| Message ID | 1456556396-4759-2-git-send-email-raveendra.padasalagi@broadcom.com (mailing list archive) |
|---|---|
| State | Under Review |
| Headers | show |
On Sat, Feb 27, 2016 at 12:29:54PM +0530, Raveendra Padasalagi wrote: > In Cygnus SOC touch screen controller registers are shared > with ADC and flex timer. Using readl/writel could lead to > race condition. So touch screen driver is enhanced to support > register access using syscon framework API's to take care of > mutually exclusive access.In addition to this existing touchscreen > node name "tsc" is renamed to "touchscreen". > > Hence touchscreen dt node bindings document is updated to take care > of above changes in the touchscreen driver. > > Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> > Reviewed-by: Ray Jui <ray.jui@broadcom.com> > Reviewed-by: Scott Branden <scott.branden@broadcom.com> > --- > .../input/touchscreen/brcm,iproc-touchscreen.txt | 21 ++++++++++++++++----- > 1 file changed, 16 insertions(+), 5 deletions(-) Acked-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt index 34e3382..25541f3 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt @@ -2,11 +2,17 @@ Required properties: - compatible: must be "brcm,iproc-touchscreen" -- reg: physical base address of the controller and length of memory mapped - region. +- ts_syscon: handler of syscon node defining physical base + address of the controller and length of memory mapped region. + If this property is selected please make sure MFD_SYSCON config + is enabled in the defconfig file. - clocks: The clock provided by the SOC to driver the tsc - clock-name: name for the clock - interrupts: The touchscreen controller's interrupt +- address-cells: Specify the number of u32 entries needed in child nodes. + Should set to 1. +- size-cells: Specify number of u32 entries needed to specify child nodes size + in reg property. Should set to 1. Optional properties: - scanning_period: Time between scans. Each step is 1024 us. Valid 1-256. @@ -53,13 +59,18 @@ Optional properties: - touchscreen-inverted-x: X axis is inverted (boolean) - touchscreen-inverted-y: Y axis is inverted (boolean) -Example: +Example: An example of touchscreen node - touchscreen: tsc@0x180A6000 { + ts_adc_syscon: ts_adc_syscon@180a6000 { + compatible = "brcm,iproc-ts-adc-syscon","syscon"; + reg = <0x180a6000 0xc30>; + }; + + touchscreen: touchscreen@180A6000 { compatible = "brcm,iproc-touchscreen"; #address-cells = <1>; #size-cells = <1>; - reg = <0x180A6000 0x40>; + ts_syscon = <&ts_adc_syscon>; clocks = <&adc_clk>; clock-names = "tsc_clk"; interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;