| Message ID | 1456308664-28308-1-git-send-email-lokeshvutla@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Lokesh Vutla <lokeshvutla@ti.com> [160224 02:14]: > DRA7 SoC has the capability to support DDR memory upto 4GB. In order to > represent this in memory dt node, the address-cells and size cells > should be 2. So, changing the address-cells and size-cells to 2 and > updating the memory nodes accordingly. > @@ -57,10 +57,10 @@ > compatible = "arm,cortex-a15-gic"; > interrupt-controller; > #interrupt-cells = <3>; > - reg = <0x48211000 0x1000>, > - <0x48212000 0x1000>, > - <0x48214000 0x2000>, > - <0x48216000 0x2000>; > + reg = <0x0 0x48211000 0x0 0x1000>, > + <0x0 0x48212000 0x0 0x1000>, > + <0x0 0x48214000 0x0 0x2000>, > + <0x0 0x48216000 0x0 0x2000>; > interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; > interrupt-parent = <&gic>; > }; > @@ -69,7 +69,7 @@ > compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; > interrupt-controller; > #interrupt-cells = <3>; > - reg = <0x48281000 0x1000>; > + reg = <0x0 0x48281000 0x0 0x1000>; > interrupt-parent = <&gic>; > }; > > @@ -96,10 +96,10 @@ > compatible = "ti,dra7-l3-noc", "simple-bus"; > #address-cells = <1>; > #size-cells = <1>; > - ranges; > + ranges = <0x0 0x0 0x0 0xc0000000>; > ti,hwmods = "l3_main_1", "l3_main_2"; > - reg = <0x44000000 0x1000000>, > - <0x45000000 0x1000>; > + reg = <0x0 0x44000000 0x0 0x1000000>, > + <0x0 0x45000000 0x0 0x1000>; > interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, > <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > Is size-cells 2 needed for all these devices too? Can't you just set it for the memory nodes? Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Tony, On Saturday 27 February 2016 12:41 AM, Tony Lindgren wrote: > * Lokesh Vutla <lokeshvutla@ti.com> [160224 02:14]: >> DRA7 SoC has the capability to support DDR memory upto 4GB. In order to >> represent this in memory dt node, the address-cells and size cells >> should be 2. So, changing the address-cells and size-cells to 2 and >> updating the memory nodes accordingly. >> @@ -57,10 +57,10 @@ >> compatible = "arm,cortex-a15-gic"; >> interrupt-controller; >> #interrupt-cells = <3>; >> - reg = <0x48211000 0x1000>, >> - <0x48212000 0x1000>, >> - <0x48214000 0x2000>, >> - <0x48216000 0x2000>; >> + reg = <0x0 0x48211000 0x0 0x1000>, >> + <0x0 0x48212000 0x0 0x1000>, >> + <0x0 0x48214000 0x0 0x2000>, >> + <0x0 0x48216000 0x0 0x2000>; >> interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; >> interrupt-parent = <&gic>; >> }; >> @@ -69,7 +69,7 @@ >> compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; >> interrupt-controller; >> #interrupt-cells = <3>; >> - reg = <0x48281000 0x1000>; >> + reg = <0x0 0x48281000 0x0 0x1000>; >> interrupt-parent = <&gic>; >> }; >> >> @@ -96,10 +96,10 @@ >> compatible = "ti,dra7-l3-noc", "simple-bus"; >> #address-cells = <1>; >> #size-cells = <1>; >> - ranges; >> + ranges = <0x0 0x0 0x0 0xc0000000>; >> ti,hwmods = "l3_main_1", "l3_main_2"; >> - reg = <0x44000000 0x1000000>, >> - <0x45000000 0x1000>; >> + reg = <0x0 0x44000000 0x0 0x1000000>, >> + <0x0 0x45000000 0x0 0x1000>; >> interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, >> <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; >> > > Is size-cells 2 needed for all these devices too? Can't > you just set it for the memory nodes? For updating memory nodes with 64bit, I have to change the address and size cells as 2 for the root node. So, reg property in all the children to the root node should also be updated with 2 address cells and 2 size cells or else the below warning shows up: Warning (reg_format): "reg" property in /interrupt-controller@48281000 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 2) Warning (ranges_format): /ocp has empty "ranges" property but its #address-cells (1) differs from / (2) Warning (ranges_format): /ocp has empty "ranges" property but its #size-cells (1) differs from / (2) This is why I am updating all the children to the root node. Thanks and regards, Lokesh -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Lokesh Vutla <a0131933@ti.com> [160229 00:48]: > On Saturday 27 February 2016 12:41 AM, Tony Lindgren wrote: > > * Lokesh Vutla <lokeshvutla@ti.com> [160224 02:14]: > > > > Is size-cells 2 needed for all these devices too? Can't > > you just set it for the memory nodes? > > For updating memory nodes with 64bit, I have to change the address and > size cells as 2 for the root node. So, reg property in