diff mbox

[v2,8/9] ARM: shmobile: lager dts: Add entries for VIN HDMI input support

Message ID 1456938997-29971-9-git-send-email-ulrich.hecht+renesas@gmail.com (mailing list archive)
State Deferred
Delegated to: Simon Horman
Headers show

Commit Message

Ulrich Hecht March 2, 2016, 5:16 p.m. UTC 
From: William Towle <william.towle@codethink.co.uk>

Add DT entries for vin0, vin0_pins, and adv7612.

Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
[uli: added interrupt, renamed endpoint]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 40 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

Comments

Sergei Shtylyov March 2, 2016, 7:04 p.m. UTC | #1 
The new way of writing the subject prefix is "ARM: dts: lager: ..."
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index aa6ca92..a5f727c 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -414,7 +414,12 @@ 
 		renesas,function = "usb2";
 	};
 
-	vin1_pins: vin {
+	vin0_pins: vin0 {
+		renesas,groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		renesas,function = "vin0";
+	};
+
+	vin1_pins: vin1 {
 		renesas,groups = "vin1_data8", "vin1_clk";
 		renesas,function = "vin1";
 	};
@@ -590,6 +595,20 @@ 
 		reg = <0x12>;
 	};
 
+	hdmi-in@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		remote = <&vin0>;
+
+		port {
+			adv7612: endpoint {
+				remote-endpoint = <&vin0ep0>;
+			};
+		};
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -705,6 +724,25 @@ 
 	status = "okay";
 };
 
+/* HDMI video input */
+&vin0 {
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	status = "ok";
+
+	port {
+		vin0ep0: endpoint {
+			remote-endpoint = <&adv7612>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
 /* composite video input */
 &vin1 {
 	pinctrl-0 = <&vin1_pins>;