| Message ID | 1453294626-17608-4-git-send-email-LW@KARO-electronics.de (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
On Wed, Jan 20, 2016 at 01:57:03PM +0100, Lothar Waßmann wrote: > ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro > TX6 modules. Specify this clock in DTB to let it be managed correctly > by the driver. > > Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Applied, thanks. -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 9404668..5e0afc8 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -227,6 +227,11 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>, + <&clks IMX6QDL_CLK_ENET_REF>; + clock-names = "ipg", "ahb", "ptp", "enet_out"; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; phy-supply = <®_3v3_etn>;
ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro TX6 modules. Specify this clock in DTB to let it be managed correctly by the driver. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 5 +++++ 1 file changed, 5 insertions(+)