfio/pci/vfio_pci_intrs.c
>> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
>> @@ -374,8 +374,8 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
>>  	return 0;
>>  }
>>  
>> -static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
>> -			      unsigned count, int32_t *fds, bool msix)
>> +static int vfio_msi_set_block(struct vfio_pci_device *vdev, int start,
>> +			      int count, int32_t *fds, bool msix)
>>  {
>>  	int i, j, ret = 0;
>>  
> 
> Nice find, I don't think that's the only bug there though.  If @start is
> -1 (UINT32_MAX) and @count is 1, then @j gets set to -1 in the setup and
> we hit the same index dereference problem.  What if we did this instead:
> 
> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> index 3b3ba15..2ae84ad 100644
> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> @@ -309,14 +309,14 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
>  				      int vector, int fd, bool msix)
>  {
>  	struct pci_dev *pdev = vdev->pdev;
> -	int irq = msix ? vdev->msix[vector].vector : pdev->irq + vector;
> -	char *name = msix ? "vfio-msix" : "vfio-msi";
>  	struct eventfd_ctx *trigger;
> -	int ret;
> +	int irq, ret;
>  
> -	if (vector >= vdev->num_ctx)
> +	if (vector < 0 || vector >= vdev->num_ctx)
>  		return -EINVAL;
>  
> +	irq = msix ? vdev->msix[vector].vector : pdev->irq + vector;
> +
>  	if (vdev->ctx[vector].trigger) {
>  		free_irq(irq, vdev->ctx[vector].trigger);
>  		irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
> @@ -328,8 +328,9 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
>  	if (fd < 0)
>  		return 0;
>  
> -	vdev->ctx[vector].name = kasprintf(GFP_KERNEL, "%s[%d](%s)",
> -					   name, vector, pci_name(pdev));
> +	vdev->ctx[vector].name = kasprintf(GFP_KERNEL, "vfio-msi%s[%d](%s)",
> +					   msix ? "x" : "", vector,
> +					   pci_name(pdev));
>  	if (!vdev->ctx[vector].name)
>  		return -ENOMEM;
>  
> @@ -379,7 +380,7 @@ static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
>  {
>  	int i, j, ret = 0;
>  
> -	if (start + count > vdev->num_ctx)
> +	if (start >= vdev->num_ctx || start + count > vdev->num_ctx)
>  		return -EINVAL;
>  
>  	for (i = 0, j = start; i < count && !ret; i++, j++) {
> @@ -388,7 +389,7 @@ static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
>  	}
>  
>  	if (ret) {
> -		for (--j; j >= start; j--)
> +		for (--j; j >= 0 && j >= start; j--)
>  			vfio_msi_set_vector_signal(vdev, j, -1, msix);
>  	}
>  
> 
> So we fix the problem with vfio_msi_set_vector_signal() dereferencing
> the array before it validates the index (even though it shouldn't be
> able to get there anymore), and then we do a better job of verifying
> start and count (comparing to num_ctx will use unsigned even though
> num_ctx itself is signed) and finally explicitly test the <0 case, which
> I suppose we could also do by casting start at that point (we know it's
> within the bounds of a signed integer given the previous tests).

Yes it looks OK to me.

I guess you submit? I will test it.

Best Regards

Eric
> Thanks,
> 
> Alex
>
Alex Williamson Feb. 1, 2016, 9:34 p.m. UTC | #2
On Mon, 2016-02-01 at 18:27 +0100, Eric Auger wrote:
> Hi Alex,
> On 01/29/2016 10:41 PM, Alex Williamson wrote:
> > On Fri, 2016-01-29 at 14:43 +0000, Eric Auger wrote:
> > > In case vfio_msi_set_vector_signal fails we tear down everything.
> > > In the tear down loop we compare int j against unsigned start. Given
> > > the arithmetic conversion I think it is converted into an unsigned and
> > > becomes 0xffffffff, leading to the loop being entered again and things
> > > turn bad when accessing vdev->msix[vector].vector. So let's use int
> > > parameters instead.
> > >  
> > > Signed-off-by: Eric Auger <eric.auger@linaro.org>
> > > ---
> > >  drivers/vfio/pci/vfio_pci_intrs.c | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > >  
> > > diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> > > index 3b3ba15..510c48d 100644
> > > --- a/drivers/vfio/pci/vfio_pci_intrs.c
> > > +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> > > @@ -374,8 +374,8 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
> > >  	return 0;
> > >  }
> > >  
> > > -static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
> > > -			      unsigned count, int32_t *fds, bool msix)
> > > +static int vfio_msi_set_block(struct vfio_pci_device *vdev, int start,
> > > +			      int count, int32_t *fds, bool msix)
> > >  {
> > >  	int i, j, ret = 0;
> > >  
> > 
> > Nice find, I don't think that's the only bug there though.  If @start is
> > -1 (UINT32_MAX) and @count is 1, then @j gets set to -1 in the setup and
> > we hit the same index dereference problem.  What if we did this instead:
> > 
> > diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> > index 3b3ba15..2ae84ad 100644
> > --- a/drivers/vfio/pci/vfio_pci_intrs.c
> > +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> > @@ -309,14 +309,14 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
> >  				      int vector, int fd, bool msix)
> >  {
> >  	struct pci_dev *pdev = vdev->pdev;
> > -	int irq = msix ? vdev->msix[vector].vector : pdev->irq + vector;
> > -	char *name = msix ? "vfio-msix" : "vfio-msi";
> >  	struct eventfd_ctx *trigger;
> > -	int ret;
> > +	int irq, ret;
> >  
> > -	if (vector >= vdev->num_ctx)
> > +	if (vector < 0 || vector >= vdev->num_ctx)
> >  		return -EINVAL;
> >  
> > +	irq = msix ? vdev->msix[vector].vector : pdev->irq + vector;
> > +
> >  	if (vdev->ctx[vector].trigger) {
> >  		free_irq(irq, vdev->ctx[vector].trigger);
> >  		irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
> > @@ -328,8 +328,9 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
> >  	if (fd < 0)
> >  		return 0;
> >  
> > -	vdev->ctx[vector].name = kasprintf(GFP_KERNEL, "%s[%d](%s)",
> > -					   name, vector, pci_name(pdev));
> > +	vdev->ctx[vector].name = kasprintf(GFP_KERNEL, "vfio-msi%s[%d](%s)",
> > +					   msix ? "x" : "", vector,
> > +					   pci_name(pdev));
> >  	if (!vdev->ctx[vector].name)
> >  		return -ENOMEM;
> >  
> > @@ -379,7 +380,7 @@ static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
> >  {
> >  	int i, j, ret = 0;
> >  
> > -	if (start + count > vdev->num_ctx)
> > +	if (start >= vdev->num_ctx || start + count > vdev->num_ctx)
> >  		return -EINVAL;
> >  
> >  	for (i = 0, j = start; i < count && !ret; i++, j++) {
> > @@ -388,7 +389,7 @@ static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
> >  	}
> >  
> >  	if (ret) {
> > -		for (--j; j >= start; j--)
> > +		for (--j; j >= 0 && j >= start; j--)
> >  			vfio_msi_set_vector_signal(vdev, j, -1, msix);
> >  	}
> >  
> > 
> > So we fix the problem with vfio_msi_set_vector_signal() dereferencing
> > the array before it validates the index (even though it shouldn't be
> > able to get there anymore), and then we do a better job of verifying
> > start and count (comparing to num_ctx will use unsigned even though
> > num_ctx itself is signed) and finally explicitly test the <0 case, which
> > I suppose we could also do by casting start at that point (we know it's
> > within the bounds of a signed integer given the previous tests).

> Yes it looks OK to me.

> I guess you submit? I will test it.

Yep, I'll post a real patch.  Thanks,

Alex
diff mbox

Patch

diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index 3b3ba15..2ae84ad 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -309,14 +309,14 @@  static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
 				      int vector, int fd, bool msix)
 {
 	struct pci_dev *pdev = vdev->pdev;
-	int irq = msix ? vdev->msix[vector].vector : pdev->irq + vector;
-	char *name = msix ? "vfio-msix" : "vfio-msi";
 	struct eventfd_ctx *trigger;
-	int ret;
+	int irq, ret;
 
-	if (vector >= vdev->num_ctx)
+	if (vector < 0 || vector >= vdev->num_ctx)
 		return -EINVAL;
 
+	irq = msix ? vdev->msix[vector].vector : pdev->irq + vector;
+
 	if (vdev->ctx[vector].trigger) {
 		free_irq(irq, vdev->ctx[vector].trigger);
 		irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
@@ -328,8 +328,9 @@  static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
 	if (fd < 0)
 		return 0;
 
-	vdev->ctx[vector].name = kasprintf(GFP_KERNEL, "%s[%d](%s)",
-					   name, vector, pci_name(pdev));
+	vdev->ctx[vector].name = kasprintf(GFP_KERNEL, "vfio-msi%s[%d](%s)",
+					   msix ? "x" : "", vector,
+					   pci_name(pdev));
 	if (!vdev->ctx[vector].name)
 		return -ENOMEM;
 
@@ -379,7 +380,7 @@  static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
 {
 	int i, j, ret = 0;
 
-	if (start + count > vdev->num_ctx)
+	if (start >= vdev->num_ctx || start + count > vdev->num_ctx)
 		return -EINVAL;
 
 	for (i = 0, j = start; i < count && !ret; i++, j++) {
@@ -388,7 +389,7 @@  static int vfio_msi_set_block(struct vfio_pci_device *vdev, unsigned start,
 	}
 
 	if (ret) {
-		for (--j; j >= start; j--)
+		for (--j; j >= 0 && j >= start; j--)
 			vfio_msi_set_vector_signal(vdev, j, -1, msix);
 	}