diff mbox

PCI: Support SRIOV on Legacy EndPoint device

Message ID 1455041338-3644-1-git-send-email-kelly.zytaruk@amd.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Kelly Zytaruk Feb. 9, 2016, 6:08 p.m. UTC
From: Kelly Zytaruk <kelly.zytaruk@amd.com>

It is not neccessary to check for PCI_EXP_TYPE in sriov_init().  There appears to be no reason for the check.

Some AMD GPUs have hardware support for grapics SRIOV.
If the GPU has a display output then the GPU needs to support Legacy VGA operation.
If CLASS_CODE = VGA then the device should have a Port Type = Legacy EndPoint.
Therefore in order to enable SRIOV on a GPU with a display output, LEGACY_END_POINT is supported as a valid Port Type by removing the check for Port Type.

Patch is also logged in Bugzilla #112221

Signed-off-by: Kelly Zytaruk <kelly.zytaruk@amd.com>
---
 drivers/pci/iov.c |    4 ----
 1 file changed, 4 deletions(-)

Comments

Bjorn Helgaas Feb. 29, 2016, 6 p.m. UTC | #1
On Tue, Feb 09, 2016 at 01:08:58PM -0500, kelly.zytaruk@amd.com wrote:
> From: Kelly Zytaruk <kelly.zytaruk@amd.com>
> 
> It is not neccessary to check for PCI_EXP_TYPE in sriov_init().  There appears to be no reason for the check.
> 
> Some AMD GPUs have hardware support for grapics SRIOV.
> If the GPU has a display output then the GPU needs to support Legacy VGA operation.
> If CLASS_CODE = VGA then the device should have a Port Type = Legacy EndPoint.
> Therefore in order to enable SRIOV on a GPU with a display output, LEGACY_END_POINT is supported as a valid Port Type by removing the check for Port Type.
> 
> Patch is also logged in Bugzilla #112221
> 
> Signed-off-by: Kelly Zytaruk <kelly.zytaruk@amd.com>

Applied to pci/virtualization for v4.6, with changelog as follows:

    PCI: Support SR-IOV on any function type
    
    Previously, we only supported SR-IOV on PCI Express Endpoints and Root
    Complex Integrated Endpoints.  This restriction has been present since
    d1b054da8f59 ("PCI: initialize and release SR-IOV capability") added SR-IOV
    support, but the spec does not require it.  In fact, the SR-IOV spec r1.1,
    sec 3.3, says the SR-IOV extended capability may be present for any Type 0
    function.
    
    Remove the function type test, so we can support SR-IOV on any function.
    
    Some AMD GPUs have display outputs, use the VGA class code, are Legacy
    Endpoints, and support SR-IOV.  This change allows Linux to enable SR-IOV
    on these devices.
    
    [bhelgaas: changelog]
    Link: https://bugzilla.kernel.org/show_bug.cgi?id=112221
    Signed-off-by: Kelly Zytaruk <kelly.zytaruk@amd.com>
    Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

> ---
>  drivers/pci/iov.c |    4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
> index 31f31d4..fe4bd0a 100644
> --- a/drivers/pci/iov.c
> +++ b/drivers/pci/iov.c
> @@ -387,10 +387,6 @@ static int sriov_init(struct pci_dev *dev, int pos)
>  	struct resource *res;
>  	struct pci_dev *pdev;
>  
> -	if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_END &&
> -	    pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT)
> -		return -ENODEV;
> -
>  	pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl);
>  	if (ctrl & PCI_SRIOV_CTRL_VFE) {
>  		pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0);
> -- 
> 1.7.10.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 31f31d4..fe4bd0a 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -387,10 +387,6 @@  static int sriov_init(struct pci_dev *dev, int pos)
 	struct resource *res;
 	struct pci_dev *pdev;
 
-	if (pci_pcie_type(dev) != PCI_EXP_TYPE_RC_END &&
-	    pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT)
-		return -ENODEV;
-
 	pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl);
 	if (ctrl & PCI_SRIOV_CTRL_VFE) {
 		pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0);