all the children > to the root node should also be updated with 2 address cells and 2 size > cells or else the below warning shows up: Yes I understand that if we need to set it at the top level. But what happens if you only set it for the memory node? With just something like: memory { #address-cells = <2>; #size-cells = <2>; ... }; Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday 29 February 2016 10:16:07 Tony Lindgren wrote: > Yes I understand that if we need to set it at the top level. But what > happens if you only set it for the memory node? > > With just something like: > > memory { > #address-cells = <2>; > #size-cells = <2>; > ... > }; Nothing happens there: the memory node has no children, and no ranges property, so the two properties are never referenced. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Arnd Bergmann <arnd@arndb.de> [160229 12:46]: > On Monday 29 February 2016 10:16:07 Tony Lindgren wrote: > > Yes I understand that if we need to set it at the top level. But what > > happens if you only set it for the memory node? > > > > With just something like: > > > > memory { > > #address-cells = <2>; > > #size-cells = <2>; > > ... > > }; > > Nothing happens there: the memory node has no children, and no > ranges property, so the two properties are never referenced. OK thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Lokesh Vutla <lokeshvutla@ti.com> [160224 02:14]: > DRA7 SoC has the capability to support DDR memory upto 4GB. In order to > represent this in memory dt node, the address-cells and size cells > should be 2. So, changing the address-cells and size-cells to 2 and > updating the memory nodes accordingly. Applying into omap-for-v4.6/dt thanks. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 50312f8..9b664c5 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -24,7 +24,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x80000000>; + reg = <0x0 0x80000000 0x0 0x80000000>; }; vdd_3v3: fixedregulator-vdd_3v3 { diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index c538826..e6c40db 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -21,7 +21,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */ + reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ }; leds { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index cfc24e5..2d1d3dd 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -18,7 +18,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x60000000>; /* 1536 MB */ + reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */ }; evm_3v3_sd: fixedregulator-sd { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 8ea153a..5460a2a 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -15,8 +15,8 @@ #define MAX_SOURCES 400 / { - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; compatible = "ti,dra7xx"; interrupt-parent = <&crossbar_mpu>; @@ -57,10 +57,10 @@ compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48211000 0x1000>, - <0x48212000 0x1000>, - <0x48214000 0x2000>, - <0x48216000 0x2000>; + reg = <0x0 0x48211000 0x0 0x1000>, + <0x0 0x48212000 0x0 0x1000>, + <0x0 0x48214000 0x0 0x2000>, + <0x0 0x48216000 0x0 0x2000>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; interrupt-parent = <&gic>; }; @@ -69,7 +69,7 @@ compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu"; interrupt-controller; #interrupt-cells = <3>; - reg = <0x48281000 0x1000>; + reg = <0x0 0x48281000 0x0 0x1000>; interrupt-parent = <&gic>; }; @@ -96,10 +96,10 @@ compatible = "ti,dra7-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x0 0x0 0x0 0xc0000000>; ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x44000000 0x1000000>, - <0x45000000 0x1000>; + reg = <0x0 0x44000000 0x0 0x1000000>, + <0x0 0x45000000 0x0 0x1000>; interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 00b1200..6a5b0c8 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -17,7 +17,7 @@ memory { device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1024 MB */ + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */ }; aliases {
DRA7 SoC has the capability to support DDR memory upto 4GB. In order to represent this in memory dt node, the address-cells and size cells should be 2. So, changing the address-cells and size-cells to 2 and updating the memory nodes accordingly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +- arch/arm/boot/dts/dra7-evm.dts | 2 +- arch/arm/boot/dts/dra7.dtsi | 20 ++++++++++---------- arch/arm/boot/dts/dra72-evm.dts | 2 +- 5 files changed, 14 insertions(+), 14 deletions(-)