| Message ID | 1455847186-4423-1-git-send-email-jay.xu@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Feb 19, 2016 at 09:59:46AM +0800, jianqun.xu wrote: > From: Xing Zheng <zhengxing@rock-chips.com> > > Add the devicetree binding for the cru on the rk3399 which quite > similar structured as previous clock controllers. > > Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> > Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> > --- > changes in v4: > - none > changes in v3: > - none > changes in v2: > - none > > .../bindings/clock/rockchip,rk3399-cru.txt | 82 ++++++++++++++++++++++ > 1 file changed, 82 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt Acked-by: Rob Herring <robh@kernel.org> > > diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt > new file mode 100644 > index 0000000..07bcc6e > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt > @@ -0,0 +1,82 @@ > +* Rockchip RK3399 Clock and Reset Unit > + > +The RK3399 clock controller generates and supplies clock to various > +controllers within the SoC and also implements a reset controller for SoC > +peripherals. > + > +Required Properties: > + > +- compatible: PMU for CRU should be "rockchip,rk3399-pmucru" > +- compatible: CRU should be "rockchip,rk3399-cru" > +- reg: physical base address of the controller and length of memory mapped > + region. > +- #clock-cells: should be 1. > +- #reset-cells: should be 1. > + > +Optional Properties: > + > +- rockchip,grf: phandle to the syscon managing the "general register files" > + If missing, pll rates are not changeable, due to the missing pll lock status. > + > +Each clock is assigned an identifier and client nodes can use this identifier > +to specify the clock which they consume. All available clocks are defined as > +preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be > +used in device tree sources. Similar macros exist for the reset sources in > +these files. > + > +External clocks: > + > +There are several clocks that are generated outside the SoC. It is expected > +that they are defined using standard clock bindings with following > +clock-output-names: > + - "xin24m" - crystal input - required, > + - "xin32k" - rtc clock - optional, > + - "ext_i2s" - external I2S clock - optional, > + - "ext_gmac" - external GMAC clock - optional > + - "ext_hsadc" - external HSADC clock - optional, > + - "ext_isp" - external ISP clock - optional, > + - "ext_jtag" - external JTAG clock - optional > + - "ext_vip" - external VIP clock - optional, > + - "usbotg_out" - output clock of the pll in the otg phy > + > +Example: General Register Files > + > + pmugrf: syscon@ff320000 { > + compatible = "rockchip,rk3399-pmugrf", "syscon"; > + reg = <0x0 0xff320000 0x0 0x1000>; > + }; > + > + grf: syscon@ff770000 { > + compatible = "rockchip,rk3399-grf", "syscon"; > + reg = <0x0 0xff770000 0x0 0x10000>; > + }; > + > +Example: Clock controller node: > + > + pmucru: pmu-clock-controller@ff750000 { > + compatible = "rockchip,rk3399-pmucru"; > + reg = <0x0 0xff750000 0x0 0x1000>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > + cru: clock-controller@ff760000 { > + compatible = "rockchip,rk3399-cru"; > + reg = <0x0 0xff760000 0x0 0x1000>; > + rockchip,grf = <&grf>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + }; > + > +Example: UART controller node that consumes the clock generated by the clock > + controller: > + > + uart0: serial@ff1a0000 { > + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; > + reg = <0x0 0xff180000 0x0 0x100>; > + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; > + clock-names = "baudclk", "apb_pclk"; > + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; > + reg-shift = <2>; > + reg-io-width = <4>; > + }; > -- > 1.9.1 > >
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt new file mode 100644 index 0000000..07bcc6e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt @@ -0,0 +1,82 @@ +* Rockchip RK3399 Clock and Reset Unit + +The RK3399 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: PMU for CRU should be "rockchip,rk3399-pmucru" +- compatible: CRU should be "rockchip,rk3399-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing, pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "xin32k" - rtc clock - optional, + - "ext_i2s" - external I2S clock - optional, + - "ext_gmac" - external GMAC clock - optional + - "ext_hsadc" - external HSADC clock - optional, + - "ext_isp" - external ISP clock - optional, + - "ext_jtag" - external JTAG clock - optional + - "ext_vip" - external VIP clock - optional, + - "usbotg_out" - output clock of the pll in the otg phy + +Example: General Register Files + + pmugrf: syscon@ff320000 { + compatible = "rockchip,rk3399-pmugrf", "syscon"; + reg = <0x0 0xff320000 0x0 0x1000>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon"; + reg = <0x0 0xff770000 0x0 0x10000>; + }; + +Example: Clock controller node: + + pmucru: pmu-clock-controller@ff750000 { + compatible = "rockchip,rk3399-pmucru"; + reg = <0x0 0xff750000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3399-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff1a0000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff180000 0x0 0x100>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + };