| Message ID | 1306322212-26879-1-git-send-email-javier.martin@vista-silicon.com (mailing list archive) |
|---|---|
| State | RFC |
| Headers | show |
Op 25 mei 2011, om 13:16 heeft Javier Martin het volgende geschreven: > It includes several fixes pointed out by Laurent Pinchart. However, > the BUG which shows artifacts in the image (horizontal lines) still > persists. It won't happen if 1v8 regulator is not disabled (i.e. > comment line where it is disabled in function "mt9p031_power_off"). > I know there can be some other details to fix but I would like someone > could help in the power management issue. I tried this + your beagle patch on 2.6.39 and both ISP and sensor being builtin to the kernel, I get the following: root@beagleboardxMC:~# media-ctl -r -l '"mt9p031 2-0048":0->"OMAP3 ISP CCDC":0[1 ], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' Resetting all links to inactive Setting up link 16:0 -> 5:0 [1] Setting up link 5:1 -> 6:0 [1] root@beagleboardxMC:~# media-ctl -f '"mt9p031 2-0048":0[SGRBG12 320x240], "OMAP3 ISP CCDC":0[SGRBG8 320x240], "OMAP3 ISP CCDC":1[SGRBG8 320x240]' Setting up format SGRBG12 320x240 on pad mt9p031 2-0048/0 Format set: SGRBG12 320x240 Setting up format SGRBG12 320x240 on pad OMAP3 ISP CCDC/0 Format set: SGRBG12 320x240 Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/0 Format set: SGRBG8 320x240 Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/1 Format set: SGRBG8 320x240 oot@beagleboardxMC:~# yavta -f SGRBG8 -s 320x240 -n 4 --capture=10 --skip 3 -F `media-ctl -e "OMAP3 ISP CCDC output"` Device /dev/video2 opened. Device `OMAP3 ISP CCDC output' on `media' is a video capture device. Video format set: SGRBG8 (47425247) 320x240 buffer size 76800 Video format: SGRBG8 (47425247) 320x240 buffer size 76800 4 buffers requested. length: 76800 offset: 0 Buffer 0 mapped at address 0x4030d000. length: 76800 offset: 77824 Buffer 1 mapped at address 0x40330000. length: 76800 offset: 155648 Buffer 2 mapped at address 0x4042d000. length: 76800 offset: 233472 Buffer 3 mapped at address 0x40502000. [ 4131.459930] omap3isp omap3isp: CCDC won't become idle! [..] ^C[ 4134.919464] omap3isp omap3isp: CCDC won't become idle! [ 4135.926116] omap3isp omap3isp: Unable to stop OMAP3 ISP CCDC Do I need some extra ISP patches? Media-ctl -p output is listed below. regards, Koen root@beagleboardxMC:~# media-ctl -p Opening media device /dev/media0 Enumerating entities Found 16 entities Enumerating pads and links Device topology - entity 1: OMAP3 ISP CCP2 (2 pads, 2 links) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev0 pad0: Input [SGRBG10 4096x4096] <- 'OMAP3 ISP CCP2 input':pad0 [] pad1: Output [SGRBG10 4096x4096] -> 'OMAP3 ISP CCDC':pad0 [] - entity 2: OMAP3 ISP CCP2 input (1 pad, 1 link) type Node subtype V4L device node name /dev/video0 pad0: Output -> 'OMAP3 ISP CCP2':pad0 [] - entity 3: OMAP3 ISP CSI2a (2 pads, 2 links) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev1 pad0: Input [SGRBG10 4096x4096] pad1: Output [SGRBG10 4096x4096] -> 'OMAP3 ISP CSI2a output':pad0 [] -> 'OMAP3 ISP CCDC':pad0 [] - entity 4: OMAP3 ISP CSI2a output (1 pad, 1 link) type Node subtype V4L device node name /dev/video1 pad0: Input <- 'OMAP3 ISP CSI2a':pad1 [] - entity 5: OMAP3 ISP CCDC (3 pads, 9 links) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev2 pad0: Input [SGRBG8 320x240] <- 'OMAP3 ISP CCP2':pad1 [] <- 'OMAP3 ISP CSI2a':pad1 [] <- 'mt9p031 2-0048':pad0 [ACTIVE] pad1: Output [SGRBG8 320x240] -> 'OMAP3 ISP CCDC output':pad0 [ACTIVE] -> 'OMAP3 ISP resizer':pad0 [] pad2: Output [SGRBG8 320x239] -> 'OMAP3 ISP preview':pad0 [] -> 'OMAP3 ISP AEWB':pad0 [IMMUTABLE,ACTIVE] -> 'OMAP3 ISP AF':pad0 [IMMUTABLE,ACTIVE] -> 'OMAP3 ISP histogram':pad0 [IMMUTABLE,ACTIVE] - entity 6: OMAP3 ISP CCDC output (1 pad, 1 link) type Node subtype V4L device node name /dev/video2 pad0: Input <- 'OMAP3 ISP CCDC':pad1 [ACTIVE] - entity 7: OMAP3 ISP preview (2 pads, 4 links) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev3 pad0: Input [SGRBG10 4096x4096] <- 'OMAP3 ISP CCDC':pad2 [] <- 'OMAP3 ISP preview input':pad0 [] pad1: Output [YUYV 4082x4088] -> 'OMAP3 ISP preview output':pad0 [] -> 'OMAP3 ISP resizer':pad0 [] - entity 8: OMAP3 ISP preview input (1 pad, 1 link) type Node subtype V4L device node name /dev/video3 pad0: Output -> 'OMAP3 ISP preview':pad0 [] - entity 9: OMAP3 ISP preview output (1 pad, 1 link) type Node subtype V4L device node name /dev/video4 pad0: Input <- 'OMAP3 ISP preview':pad1 [] - entity 10: OMAP3 ISP resizer (2 pads, 4 links) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev4 pad0: Input [YUYV 4095x4095 (4,6)/4086x4082] <- 'OMAP3 ISP CCDC':pad1 [] <- 'OMAP3 ISP preview':pad1 [] <- 'OMAP3 ISP resizer input':pad0 [] pad1: Output [YUYV 4096x4095] -> 'OMAP3 ISP resizer output':pad0 [] - entity 11: OMAP3 ISP resizer input (1 pad, 1 link) type Node subtype V4L device node name /dev/video5 pad0: Output -> 'OMAP3 ISP resizer':pad0 [] - entity 12: OMAP3 ISP resizer output (1 pad, 1 link) type Node subtype V4L device node name /dev/video6 pad0: Input <- 'OMAP3 ISP resizer':pad1 [] - entity 13: OMAP3 ISP AEWB (1 pad, 1 link) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev5 pad0: Input <- 'OMAP3 ISP CCDC':pad2 [IMMUTABLE,ACTIVE] - entity 14: OMAP3 ISP AF (1 pad, 1 link) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev6 pad0: Input <- 'OMAP3 ISP CCDC':pad2 [IMMUTABLE,ACTIVE] - entity 15: OMAP3 ISP histogram (1 pad, 1 link) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev7 pad0: Input <- 'OMAP3 ISP CCDC':pad2 [IMMUTABLE,ACTIVE] - entity 16: mt9p031 2-0048 (1 pad, 1 link) type V4L2 subdev subtype Unknown device node name /dev/v4l-subdev8 pad0: Output [SGRBG12 2592x1944 (16,54)/2592x1944] -> 'OMAP3 ISP CCDC':pad0 [ACTIVE] root@beagleboardxMC:~# -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Koen, On 25 May 2011 15:38, Koen Kooi <koen@beagleboard.org> wrote: > > Op 25 mei 2011, om 13:16 heeft Javier Martin het volgende geschreven: > >> It includes several fixes pointed out by Laurent Pinchart. However, >> the BUG which shows artifacts in the image (horizontal lines) still >> persists. It won't happen if 1v8 regulator is not disabled (i.e. >> comment line where it is disabled in function "mt9p031_power_off"). >> I know there can be some other details to fix but I would like someone >> could help in the power management issue. > > I tried this + your beagle patch on 2.6.39 and both ISP and sensor being builtin to the kernel, I get the following: > > root@beagleboardxMC:~# media-ctl -r -l '"mt9p031 2-0048":0->"OMAP3 ISP CCDC":0[1 ], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' > Resetting all links to inactive > Setting up link 16:0 -> 5:0 [1] > Setting up link 5:1 -> 6:0 [1] > > root@beagleboardxMC:~# media-ctl -f '"mt9p031 2-0048":0[SGRBG12 320x240], "OMAP3 ISP CCDC":0[SGRBG8 320x240], "OMAP3 ISP CCDC":1[SGRBG8 320x240]' > Setting up format SGRBG12 320x240 on pad mt9p031 2-0048/0 > Format set: SGRBG12 320x240 > Setting up format SGRBG12 320x240 on pad OMAP3 ISP CCDC/0 > Format set: SGRBG12 320x240 > Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/0 > Format set: SGRBG8 320x240 > Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/1 > Format set: SGRBG8 320x240 > > oot@beagleboardxMC:~# yavta -f SGRBG8 -s 320x240 -n 4 --capture=10 --skip 3 -F `media-ctl -e "OMAP3 ISP CCDC output"` > Device /dev/video2 opened. > Device `OMAP3 ISP CCDC output' on `media' is a video capture device. > Video format set: SGRBG8 (47425247) 320x240 buffer size 76800 > Video format: SGRBG8 (47425247) 320x240 buffer size 76800 > 4 buffers requested. > length: 76800 offset: 0 > Buffer 0 mapped at address 0x4030d000. > length: 76800 offset: 77824 > Buffer 1 mapped at address 0x40330000. > length: 76800 offset: 155648 > Buffer 2 mapped at address 0x4042d000. > length: 76800 offset: 233472 > Buffer 3 mapped at address 0x40502000. > [ 4131.459930] omap3isp omap3isp: CCDC won't become idle! Please, test it again using new RFC v3 I've just submitted. I have personally tested it against kernel 2.6.39 with the following .config file: # # Automatically generated make config: don't edit # Linux/arm 2.6.39-rc6 Kernel Configuration # Thu May 5 11:44:15 2011 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_HAVE_SCHED_CLOCK=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_USES_GETTIMEOFFSET is not set CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_KTIME_SCALAR=y CONFIG_HAVE_PROC_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_VECTORS_BASE=0xffff0000 # CONFIG_ARM_PATCH_PHYS_VIRT is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y CONFIG_HAVE_IRQ_WORK=y CONFIG_IRQ_WORK=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_FHANDLE is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SPARSE_IRQ=y CONFIG_GENERIC_IRQ_SHOW=y # CONFIG_SPARSE_IRQ is not set # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 # CONFIG_CGROUPS is not set # CONFIG_NAMESPACES is not set # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set # CONFIG_RD_XZ is not set # CONFIG_RD_LZO is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EXPERT=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set CONFIG_INLINE_SPIN_UNLOCK=y # CONFIG_INLINE_SPIN_UNLOCK_BH is not set CONFIG_INLINE_SPIN_UNLOCK_IRQ=y # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set CONFIG_INLINE_READ_UNLOCK=y # CONFIG_INLINE_READ_UNLOCK_BH is not set CONFIG_INLINE_READ_UNLOCK_IRQ=y # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set CONFIG_INLINE_WRITE_UNLOCK=y # CONFIG_INLINE_WRITE_UNLOCK_BH is not set CONFIG_INLINE_WRITE_UNLOCK_IRQ=y # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_FREEZER=y # # System Type # CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_MXS is not set # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_TEGRA is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set # CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P64X0 is not set # CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_EXYNOS4 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_TCC_926 is not set # CONFIG_ARCH_U300 is not set # CONFIG_ARCH_U8500 is not set # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y # CONFIG_PLAT_SPEAR is not set # CONFIG_ARCH_VT8500 is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # # TI OMAP Common Features # CONFIG_ARCH_OMAP_OTG=y # CONFIG_ARCH_OMAP1 is not set CONFIG_ARCH_OMAP2PLUS=y # # OMAP Feature Selections # CONFIG_OMAP_DEBUG_DEVICES=y # CONFIG_OMAP_SMARTREFLEX is not set # CONFIG_OMAP_RESET_CLOCKS is not set CONFIG_OMAP_MUX=y CONFIG_OMAP_MUX_DEBUG=y CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set CONFIG_OMAP_IOMMU=y # CONFIG_OMAP_IOMMU_DEBUG is not set CONFIG_OMAP_32K_TIMER=y # CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y CONFIG_MACH_OMAP_GENERIC=y # # TI OMAP2/3/4 Specific Features # CONFIG_ARCH_OMAP2PLUS_TYPICAL=y CONFIG_ARCH_OMAP2=y CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y # # OMAP Core Type # CONFIG_SOC_OMAP2420=y CONFIG_SOC_OMAP2430=y CONFIG_SOC_OMAP3430=y CONFIG_SOC_OMAPTI816X=y CONFIG_OMAP_PACKAGE_ZAF=y CONFIG_OMAP_PACKAGE_ZAC=y CONFIG_OMAP_PACKAGE_CBB=y CONFIG_OMAP_PACKAGE_CUS=y CONFIG_OMAP_PACKAGE_CBP=y CONFIG_OMAP_PACKAGE_CBL=y CONFIG_OMAP_PACKAGE_CBS=y # # OMAP Board Type # CONFIG_MACH_OMAP2_TUSB6010=y CONFIG_MACH_OMAP_H4=y CONFIG_MACH_OMAP_APOLLON=y CONFIG_MACH_OMAP_2430SDP=y CONFIG_MACH_OMAP3_BEAGLE=y CONFIG_MACH_DEVKIT8000=y CONFIG_MACH_OMAP_LDP=y CONFIG_MACH_OMAP3530_LV_SOM=y CONFIG_MACH_OMAP3_TORPEDO=y CONFIG_MACH_OVERO=y CONFIG_MACH_OMAP3EVM=y CONFIG_MACH_OMAP3517EVM=y # CONFIG_MACH_CRANEBOARD is not set CONFIG_MACH_OMAP3_PANDORA=y CONFIG_MACH_OMAP3_TOUCHBOOK=y CONFIG_MACH_OMAP_3430SDP=y CONFIG_MACH_NOKIA_N800=y CONFIG_MACH_NOKIA_N810=y CONFIG_MACH_NOKIA_N810_WIMAX=y CONFIG_MACH_NOKIA_N8X0=y CONFIG_MACH_NOKIA_RM680=y CONFIG_MACH_NOKIA_RX51=y CONFIG_MACH_OMAP_ZOOM2=y CONFIG_MACH_OMAP_ZOOM3=y CONFIG_MACH_CM_T35=y CONFIG_MACH_CM_T3517=y CONFIG_MACH_IGEP0020=y CONFIG_MACH_IGEP0030=y CONFIG_MACH_SBC3530=y CONFIG_MACH_OMAP_3630SDP=y CONFIG_MACH_TI8168EVM=y CONFIG_MACH_OMAP_4430SDP=y CONFIG_MACH_OMAP4_PANDA=y # CONFIG_OMAP3_EMU is not set # CONFIG_OMAP3_SDRC_AC_TIMING is not set # # System MMU # # # Processor Type # CONFIG_CPU_V6=y CONFIG_CPU_V7=y CONFIG_CPU_32v6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_ABRT_EV7=y CONFIG_CPU_PABRT_V6=y CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y CONFIG_CPU_TLB_V6=y CONFIG_CPU_TLB_V7=y CONFIG_CPU_HAS_ASID=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y CONFIG_CPU_USE_DOMAINS=y # # Processor Features # CONFIG_ARM_THUMB=y CONFIG_ARM_THUMBEE=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_OUTER_CACHE_SYNC=y CONFIG_CACHE_L2X0=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_ARM_ERRATA_411920=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set # CONFIG_ARM_ERRATA_742230 is not set # CONFIG_ARM_ERRATA_742231 is not set CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_720789=y CONFIG_PL310_ERRATA_727915=y # CONFIG_ARM_ERRATA_743622 is not set # CONFIG_ARM_ERRATA_751472 is not set # CONFIG_ARM_ERRATA_754322 is not set # CONFIG_ARM_ERRATA_754327 is not set CONFIG_ARM_GIC=y # # Bus support # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SMP_ON_UP=y CONFIG_HAVE_ARM_SCU=y CONFIG_HAVE_ARM_TWD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=2 CONFIG_HOTPLUG_CPU=y CONFIG_LOCAL_TIMERS=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=128 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_COMPACTION is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_LEDS=y CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_DEPRECATED_PARAM_STRUCT is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" # CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y # CONFIG_CRASH_DUMP is not set # CONFIG_AUTO_ZRELADDR is not set # # CPU Power Management # # CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # # Floating point emulation # # # At least one emulation must be selected # CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set # CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y CONFIG_NEON=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_MISC=y # # Power management options # CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y CONFIG_PM_RUNTIME=y CONFIG_PM=y CONFIG_PM_DEBUG=y # CONFIG_PM_VERBOSE is not set # CONFIG_PM_ADVANCED_DEBUG is not set # CONFIG_PM_TEST_SUSPEND is not set CONFIG_CAN_PM_TRACE=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_HAS_OPP=y CONFIG_PM_OPP=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # # CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set CONFIG_BT=m # CONFIG_BT_L2CAP is not set # CONFIG_BT_SCO is not set # # Bluetooth device drivers # # CONFIG_BT_HCIBTUSB is not set # CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y # CONFIG_BT_HCIUART_ATH3K is not set CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_BT_MRVL is not set # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_WEXT_SPY=y CONFIG_CFG80211=m # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set # CONFIG_CFG80211_INTERNAL_REGDB is not set CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y CONFIG_MAC80211_RC_DEFAULT_PID=y # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_TESTS is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_SM_FTL is not set CONFIG_MTD_OOPS=y # CONFIG_MTD_SWAP is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_BCH is not set # CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y # CONFIG_MTD_ONENAND_GENERIC is not set CONFIG_MTD_ONENAND_OMAP2=y # CONFIG_MTD_ONENAND_OTP is not set # CONFIG_MTD_ONENAND_2X_PROGRAM is not set # CONFIG_MTD_ONENAND_SIM is not set # # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set CONFIG_MTD_UBI=y CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_RESERVE=1 # CONFIG_MTD_UBI_GLUEBI is not set # CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MG_DISK is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set CONFIG_SCSI_SCAN_ASYNC=y CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set # CONFIG_BLK_DEV_DM is not set # CONFIG_TARGET_CORE is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set CONFIG_MII=y CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_BCM63XX_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_AX88796 is not set CONFIG_SMC91X=y # CONFIG_TI_DAVINCI_EMAC is not set # CONFIG_TI_DAVINCI_MDIO is not set # CONFIG_TI_DAVINCI_CPDMA is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set CONFIG_SMSC911X=y # CONFIG_SMSC911X_ARCH_HOOKS is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_KS8851=y CONFIG_KS8851_MLL=y # CONFIG_FTMAC100 is not set CONFIG_NETDEV_1000=y # CONFIG_STMMAC_ETH is not set CONFIG_NETDEV_10000=y CONFIG_WLAN=y # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AT76C50X_USB is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_ATH_COMMON is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_HOSTAP is not set # CONFIG_IWM is not set CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_SDIO=m # CONFIG_LIBERTAS_SPI is not set CONFIG_LIBERTAS_DEBUG=y # CONFIG_LIBERTAS_MESH is not set # CONFIG_P54_COMMON is not set # CONFIG_RT2X00 is not set # CONFIG_RTL8192CU is not set # CONFIG_WL1251 is not set # CONFIG_WL12XX_MENU is not set # CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set CONFIG_USB_USBNET=y CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_CDCETHER=y # CONFIG_USB_NET_CDC_EEM is not set CONFIG_USB_NET_CDC_NCM=y # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC75XX is not set CONFIG_USB_NET_SMSC95XX=y # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_PLUSB is not set # CONFIG_USB_NET_MCS7830 is not set # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set # CONFIG_USB_NET_CX82310_ETH is not set # CONFIG_USB_NET_INT51X1 is not set # CONFIG_USB_IPHETH is not set # CONFIG_USB_SIERRA_NET is not set # CONFIG_USB_VL600 is not set # CONFIG_WAN is not set # # CAIF transport drivers # # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_OMAP is not set # CONFIG_KEYBOARD_OMAP4 is not set CONFIG_KEYBOARD_TWL4030=y # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_TOUCHSCREEN_ST1232 is not set # CONFIG_TOUCHSCREEN_TPS6507X is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_ATI_REMOTE is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set CONFIG_INPUT_TWL4030_PWRBUTTON=y # CONFIG_INPUT_TWL4030_VIBRA is not set # CONFIG_INPUT_UINPUT is not set # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_CMA3000 is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set CONFIG_DEVKMEM=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX3107 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_OMAP=y CONFIG_SERIAL_OMAP_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_IFX6X60 is not set # CONFIG_TTY_PRINTK is not set # CONFIG_HVC_DCC is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_OMAP=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_RAMOOPS is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_OMAP=y # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_GPIO is not set # CONFIG_SPI_OC_TINY is not set CONFIG_SPI_OMAP24XX=y # CONFIG_SPI_PXA2XX_PCI is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # # PPS support # # CONFIG_PPS is not set # # PPS generators support # CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # # CONFIG_GPIO_BASIC_MMIO is not set # CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_SX150X is not set CONFIG_GPIO_TWL4030=y # CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: # # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_74X164 is not set # # AC97 GPIO expanders: # # # MODULbus GPIO expanders: # CONFIG_W1=y CONFIG_W1_CON=y # # 1-wire Bus Masters # # CONFIG_W1_MASTER_DS2490 is not set # CONFIG_W1_MASTER_DS2482 is not set # CONFIG_W1_MASTER_DS1WM is not set # CONFIG_W1_MASTER_GPIO is not set # CONFIG_HDQ_MASTER_OMAP is not set # # 1-wire Slaves # # CONFIG_W1_SLAVE_THERM is not set # CONFIG_W1_SLAVE_SMEM is not set # CONFIG_W1_SLAVE_DS2423 is not set # CONFIG_W1_SLAVE_DS2431 is not set # CONFIG_W1_SLAVE_DS2433 is not set # CONFIG_W1_SLAVE_DS2760 is not set # CONFIG_W1_SLAVE_BQ27000 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ20Z75 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_CHARGER_ISP1704 is not set # CONFIG_CHARGER_TWL4030 is not set # CONFIG_CHARGER_GPIO is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_GPIO_FAN is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH5627 is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_MPCORE_WATCHDOG is not set CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y # CONFIG_MAX63XX_WATCHDOG is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_MFD_SUPPORT=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_I2CPLD is not set # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set CONFIG_MENELAUS=y CONFIG_TWL4030_CORE=y # CONFIG_TWL4030_MADC is not set CONFIG_TWL4030_POWER=y # CONFIG_TWL4030_CODEC is not set # CONFIG_TWL6030_PWM is not set # CONFIG_MFD_STMPE is not set # CONFIG_MFD_TC3589X is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13XXX is not set # CONFIG_ABX500_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_WL1273_CORE is not set CONFIG_MFD_OMAP_USB_HOST=y CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_DUMMY is not set CONFIG_REGULATOR_FIXED_VOLTAGE=y # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set # CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set # CONFIG_REGULATOR_MAX8952 is not set CONFIG_REGULATOR_TWL4030=y # CONFIG_REGULATOR_LP3971 is not set # CONFIG_REGULATOR_LP3972 is not set CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y # CONFIG_REGULATOR_ISL6271A is not set # CONFIG_REGULATOR_AD5398 is not set # CONFIG_REGULATOR_TPS6524X is not set CONFIG_MEDIA_SUPPORT=y # # Multimedia core support # CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=y CONFIG_VIDEO_V4L2_COMMON=y CONFIG_VIDEO_V4L2_SUBDEV_API=y # CONFIG_DVB_CORE is not set CONFIG_VIDEO_MEDIA=y # # Multimedia drivers # CONFIG_RC_CORE=y CONFIG_LIRC=y CONFIG_RC_MAP=y CONFIG_IR_NEC_DECODER=y CONFIG_IR_RC5_DECODER=y CONFIG_IR_RC6_DECODER=y CONFIG_IR_JVC_DECODER=y CONFIG_IR_SONY_DECODER=y CONFIG_IR_RC5_SZ_DECODER=y CONFIG_IR_LIRC_CODEC=y # CONFIG_IR_IMON is not set # CONFIG_IR_MCEUSB is not set # CONFIG_IR_STREAMZAP is not set # CONFIG_RC_LOOPBACK is not set # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=y CONFIG_MEDIA_TUNER_CUSTOMISE=y # # Customize TV tuners # CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_MT2060=m CONFIG_MEDIA_TUNER_MT2266=m CONFIG_MEDIA_TUNER_MT2131=m CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_MEDIA_TUNER_TDA18218=m CONFIG_VIDEO_V4L2=y CONFIG_VIDEOBUF_GEN=y CONFIG_VIDEOBUF_DMA_CONTIG=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set # CONFIG_VIDEO_IR_I2C is not set # # Encoders/decoders and other helper chips # # # Audio decoders # # CONFIG_VIDEO_TVAUDIO is not set # CONFIG_VIDEO_TDA7432 is not set # CONFIG_VIDEO_TDA9840 is not set # CONFIG_VIDEO_TEA6415C is not set # CONFIG_VIDEO_TEA6420 is not set # CONFIG_VIDEO_MSP3400 is not set # CONFIG_VIDEO_CS5345 is not set # CONFIG_VIDEO_CS53L32A is not set # CONFIG_VIDEO_M52790 is not set # CONFIG_VIDEO_TLV320AIC23B is not set # CONFIG_VIDEO_WM8775 is not set # CONFIG_VIDEO_WM8739 is not set # CONFIG_VIDEO_VP27SMPX is not set # # RDS decoders # # CONFIG_VIDEO_SAA6588 is not set # # Video decoders # # CONFIG_VIDEO_ADV7180 is not set # CONFIG_VIDEO_BT819 is not set # CONFIG_VIDEO_BT856 is not set # CONFIG_VIDEO_BT866 is not set # CONFIG_VIDEO_KS0127 is not set # CONFIG_VIDEO_OV7670 is not set CONFIG_VIDEO_MT9P031=y # CONFIG_VIDEO_MT9V011 is not set # CONFIG_VIDEO_TCM825X is not set # CONFIG_VIDEO_SAA7110 is not set # CONFIG_VIDEO_SAA711X is not set # CONFIG_VIDEO_SAA717X is not set # CONFIG_VIDEO_SAA7191 is not set # CONFIG_VIDEO_TVP514X is not set # CONFIG_VIDEO_TVP5150 is not set # CONFIG_VIDEO_TVP7002 is not set # CONFIG_VIDEO_VPX3220 is not set # # Video and audio decoders # # CONFIG_VIDEO_CX25840 is not set # # MPEG video encoders # # CONFIG_VIDEO_CX2341X is not set # # Video encoders # # CONFIG_VIDEO_SAA7127 is not set # CONFIG_VIDEO_SAA7185 is not set # CONFIG_VIDEO_ADV7170 is not set # CONFIG_VIDEO_ADV7175 is not set # CONFIG_VIDEO_THS7303 is not set # CONFIG_VIDEO_ADV7343 is not set # CONFIG_VIDEO_AK881X is not set # # Video improvement chips # # CONFIG_VIDEO_UPD64031A is not set # CONFIG_VIDEO_UPD64083 is not set # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_VPFE_CAPTURE is not set CONFIG_VIDEO_OMAP2_VOUT=y # CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_TIMBERDALE is not set # CONFIG_VIDEO_SR030PC30 is not set # CONFIG_VIDEO_NOON010PC30 is not set CONFIG_VIDEO_OMAP3=y CONFIG_VIDEO_OMAP3_DEBUG=y # CONFIG_SOC_CAMERA is not set # CONFIG_VIDEO_OMAP2 is not set # CONFIG_V4L_USB_DRIVERS is not set # CONFIG_V4L_MEM2MEM_DRIVERS is not set # CONFIG_RADIO_ADAPTERS is not set # # Graphics support # # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_WMT_GE_ROPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set CONFIG_FB_OMAP_LCD_VGA=y # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set CONFIG_OMAP2_VRAM=y CONFIG_OMAP2_VRFB=y CONFIG_OMAP2_DSS=y CONFIG_OMAP2_VRAM_SIZE=0 CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y # CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set CONFIG_OMAP2_DSS_DPI=y CONFIG_OMAP2_DSS_RFBI=y CONFIG_OMAP2_DSS_VENC=y CONFIG_OMAP4_DSS_HDMI=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y # CONFIG_OMAP2_DSS_USE_DSI_PLL is not set # CONFIG_OMAP2_DSS_FAKE_VSYNC is not set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 CONFIG_FB_OMAP2=m CONFIG_FB_OMAP2_DEBUG_SUPPORT=y CONFIG_FB_OMAP2_NUM_FBS=3 # # OMAP2/3 Display Device Drivers # CONFIG_PANEL_GENERIC_DPI=m # CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set CONFIG_PANEL_SHARP_LS037V7DW01=m CONFIG_PANEL_NEC_NL8048HL11_01B=m CONFIG_PANEL_TAAL=m CONFIG_PANEL_TPO_TD043MTEA1=m CONFIG_PANEL_ACX565AKM=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set CONFIG_LCD_PLATFORM=y # CONFIG_LCD_S6E63M0 is not set # CONFIG_LCD_LD9040 is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y # CONFIG_BACKLIGHT_ADP8860 is not set # # Display device support # CONFIG_DISPLAY_SUPPORT=y # # Display hardware drivers # # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y # CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # # Special HID drivers # # CONFIG_HID_3M_PCT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_ACRUX is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_CANDO is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KEYTOUCH is not set # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MOSART is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_QUANTA is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_ROCCAT_ARVO is not set # CONFIG_HID_ROCCAT_KONE is not set # CONFIG_HID_ROCCAT_KONEPLUS is not set # CONFIG_HID_ROCCAT_KOVAPLUS is not set # CONFIG_HID_ROCCAT_PYRA is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_STANTUM is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y CONFIG_USB_WUSB=y # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_HCD_OMAP=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_TUSB6010=y # CONFIG_USB_MUSB_OMAP2PLUS is not set # CONFIG_USB_MUSB_AM35X is not set CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_PERIPHERAL is not set # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y CONFIG_MUSB_PIO_ONLY=y # CONFIG_USB_MUSB_DEBUG is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set CONFIG_USB_WDM=y # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # CONFIG_USB_UAS is not set CONFIG_USB_LIBUSUAL=y # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DEBUG_FILES=y CONFIG_USB_GADGET_DEBUG_FS=y CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_FUSB300=y CONFIG_USB_FUSB300=y # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA_U2O is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_ZERO=m # CONFIG_USB_ETH is not set # CONFIG_USB_G_NCM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FUNCTIONFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_USB_G_MULTI is not set # CONFIG_USB_G_HID is not set # CONFIG_USB_G_DBGP is not set # CONFIG_USB_G_WEBCAM is not set # # OTG and related infrastructure # CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_ISP1301_OMAP is not set # CONFIG_USB_ULPI is not set CONFIG_TWL4030_USB=y CONFIG_TWL6030_USB=y CONFIG_NOP_USB_XCEIV=y CONFIG_UWB=y CONFIG_UWB_HWA=y # CONFIG_UWB_I1480U is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y # CONFIG_MMC_CLKGATE is not set # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_MINORS=8 CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_SDIO_UART=y # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y # CONFIG_MMC_SPI is not set # CONFIG_MMC_DW is not set # CONFIG_MMC_USHC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_NFC_DEVICES is not set # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set # CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_CLKDEV_LOOKUP=y # CONFIG_HWSPINLOCK is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_FANOTIFY is not set CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_WBUF_VERIFY is not set CONFIG_JFFS2_SUMMARY=y CONFIG_JFFS2_FS_XATTR=y CONFIG_JFFS2_FS_POSIX_ACL=y CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_RUBIN=y # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set CONFIG_UBIFS_FS=y # CONFIG_UBIFS_FS_XATTR is not set # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set # CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_PSTORE is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y # CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y # CONFIG_NFS_USE_NEW_IDMAPPER is not set # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y # CONFIG_BSD_DISKLABEL is not set # CONFIG_MINIX_SUBPARTITION is not set # CONFIG_SOLARIS_X86_PARTITION is not set # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # # Kernel hacking # CONFIG_PRINTK_TIME=y CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_HARDLOCKUP_DETECTOR is not set # CONFIG_SPARSE_RCU_POINTER is not set CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LKDTM is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_EVENT_POWER_TRACING_DEPRECATED=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_KPROBE_EVENT=y # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_TEST_KSTRTOX is not set # CONFIG_STRICT_DEVMEM is not set CONFIG_ARM_UNWIND=y # CONFIG_DEBUG_USER is not set # CONFIG_OC_ETM is not set # # Security options # CONFIG_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_NETWORK is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_SECURITY_APPARMOR is not set # CONFIG_IMA is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=m # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=y # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_OMAP_SHAM is not set # CONFIG_CRYPTO_DEV_OMAP_AES is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y # CONFIG_XZ_DEC is not set # CONFIG_XZ_DEC_BCJ is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CPU_RMAP=y CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y CONFIG_AVERAGE=y
Op 26 mei 2011, om 09:24 heeft Javier Martin het volgende geschreven: > Hi Koen, > > On 25 May 2011 15:38, Koen Kooi <koen@beagleboard.org> wrote: >> >> Op 25 mei 2011, om 13:16 heeft Javier Martin het volgende geschreven: >> >>> It includes several fixes pointed out by Laurent Pinchart. However, >>> the BUG which shows artifacts in the image (horizontal lines) still >>> persists. It won't happen if 1v8 regulator is not disabled (i.e. >>> comment line where it is disabled in function "mt9p031_power_off"). >>> I know there can be some other details to fix but I would like someone >>> could help in the power management issue. >> >> I tried this + your beagle patch on 2.6.39 and both ISP and sensor being builtin to the kernel, I get the following: >> >> root@beagleboardxMC:~# media-ctl -r -l '"mt9p031 2-0048":0->"OMAP3 ISP CCDC":0[1 ], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' >> Resetting all links to inactive >> Setting up link 16:0 -> 5:0 [1] >> Setting up link 5:1 -> 6:0 [1] >> >> root@beagleboardxMC:~# media-ctl -f '"mt9p031 2-0048":0[SGRBG12 320x240], "OMAP3 ISP CCDC":0[SGRBG8 320x240], "OMAP3 ISP CCDC":1[SGRBG8 320x240]' >> Setting up format SGRBG12 320x240 on pad mt9p031 2-0048/0 >> Format set: SGRBG12 320x240 >> Setting up format SGRBG12 320x240 on pad OMAP3 ISP CCDC/0 >> Format set: SGRBG12 320x240 >> Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/0 >> Format set: SGRBG8 320x240 >> Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/1 >> Format set: SGRBG8 320x240 >> >> oot@beagleboardxMC:~# yavta -f SGRBG8 -s 320x240 -n 4 --capture=10 --skip 3 -F `media-ctl -e "OMAP3 ISP CCDC output"` >> Device /dev/video2 opened. >> Device `OMAP3 ISP CCDC output' on `media' is a video capture device. >> Video format set: SGRBG8 (47425247) 320x240 buffer size 76800 >> Video format: SGRBG8 (47425247) 320x240 buffer size 76800 >> 4 buffers requested. >> length: 76800 offset: 0 >> Buffer 0 mapped at address 0x4030d000. >> length: 76800 offset: 77824 >> Buffer 1 mapped at address 0x40330000. >> length: 76800 offset: 155648 >> Buffer 2 mapped at address 0x4042d000. >> length: 76800 offset: 233472 >> Buffer 3 mapped at address 0x40502000. >> [ 4131.459930] omap3isp omap3isp: CCDC won't become idle! > > Please, test it again using new RFC v3 I've just submitted. Slightly better: Video format: SGRBG8 (47425247) 320x240 buffer size 76800 4 buffers requested. length: 76800 offset: 0 Buffer 0 mapped at address 0x401d1000. length: 76800 offset: 77824 Buffer 1 mapped at address 0x40266000. length: 76800 offset: 155648 Buffer 2 mapped at address 0x402c6000. length: 76800 offset: 233472 Buffer 3 mapped at address 0x4036e000. 0 (0) [-] 4294967295 76800 bytes 110.899139 1306398890.364593 0.001 fps 1 (1) [-] 4294967295 76800 bytes 111.128997 1306398890.594421 4.351 fps [ 111.214019] omap3isp omap3isp: CCDC won't become idle! > I have personally tested it against kernel 2.6.39 with the following > .config file: And with that config: [ 4.250244] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2) [ 4.257720] Please append a correct "root=" boot option; here are the available partitions: [ 4.266540] b300 7977472 mmcblk0 driver: mmcblk [ 4.272125] b301 72261 mmcblk0p1 00000000-0000-0000-0000-000000000mmcblk0p1 [ 4.280578] b302 7903980 mmcblk0p2 00000000-0000-0000-0000-000000000mmcblk0p2 [ 4.289031] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) Which is the good old kernel-mux-is-broken problem again, after turning off kernel-mux: 0 (0) [-] 4294967295 76800 bytes 29.186920 1306399517.283752 0.001 fps 1 (1) [-] 4294967295 76800 bytes 29.416778 1306399517.513580 4.351 fps 2 (2) [-] 4294967295 76800 bytes 29.528137 1306399517.624938 8.980 fps [ 29.616943] omap3isp omap3isp: CCDC won't become idle! So that seems to be the same as with my config. How do I view the files yavta dumps? All done on a xM revision C regards, Koen > > # > # Automatically generated make config: don't edit > # Linux/arm 2.6.39-rc6 Kernel Configuration > # Thu May 5 11:44:15 2011 > # > CONFIG_ARM=y > CONFIG_SYS_SUPPORTS_APM_EMULATION=y > CONFIG_HAVE_SCHED_CLOCK=y > CONFIG_GENERIC_GPIO=y > # CONFIG_ARCH_USES_GETTIMEOFFSET is not set > CONFIG_GENERIC_CLOCKEVENTS=y > CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y > CONFIG_KTIME_SCALAR=y > CONFIG_HAVE_PROC_CPU=y > CONFIG_STACKTRACE_SUPPORT=y > CONFIG_LOCKDEP_SUPPORT=y > CONFIG_TRACE_IRQFLAGS_SUPPORT=y > CONFIG_HARDIRQS_SW_RESEND=y > CONFIG_GENERIC_IRQ_PROBE=y > CONFIG_RWSEM_GENERIC_SPINLOCK=y > CONFIG_ARCH_HAS_CPUFREQ=y > CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y > CONFIG_GENERIC_HWEIGHT=y > CONFIG_GENERIC_CALIBRATE_DELAY=y > CONFIG_NEED_DMA_MAP_STATE=y > CONFIG_VECTORS_BASE=0xffff0000 > # CONFIG_ARM_PATCH_PHYS_VIRT is not set > CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" > CONFIG_CONSTRUCTORS=y > CONFIG_HAVE_IRQ_WORK=y > CONFIG_IRQ_WORK=y > > # > # General setup > # > CONFIG_EXPERIMENTAL=y > CONFIG_INIT_ENV_ARG_LIMIT=32 > CONFIG_CROSS_COMPILE="" > CONFIG_LOCALVERSION="" > CONFIG_LOCALVERSION_AUTO=y > CONFIG_HAVE_KERNEL_GZIP=y > CONFIG_HAVE_KERNEL_LZMA=y > CONFIG_HAVE_KERNEL_LZO=y > CONFIG_KERNEL_GZIP=y > # CONFIG_KERNEL_LZMA is not set > # CONFIG_KERNEL_LZO is not set > CONFIG_SWAP=y > CONFIG_SYSVIPC=y > CONFIG_SYSVIPC_SYSCTL=y > CONFIG_POSIX_MQUEUE=y > CONFIG_POSIX_MQUEUE_SYSCTL=y > CONFIG_BSD_PROCESS_ACCT=y > # CONFIG_BSD_PROCESS_ACCT_V3 is not set > # CONFIG_FHANDLE is not set > # CONFIG_TASKSTATS is not set > # CONFIG_AUDIT is not set > CONFIG_HAVE_GENERIC_HARDIRQS=y > > # > # IRQ subsystem > # > CONFIG_GENERIC_HARDIRQS=y > CONFIG_HAVE_SPARSE_IRQ=y > CONFIG_GENERIC_IRQ_SHOW=y > # CONFIG_SPARSE_IRQ is not set > > # > # RCU Subsystem > # > CONFIG_TREE_RCU=y > # CONFIG_PREEMPT_RCU is not set > # CONFIG_RCU_TRACE is not set > CONFIG_RCU_FANOUT=32 > # CONFIG_RCU_FANOUT_EXACT is not set > # CONFIG_RCU_FAST_NO_HZ is not set > # CONFIG_TREE_RCU_TRACE is not set > CONFIG_IKCONFIG=y > CONFIG_IKCONFIG_PROC=y > CONFIG_LOG_BUF_SHIFT=16 > # CONFIG_CGROUPS is not set > # CONFIG_NAMESPACES is not set > # CONFIG_SCHED_AUTOGROUP is not set > # CONFIG_SYSFS_DEPRECATED is not set > # CONFIG_RELAY is not set > CONFIG_BLK_DEV_INITRD=y > CONFIG_INITRAMFS_SOURCE="" > CONFIG_RD_GZIP=y > # CONFIG_RD_BZIP2 is not set > # CONFIG_RD_LZMA is not set > # CONFIG_RD_XZ is not set > # CONFIG_RD_LZO is not set > CONFIG_CC_OPTIMIZE_FOR_SIZE=y > CONFIG_SYSCTL=y > CONFIG_ANON_INODES=y > CONFIG_EXPERT=y > CONFIG_UID16=y > # CONFIG_SYSCTL_SYSCALL is not set > CONFIG_KALLSYMS=y > CONFIG_KALLSYMS_EXTRA_PASS=y > CONFIG_HOTPLUG=y > CONFIG_PRINTK=y > CONFIG_BUG=y > CONFIG_ELF_CORE=y > CONFIG_BASE_FULL=y > CONFIG_FUTEX=y > CONFIG_EPOLL=y > CONFIG_SIGNALFD=y > CONFIG_TIMERFD=y > CONFIG_EVENTFD=y > CONFIG_SHMEM=y > CONFIG_AIO=y > # CONFIG_EMBEDDED is not set > CONFIG_HAVE_PERF_EVENTS=y > CONFIG_PERF_USE_VMALLOC=y > > # > # Kernel Performance Events And Counters > # > CONFIG_PERF_EVENTS=y > # CONFIG_PERF_COUNTERS is not set > CONFIG_VM_EVENT_COUNTERS=y > CONFIG_COMPAT_BRK=y > CONFIG_SLAB=y > # CONFIG_SLUB is not set > # CONFIG_SLOB is not set > CONFIG_PROFILING=y > CONFIG_TRACEPOINTS=y > CONFIG_OPROFILE=y > CONFIG_HAVE_OPROFILE=y > CONFIG_KPROBES=y > CONFIG_KRETPROBES=y > CONFIG_HAVE_KPROBES=y > CONFIG_HAVE_KRETPROBES=y > CONFIG_USE_GENERIC_SMP_HELPERS=y > CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y > CONFIG_HAVE_CLK=y > CONFIG_HAVE_DMA_API_DEBUG=y > CONFIG_HAVE_HW_BREAKPOINT=y > > # > # GCOV-based kernel profiling > # > # CONFIG_GCOV_KERNEL is not set > CONFIG_HAVE_GENERIC_DMA_COHERENT=y > CONFIG_SLABINFO=y > CONFIG_RT_MUTEXES=y > CONFIG_BASE_SMALL=0 > CONFIG_MODULES=y > CONFIG_MODULE_FORCE_LOAD=y > CONFIG_MODULE_UNLOAD=y > CONFIG_MODULE_FORCE_UNLOAD=y > CONFIG_MODVERSIONS=y > CONFIG_MODULE_SRCVERSION_ALL=y > CONFIG_STOP_MACHINE=y > CONFIG_BLOCK=y > CONFIG_LBDAF=y > # CONFIG_BLK_DEV_BSG is not set > # CONFIG_BLK_DEV_INTEGRITY is not set > > # > # IO Schedulers > # > CONFIG_IOSCHED_NOOP=y > CONFIG_IOSCHED_DEADLINE=y > CONFIG_IOSCHED_CFQ=y > # CONFIG_DEFAULT_DEADLINE is not set > CONFIG_DEFAULT_CFQ=y > # CONFIG_DEFAULT_NOOP is not set > CONFIG_DEFAULT_IOSCHED="cfq" > # CONFIG_INLINE_SPIN_TRYLOCK is not set > # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set > # CONFIG_INLINE_SPIN_LOCK is not set > # CONFIG_INLINE_SPIN_LOCK_BH is not set > # CONFIG_INLINE_SPIN_LOCK_IRQ is not set > # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set > CONFIG_INLINE_SPIN_UNLOCK=y > # CONFIG_INLINE_SPIN_UNLOCK_BH is not set > CONFIG_INLINE_SPIN_UNLOCK_IRQ=y > # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set > # CONFIG_INLINE_READ_TRYLOCK is not set > # CONFIG_INLINE_READ_LOCK is not set > # CONFIG_INLINE_READ_LOCK_BH is not set > # CONFIG_INLINE_READ_LOCK_IRQ is not set > # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set > CONFIG_INLINE_READ_UNLOCK=y > # CONFIG_INLINE_READ_UNLOCK_BH is not set > CONFIG_INLINE_READ_UNLOCK_IRQ=y > # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set > # CONFIG_INLINE_WRITE_TRYLOCK is not set > # CONFIG_INLINE_WRITE_LOCK is not set > # CONFIG_INLINE_WRITE_LOCK_BH is not set > # CONFIG_INLINE_WRITE_LOCK_IRQ is not set > # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set > CONFIG_INLINE_WRITE_UNLOCK=y > # CONFIG_INLINE_WRITE_UNLOCK_BH is not set > CONFIG_INLINE_WRITE_UNLOCK_IRQ=y > # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set > CONFIG_MUTEX_SPIN_ON_OWNER=y > CONFIG_FREEZER=y > > # > # System Type > # > CONFIG_MMU=y > # CONFIG_ARCH_INTEGRATOR is not set > # CONFIG_ARCH_REALVIEW is not set > # CONFIG_ARCH_VERSATILE is not set > # CONFIG_ARCH_VEXPRESS is