| Message ID | 1457265358-31635-16-git-send-email-ygardi@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
Reviewed-by: Gilad Broner <gbroner@codeaurora.org> > Some UFS devices (and may be host) have issues if LCC is > enabled. So we are setting PA_Local_TX_LCC_Enable to 0 > before link startup which will make sure that both host > and device TX LCC are disabled once link startup is > completed. > > Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> > > --- > drivers/scsi/ufs/ufs-qcom.c | 27 ++++++++++++++++++++------- > drivers/scsi/ufs/unipro.h | 1 + > 2 files changed, 21 insertions(+), 7 deletions(-) > > diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c > index ed57729..966bacf 100644 > --- a/drivers/scsi/ufs/ufs-qcom.c > +++ b/drivers/scsi/ufs/ufs-qcom.c > @@ -16,8 +16,8 @@ > #include <linux/of.h> > #include <linux/platform_device.h> > #include <linux/phy/phy.h> > - > #include <linux/phy/phy-qcom-ufs.h> > + > #include "ufshcd.h" > #include "ufshcd-pltfrm.h" > #include "unipro.h" > @@ -106,9 +106,11 @@ static void ufs_qcom_disable_lane_clks(struct > ufs_qcom_host *host) > if (!host->is_lane_clks_enabled) > return; > > - clk_disable_unprepare(host->tx_l1_sync_clk); > + if (host->hba->lanes_per_direction > 1) > + clk_disable_unprepare(host->tx_l1_sync_clk); > clk_disable_unprepare(host->tx_l0_sync_clk); > - clk_disable_unprepare(host->rx_l1_sync_clk); > + if (host->hba->lanes_per_direction > 1) > + clk_disable_unprepare(host->rx_l1_sync_clk); > clk_disable_unprepare(host->rx_l0_sync_clk); > > host->is_lane_clks_enabled = false; > @@ -272,9 +274,8 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba > *hba) > ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B); > > if (ret) { > - dev_err(hba->dev, > - "%s: ufs_qcom_phy_calibrate_phy()failed, ret = %d\n", > - __func__, ret); > + dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = > %d\n", > + __func__, ret); > goto out; > } > > @@ -524,6 +525,18 @@ static int ufs_qcom_link_startup_notify(struct > ufs_hba *hba, > err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, > 150); > > + /* > + * Some UFS devices (and may be host) have issues if LCC is > + * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 > + * before link startup which will make sure that both host > + * and device TX LCC are disabled once link startup is > + * completed. > + */ > + if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) > + err = ufshcd_dme_set(hba, > + UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), > + 0); > + > break; > case POST_CHANGE: > ufs_qcom_link_startup_post_change(hba); > @@ -1542,7 +1555,7 @@ static int ufs_qcom_probe(struct platform_device > *pdev) > * ufs_qcom_remove - set driver_data of the device to NULL > * @pdev: pointer to platform device handle > * > - * Always return 0 > + * Always returns 0 > */ > static int ufs_qcom_remove(struct platform_device *pdev) > { > diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h > index 8082020..e2854e4 100644 > --- a/drivers/scsi/ufs/unipro.h > +++ b/drivers/scsi/ufs/unipro.h > @@ -75,6 +75,7 @@ > #define PA_MAXRXSPEEDFAST 0x1541 > #define PA_MAXRXSPEEDSLOW 0x1542 > #define PA_TXLINKSTARTUPHS 0x1544 > +#define PA_LOCAL_TX_LCC_ENABLE 0x155E > #define PA_TXSPEEDFAST 0x1565 > #define PA_TXSPEEDSLOW 0x1566 > #define PA_REMOTEVERINFO 0x15A0 > -- > 1.8.5.2 > > -- > QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c index ed57729..966bacf 100644 --- a/drivers/scsi/ufs/ufs-qcom.c +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -16,8 +16,8 @@ #include <linux/of.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> - #include <linux/phy/phy-qcom-ufs.h> + #include "ufshcd.h" #include "ufshcd-pltfrm.h" #include "unipro.h" @@ -106,9 +106,11 @@ static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) if (!host->is_lane_clks_enabled) return; - clk_disable_unprepare(host->tx_l1_sync_clk); + if (host->hba->lanes_per_direction > 1) + clk_disable_unprepare(host->tx_l1_sync_clk); clk_disable_unprepare(host->tx_l0_sync_clk); - clk_disable_unprepare(host->rx_l1_sync_clk); + if (host->hba->lanes_per_direction > 1) + clk_disable_unprepare(host->rx_l1_sync_clk); clk_disable_unprepare(host->rx_l0_sync_clk); host->is_lane_clks_enabled = false; @@ -272,9 +274,8 @@ static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B); if (ret) { - dev_err(hba->dev, - "%s: ufs_qcom_phy_calibrate_phy()failed, ret = %d\n", - __func__, ret); + dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n", + __func__, ret); goto out; } @@ -524,6 +525,18 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150); + /* + * Some UFS devices (and may be host) have issues if LCC is + * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 + * before link startup which will make sure that both host + * and device TX LCC are disabled once link startup is + * completed. + */ + if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) + err = ufshcd_dme_set(hba, + UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), + 0); + break; case POST_CHANGE: ufs_qcom_link_startup_post_change(hba); @@ -1542,7 +1555,7 @@ static int ufs_qcom_probe(struct platform_device *pdev) * ufs_qcom_remove - set driver_data of the device to NULL * @pdev: pointer to platform device handle * - * Always return 0 + * Always returns 0 */ static int ufs_qcom_remove(struct platform_device *pdev) { diff --git a/drivers/scsi/ufs/unipro.h b/drivers/scsi/ufs/unipro.h index 8082020..e2854e4 100644 --- a/drivers/scsi/ufs/unipro.h +++ b/drivers/scsi/ufs/unipro.h @@ -75,6 +75,7 @@ #define PA_MAXRXSPEEDFAST 0x1541 #define PA_MAXRXSPEEDSLOW 0x1542 #define PA_TXLINKSTARTUPHS 0x1544 +#define PA_LOCAL_TX_LCC_ENABLE 0x155E #define PA_TXSPEEDFAST 0x1565 #define PA_TXSPEEDSLOW 0x1566 #define PA_REMOTEVERINFO 0x15A0
Some UFS devices (and may be host) have issues if LCC is enabled. So we are setting PA_Local_TX_LCC_Enable to 0 before link startup which will make sure that both host and device TX LCC are disabled once link startup is completed. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> --- drivers/scsi/ufs/ufs-qcom.c | 27 ++++++++++++++++++++------- drivers/scsi/ufs/unipro.h | 1 + 2 files changed, 21 insertions(+), 7 deletions(-)