| Message ID | 1456883754-24305-1-git-send-email-horms+renesas@verge.net.au (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Simon, On Wed, Mar 2, 2016 at 2:55 AM, Simon Horman <horms+renesas@verge.net.au> wrote: > [PATCH] Remove ARCH_SHMOBILE Please use a more appropriate one-line summary. > Since the removal of legacy (non-multiplatform) support this driver has not > been used by any Renesas ARM based SoCs. > > This is part of an ongoing process to migrate from ARCH_SHMOBILE to > ARCH_RENESAS the motivation for which being that RENESAS seems to be a more > appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > --- > drivers/input/keyboard/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > Based on v4.5-rc1 > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index ddd8148d51d7..984532c6e689 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -560,7 +560,7 @@ config KEYBOARD_SUNKBD > > config KEYBOARD_SH_KEYSC > tristate "SuperH KEYSC keypad support" > - depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST > + depends on SUPERH || COMPILE_TEST I think dropping the SUPERH dependency is the right approach here, as all SuperH platforms using the driver select ARCH_SHMOBILE. "sh_keysc" is used on SH_MIGOR, SH_ECOVEC, SH_KFR2R09, SH_7722_SOLUTION_ENGINE, and SH_7724_SOLUTION_ENGINE, which depend on either CPU_SUBTYPE_SH7722 or CPU_SUBTYPE_SH7724, and both select ARCH_SHMOBILE. > help > Say Y here if you want to use a keypad attached to the KEYSC block > on SuperH processors such as sh7722 and sh7343. FWIW, this has never been enabled on sh7343. But CPU_SUBTYPE_SH7343 also selects ARCH_SHMOBILE, so we're safe. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
I think you forgot a proper prefix in the subject... -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 2, 2016 at 6:30 PM, Geert Uytterhoeven <geert@linux-m68k.org> wrote: > On Wed, Mar 2, 2016 at 2:55 AM, Simon Horman <horms+renesas@verge.net.au> wrote: >> [PATCH] Remove ARCH_SHMOBILE > > Please use a more appropriate one-line summary. > >> Since the removal of legacy (non-multiplatform) support this driver has not >> been used by any Renesas ARM based SoCs. >> >> This is part of an ongoing process to migrate from ARCH_SHMOBILE to >> ARCH_RENESAS the motivation for which being that RENESAS seems to be a more >> appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. >> >> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> >> --- >> drivers/input/keyboard/Kconfig | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> Based on v4.5-rc1 >> >> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig >> index ddd8148d51d7..984532c6e689 100644 >> --- a/drivers/input/keyboard/Kconfig >> +++ b/drivers/input/keyboard/Kconfig >> @@ -560,7 +560,7 @@ config KEYBOARD_SUNKBD >> >> config KEYBOARD_SH_KEYSC >> tristate "SuperH KEYSC keypad support" >> - depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST >> + depends on SUPERH || COMPILE_TEST > > I think dropping the SUPERH dependency is the right approach here, as all > SuperH platforms using the driver select ARCH_SHMOBILE. Thanks, I agree! > "sh_keysc" is used on SH_MIGOR, SH_ECOVEC, SH_KFR2R09, SH_7722_SOLUTION_ENGINE, > and SH_7724_SOLUTION_ENGINE, which depend on either CPU_SUBTYPE_SH7722 or > CPU_SUBTYPE_SH7724, and both select ARCH_SHMOBILE. > >> help >> Say Y here if you want to use a keypad attached to the KEYSC block >> on SuperH processors such as sh7722 and sh7343. > > FWIW, this has never been enabled on sh7343. But CPU_SUBTYPE_SH7343 also > selects ARCH_SHMOBILE, so we're safe. You are right that the SH architecture is the main consumer at this point. I do however vaguely recall ARM shmobile G3EVM and G4EVM including sh7367 and some other SoC also having a KEYSC hardware block included. Due to the iffy interrupt controller upstream support for those boards/socs were killed off quite some time ago while (not) migrating to DT. So I think this KEYSC driver is simply a left over from that time. Cheers, / magnus -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Magnus, On Wed, Mar 2, 2016 at 5:00 PM, Magnus Damm <magnus.damm@gmail.com> wrote: > On Wed, Mar 2, 2016 at 6:30 PM, Geert Uytterhoeven <geert@linux-m68k.org> wrote: >> On Wed, Mar 2, 2016 at 2:55 AM, Simon Horman <horms+renesas@verge.net.au> wrote: >>> --- a/drivers/input/keyboard/Kconfig >>> +++ b/drivers/input/keyboard/Kconfig >>> @@ -560,7 +560,7 @@ config KEYBOARD_SUNKBD >>> >>> config KEYBOARD_SH_KEYSC >>> tristate "SuperH KEYSC keypad support" >>> - depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST >>> + depends on SUPERH || COMPILE_TEST >> >> I think dropping the SUPERH dependency is the right approach here, as all >> SuperH platforms using the driver select ARCH_SHMOBILE. > > Thanks, I agree! > >> "sh_keysc" is used on SH_MIGOR, SH_ECOVEC, SH_KFR2R09, SH_7722_SOLUTION_ENGINE, >> and SH_7724_SOLUTION_ENGINE, which depend on either CPU_SUBTYPE_SH7722 or >> CPU_SUBTYPE_SH7724, and both select ARCH_SHMOBILE. >> >>> help >>> Say Y here if you want to use a keypad attached to the KEYSC block >>> on SuperH processors such as sh7722 and sh7343. >> >> FWIW, this has never been enabled on sh7343. But CPU_SUBTYPE_SH7343 also >> selects ARCH_SHMOBILE, so we're safe. > > You are right that the SH architecture is the main consumer at this > point. I do however vaguely recall ARM shmobile G3EVM and G4EVM > including sh7367 and some other SoC also having a KEYSC hardware block > included. Due to the iffy interrupt controller upstream support for > those boards/socs were killed off quite some time ago while (not) > migrating to DT. So I think this KEYSC driver is simply a left over > from that time. Note that sh73a0 also has keysc, but I don't think it's usable on kzm9g (after a quick look at the schematics). Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 02, 2016 at 04:18:48PM +0300, Sergei Shtylyov wrote:
> I think you forgot a proper prefix in the subject...
Indeed, sorry about that.
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index ddd8148d51d7..984532c6e689 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -560,7 +560,7 @@ config KEYBOARD_SUNKBD config KEYBOARD_SH_KEYSC tristate "SuperH KEYSC keypad support" - depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST + depends on SUPERH || COMPILE_TEST help Say Y here if you want to use a keypad attached to the KEYSC block on SuperH processors such as sh7722 and sh7343.
Since the removal of legacy (non-multiplatform) support this driver has not been used by any Renesas ARM based SoCs. This is part of an ongoing process to migrate from ARCH_SHMOBILE to ARCH_RENESAS the motivation for which being that RENESAS seems to be a more appropriate name than SHMOBILE for the majority of Renesas ARM based SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- drivers/input/keyboard/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) Based on v4.5-rc1