not set > # CONFIG_ARCH_AT91 is not set > # CONFIG_ARCH_BCMRING is not set > # CONFIG_ARCH_CLPS711X is not set > # CONFIG_ARCH_CNS3XXX is not set > # CONFIG_ARCH_GEMINI is not set > # CONFIG_ARCH_EBSA110 is not set > # CONFIG_ARCH_EP93XX is not set > # CONFIG_ARCH_FOOTBRIDGE is not set > # CONFIG_ARCH_MXC is not set > # CONFIG_ARCH_MXS is not set > # CONFIG_ARCH_STMP3XXX is not set > # CONFIG_ARCH_NETX is not set > # CONFIG_ARCH_H720X is not set > # CONFIG_ARCH_IOP13XX is not set > # CONFIG_ARCH_IOP32X is not set > # CONFIG_ARCH_IOP33X is not set > # CONFIG_ARCH_IXP23XX is not set > # CONFIG_ARCH_IXP2000 is not set > # CONFIG_ARCH_IXP4XX is not set > # CONFIG_ARCH_DOVE is not set > # CONFIG_ARCH_KIRKWOOD is not set > # CONFIG_ARCH_LOKI is not set > # CONFIG_ARCH_LPC32XX is not set > # CONFIG_ARCH_MV78XX0 is not set > # CONFIG_ARCH_ORION5X is not set > # CONFIG_ARCH_MMP is not set > # CONFIG_ARCH_KS8695 is not set > # CONFIG_ARCH_NS9XXX is not set > # CONFIG_ARCH_W90X900 is not set > # CONFIG_ARCH_NUC93X is not set > # CONFIG_ARCH_TEGRA is not set > # CONFIG_ARCH_PNX4008 is not set > # CONFIG_ARCH_PXA is not set > # CONFIG_ARCH_MSM is not set > # CONFIG_ARCH_SHMOBILE is not set > # CONFIG_ARCH_RPC is not set > # CONFIG_ARCH_SA1100 is not set > # CONFIG_ARCH_S3C2410 is not set > # CONFIG_ARCH_S3C64XX is not set > # CONFIG_ARCH_S5P64X0 is not set > # CONFIG_ARCH_S5P6442 is not set > # CONFIG_ARCH_S5PC100 is not set > # CONFIG_ARCH_S5PV210 is not set > # CONFIG_ARCH_EXYNOS4 is not set > # CONFIG_ARCH_SHARK is not set > # CONFIG_ARCH_TCC_926 is not set > # CONFIG_ARCH_U300 is not set > # CONFIG_ARCH_U8500 is not set > # CONFIG_ARCH_NOMADIK is not set > # CONFIG_ARCH_DAVINCI is not set > CONFIG_ARCH_OMAP=y > # CONFIG_PLAT_SPEAR is not set > # CONFIG_ARCH_VT8500 is not set > # CONFIG_GPIO_PCA953X is not set > # CONFIG_KEYBOARD_GPIO_POLLED is not set > > # > # TI OMAP Common Features > # > CONFIG_ARCH_OMAP_OTG=y > # CONFIG_ARCH_OMAP1 is not set > CONFIG_ARCH_OMAP2PLUS=y > > # > # OMAP Feature Selections > # > CONFIG_OMAP_DEBUG_DEVICES=y > # CONFIG_OMAP_SMARTREFLEX is not set > # CONFIG_OMAP_RESET_CLOCKS is not set > CONFIG_OMAP_MUX=y > CONFIG_OMAP_MUX_DEBUG=y > CONFIG_OMAP_MUX_WARNINGS=y > CONFIG_OMAP_MCBSP=y > # CONFIG_OMAP_MBOX_FWK is not set > CONFIG_OMAP_IOMMU=y > # CONFIG_OMAP_IOMMU_DEBUG is not set > CONFIG_OMAP_32K_TIMER=y > # CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set > CONFIG_OMAP_32K_TIMER_HZ=128 > CONFIG_OMAP_DM_TIMER=y > # CONFIG_OMAP_PM_NONE is not set > CONFIG_OMAP_PM_NOOP=y > CONFIG_MACH_OMAP_GENERIC=y > > # > # TI OMAP2/3/4 Specific Features > # > CONFIG_ARCH_OMAP2PLUS_TYPICAL=y > CONFIG_ARCH_OMAP2=y > CONFIG_ARCH_OMAP3=y > CONFIG_ARCH_OMAP4=y > > # > # OMAP Core Type > # > CONFIG_SOC_OMAP2420=y > CONFIG_SOC_OMAP2430=y > CONFIG_SOC_OMAP3430=y > CONFIG_SOC_OMAPTI816X=y > CONFIG_OMAP_PACKAGE_ZAF=y > CONFIG_OMAP_PACKAGE_ZAC=y > CONFIG_OMAP_PACKAGE_CBB=y > CONFIG_OMAP_PACKAGE_CUS=y > CONFIG_OMAP_PACKAGE_CBP=y > CONFIG_OMAP_PACKAGE_CBL=y > CONFIG_OMAP_PACKAGE_CBS=y > > # > # OMAP Board Type > # > CONFIG_MACH_OMAP2_TUSB6010=y > CONFIG_MACH_OMAP_H4=y > CONFIG_MACH_OMAP_APOLLON=y > CONFIG_MACH_OMAP_2430SDP=y > CONFIG_MACH_OMAP3_BEAGLE=y > CONFIG_MACH_DEVKIT8000=y > CONFIG_MACH_OMAP_LDP=y > CONFIG_MACH_OMAP3530_LV_SOM=y > CONFIG_MACH_OMAP3_TORPEDO=y > CONFIG_MACH_OVERO=y > CONFIG_MACH_OMAP3EVM=y > CONFIG_MACH_OMAP3517EVM=y > # CONFIG_MACH_CRANEBOARD is not set > CONFIG_MACH_OMAP3_PANDORA=y > CONFIG_MACH_OMAP3_TOUCHBOOK=y > CONFIG_MACH_OMAP_3430SDP=y > CONFIG_MACH_NOKIA_N800=y > CONFIG_MACH_NOKIA_N810=y > CONFIG_MACH_NOKIA_N810_WIMAX=y > CONFIG_MACH_NOKIA_N8X0=y > CONFIG_MACH_NOKIA_RM680=y > CONFIG_MACH_NOKIA_RX51=y > CONFIG_MACH_OMAP_ZOOM2=y > CONFIG_MACH_OMAP_ZOOM3=y > CONFIG_MACH_CM_T35=y > CONFIG_MACH_CM_T3517=y > CONFIG_MACH_IGEP0020=y > CONFIG_MACH_IGEP0030=y > CONFIG_MACH_SBC3530=y > CONFIG_MACH_OMAP_3630SDP=y > CONFIG_MACH_TI8168EVM=y > CONFIG_MACH_OMAP_4430SDP=y > CONFIG_MACH_OMAP4_PANDA=y > # CONFIG_OMAP3_EMU is not set > # CONFIG_OMAP3_SDRC_AC_TIMING is not set > > # > # System MMU > # > > # > # Processor Type > # > CONFIG_CPU_V6=y > CONFIG_CPU_V7=y > CONFIG_CPU_32v6=y > CONFIG_CPU_32v6K=y > CONFIG_CPU_32v7=y > CONFIG_CPU_ABRT_EV6=y > CONFIG_CPU_ABRT_EV7=y > CONFIG_CPU_PABRT_V6=y > CONFIG_CPU_PABRT_V7=y > CONFIG_CPU_CACHE_V6=y > CONFIG_CPU_CACHE_V7=y > CONFIG_CPU_CACHE_VIPT=y > CONFIG_CPU_COPY_V6=y > CONFIG_CPU_TLB_V6=y > CONFIG_CPU_TLB_V7=y > CONFIG_CPU_HAS_ASID=y > CONFIG_CPU_CP15=y > CONFIG_CPU_CP15_MMU=y > CONFIG_CPU_USE_DOMAINS=y > > # > # Processor Features > # > CONFIG_ARM_THUMB=y > CONFIG_ARM_THUMBEE=y > # CONFIG_CPU_ICACHE_DISABLE is not set > # CONFIG_CPU_DCACHE_DISABLE is not set > # CONFIG_CPU_BPREDICT_DISABLE is not set > CONFIG_OUTER_CACHE=y > CONFIG_OUTER_CACHE_SYNC=y > CONFIG_CACHE_L2X0=y > CONFIG_ARM_L1_CACHE_SHIFT=5 > CONFIG_ARM_DMA_MEM_BUFFERABLE=y > CONFIG_ARM_ERRATA_411920=y > # CONFIG_ARM_ERRATA_430973 is not set > # CONFIG_ARM_ERRATA_458693 is not set > # CONFIG_ARM_ERRATA_460075 is not set > # CONFIG_ARM_ERRATA_742230 is not set > # CONFIG_ARM_ERRATA_742231 is not set > CONFIG_PL310_ERRATA_588369=y > CONFIG_ARM_ERRATA_720789=y > CONFIG_PL310_ERRATA_727915=y > # CONFIG_ARM_ERRATA_743622 is not set > # CONFIG_ARM_ERRATA_751472 is not set > # CONFIG_ARM_ERRATA_754322 is not set > # CONFIG_ARM_ERRATA_754327 is not set > CONFIG_ARM_GIC=y > > # > # Bus support > # > # CONFIG_PCI_SYSCALL is not set > # CONFIG_ARCH_SUPPORTS_MSI is not set > # CONFIG_PCCARD is not set > > # > # Kernel Features > # > CONFIG_TICK_ONESHOT=y > CONFIG_NO_HZ=y > CONFIG_HIGH_RES_TIMERS=y > CONFIG_GENERIC_CLOCKEVENTS_BUILD=y > CONFIG_SMP=y > CONFIG_SMP_ON_UP=y > CONFIG_HAVE_ARM_SCU=y > CONFIG_HAVE_ARM_TWD=y > CONFIG_VMSPLIT_3G=y > # CONFIG_VMSPLIT_2G is not set > # CONFIG_VMSPLIT_1G is not set > CONFIG_PAGE_OFFSET=0xC0000000 > CONFIG_NR_CPUS=2 > CONFIG_HOTPLUG_CPU=y > CONFIG_LOCAL_TIMERS=y > CONFIG_PREEMPT_NONE=y > # CONFIG_PREEMPT_VOLUNTARY is not set > # CONFIG_PREEMPT is not set > CONFIG_HZ=128 > CONFIG_AEABI=y > CONFIG_OABI_COMPAT=y > CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y > # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set > # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set > # CONFIG_HIGHMEM is not set > CONFIG_SELECT_MEMORY_MODEL=y > CONFIG_FLATMEM_MANUAL=y > CONFIG_FLATMEM=y > CONFIG_FLAT_NODE_MEM_MAP=y > CONFIG_HAVE_MEMBLOCK=y > CONFIG_PAGEFLAGS_EXTENDED=y > CONFIG_SPLIT_PTLOCK_CPUS=4 > # CONFIG_COMPACTION is not set > # CONFIG_PHYS_ADDR_T_64BIT is not set > CONFIG_ZONE_DMA_FLAG=0 > CONFIG_VIRT_TO_BUS=y > # CONFIG_KSM is not set > CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 > CONFIG_FORCE_MAX_ZONEORDER=11 > CONFIG_LEDS=y > CONFIG_ALIGNMENT_TRAP=y > # CONFIG_UACCESS_WITH_MEMCPY is not set > # CONFIG_SECCOMP is not set > # CONFIG_CC_STACKPROTECTOR is not set > # CONFIG_DEPRECATED_PARAM_STRUCT is not set > > # > # Boot options > # > CONFIG_ZBOOT_ROM_TEXT=0x0 > CONFIG_ZBOOT_ROM_BSS=0x0 > CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" > # CONFIG_CMDLINE_FORCE is not set > # CONFIG_XIP_KERNEL is not set > CONFIG_KEXEC=y > CONFIG_ATAGS_PROC=y > # CONFIG_CRASH_DUMP is not set > # CONFIG_AUTO_ZRELADDR is not set > > # > # CPU Power Management > # > # CONFIG_CPU_FREQ is not set > # CONFIG_CPU_IDLE is not set > > # > # Floating point emulation > # > > # > # At least one emulation must be selected > # > CONFIG_FPE_NWFPE=y > # CONFIG_FPE_NWFPE_XP is not set > # CONFIG_FPE_FASTFPE is not set > CONFIG_VFP=y > CONFIG_VFPv3=y > CONFIG_NEON=y > > # > # Userspace binary formats > # > CONFIG_BINFMT_ELF=y > CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y > CONFIG_HAVE_AOUT=y > # CONFIG_BINFMT_AOUT is not set > CONFIG_BINFMT_MISC=y > > # > # Power management options > # > CONFIG_SUSPEND=y > CONFIG_SUSPEND_FREEZER=y > CONFIG_PM_SLEEP=y > CONFIG_PM_SLEEP_SMP=y > CONFIG_PM_RUNTIME=y > CONFIG_PM=y > CONFIG_PM_DEBUG=y > # CONFIG_PM_VERBOSE is not set > # CONFIG_PM_ADVANCED_DEBUG is not set > # CONFIG_PM_TEST_SUSPEND is not set > CONFIG_CAN_PM_TRACE=y > # CONFIG_APM_EMULATION is not set > CONFIG_ARCH_HAS_OPP=y > CONFIG_PM_OPP=y > CONFIG_ARCH_SUSPEND_POSSIBLE=y > CONFIG_NET=y > > # > # Networking options > # > CONFIG_PACKET=y > CONFIG_UNIX=y > CONFIG_XFRM=y > CONFIG_XFRM_USER=y > # CONFIG_XFRM_SUB_POLICY is not set > CONFIG_XFRM_MIGRATE=y > # CONFIG_XFRM_STATISTICS is not set > CONFIG_NET_KEY=y > CONFIG_NET_KEY_MIGRATE=y > CONFIG_INET=y > CONFIG_IP_MULTICAST=y > # CONFIG_IP_ADVANCED_ROUTER is not set > CONFIG_IP_PNP=y > CONFIG_IP_PNP_DHCP=y > CONFIG_IP_PNP_BOOTP=y > CONFIG_IP_PNP_RARP=y > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE_DEMUX is not set > # CONFIG_IP_MROUTE is not set > # CONFIG_ARPD is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_INET_AH is not set > # CONFIG_INET_ESP is not set > # CONFIG_INET_IPCOMP is not set > # CONFIG_INET_XFRM_TUNNEL is not set > # CONFIG_INET_TUNNEL is not set > CONFIG_INET_XFRM_MODE_TRANSPORT=y > CONFIG_INET_XFRM_MODE_TUNNEL=y > CONFIG_INET_XFRM_MODE_BEET=y > # CONFIG_INET_LRO is not set > CONFIG_INET_DIAG=y > CONFIG_INET_TCP_DIAG=y > # CONFIG_TCP_CONG_ADVANCED is not set > CONFIG_TCP_CONG_CUBIC=y > CONFIG_DEFAULT_TCP_CONG="cubic" > # CONFIG_TCP_MD5SIG is not set > # CONFIG_IPV6 is not set > # CONFIG_NETLABEL is not set > # CONFIG_NETWORK_SECMARK is not set > # CONFIG_NETWORK_PHY_TIMESTAMPING is not set > CONFIG_NETFILTER=y > # CONFIG_NETFILTER_DEBUG is not set > CONFIG_NETFILTER_ADVANCED=y > > # > # Core Netfilter Configuration > # > # CONFIG_NETFILTER_NETLINK_QUEUE is not set > # CONFIG_NETFILTER_NETLINK_LOG is not set > # CONFIG_NF_CONNTRACK is not set > # CONFIG_NETFILTER_XTABLES is not set > # CONFIG_IP_VS is not set > > # > # IP: Netfilter Configuration > # > # CONFIG_NF_DEFRAG_IPV4 is not set > # CONFIG_IP_NF_QUEUE is not set > # CONFIG_IP_NF_IPTABLES is not set > # CONFIG_IP_NF_ARPTABLES is not set > # CONFIG_IP_DCCP is not set > # CONFIG_IP_SCTP is not set > # CONFIG_RDS is not set > # CONFIG_TIPC is not set > # CONFIG_ATM is not set > # CONFIG_L2TP is not set > # CONFIG_BRIDGE is not set > # CONFIG_NET_DSA is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_DECNET is not set > # CONFIG_LLC2 is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_PHONET is not set > # CONFIG_IEEE802154 is not set > # CONFIG_NET_SCHED is not set > # CONFIG_DCB is not set > CONFIG_DNS_RESOLVER=y > # CONFIG_BATMAN_ADV is not set > CONFIG_RPS=y > CONFIG_RFS_ACCEL=y > CONFIG_XPS=y > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > # CONFIG_NET_TCPPROBE is not set > # CONFIG_NET_DROP_MONITOR is not set > # CONFIG_HAMRADIO is not set > # CONFIG_CAN is not set > # CONFIG_IRDA is not set > CONFIG_BT=m > # CONFIG_BT_L2CAP is not set > # CONFIG_BT_SCO is not set > > # > # Bluetooth device drivers > # > # CONFIG_BT_HCIBTUSB is not set > # CONFIG_BT_HCIBTSDIO is not set > CONFIG_BT_HCIUART=m > CONFIG_BT_HCIUART_H4=y > CONFIG_BT_HCIUART_BCSP=y > # CONFIG_BT_HCIUART_ATH3K is not set > CONFIG_BT_HCIUART_LL=y > CONFIG_BT_HCIBCM203X=m > CONFIG_BT_HCIBPA10X=m > # CONFIG_BT_HCIBFUSB is not set > # CONFIG_BT_HCIVHCI is not set > # CONFIG_BT_MRVL is not set > # CONFIG_AF_RXRPC is not set > CONFIG_WIRELESS=y > CONFIG_WIRELESS_EXT=y > CONFIG_WEXT_CORE=y > CONFIG_WEXT_PROC=y > CONFIG_WEXT_SPY=y > CONFIG_CFG80211=m > # CONFIG_NL80211_TESTMODE is not set > # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set > # CONFIG_CFG80211_REG_DEBUG is not set > CONFIG_CFG80211_DEFAULT_PS=y > # CONFIG_CFG80211_DEBUGFS is not set > # CONFIG_CFG80211_INTERNAL_REGDB is not set > CONFIG_CFG80211_WEXT=y > CONFIG_WIRELESS_EXT_SYSFS=y > CONFIG_LIB80211=m > # CONFIG_LIB80211_DEBUG is not set > CONFIG_MAC80211=m > CONFIG_MAC80211_HAS_RC=y > CONFIG_MAC80211_RC_PID=y > CONFIG_MAC80211_RC_MINSTREL=y > CONFIG_MAC80211_RC_MINSTREL_HT=y > CONFIG_MAC80211_RC_DEFAULT_PID=y > # CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set > CONFIG_MAC80211_RC_DEFAULT="pid" > # CONFIG_MAC80211_MESH is not set > # CONFIG_MAC80211_DEBUGFS is not set > # CONFIG_MAC80211_DEBUG_MENU is not set > # CONFIG_WIMAX is not set > # CONFIG_RFKILL is not set > # CONFIG_NET_9P is not set > # CONFIG_CAIF is not set > # CONFIG_CEPH_LIB is not set > > # > # Device Drivers > # > > # > # Generic Driver Options > # > CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" > # CONFIG_DEVTMPFS is not set > CONFIG_STANDALONE=y > CONFIG_PREVENT_FIRMWARE_BUILD=y > CONFIG_FW_LOADER=y > CONFIG_FIRMWARE_IN_KERNEL=y > CONFIG_EXTRA_FIRMWARE="" > # CONFIG_SYS_HYPERVISOR is not set > CONFIG_CONNECTOR=y > CONFIG_PROC_EVENTS=y > CONFIG_MTD=y > # CONFIG_MTD_DEBUG is not set > # CONFIG_MTD_TESTS is not set > CONFIG_MTD_PARTITIONS=y > # CONFIG_MTD_REDBOOT_PARTS is not set > CONFIG_MTD_CMDLINE_PARTS=y > # CONFIG_MTD_AFS_PARTS is not set > # CONFIG_MTD_AR7_PARTS is not set > > # > # User Modules And Translation Layers > # > CONFIG_MTD_CHAR=y > CONFIG_MTD_BLKDEVS=y > CONFIG_MTD_BLOCK=y > # CONFIG_FTL is not set > # CONFIG_NFTL is not set > # CONFIG_INFTL is not set > # CONFIG_RFD_FTL is not set > # CONFIG_SSFDC is not set > # CONFIG_SM_FTL is not set > CONFIG_MTD_OOPS=y > # CONFIG_MTD_SWAP is not set > > # > # RAM/ROM/Flash chip drivers > # > CONFIG_MTD_CFI=y > # CONFIG_MTD_JEDECPROBE is not set > CONFIG_MTD_GEN_PROBE=y > # CONFIG_MTD_CFI_ADV_OPTIONS is not set > CONFIG_MTD_MAP_BANK_WIDTH_1=y > CONFIG_MTD_MAP_BANK_WIDTH_2=y > CONFIG_MTD_MAP_BANK_WIDTH_4=y > # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set > # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set > # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set > CONFIG_MTD_CFI_I1=y > CONFIG_MTD_CFI_I2=y > # CONFIG_MTD_CFI_I4 is not set > # CONFIG_MTD_CFI_I8 is not set > CONFIG_MTD_CFI_INTELEXT=y > # CONFIG_MTD_CFI_AMDSTD is not set > # CONFIG_MTD_CFI_STAA is not set > CONFIG_MTD_CFI_UTIL=y > # CONFIG_MTD_RAM is not set > # CONFIG_MTD_ROM is not set > # CONFIG_MTD_ABSENT is not set > > # > # Mapping drivers for chip access > # > # CONFIG_MTD_COMPLEX_MAPPINGS is not set > # CONFIG_MTD_PHYSMAP is not set > # CONFIG_MTD_ARM_INTEGRATOR is not set > # CONFIG_MTD_PLATRAM is not set > > # > # Self-contained MTD device drivers > # > # CONFIG_MTD_DATAFLASH is not set > # CONFIG_MTD_M25P80 is not set > # CONFIG_MTD_SST25L is not set > # CONFIG_MTD_SLRAM is not set > # CONFIG_MTD_PHRAM is not set > # CONFIG_MTD_MTDRAM is not set > # CONFIG_MTD_BLOCK2MTD is not set > > # > # Disk-On-Chip Device Drivers > # > # CONFIG_MTD_DOC2000 is not set > # CONFIG_MTD_DOC2001 is not set > # CONFIG_MTD_DOC2001PLUS is not set > CONFIG_MTD_NAND_ECC=y > # CONFIG_MTD_NAND_ECC_SMC is not set > CONFIG_MTD_NAND=y > # CONFIG_MTD_NAND_VERIFY_WRITE is not set > # CONFIG_MTD_NAND_ECC_BCH is not set > # CONFIG_MTD_SM_COMMON is not set > # CONFIG_MTD_NAND_MUSEUM_IDS is not set > # CONFIG_MTD_NAND_GPIO is not set > CONFIG_MTD_NAND_OMAP2=y > CONFIG_MTD_NAND_IDS=y > # CONFIG_MTD_NAND_DISKONCHIP is not set > # CONFIG_MTD_NAND_NANDSIM is not set > # CONFIG_MTD_NAND_PLATFORM is not set > # CONFIG_MTD_ALAUDA is not set > CONFIG_MTD_ONENAND=y > CONFIG_MTD_ONENAND_VERIFY_WRITE=y > # CONFIG_MTD_ONENAND_GENERIC is not set > CONFIG_MTD_ONENAND_OMAP2=y > # CONFIG_MTD_ONENAND_OTP is not set > # CONFIG_MTD_ONENAND_2X_PROGRAM is not set > # CONFIG_MTD_ONENAND_SIM is not set > > # > # LPDDR flash memory drivers > # > # CONFIG_MTD_LPDDR is not set > CONFIG_MTD_UBI=y > CONFIG_MTD_UBI_WL_THRESHOLD=4096 > CONFIG_MTD_UBI_BEB_RESERVE=1 > # CONFIG_MTD_UBI_GLUEBI is not set > # CONFIG_MTD_UBI_DEBUG is not set > # CONFIG_PARPORT is not set > CONFIG_BLK_DEV=y > # CONFIG_BLK_DEV_COW_COMMON is not set > CONFIG_BLK_DEV_LOOP=y > # CONFIG_BLK_DEV_CRYPTOLOOP is not set > # CONFIG_BLK_DEV_DRBD is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_UB is not set > CONFIG_BLK_DEV_RAM=y > CONFIG_BLK_DEV_RAM_COUNT=16 > CONFIG_BLK_DEV_RAM_SIZE=16384 > # CONFIG_BLK_DEV_XIP is not set > # CONFIG_CDROM_PKTCDVD is not set > # CONFIG_ATA_OVER_ETH is not set > # CONFIG_MG_DISK is not set > # CONFIG_BLK_DEV_RBD is not set > # CONFIG_SENSORS_LIS3LV02D is not set > # CONFIG_MISC_DEVICES is not set > CONFIG_HAVE_IDE=y > # CONFIG_IDE is not set > > # > # SCSI device support > # > CONFIG_SCSI_MOD=y > # CONFIG_RAID_ATTRS is not set > CONFIG_SCSI=y > CONFIG_SCSI_DMA=y > # CONFIG_SCSI_TGT is not set > # CONFIG_SCSI_NETLINK is not set > CONFIG_SCSI_PROC_FS=y > > # > # SCSI support type (disk, tape, CD-ROM) > # > CONFIG_BLK_DEV_SD=y > # CONFIG_CHR_DEV_ST is not set > # CONFIG_CHR_DEV_OSST is not set > # CONFIG_BLK_DEV_SR is not set > # CONFIG_CHR_DEV_SG is not set > # CONFIG_CHR_DEV_SCH is not set > CONFIG_SCSI_MULTI_LUN=y > # CONFIG_SCSI_CONSTANTS is not set > # CONFIG_SCSI_LOGGING is not set > CONFIG_SCSI_SCAN_ASYNC=y > CONFIG_SCSI_WAIT_SCAN=m > > # > # SCSI Transports > # > # CONFIG_SCSI_SPI_ATTRS is not set > # CONFIG_SCSI_FC_ATTRS is not set > # CONFIG_SCSI_ISCSI_ATTRS is not set > # CONFIG_SCSI_SAS_ATTRS is not set > # CONFIG_SCSI_SAS_LIBSAS is not set > # CONFIG_SCSI_SRP_ATTRS is not set > CONFIG_SCSI_LOWLEVEL=y > # CONFIG_ISCSI_TCP is not set > # CONFIG_ISCSI_BOOT_SYSFS is not set > # CONFIG_LIBFC is not set > # CONFIG_LIBFCOE is not set > # CONFIG_SCSI_DEBUG is not set > # CONFIG_SCSI_DH is not set > # CONFIG_SCSI_OSD_INITIATOR is not set > # CONFIG_ATA is not set > CONFIG_MD=y > # CONFIG_BLK_DEV_MD is not set > # CONFIG_BLK_DEV_DM is not set > # CONFIG_TARGET_CORE is not set > CONFIG_NETDEVICES=y > # CONFIG_DUMMY is not set > # CONFIG_BONDING is not set > # CONFIG_MACVLAN is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > # CONFIG_VETH is not set > CONFIG_MII=y > CONFIG_PHYLIB=y > > # > # MII PHY device drivers > # > # CONFIG_MARVELL_PHY is not set > # CONFIG_DAVICOM_PHY is not set > # CONFIG_QSEMI_PHY is not set > # CONFIG_LXT_PHY is not set > # CONFIG_CICADA_PHY is not set > # CONFIG_VITESSE_PHY is not set > CONFIG_SMSC_PHY=y > # CONFIG_BROADCOM_PHY is not set > # CONFIG_BCM63XX_PHY is not set > # CONFIG_ICPLUS_PHY is not set > # CONFIG_REALTEK_PHY is not set > # CONFIG_NATIONAL_PHY is not set > # CONFIG_STE10XP is not set > # CONFIG_LSI_ET1011C_PHY is not set > # CONFIG_MICREL_PHY is not set > # CONFIG_FIXED_PHY is not set > # CONFIG_MDIO_BITBANG is not set > CONFIG_NET_ETHERNET=y > # CONFIG_AX88796 is not set > CONFIG_SMC91X=y > # CONFIG_TI_DAVINCI_EMAC is not set > # CONFIG_TI_DAVINCI_MDIO is not set > # CONFIG_TI_DAVINCI_CPDMA is not set > # CONFIG_DM9000 is not set > # CONFIG_ENC28J60 is not set > # CONFIG_ETHOC is not set > # CONFIG_SMC911X is not set > CONFIG_SMSC911X=y > # CONFIG_SMSC911X_ARCH_HOOKS is not set > # CONFIG_DNET is not set > # CONFIG_IBM_NEW_EMAC_ZMII is not set > # CONFIG_IBM_NEW_EMAC_RGMII is not set > # CONFIG_IBM_NEW_EMAC_TAH is not set > # CONFIG_IBM_NEW_EMAC_EMAC4 is not set > # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set > # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set > # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set > # CONFIG_B44 is not set > CONFIG_KS8851=y > CONFIG_KS8851_MLL=y > # CONFIG_FTMAC100 is not set > CONFIG_NETDEV_1000=y > # CONFIG_STMMAC_ETH is not set > CONFIG_NETDEV_10000=y > CONFIG_WLAN=y > # CONFIG_LIBERTAS_THINFIRM is not set > # CONFIG_AT76C50X_USB is not set > # CONFIG_USB_ZD1201 is not set > # CONFIG_USB_NET_RNDIS_WLAN is not set > # CONFIG_RTL8187 is not set > # CONFIG_MAC80211_HWSIM is not set > # CONFIG_ATH_COMMON is not set > # CONFIG_B43 is not set > # CONFIG_B43LEGACY is not set > # CONFIG_HOSTAP is not set > # CONFIG_IWM is not set > CONFIG_LIBERTAS=m > CONFIG_LIBERTAS_USB=m > CONFIG_LIBERTAS_SDIO=m > # CONFIG_LIBERTAS_SPI is not set > CONFIG_LIBERTAS_DEBUG=y > # CONFIG_LIBERTAS_MESH is not set > # CONFIG_P54_COMMON is not set > # CONFIG_RT2X00 is not set > # CONFIG_RTL8192CU is not set > # CONFIG_WL1251 is not set > # CONFIG_WL12XX_MENU is not set > # CONFIG_ZD1211RW is not set > > # > # Enable WiMAX (Networking options) to see the WiMAX drivers > # > > # > # USB Network Adapters > # > # CONFIG_USB_CATC is not set > # CONFIG_USB_KAWETH is not set > # CONFIG_USB_PEGASUS is not set > # CONFIG_USB_RTL8150 is not set > CONFIG_USB_USBNET=y > CONFIG_USB_NET_AX8817X=y > CONFIG_USB_NET_CDCETHER=y > # CONFIG_USB_NET_CDC_EEM is not set > CONFIG_USB_NET_CDC_NCM=y > # CONFIG_USB_NET_DM9601 is not set > # CONFIG_USB_NET_SMSC75XX is not set > CONFIG_USB_NET_SMSC95XX=y > # CONFIG_USB_NET_GL620A is not set > # CONFIG_USB_NET_NET1080 is not set > # CONFIG_USB_NET_PLUSB is not set > # CONFIG_USB_NET_MCS7830 is not set > # CONFIG_USB_NET_RNDIS_HOST is not set > # CONFIG_USB_NET_CDC_SUBSET is not set > # CONFIG_USB_NET_ZAURUS is not set > # CONFIG_USB_NET_CX82310_ETH is not set > # CONFIG_USB_NET_INT51X1 is not set > # CONFIG_USB_IPHETH is not set > # CONFIG_USB_SIERRA_NET is not set > # CONFIG_USB_VL600 is not set > # CONFIG_WAN is not set > > # > # CAIF transport drivers > # > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > # CONFIG_NETCONSOLE is not set > # CONFIG_NETPOLL is not set > # CONFIG_NET_POLL_CONTROLLER is not set > # CONFIG_ISDN is not set > # CONFIG_PHONE is not set > > # > # Input device support > # > CONFIG_INPUT=y > # CONFIG_INPUT_FF_MEMLESS is not set > # CONFIG_INPUT_POLLDEV is not set > # CONFIG_INPUT_SPARSEKMAP is not set > > # > # Userland interfaces > # > CONFIG_INPUT_MOUSEDEV=y > CONFIG_INPUT_MOUSEDEV_PSAUX=y > CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 > CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 > CONFIG_INPUT_JOYDEV=y > CONFIG_INPUT_EVDEV=y > # CONFIG_INPUT_EVBUG is not set > > # > # Input Device Drivers > # > CONFIG_INPUT_KEYBOARD=y > # CONFIG_KEYBOARD_ADP5588 is not set > CONFIG_KEYBOARD_ATKBD=y > # CONFIG_KEYBOARD_QT1070 is not set > # CONFIG_KEYBOARD_QT2160 is not set > # CONFIG_KEYBOARD_LKKBD is not set > CONFIG_KEYBOARD_GPIO=y > # CONFIG_KEYBOARD_TCA6416 is not set > # CONFIG_KEYBOARD_MATRIX is not set > # CONFIG_KEYBOARD_MAX7359 is not set > # CONFIG_KEYBOARD_MCS is not set > # CONFIG_KEYBOARD_NEWTON is not set > # CONFIG_KEYBOARD_OPENCORES is not set > # CONFIG_KEYBOARD_STOWAWAY is not set > # CONFIG_KEYBOARD_SUNKBD is not set > # CONFIG_KEYBOARD_OMAP is not set > # CONFIG_KEYBOARD_OMAP4 is not set > CONFIG_KEYBOARD_TWL4030=y > # CONFIG_KEYBOARD_XTKBD is not set > CONFIG_INPUT_MOUSE=y > CONFIG_MOUSE_PS2=y > CONFIG_MOUSE_PS2_ALPS=y > CONFIG_MOUSE_PS2_LOGIPS2PP=y > CONFIG_MOUSE_PS2_SYNAPTICS=y > CONFIG_MOUSE_PS2_TRACKPOINT=y > # CONFIG_MOUSE_PS2_ELANTECH is not set > # CONFIG_MOUSE_PS2_SENTELIC is not set > # CONFIG_MOUSE_PS2_TOUCHKIT is not set > # CONFIG_MOUSE_SERIAL is not set > # CONFIG_MOUSE_APPLETOUCH is not set > # CONFIG_MOUSE_BCM5974 is not set > # CONFIG_MOUSE_VSXXXAA is not set > # CONFIG_MOUSE_GPIO is not set > # CONFIG_MOUSE_SYNAPTICS_I2C is not set > # CONFIG_INPUT_JOYSTICK is not set > # CONFIG_INPUT_TABLET is not set > CONFIG_INPUT_TOUCHSCREEN=y > CONFIG_TOUCHSCREEN_ADS7846=y > # CONFIG_TOUCHSCREEN_AD7877 is not set > # CONFIG_TOUCHSCREEN_AD7879 is not set > # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set > # CONFIG_TOUCHSCREEN_BU21013 is not set > # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set > # CONFIG_TOUCHSCREEN_DYNAPRO is not set > # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set > # CONFIG_TOUCHSCREEN_EETI is not set > # CONFIG_TOUCHSCREEN_FUJITSU is not set > # CONFIG_TOUCHSCREEN_GUNZE is not set > # CONFIG_TOUCHSCREEN_ELO is not set > # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set > # CONFIG_TOUCHSCREEN_MCS5000 is not set > # CONFIG_TOUCHSCREEN_MTOUCH is not set > # CONFIG_TOUCHSCREEN_INEXIO is not set > # CONFIG_TOUCHSCREEN_MK712 is not set > # CONFIG_TOUCHSCREEN_PENMOUNT is not set > # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set > # CONFIG_TOUCHSCREEN_TOUCHWIN is not set > # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set > # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set > # CONFIG_TOUCHSCREEN_TSC2005 is not set > # CONFIG_TOUCHSCREEN_TSC2007 is not set > # CONFIG_TOUCHSCREEN_W90X900 is not set > # CONFIG_TOUCHSCREEN_ST1232 is not set > # CONFIG_TOUCHSCREEN_TPS6507X is not set > CONFIG_INPUT_MISC=y > # CONFIG_INPUT_AD714X is not set > # CONFIG_INPUT_ATI_REMOTE is not set > # CONFIG_INPUT_ATI_REMOTE2 is not set > # CONFIG_INPUT_KEYSPAN_REMOTE is not set > # CONFIG_INPUT_POWERMATE is not set > # CONFIG_INPUT_YEALINK is not set > # CONFIG_INPUT_CM109 is not set > CONFIG_INPUT_TWL4030_PWRBUTTON=y > # CONFIG_INPUT_TWL4030_VIBRA is not set > # CONFIG_INPUT_UINPUT is not set > # CONFIG_INPUT_PCF8574 is not set > # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set > # CONFIG_INPUT_ADXL34X is not set > # CONFIG_INPUT_CMA3000 is not set > > # > # Hardware I/O ports > # > CONFIG_SERIO=y > CONFIG_SERIO_SERPORT=y > CONFIG_SERIO_LIBPS2=y > # CONFIG_SERIO_RAW is not set > # CONFIG_SERIO_ALTERA_PS2 is not set > # CONFIG_SERIO_PS2MULT is not set > # CONFIG_GAMEPORT is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_CONSOLE_TRANSLATIONS=y > CONFIG_VT_CONSOLE=y > CONFIG_HW_CONSOLE=y > CONFIG_VT_HW_CONSOLE_BINDING=y > CONFIG_UNIX98_PTYS=y > # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set > # CONFIG_LEGACY_PTYS is not set > # CONFIG_SERIAL_NONSTANDARD is not set > # CONFIG_N_GSM is not set > CONFIG_DEVKMEM=y > > # > # Serial drivers > # > CONFIG_SERIAL_8250=y > CONFIG_SERIAL_8250_CONSOLE=y > CONFIG_SERIAL_8250_NR_UARTS=32 > CONFIG_SERIAL_8250_RUNTIME_UARTS=4 > CONFIG_SERIAL_8250_EXTENDED=y > CONFIG_SERIAL_8250_MANY_PORTS=y > CONFIG_SERIAL_8250_SHARE_IRQ=y > CONFIG_SERIAL_8250_DETECT_IRQ=y > CONFIG_SERIAL_8250_RSA=y > > # > # Non-8250 serial port support > # > # CONFIG_SERIAL_MAX3100 is not set > # CONFIG_SERIAL_MAX3107 is not set > CONFIG_SERIAL_CORE=y > CONFIG_SERIAL_CORE_CONSOLE=y > CONFIG_SERIAL_OMAP=y > CONFIG_SERIAL_OMAP_CONSOLE=y > # CONFIG_SERIAL_TIMBERDALE is not set > # CONFIG_SERIAL_ALTERA_JTAGUART is not set > # CONFIG_SERIAL_ALTERA_UART is not set > # CONFIG_SERIAL_IFX6X60 is not set > # CONFIG_TTY_PRINTK is not set > # CONFIG_HVC_DCC is not set > # CONFIG_IPMI_HANDLER is not set > CONFIG_HW_RANDOM=y > # CONFIG_HW_RANDOM_TIMERIOMEM is not set > CONFIG_HW_RANDOM_OMAP=y > # CONFIG_R3964 is not set > # CONFIG_RAW_DRIVER is not set > # CONFIG_TCG_TPM is not set > # CONFIG_RAMOOPS is not set > CONFIG_I2C=y > CONFIG_I2C_BOARDINFO=y > CONFIG_I2C_COMPAT=y > CONFIG_I2C_CHARDEV=y > # CONFIG_I2C_MUX is not set > CONFIG_I2C_HELPER_AUTO=y > > # > # I2C Hardware Bus support > # > > # > # I2C system bus drivers (mostly embedded / system-on-chip) > # > # CONFIG_I2C_DESIGNWARE is not set > # CONFIG_I2C_GPIO is not set > # CONFIG_I2C_OCORES is not set > CONFIG_I2C_OMAP=y > # CONFIG_I2C_PCA_PLATFORM is not set > # CONFIG_I2C_PXA_PCI is not set > # CONFIG_I2C_SIMTEC is not set > # CONFIG_I2C_XILINX is not set > > # > # External I2C/SMBus adapter drivers > # > # CONFIG_I2C_DIOLAN_U2C is not set > # CONFIG_I2C_PARPORT_LIGHT is not set > # CONFIG_I2C_TAOS_EVM is not set > # CONFIG_I2C_TINY_USB is not set > > # > # Other I2C/SMBus bus drivers > # > # CONFIG_I2C_STUB is not set > # CONFIG_I2C_DEBUG_CORE is not set > # CONFIG_I2C_DEBUG_ALGO is not set > # CONFIG_I2C_DEBUG_BUS is not set > CONFIG_SPI=y > CONFIG_SPI_MASTER=y > > # > # SPI Master Controller Drivers > # > # CONFIG_SPI_ALTERA is not set > # CONFIG_SPI_BITBANG is not set > # CONFIG_SPI_GPIO is not set > # CONFIG_SPI_OC_TINY is not set > CONFIG_SPI_OMAP24XX=y > # CONFIG_SPI_PXA2XX_PCI is not set > # CONFIG_SPI_XILINX is not set > # CONFIG_SPI_DESIGNWARE is not set > > # > # SPI Protocol Masters > # > # CONFIG_SPI_SPIDEV is not set > # CONFIG_SPI_TLE62X0 is not set > > # > # PPS support > # > # CONFIG_PPS is not set > > # > # PPS generators support > # > CONFIG_ARCH_REQUIRE_GPIOLIB=y > CONFIG_GPIOLIB=y > CONFIG_GPIO_SYSFS=y > > # > # Memory mapped GPIO expanders: > # > # CONFIG_GPIO_BASIC_MMIO is not set > # CONFIG_GPIO_IT8761E is not set > > # > # I2C GPIO expanders: > # > # CONFIG_GPIO_MAX7300 is not set > # CONFIG_GPIO_MAX732X is not set > # CONFIG_GPIO_PCF857X is not set > # CONFIG_GPIO_SX150X is not set > CONFIG_GPIO_TWL4030=y > # CONFIG_GPIO_ADP5588 is not set > > # > # PCI GPIO expanders: > # > > # > # SPI GPIO expanders: > # > # CONFIG_GPIO_MAX7301 is not set > # CONFIG_GPIO_MCP23S08 is not set > # CONFIG_GPIO_MC33880 is not set > # CONFIG_GPIO_74X164 is not set > > # > # AC97 GPIO expanders: > # > > # > # MODULbus GPIO expanders: > # > CONFIG_W1=y > CONFIG_W1_CON=y > > # > # 1-wire Bus Masters > # > # CONFIG_W1_MASTER_DS2490 is not set > # CONFIG_W1_MASTER_DS2482 is not set > # CONFIG_W1_MASTER_DS1WM is not set > # CONFIG_W1_MASTER_GPIO is not set > # CONFIG_HDQ_MASTER_OMAP is not set > > # > # 1-wire Slaves > # > # CONFIG_W1_SLAVE_THERM is not set > # CONFIG_W1_SLAVE_SMEM is not set > # CONFIG_W1_SLAVE_DS2423 is not set > # CONFIG_W1_SLAVE_DS2431 is not set > # CONFIG_W1_SLAVE_DS2433 is not set > # CONFIG_W1_SLAVE_DS2760 is not set > # CONFIG_W1_SLAVE_BQ27000 is not set > CONFIG_POWER_SUPPLY=y > # CONFIG_POWER_SUPPLY_DEBUG is not set > # CONFIG_PDA_POWER is not set > # CONFIG_TEST_POWER is not set > # CONFIG_BATTERY_DS2782 is not set > # CONFIG_BATTERY_BQ20Z75 is not set > # CONFIG_BATTERY_BQ27x00 is not set > # CONFIG_BATTERY_MAX17040 is not set > # CONFIG_BATTERY_MAX17042 is not set > # CONFIG_CHARGER_ISP1704 is not set > # CONFIG_CHARGER_TWL4030 is not set > # CONFIG_CHARGER_GPIO is not set > CONFIG_HWMON=y > # CONFIG_HWMON_VID is not set > # CONFIG_HWMON_DEBUG_CHIP is not set > > # > # Native drivers > # > # CONFIG_SENSORS_AD7414 is not set > # CONFIG_SENSORS_AD7418 is not set > # CONFIG_SENSORS_ADCXX is not set > # CONFIG_SENSORS_ADM1021 is not set > # CONFIG_SENSORS_ADM1025 is not set > # CONFIG_SENSORS_ADM1026 is not set > # CONFIG_SENSORS_ADM1029 is not set > # CONFIG_SENSORS_ADM1031 is not set > # CONFIG_SENSORS_ADM9240 is not set > # CONFIG_SENSORS_ADT7411 is not set > # CONFIG_SENSORS_ADT7462 is not set > # CONFIG_SENSORS_ADT7470 is not set > # CONFIG_SENSORS_ADT7475 is not set > # CONFIG_SENSORS_ASC7621 is not set > # CONFIG_SENSORS_ATXP1 is not set > # CONFIG_SENSORS_DS620 is not set > # CONFIG_SENSORS_DS1621 is not set > # CONFIG_SENSORS_F71805F is not set > # CONFIG_SENSORS_F71882FG is not set > # CONFIG_SENSORS_F75375S is not set > # CONFIG_SENSORS_G760A is not set > # CONFIG_SENSORS_GL518SM is not set > # CONFIG_SENSORS_GL520SM is not set > # CONFIG_SENSORS_GPIO_FAN is not set > # CONFIG_SENSORS_IT87 is not set > # CONFIG_SENSORS_JC42 is not set > # CONFIG_SENSORS_LINEAGE is not set > # CONFIG_SENSORS_LM63 is not set > # CONFIG_SENSORS_LM70 is not set > # CONFIG_SENSORS_LM73 is not set > # CONFIG_SENSORS_LM75 is not set > # CONFIG_SENSORS_LM77 is not set > # CONFIG_SENSORS_LM78 is not set > # CONFIG_SENSORS_LM80 is not set > # CONFIG_SENSORS_LM83 is not set > # CONFIG_SENSORS_LM85 is not set > # CONFIG_SENSORS_LM87 is not set > # CONFIG_SENSORS_LM90 is not set > # CONFIG_SENSORS_LM92 is not set > # CONFIG_SENSORS_LM93 is not set > # CONFIG_SENSORS_LTC4151 is not set > # CONFIG_SENSORS_LTC4215 is not set > # CONFIG_SENSORS_LTC4245 is not set > # CONFIG_SENSORS_LTC4261 is not set > # CONFIG_SENSORS_LM95241 is not set > # CONFIG_SENSORS_MAX1111 is not set > # CONFIG_SENSORS_MAX1619 is not set > # CONFIG_SENSORS_MAX6639 is not set > # CONFIG_SENSORS_MAX6650 is not set > # CONFIG_SENSORS_PC87360 is not set > # CONFIG_SENSORS_PC87427 is not set > # CONFIG_SENSORS_PCF8591 is not set > # CONFIG_PMBUS is not set > # CONFIG_SENSORS_SHT15 is not set > # CONFIG_SENSORS_SHT21 is not set > # CONFIG_SENSORS_SMM665 is not set > # CONFIG_SENSORS_DME1737 is not set > # CONFIG_SENSORS_EMC1403 is not set > # CONFIG_SENSORS_EMC2103 is not set > # CONFIG_SENSORS_SMSC47M1 is not set > # CONFIG_SENSORS_SMSC47M192 is not set > # CONFIG_SENSORS_SMSC47B397 is not set > # CONFIG_SENSORS_SCH5627 is not set > # CONFIG_SENSORS_ADS1015 is not set > # CONFIG_SENSORS_ADS7828 is not set > # CONFIG_SENSORS_ADS7871 is not set > # CONFIG_SENSORS_AMC6821 is not set > # CONFIG_SENSORS_THMC50 is not set > # CONFIG_SENSORS_TMP102 is not set > # CONFIG_SENSORS_TMP401 is not set > # CONFIG_SENSORS_TMP421 is not set > # CONFIG_SENSORS_VT1211 is not set > # CONFIG_SENSORS_W83781D is not set > # CONFIG_SENSORS_W83791D is not set > # CONFIG_SENSORS_W83792D is not set > # CONFIG_SENSORS_W83793 is not set > # CONFIG_SENSORS_W83795 is not set > # CONFIG_SENSORS_W83L785TS is not set > # CONFIG_SENSORS_W83L786NG is not set > # CONFIG_SENSORS_W83627HF is not set > # CONFIG_SENSORS_W83627EHF is not set > # CONFIG_THERMAL is not set > CONFIG_WATCHDOG=y > # CONFIG_WATCHDOG_NOWAYOUT is not set > > # > # Watchdog Device Drivers > # > # CONFIG_SOFT_WATCHDOG is not set > # CONFIG_MPCORE_WATCHDOG is not set > CONFIG_OMAP_WATCHDOG=y > CONFIG_TWL4030_WATCHDOG=y > # CONFIG_MAX63XX_WATCHDOG is not set > > # > # USB-based Watchdog Cards > # > # CONFIG_USBPCWATCHDOG is not set > CONFIG_SSB_POSSIBLE=y > > # > # Sonics Silicon Backplane > # > # CONFIG_SSB is not set > CONFIG_MFD_SUPPORT=y > # CONFIG_MFD_CORE is not set > # CONFIG_MFD_88PM860X is not set > # CONFIG_MFD_SM501 is not set > # CONFIG_MFD_ASIC3 is not set > # CONFIG_HTC_EGPIO is not set > # CONFIG_HTC_PASIC3 is not set > # CONFIG_HTC_I2CPLD is not set > # CONFIG_TPS6105X is not set > # CONFIG_TPS65010 is not set > # CONFIG_TPS6507X is not set > CONFIG_MENELAUS=y > CONFIG_TWL4030_CORE=y > # CONFIG_TWL4030_MADC is not set > CONFIG_TWL4030_POWER=y > # CONFIG_TWL4030_CODEC is not set > # CONFIG_TWL6030_PWM is not set > # CONFIG_MFD_STMPE is not set > # CONFIG_MFD_TC3589X is not set > # CONFIG_MFD_TMIO is not set > # CONFIG_MFD_T7L66XB is not set > # CONFIG_MFD_TC6387XB is not set > # CONFIG_MFD_TC6393XB is not set > # CONFIG_PMIC_DA903X is not set > # CONFIG_PMIC_ADP5520 is not set > # CONFIG_MFD_MAX8925 is not set > # CONFIG_MFD_MAX8997 is not set > # CONFIG_MFD_MAX8998 is not set > # CONFIG_MFD_WM8400 is not set > # CONFIG_MFD_WM831X_I2C is not set > # CONFIG_MFD_WM831X_SPI is not set > # CONFIG_MFD_WM8350_I2C is not set > # CONFIG_MFD_WM8994 is not set > # CONFIG_MFD_PCF50633 is not set > # CONFIG_MFD_MC13XXX is not set > # CONFIG_ABX500_CORE is not set > # CONFIG_EZX_PCAP is not set > # CONFIG_MFD_TPS6586X is not set > # CONFIG_MFD_WL1273_CORE is not set > CONFIG_MFD_OMAP_USB_HOST=y > CONFIG_REGULATOR=y > # CONFIG_REGULATOR_DEBUG is not set > # CONFIG_REGULATOR_DUMMY is not set > CONFIG_REGULATOR_FIXED_VOLTAGE=y > # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set > # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set > # CONFIG_REGULATOR_BQ24022 is not set > # CONFIG_REGULATOR_MAX1586 is not set > # CONFIG_REGULATOR_MAX8649 is not set > # CONFIG_REGULATOR_MAX8660 is not set > # CONFIG_REGULATOR_MAX8952 is not set > CONFIG_REGULATOR_TWL4030=y > # CONFIG_REGULATOR_LP3971 is not set > # CONFIG_REGULATOR_LP3972 is not set > CONFIG_REGULATOR_TPS65023=y > CONFIG_REGULATOR_TPS6507X=y > # CONFIG_REGULATOR_ISL6271A is not set > # CONFIG_REGULATOR_AD5398 is not set > # CONFIG_REGULATOR_TPS6524X is not set > CONFIG_MEDIA_SUPPORT=y > > # > # Multimedia core support > # > CONFIG_MEDIA_CONTROLLER=y > CONFIG_VIDEO_DEV=y > CONFIG_VIDEO_V4L2_COMMON=y > CONFIG_VIDEO_V4L2_SUBDEV_API=y > # CONFIG_DVB_CORE is not set > CONFIG_VIDEO_MEDIA=y > > # > # Multimedia drivers > # > CONFIG_RC_CORE=y > CONFIG_LIRC=y > CONFIG_RC_MAP=y > CONFIG_IR_NEC_DECODER=y > CONFIG_IR_RC5_DECODER=y > CONFIG_IR_RC6_DECODER=y > CONFIG_IR_JVC_DECODER=y > CONFIG_IR_SONY_DECODER=y > CONFIG_IR_RC5_SZ_DECODER=y > CONFIG_IR_LIRC_CODEC=y > # CONFIG_IR_IMON is not set > # CONFIG_IR_MCEUSB is not set > # CONFIG_IR_STREAMZAP is not set > # CONFIG_RC_LOOPBACK is not set > # CONFIG_MEDIA_ATTACH is not set > CONFIG_MEDIA_TUNER=y > CONFIG_MEDIA_TUNER_CUSTOMISE=y > > # > # Customize TV tuners > # > CONFIG_MEDIA_TUNER_SIMPLE=m > CONFIG_MEDIA_TUNER_TDA8290=m > CONFIG_MEDIA_TUNER_TDA827X=m > CONFIG_MEDIA_TUNER_TDA18271=m > CONFIG_MEDIA_TUNER_TDA9887=m > CONFIG_MEDIA_TUNER_TEA5761=m > CONFIG_MEDIA_TUNER_TEA5767=m > CONFIG_MEDIA_TUNER_MT20XX=m > CONFIG_MEDIA_TUNER_MT2060=m > CONFIG_MEDIA_TUNER_MT2266=m > CONFIG_MEDIA_TUNER_MT2131=m > CONFIG_MEDIA_TUNER_QT1010=m > CONFIG_MEDIA_TUNER_XC2028=m > CONFIG_MEDIA_TUNER_XC5000=m > CONFIG_MEDIA_TUNER_MXL5005S=m > CONFIG_MEDIA_TUNER_MXL5007T=m > CONFIG_MEDIA_TUNER_MC44S803=m > CONFIG_MEDIA_TUNER_MAX2165=m > CONFIG_MEDIA_TUNER_TDA18218=m > CONFIG_VIDEO_V4L2=y > CONFIG_VIDEOBUF_GEN=y > CONFIG_VIDEOBUF_DMA_CONTIG=y > CONFIG_VIDEO_CAPTURE_DRIVERS=y > # CONFIG_VIDEO_ADV_DEBUG is not set > # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set > # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set > # CONFIG_VIDEO_IR_I2C is not set > > # > # Encoders/decoders and other helper chips > # > > # > # Audio decoders > # > # CONFIG_VIDEO_TVAUDIO is not set > # CONFIG_VIDEO_TDA7432 is not set > # CONFIG_VIDEO_TDA9840 is not set > # CONFIG_VIDEO_TEA6415C is not set > # CONFIG_VIDEO_TEA6420 is not set > # CONFIG_VIDEO_MSP3400 is not set > # CONFIG_VIDEO_CS5345 is not set > # CONFIG_VIDEO_CS53L32A is not set > # CONFIG_VIDEO_M52790 is not set > # CONFIG_VIDEO_TLV320AIC23B is not set > # CONFIG_VIDEO_WM8775 is not set > # CONFIG_VIDEO_WM8739 is not set > # CONFIG_VIDEO_VP27SMPX is not set > > # > # RDS decoders > # > # CONFIG_VIDEO_SAA6588 is not set > > # > # Video decoders > # > # CONFIG_VIDEO_ADV7180 is not set > # CONFIG_VIDEO_BT819 is not set > # CONFIG_VIDEO_BT856 is not set > # CONFIG_VIDEO_BT866 is not set > # CONFIG_VIDEO_KS0127 is not set > # CONFIG_VIDEO_OV7670 is not set > CONFIG_VIDEO_MT9P031=y > # CONFIG_VIDEO_MT9V011 is not set > # CONFIG_VIDEO_TCM825X is not set > # CONFIG_VIDEO_SAA7110 is not set > # CONFIG_VIDEO_SAA711X is not set > # CONFIG_VIDEO_SAA717X is not set > # CONFIG_VIDEO_SAA7191 is not set > # CONFIG_VIDEO_TVP514X is not set > # CONFIG_VIDEO_TVP5150 is not set > # CONFIG_VIDEO_TVP7002 is not set > # CONFIG_VIDEO_VPX3220 is not set > > # > # Video and audio decoders > # > # CONFIG_VIDEO_CX25840 is not set > > # > # MPEG video encoders > # > # CONFIG_VIDEO_CX2341X is not set > > # > # Video encoders > # > # CONFIG_VIDEO_SAA7127 is not set > # CONFIG_VIDEO_SAA7185 is not set > # CONFIG_VIDEO_ADV7170 is not set > # CONFIG_VIDEO_ADV7175 is not set > # CONFIG_VIDEO_THS7303 is not set > # CONFIG_VIDEO_ADV7343 is not set > # CONFIG_VIDEO_AK881X is not set > > # > # Video improvement chips > # > # CONFIG_VIDEO_UPD64031A is not set > # CONFIG_VIDEO_UPD64083 is not set > # CONFIG_VIDEO_VIVI is not set > # CONFIG_VIDEO_VPFE_CAPTURE is not set > CONFIG_VIDEO_OMAP2_VOUT=y > # CONFIG_VIDEO_CPIA2 is not set > # CONFIG_VIDEO_TIMBERDALE is not set > # CONFIG_VIDEO_SR030PC30 is not set > # CONFIG_VIDEO_NOON010PC30 is not set > CONFIG_VIDEO_OMAP3=y > CONFIG_VIDEO_OMAP3_DEBUG=y > # CONFIG_SOC_CAMERA is not set > # CONFIG_VIDEO_OMAP2 is not set > # CONFIG_V4L_USB_DRIVERS is not set > # CONFIG_V4L_MEM2MEM_DRIVERS is not set > # CONFIG_RADIO_ADAPTERS is not set > > # > # Graphics support > # > # CONFIG_DRM is not set > # CONFIG_VGASTATE is not set > # CONFIG_VIDEO_OUTPUT_CONTROL is not set > CONFIG_FB=y > CONFIG_FIRMWARE_EDID=y > # CONFIG_FB_DDC is not set > # CONFIG_FB_BOOT_VESA_SUPPORT is not set > CONFIG_FB_CFB_FILLRECT=m > CONFIG_FB_CFB_COPYAREA=m > CONFIG_FB_CFB_IMAGEBLIT=m > # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set > # CONFIG_FB_SYS_FILLRECT is not set > # CONFIG_FB_SYS_COPYAREA is not set > # CONFIG_FB_SYS_IMAGEBLIT is not set > # CONFIG_FB_FOREIGN_ENDIAN is not set > # CONFIG_FB_SYS_FOPS is not set > # CONFIG_FB_WMT_GE_ROPS is not set > # CONFIG_FB_SVGALIB is not set > # CONFIG_FB_MACMODES is not set > # CONFIG_FB_BACKLIGHT is not set > CONFIG_FB_MODE_HELPERS=y > CONFIG_FB_TILEBLITTING=y > > # > # Frame buffer hardware drivers > # > # CONFIG_FB_UVESA is not set > # CONFIG_FB_S1D13XXX is not set > # CONFIG_FB_UDL is not set > # CONFIG_FB_VIRTUAL is not set > # CONFIG_FB_METRONOME is not set > # CONFIG_FB_MB862XX is not set > # CONFIG_FB_BROADSHEET is not set > CONFIG_FB_OMAP_LCD_VGA=y > # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set > CONFIG_OMAP2_VRAM=y > CONFIG_OMAP2_VRFB=y > CONFIG_OMAP2_DSS=y > CONFIG_OMAP2_VRAM_SIZE=0 > CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y > # CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set > CONFIG_OMAP2_DSS_DPI=y > CONFIG_OMAP2_DSS_RFBI=y > CONFIG_OMAP2_DSS_VENC=y > CONFIG_OMAP4_DSS_HDMI=y > CONFIG_OMAP2_DSS_SDI=y > CONFIG_OMAP2_DSS_DSI=y > # CONFIG_OMAP2_DSS_USE_DSI_PLL is not set > # CONFIG_OMAP2_DSS_FAKE_VSYNC is not set > CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 > CONFIG_FB_OMAP2=m > CONFIG_FB_OMAP2_DEBUG_SUPPORT=y > CONFIG_FB_OMAP2_NUM_FBS=3 > > # > # OMAP2/3 Display Device Drivers > # > CONFIG_PANEL_GENERIC_DPI=m > # CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set > CONFIG_PANEL_SHARP_LS037V7DW01=m > CONFIG_PANEL_NEC_NL8048HL11_01B=m > CONFIG_PANEL_TAAL=m > CONFIG_PANEL_TPO_TD043MTEA1=m > CONFIG_PANEL_ACX565AKM=m > CONFIG_BACKLIGHT_LCD_SUPPORT=y > CONFIG_LCD_CLASS_DEVICE=y > # CONFIG_LCD_L4F00242T03 is not set > # CONFIG_LCD_LMS283GF05 is not set > # CONFIG_LCD_LTV350QV is not set > # CONFIG_LCD_TDO24M is not set > # CONFIG_LCD_VGG2432A4 is not set > CONFIG_LCD_PLATFORM=y > # CONFIG_LCD_S6E63M0 is not set > # CONFIG_LCD_LD9040 is not set > CONFIG_BACKLIGHT_CLASS_DEVICE=y > CONFIG_BACKLIGHT_GENERIC=y > # CONFIG_BACKLIGHT_ADP8860 is not set > > # > # Display device support > # > CONFIG_DISPLAY_SUPPORT=y > > # > # Display hardware drivers > # > > # > # Console display driver support > # > CONFIG_DUMMY_CONSOLE=y > CONFIG_FRAMEBUFFER_CONSOLE=y > # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set > CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y > CONFIG_FONTS=y > CONFIG_FONT_8x8=y > CONFIG_FONT_8x16=y > # CONFIG_FONT_6x11 is not set > # CONFIG_FONT_7x14 is not set > # CONFIG_FONT_PEARL_8x8 is not set > # CONFIG_FONT_ACORN_8x8 is not set > # CONFIG_FONT_MINI_4x6 is not set > # CONFIG_FONT_SUN8x16 is not set > # CONFIG_FONT_SUN12x22 is not set > # CONFIG_FONT_10x18 is not set > CONFIG_LOGO=y > CONFIG_LOGO_LINUX_MONO=y > CONFIG_LOGO_LINUX_VGA16=y > CONFIG_LOGO_LINUX_CLUT224=y > # CONFIG_SOUND is not set > CONFIG_HID_SUPPORT=y > CONFIG_HID=y > # CONFIG_HIDRAW is not set > > # > # USB Input Devices > # > CONFIG_USB_HID=y > # CONFIG_HID_PID is not set > # CONFIG_USB_HIDDEV is not set > > # > # Special HID drivers > # > # CONFIG_HID_3M_PCT is not set > # CONFIG_HID_A4TECH is not set > # CONFIG_HID_ACRUX is not set > # CONFIG_HID_APPLE is not set > # CONFIG_HID_BELKIN is not set > # CONFIG_HID_CANDO is not set > # CONFIG_HID_CHERRY is not set > # CONFIG_HID_CHICONY is not set > # CONFIG_HID_CYPRESS is not set > # CONFIG_HID_DRAGONRISE is not set > # CONFIG_HID_EMS_FF is not set > # CONFIG_HID_EZKEY is not set > # CONFIG_HID_KEYTOUCH is not set > # CONFIG_HID_KYE is not set > # CONFIG_HID_UCLOGIC is not set > # CONFIG_HID_WALTOP is not set > # CONFIG_HID_GYRATION is not set > # CONFIG_HID_TWINHAN is not set > # CONFIG_HID_KENSINGTON is not set > # CONFIG_HID_LCPOWER is not set > # CONFIG_HID_LOGITECH is not set > # CONFIG_HID_MICROSOFT is not set > # CONFIG_HID_MOSART is not set > # CONFIG_HID_MONTEREY is not set > # CONFIG_HID_MULTITOUCH is not set > # CONFIG_HID_NTRIG is not set > # CONFIG_HID_ORTEK is not set > # CONFIG_HID_PANTHERLORD is not set > # CONFIG_HID_PETALYNX is not set > # CONFIG_HID_PICOLCD is not set > # CONFIG_HID_QUANTA is not set > # CONFIG_HID_ROCCAT is not set > # CONFIG_HID_ROCCAT_ARVO is not set > # CONFIG_HID_ROCCAT_KONE is not set > # CONFIG_HID_ROCCAT_KONEPLUS is not set > # CONFIG_HID_ROCCAT_KOVAPLUS is not set > # CONFIG_HID_ROCCAT_PYRA is not set > # CONFIG_HID_SAMSUNG is not set > # CONFIG_HID_SONY is not set > # CONFIG_HID_STANTUM is not set > # CONFIG_HID_SUNPLUS is not set > # CONFIG_HID_GREENASIA is not set > # CONFIG_HID_SMARTJOYPLUS is not set > # CONFIG_HID_TOPSEED is not set > # CONFIG_HID_THRUSTMASTER is not set > # CONFIG_HID_ZEROPLUS is not set > # CONFIG_HID_ZYDACRON is not set > CONFIG_USB_SUPPORT=y > CONFIG_USB_ARCH_HAS_HCD=y > CONFIG_USB_ARCH_HAS_OHCI=y > CONFIG_USB_ARCH_HAS_EHCI=y > CONFIG_USB=y > CONFIG_USB_DEBUG=y > CONFIG_USB_ANNOUNCE_NEW_DEVICES=y > > # > # Miscellaneous USB options > # > CONFIG_USB_DEVICEFS=y > CONFIG_USB_DEVICE_CLASS=y > # CONFIG_USB_DYNAMIC_MINORS is not set > CONFIG_USB_SUSPEND=y > # CONFIG_USB_OTG is not set > # CONFIG_USB_OTG_WHITELIST is not set > # CONFIG_USB_OTG_BLACKLIST_HUB is not set > CONFIG_USB_MON=y > CONFIG_USB_WUSB=y > # CONFIG_USB_WUSB_CBAF is not set > > # > # USB Host Controller Drivers > # > CONFIG_USB_C67X00_HCD=y > CONFIG_USB_EHCI_HCD=y > # CONFIG_USB_EHCI_ROOT_HUB_TT is not set > CONFIG_USB_EHCI_TT_NEWSCHED=y > CONFIG_USB_EHCI_HCD_OMAP=y > # CONFIG_USB_OXU210HP_HCD is not set > # CONFIG_USB_ISP116X_HCD is not set > # CONFIG_USB_ISP1760_HCD is not set > # CONFIG_USB_ISP1362_HCD is not set > # CONFIG_USB_OHCI_HCD is not set > # CONFIG_USB_SL811_HCD is not set > # CONFIG_USB_R8A66597_HCD is not set > # CONFIG_USB_HWA_HCD is not set > CONFIG_USB_MUSB_HDRC=y > CONFIG_USB_MUSB_TUSB6010=y > # CONFIG_USB_MUSB_OMAP2PLUS is not set > # CONFIG_USB_MUSB_AM35X is not set > CONFIG_USB_MUSB_HOST=y > # CONFIG_USB_MUSB_PERIPHERAL is not set > # CONFIG_USB_MUSB_OTG is not set > CONFIG_USB_MUSB_HDRC_HCD=y > CONFIG_MUSB_PIO_ONLY=y > # CONFIG_USB_MUSB_DEBUG is not set > > # > # USB Device Class drivers > # > # CONFIG_USB_ACM is not set > # CONFIG_USB_PRINTER is not set > CONFIG_USB_WDM=y > # CONFIG_USB_TMC is not set > > # > # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may > # > > # > # also be needed; see USB_STORAGE Help for more info > # > CONFIG_USB_STORAGE=y > # CONFIG_USB_STORAGE_DEBUG is not set > # CONFIG_USB_STORAGE_REALTEK is not set > # CONFIG_USB_STORAGE_DATAFAB is not set > # CONFIG_USB_STORAGE_FREECOM is not set > # CONFIG_USB_STORAGE_ISD200 is not set > # CONFIG_USB_STORAGE_USBAT is not set > # CONFIG_USB_STORAGE_SDDR09 is not set > # CONFIG_USB_STORAGE_SDDR55 is not set > # CONFIG_USB_STORAGE_JUMPSHOT is not set > # CONFIG_USB_STORAGE_ALAUDA is not set > # CONFIG_USB_STORAGE_ONETOUCH is not set > # CONFIG_USB_STORAGE_KARMA is not set > # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set > # CONFIG_USB_STORAGE_ENE_UB6250 is not set > # CONFIG_USB_UAS is not set > CONFIG_USB_LIBUSUAL=y > > # > # USB Imaging devices > # > # CONFIG_USB_MDC800 is not set > # CONFIG_USB_MICROTEK is not set > > # > # USB port drivers > # > # CONFIG_USB_SERIAL is not set > > # > # USB Miscellaneous drivers > # > # CONFIG_USB_EMI62 is not set > # CONFIG_USB_EMI26 is not set > # CONFIG_USB_ADUTUX is not set > # CONFIG_USB_SEVSEG is not set > # CONFIG_USB_RIO500 is not set > # CONFIG_USB_LEGOTOWER is not set > # CONFIG_USB_LCD is not set > # CONFIG_USB_LED is not set > # CONFIG_USB_CYPRESS_CY7C63 is not set > # CONFIG_USB_CYTHERM is not set > # CONFIG_USB_IDMOUSE is not set > # CONFIG_USB_FTDI_ELAN is not set > # CONFIG_USB_APPLEDISPLAY is not set > # CONFIG_USB_SISUSBVGA is not set > # CONFIG_USB_LD is not set > # CONFIG_USB_TRANCEVIBRATOR is not set > # CONFIG_USB_IOWARRIOR is not set > CONFIG_USB_TEST=y > # CONFIG_USB_ISIGHTFW is not set > # CONFIG_USB_YUREX is not set > CONFIG_USB_GADGET=y > CONFIG_USB_GADGET_DEBUG_FILES=y > CONFIG_USB_GADGET_DEBUG_FS=y > CONFIG_USB_GADGET_VBUS_DRAW=2 > CONFIG_USB_GADGET_SELECTED=y > CONFIG_USB_GADGET_FUSB300=y > CONFIG_USB_FUSB300=y > # CONFIG_USB_GADGET_OMAP is not set > # CONFIG_USB_GADGET_R8A66597 is not set > # CONFIG_USB_GADGET_PXA_U2O is not set > # CONFIG_USB_GADGET_M66592 is not set > # CONFIG_USB_GADGET_DUMMY_HCD is not set > CONFIG_USB_GADGET_DUALSPEED=y > CONFIG_USB_ZERO=m > # CONFIG_USB_ETH is not set > # CONFIG_USB_G_NCM is not set > # CONFIG_USB_GADGETFS is not set > # CONFIG_USB_FUNCTIONFS is not set > # CONFIG_USB_FILE_STORAGE is not set > # CONFIG_USB_MASS_STORAGE is not set > # CONFIG_USB_G_SERIAL is not set > # CONFIG_USB_G_PRINTER is not set > # CONFIG_USB_CDC_COMPOSITE is not set > # CONFIG_USB_G_MULTI is not set > # CONFIG_USB_G_HID is not set > # CONFIG_USB_G_DBGP is not set > # CONFIG_USB_G_WEBCAM is not set > > # > # OTG and related infrastructure > # > CONFIG_USB_OTG_UTILS=y > # CONFIG_USB_GPIO_VBUS is not set > # CONFIG_ISP1301_OMAP is not set > # CONFIG_USB_ULPI is not set > CONFIG_TWL4030_USB=y > CONFIG_TWL6030_USB=y > CONFIG_NOP_USB_XCEIV=y > CONFIG_UWB=y > CONFIG_UWB_HWA=y > # CONFIG_UWB_I1480U is not set > CONFIG_MMC=y > # CONFIG_MMC_DEBUG is not set > CONFIG_MMC_UNSAFE_RESUME=y > # CONFIG_MMC_CLKGATE is not set > > # > # MMC/SD/SDIO Card Drivers > # > CONFIG_MMC_BLOCK=y > CONFIG_MMC_BLOCK_MINORS=8 > CONFIG_MMC_BLOCK_BOUNCE=y > CONFIG_SDIO_UART=y > # CONFIG_MMC_TEST is not set > > # > # MMC/SD/SDIO Host Controller Drivers > # > # CONFIG_MMC_SDHCI is not set > CONFIG_MMC_OMAP=y > CONFIG_MMC_OMAP_HS=y > # CONFIG_MMC_SPI is not set > # CONFIG_MMC_DW is not set > # CONFIG_MMC_USHC is not set > # CONFIG_MEMSTICK is not set > # CONFIG_NEW_LEDS is not set > # CONFIG_NFC_DEVICES is not set > # CONFIG_ACCESSIBILITY is not set > CONFIG_RTC_LIB=y > CONFIG_RTC_CLASS=y > CONFIG_RTC_HCTOSYS=y > CONFIG_RTC_HCTOSYS_DEVICE="rtc0" > # CONFIG_RTC_DEBUG is not set > > # > # RTC interfaces > # > CONFIG_RTC_INTF_SYSFS=y > CONFIG_RTC_INTF_PROC=y > CONFIG_RTC_INTF_DEV=y > # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set > # CONFIG_RTC_DRV_TEST is not set > > # > # I2C RTC drivers > # > # CONFIG_RTC_DRV_DS1307 is not set > # CONFIG_RTC_DRV_DS1374 is not set > # CONFIG_RTC_DRV_DS1672 is not set > # CONFIG_RTC_DRV_DS3232 is not set > # CONFIG_RTC_DRV_MAX6900 is not set > # CONFIG_RTC_DRV_RS5C372 is not set > # CONFIG_RTC_DRV_ISL1208 is not set > # CONFIG_RTC_DRV_ISL12022 is not set > # CONFIG_RTC_DRV_X1205 is not set > # CONFIG_RTC_DRV_PCF8563 is not set > # CONFIG_RTC_DRV_PCF8583 is not set > # CONFIG_RTC_DRV_M41T80 is not set > # CONFIG_RTC_DRV_BQ32K is not set > CONFIG_RTC_DRV_TWL92330=y > CONFIG_RTC_DRV_TWL4030=y > # CONFIG_RTC_DRV_S35390A is not set > # CONFIG_RTC_DRV_FM3130 is not set > # CONFIG_RTC_DRV_RX8581 is not set > # CONFIG_RTC_DRV_RX8025 is not set > > # > # SPI RTC drivers > # > # CONFIG_RTC_DRV_M41T94 is not set > # CONFIG_RTC_DRV_DS1305 is not set > # CONFIG_RTC_DRV_DS1390 is not set > # CONFIG_RTC_DRV_MAX6902 is not set > # CONFIG_RTC_DRV_R9701 is not set > # CONFIG_RTC_DRV_RS5C348 is not set > # CONFIG_RTC_DRV_DS3234 is not set > # CONFIG_RTC_DRV_PCF2123 is not set > > # > # Platform RTC drivers > # > # CONFIG_RTC_DRV_CMOS is not set > # CONFIG_RTC_DRV_DS1286 is not set > # CONFIG_RTC_DRV_DS1511 is not set > # CONFIG_RTC_DRV_DS1553 is not set > # CONFIG_RTC_DRV_DS1742 is not set > # CONFIG_RTC_DRV_STK17TA8 is not set > # CONFIG_RTC_DRV_M48T86 is not set > # CONFIG_RTC_DRV_M48T35 is not set > # CONFIG_RTC_DRV_M48T59 is not set > # CONFIG_RTC_DRV_MSM6242 is not set > # CONFIG_RTC_DRV_BQ4802 is not set > # CONFIG_RTC_DRV_RP5C01 is not set > # CONFIG_RTC_DRV_V3020 is not set > > # > # on-CPU RTC drivers > # > # CONFIG_DMADEVICES is not set > # CONFIG_AUXDISPLAY is not set > # CONFIG_UIO is not set > # CONFIG_STAGING is not set > CONFIG_CLKDEV_LOOKUP=y > # CONFIG_HWSPINLOCK is not set > > # > # File systems > # > CONFIG_EXT2_FS=y > # CONFIG_EXT2_FS_XATTR is not set > # CONFIG_EXT2_FS_XIP is not set > CONFIG_EXT3_FS=y > CONFIG_EXT3_DEFAULTS_TO_ORDERED=y > # CONFIG_EXT3_FS_XATTR is not set > # CONFIG_EXT4_FS is not set > CONFIG_JBD=y > # CONFIG_JBD_DEBUG is not set > # CONFIG_REISERFS_FS is not set > # CONFIG_JFS_FS is not set > # CONFIG_XFS_FS is not set > # CONFIG_GFS2_FS is not set > # CONFIG_BTRFS_FS is not set > # CONFIG_NILFS2_FS is not set > CONFIG_FS_POSIX_ACL=y > CONFIG_FILE_LOCKING=y > CONFIG_FSNOTIFY=y > CONFIG_DNOTIFY=y > CONFIG_INOTIFY_USER=y > # CONFIG_FANOTIFY is not set > CONFIG_QUOTA=y > # CONFIG_QUOTA_NETLINK_INTERFACE is not set > CONFIG_PRINT_QUOTA_WARNING=y > # CONFIG_QUOTA_DEBUG is not set > CONFIG_QUOTA_TREE=y > # CONFIG_QFMT_V1 is not set > CONFIG_QFMT_V2=y > CONFIG_QUOTACTL=y > # CONFIG_AUTOFS4_FS is not set > # CONFIG_FUSE_FS is not set > > # > # Caches > # > # CONFIG_FSCACHE is not set > > # > # CD-ROM/DVD Filesystems > # > # CONFIG_ISO9660_FS is not set > # CONFIG_UDF_FS is not set > > # > # DOS/FAT/NT Filesystems > # > CONFIG_FAT_FS=y > CONFIG_MSDOS_FS=y > CONFIG_VFAT_FS=y > CONFIG_FAT_DEFAULT_CODEPAGE=437 > CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" > # CONFIG_NTFS_FS is not set > > # > # Pseudo filesystems > # > CONFIG_PROC_FS=y > CONFIG_PROC_SYSCTL=y > CONFIG_PROC_PAGE_MONITOR=y > CONFIG_SYSFS=y > CONFIG_TMPFS=y > # CONFIG_TMPFS_POSIX_ACL is not set > # CONFIG_HUGETLB_PAGE is not set > # CONFIG_CONFIGFS_FS is not set > CONFIG_MISC_FILESYSTEMS=y > # CONFIG_ADFS_FS is not set > # CONFIG_AFFS_FS is not set > # CONFIG_ECRYPT_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_HFSPLUS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BFS_FS is not set > # CONFIG_EFS_FS is not set > CONFIG_JFFS2_FS=y > CONFIG_JFFS2_FS_DEBUG=0 > CONFIG_JFFS2_FS_WRITEBUFFER=y > # CONFIG_JFFS2_FS_WBUF_VERIFY is not set > CONFIG_JFFS2_SUMMARY=y > CONFIG_JFFS2_FS_XATTR=y > CONFIG_JFFS2_FS_POSIX_ACL=y > CONFIG_JFFS2_FS_SECURITY=y > CONFIG_JFFS2_COMPRESSION_OPTIONS=y > CONFIG_JFFS2_ZLIB=y > CONFIG_JFFS2_LZO=y > CONFIG_JFFS2_RTIME=y > CONFIG_JFFS2_RUBIN=y > # CONFIG_JFFS2_CMODE_NONE is not set > CONFIG_JFFS2_CMODE_PRIORITY=y > # CONFIG_JFFS2_CMODE_SIZE is not set > # CONFIG_JFFS2_CMODE_FAVOURLZO is not set > CONFIG_UBIFS_FS=y > # CONFIG_UBIFS_FS_XATTR is not set > # CONFIG_UBIFS_FS_ADVANCED_COMPR is not set > CONFIG_UBIFS_FS_LZO=y > CONFIG_UBIFS_FS_ZLIB=y > # CONFIG_UBIFS_FS_DEBUG is not set > # CONFIG_LOGFS is not set > CONFIG_CRAMFS=y > # CONFIG_SQUASHFS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_OMFS_FS is not set > # CONFIG_HPFS_FS is not set > # CONFIG_QNX4FS_FS is not set > # CONFIG_ROMFS_FS is not set > # CONFIG_PSTORE is not set > # CONFIG_SYSV_FS is not set > # CONFIG_UFS_FS is not set > CONFIG_NETWORK_FILESYSTEMS=y > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > CONFIG_NFS_V3_ACL=y > CONFIG_NFS_V4=y > # CONFIG_NFS_V4_1 is not set > CONFIG_ROOT_NFS=y > # CONFIG_NFS_USE_LEGACY_DNS is not set > CONFIG_NFS_USE_KERNEL_DNS=y > # CONFIG_NFS_USE_NEW_IDMAPPER is not set > # CONFIG_NFSD is not set > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_NFS_ACL_SUPPORT=y > CONFIG_NFS_COMMON=y > CONFIG_SUNRPC=y > CONFIG_SUNRPC_GSS=y > # CONFIG_CEPH_FS is not set > # CONFIG_CIFS is not set > # CONFIG_NCP_FS is not set > # CONFIG_CODA_FS is not set > # CONFIG_AFS_FS is not set > > # > # Partition Types > # > CONFIG_PARTITION_ADVANCED=y > # CONFIG_ACORN_PARTITION is not set > # CONFIG_OSF_PARTITION is not set > # CONFIG_AMIGA_PARTITION is not set > # CONFIG_ATARI_PARTITION is not set > # CONFIG_MAC_PARTITION is not set > CONFIG_MSDOS_PARTITION=y > # CONFIG_BSD_DISKLABEL is not set > # CONFIG_MINIX_SUBPARTITION is not set > # CONFIG_SOLARIS_X86_PARTITION is not set > # CONFIG_UNIXWARE_DISKLABEL is not set > # CONFIG_LDM_PARTITION is not set > # CONFIG_SGI_PARTITION is not set > # CONFIG_ULTRIX_PARTITION is not set > # CONFIG_SUN_PARTITION is not set > # CONFIG_KARMA_PARTITION is not set > # CONFIG_EFI_PARTITION is not set > # CONFIG_SYSV68_PARTITION is not set > CONFIG_NLS=y > CONFIG_NLS_DEFAULT="iso8859-1" > CONFIG_NLS_CODEPAGE_437=y > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ASCII is not set > CONFIG_NLS_ISO8859_1=y > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # Kernel hacking > # > CONFIG_PRINTK_TIME=y > CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 > CONFIG_ENABLE_WARN_DEPRECATED=y > CONFIG_ENABLE_MUST_CHECK=y > CONFIG_FRAME_WARN=1024 > CONFIG_MAGIC_SYSRQ=y > # CONFIG_STRIP_ASM_SYMS is not set > # CONFIG_UNUSED_SYMBOLS is not set > CONFIG_DEBUG_FS=y > # CONFIG_HEADERS_CHECK is not set > # CONFIG_DEBUG_SECTION_MISMATCH is not set > # CONFIG_DEBUG_KERNEL is not set > # CONFIG_HARDLOCKUP_DETECTOR is not set > # CONFIG_SPARSE_RCU_POINTER is not set > CONFIG_STACKTRACE=y > CONFIG_DEBUG_BUGVERBOSE=y > # CONFIG_DEBUG_MEMORY_INIT is not set > # CONFIG_RCU_CPU_STALL_DETECTOR is not set > # CONFIG_LKDTM is not set > # CONFIG_SYSCTL_SYSCALL_CHECK is not set > CONFIG_NOP_TRACER=y > CONFIG_HAVE_FUNCTION_TRACER=y > CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y > CONFIG_HAVE_DYNAMIC_FTRACE=y > CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y > CONFIG_HAVE_C_RECORDMCOUNT=y > CONFIG_RING_BUFFER=y > CONFIG_EVENT_TRACING=y > CONFIG_EVENT_POWER_TRACING_DEPRECATED=y > CONFIG_CONTEXT_SWITCH_TRACER=y > CONFIG_RING_BUFFER_ALLOW_SWAP=y > CONFIG_TRACING=y > CONFIG_TRACING_SUPPORT=y > CONFIG_FTRACE=y > # CONFIG_FUNCTION_TRACER is not set > # CONFIG_IRQSOFF_TRACER is not set > # CONFIG_SCHED_TRACER is not set > # CONFIG_ENABLE_DEFAULT_TRACERS is not set > CONFIG_BRANCH_PROFILE_NONE=y > # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set > # CONFIG_PROFILE_ALL_BRANCHES is not set > # CONFIG_STACK_TRACER is not set > # CONFIG_BLK_DEV_IO_TRACE is not set > CONFIG_KPROBE_EVENT=y > # CONFIG_RING_BUFFER_BENCHMARK is not set > # CONFIG_DYNAMIC_DEBUG is not set > # CONFIG_DMA_API_DEBUG is not set > # CONFIG_ATOMIC64_SELFTEST is not set > # CONFIG_SAMPLES is not set > CONFIG_HAVE_ARCH_KGDB=y > # CONFIG_TEST_KSTRTOX is not set > # CONFIG_STRICT_DEVMEM is not set > CONFIG_ARM_UNWIND=y > # CONFIG_DEBUG_USER is not set > # CONFIG_OC_ETM is not set > > # > # Security options > # > CONFIG_KEYS=y > # CONFIG_KEYS_DEBUG_PROC_KEYS is not set > # CONFIG_SECURITY_DMESG_RESTRICT is not set > CONFIG_SECURITY=y > # CONFIG_SECURITYFS is not set > # CONFIG_SECURITY_NETWORK is not set > # CONFIG_SECURITY_PATH is not set > # CONFIG_SECURITY_TOMOYO is not set > # CONFIG_SECURITY_APPARMOR is not set > # CONFIG_IMA is not set > CONFIG_DEFAULT_SECURITY_DAC=y > CONFIG_DEFAULT_SECURITY="" > CONFIG_CRYPTO=y > > # > # Crypto core or helper > # > CONFIG_CRYPTO_ALGAPI=y > CONFIG_CRYPTO_ALGAPI2=y > CONFIG_CRYPTO_AEAD2=y > CONFIG_CRYPTO_BLKCIPHER=y > CONFIG_CRYPTO_BLKCIPHER2=y > CONFIG_CRYPTO_HASH=y > CONFIG_CRYPTO_HASH2=y > CONFIG_CRYPTO_RNG2=y > CONFIG_CRYPTO_PCOMP2=y > CONFIG_CRYPTO_MANAGER=y > CONFIG_CRYPTO_MANAGER2=y > CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y > # CONFIG_CRYPTO_GF128MUL is not set > # CONFIG_CRYPTO_NULL is not set > # CONFIG_CRYPTO_PCRYPT is not set > CONFIG_CRYPTO_WORKQUEUE=y > # CONFIG_CRYPTO_CRYPTD is not set > # CONFIG_CRYPTO_AUTHENC is not set > # CONFIG_CRYPTO_TEST is not set > > # > # Authenticated Encryption with Associated Data > # > # CONFIG_CRYPTO_CCM is not set > # CONFIG_CRYPTO_GCM is not set > # CONFIG_CRYPTO_SEQIV is not set > > # > # Block modes > # > CONFIG_CRYPTO_CBC=y > # CONFIG_CRYPTO_CTR is not set > # CONFIG_CRYPTO_CTS is not set > CONFIG_CRYPTO_ECB=m > # CONFIG_CRYPTO_LRW is not set > # CONFIG_CRYPTO_PCBC is not set > # CONFIG_CRYPTO_XTS is not set > > # > # Hash modes > # > # CONFIG_CRYPTO_HMAC is not set > # CONFIG_CRYPTO_XCBC is not set > # CONFIG_CRYPTO_VMAC is not set > > # > # Digest > # > CONFIG_CRYPTO_CRC32C=y > # CONFIG_CRYPTO_GHASH is not set > # CONFIG_CRYPTO_MD4 is not set > CONFIG_CRYPTO_MD5=y > CONFIG_CRYPTO_MICHAEL_MIC=y > # CONFIG_CRYPTO_RMD128 is not set > # CONFIG_CRYPTO_RMD160 is not set > # CONFIG_CRYPTO_RMD256 is not set > # CONFIG_CRYPTO_RMD320 is not set > # CONFIG_CRYPTO_SHA1 is not set > # CONFIG_CRYPTO_SHA256 is not set > # CONFIG_CRYPTO_SHA512 is not set > # CONFIG_CRYPTO_TGR192 is not set > # CONFIG_CRYPTO_WP512 is not set > > # > # Ciphers > # > CONFIG_CRYPTO_AES=y > # CONFIG_CRYPTO_ANUBIS is not set > CONFIG_CRYPTO_ARC4=m > # CONFIG_CRYPTO_BLOWFISH is not set > # CONFIG_CRYPTO_CAMELLIA is not set > # CONFIG_CRYPTO_CAST5 is not set > # CONFIG_CRYPTO_CAST6 is not set > CONFIG_CRYPTO_DES=y > # CONFIG_CRYPTO_FCRYPT is not set > # CONFIG_CRYPTO_KHAZAD is not set > # CONFIG_CRYPTO_SALSA20 is not set > # CONFIG_CRYPTO_SEED is not set > # CONFIG_CRYPTO_SERPENT is not set > # CONFIG_CRYPTO_TEA is not set > # CONFIG_CRYPTO_TWOFISH is not set > > # > # Compression > # > CONFIG_CRYPTO_DEFLATE=y > # CONFIG_CRYPTO_ZLIB is not set > CONFIG_CRYPTO_LZO=y > > # > # Random Number Generation > # > # CONFIG_CRYPTO_ANSI_CPRNG is not set > # CONFIG_CRYPTO_USER_API_HASH is not set > # CONFIG_CRYPTO_USER_API_SKCIPHER is not set > CONFIG_CRYPTO_HW=y > # CONFIG_CRYPTO_DEV_OMAP_SHAM is not set > # CONFIG_CRYPTO_DEV_OMAP_AES is not set > CONFIG_BINARY_PRINTF=y > > # > # Library routines > # > CONFIG_BITREVERSE=y > CONFIG_GENERIC_FIND_LAST_BIT=y > CONFIG_CRC_CCITT=y > CONFIG_CRC16=y > CONFIG_CRC_T10DIF=y > CONFIG_CRC_ITU_T=y > CONFIG_CRC32=y > CONFIG_CRC7=y > CONFIG_LIBCRC32C=y > CONFIG_ZLIB_INFLATE=y > CONFIG_ZLIB_DEFLATE=y > CONFIG_LZO_COMPRESS=y > CONFIG_LZO_DECOMPRESS=y > # CONFIG_XZ_DEC is not set > # CONFIG_XZ_DEC_BCJ is not set > CONFIG_DECOMPRESS_GZIP=y > CONFIG_HAS_IOMEM=y > CONFIG_HAS_IOPORT=y > CONFIG_HAS_DMA=y > CONFIG_CPU_RMAP=y > CONFIG_NLATTR=y > CONFIG_GENERIC_ATOMIC64=y > CONFIG_AVERAGE=y > > > > -- > Javier Martin > Vista Silicon S.L. > CDTUC - FASE C - Oficina S-345 > Avda de los Castros s/n > 39005- Santander. Cantabria. Spain > +34 942 25 32 60 > www.vista-silicon.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 26 May 2011 10:51, Koen Kooi <koen@beagleboard.org> wrote: > > Op 26 mei 2011, om 09:24 heeft Javier Martin het volgende geschreven: > >> Hi Koen, >> >> On 25 May 2011 15:38, Koen Kooi <koen@beagleboard.org> wrote: >>> >>> Op 25 mei 2011, om 13:16 heeft Javier Martin het volgende geschreven: >>> >>>> It includes several fixes pointed out by Laurent Pinchart. However, >>>> the BUG which shows artifacts in the image (horizontal lines) still >>>> persists. It won't happen if 1v8 regulator is not disabled (i.e. >>>> comment line where it is disabled in function "mt9p031_power_off"). >>>> I know there can be some other details to fix but I would like someone >>>> could help in the power management issue. >>> >>> I tried this + your beagle patch on 2.6.39 and both ISP and sensor being builtin to the kernel, I get the following: >>> >>> root@beagleboardxMC:~# media-ctl -r -l '"mt9p031 2-0048":0->"OMAP3 ISP CCDC":0[1 ], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' >>> Resetting all links to inactive >>> Setting up link 16:0 -> 5:0 [1] >>> Setting up link 5:1 -> 6:0 [1] >>> >>> root@beagleboardxMC:~# media-ctl -f '"mt9p031 2-0048":0[SGRBG12 320x240], "OMAP3 ISP CCDC":0[SGRBG8 320x240], "OMAP3 ISP CCDC":1[SGRBG8 320x240]' >>> Setting up format SGRBG12 320x240 on pad mt9p031 2-0048/0 >>> Format set: SGRBG12 320x240 >>> Setting up format SGRBG12 320x240 on pad OMAP3 ISP CCDC/0 >>> Format set: SGRBG12 320x240 >>> Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/0 >>> Format set: SGRBG8 320x240 >>> Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/1 >>> Format set: SGRBG8 320x240 >>> >>> oot@beagleboardxMC:~# yavta -f SGRBG8 -s 320x240 -n 4 --capture=10 --skip 3 -F `media-ctl -e "OMAP3 ISP CCDC output"` >>> Device /dev/video2 opened. >>> Device `OMAP3 ISP CCDC output' on `media' is a video capture device. >>> Video format set: SGRBG8 (47425247) 320x240 buffer size 76800 >>> Video format: SGRBG8 (47425247) 320x240 buffer size 76800 >>> 4 buffers requested. >>> length: 76800 offset: 0 >>> Buffer 0 mapped at address 0x4030d000. >>> length: 76800 offset: 77824 >>> Buffer 1 mapped at address 0x40330000. >>> length: 76800 offset: 155648 >>> Buffer 2 mapped at address 0x4042d000. >>> length: 76800 offset: 233472 >>> Buffer 3 mapped at address 0x40502000. >>> [ 4131.459930] omap3isp omap3isp: CCDC won't become idle! >> >> Please, test it again using new RFC v3 I've just submitted. > > Slightly better: > > Video format: SGRBG8 (47425247) 320x240 buffer size 76800 > 4 buffers requested. > length: 76800 offset: 0 > Buffer 0 mapped at address 0x401d1000. > length: 76800 offset: 77824 > Buffer 1 mapped at address 0x40266000. > length: 76800 offset: 155648 > Buffer 2 mapped at address 0x402c6000. > length: 76800 offset: 233472 > Buffer 3 mapped at address 0x4036e000. > 0 (0) [-] 4294967295 76800 bytes 110.899139 1306398890.364593 0.001 fps > 1 (1) [-] 4294967295 76800 bytes 111.128997 1306398890.594421 4.351 fps > [ 111.214019] omap3isp omap3isp: CCDC won't become idle! > > >> I have personally tested it against kernel 2.6.39 with the following >> .config file: > > And with that config: > > [ 4.250244] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2) > [ 4.257720] Please append a correct "root=" boot option; here are the available partitions: > [ 4.266540] b300 7977472 mmcblk0 driver: mmcblk > [ 4.272125] b301 72261 mmcblk0p1 00000000-0000-0000-0000-000000000mmcblk0p1 > [ 4.280578] b302 7903980 mmcblk0p2 00000000-0000-0000-0000-000000000mmcblk0p2 > [ 4.289031] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) > > Which is the good old kernel-mux-is-broken problem again, after turning off kernel-mux: > > 0 (0) [-] 4294967295 76800 bytes 29.186920 1306399517.283752 0.001 fps > 1 (1) [-] 4294967295 76800 bytes 29.416778 1306399517.513580 4.351 fps > 2 (2) [-] 4294967295 76800 bytes 29.528137 1306399517.624938 8.980 fps > [ 29.616943] omap3isp omap3isp: CCDC won't become idle! > Are you using a LI-5M03 module? (https://www.leopardimaging.com/Beagle_Board_xM_Camera.html) I also added pull ups to the I2C2 line so that I could communicate with mt9p031. > So that seems to be the same as with my config. How do I view the files yavta dumps? I use a patched version of yavta and Mplayer to see video (http://download.open-technology.de/BeagleBoard_xM-MT9P031/) Then in my PC: nc -l 3000 | ./mplayer - -demuxer rawvideo -rawvideo w=320:h=240:format=ba81:size=76800 -vf ba81 -vo x11 In the Beagleboard: ./media-ctl -r -l '"mt9p031 2-0048":0->"OMAP3 ISP CCDC":0[1], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' ./media-ctl -f '"mt9p031 2-0048":0[SGRBG12 320x240], "OMAP3 ISP CCDC":0[SGRBG8 320x240], "OMAP3 ISP CCDC":1[SGRBG8 320x240]' ./yavta --stdout -f SGRBG8 -s 320x240 -n 4 --capture=100 --skip 3 -F `./media-ctl -e "OMAP3 ISP CCDC output"` | nc 192.168.0.42 3000
On Thu, 26 May 2011, javier Martin wrote: > Are you using a LI-5M03 module? > (https://www.leopardimaging.com/Beagle_Board_xM_Camera.html) > I also added pull ups to the I2C2 line so that I could communicate with mt9p031. Hm, strange, I didn't have to solder anything. Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 26 May 2011 11:35:59 Guennadi Liakhovetski wrote: > On Thu, 26 May 2011, javier Martin wrote: > > Are you using a LI-5M03 module? > > (https://www.leopardimaging.com/Beagle_Board_xM_Camera.html) > > I also added pull ups to the I2C2 line so that I could communicate with > > mt9p031. > > Hm, strange, I didn't have to solder anything. You can also turn the OMAP3 internal pull-ups. Depending on who you ask, that's usually way simpler than soldering resistors :-)
Op 26 mei 2011, om 11:27 heeft javier Martin het volgende geschreven: > On 26 May 2011 10:51, Koen Kooi <koen@beagleboard.org> wrote: >> >> Op 26 mei 2011, om 09:24 heeft Javier Martin het volgende geschreven: >> >>> Hi Koen, >>> >>> On 25 May 2011 15:38, Koen Kooi <koen@beagleboard.org> wrote: >>>> >>>> Op 25 mei 2011, om 13:16 heeft Javier Martin het volgende geschreven: >>>> >>>>> It includes several fixes pointed out by Laurent Pinchart. However, >>>>> the BUG which shows artifacts in the image (horizontal lines) still >>>>> persists. It won't happen if 1v8 regulator is not disabled (i.e. >>>>> comment line where it is disabled in function "mt9p031_power_off"). >>>>> I know there can be some other details to fix but I would like someone >>>>> could help in the power management issue. >>>> >>>> I tried this + your beagle patch on 2.6.39 and both ISP and sensor being builtin to the kernel, I get the following: >>>> >>>> root@beagleboardxMC:~# media-ctl -r -l '"mt9p031 2-0048":0->"OMAP3 ISP CCDC":0[1 ], "OMAP3 ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' >>>> Resetting all links to inactive >>>> Setting up link 16:0 -> 5:0 [1] >>>> Setting up link 5:1 -> 6:0 [1] >>>> >>>> root@beagleboardxMC:~# media-ctl -f '"mt9p031 2-0048":0[SGRBG12 320x240], "OMAP3 ISP CCDC":0[SGRBG8 320x240], "OMAP3 ISP CCDC":1[SGRBG8 320x240]' >>>> Setting up format SGRBG12 320x240 on pad mt9p031 2-0048/0 >>>> Format set: SGRBG12 320x240 >>>> Setting up format SGRBG12 320x240 on pad OMAP3 ISP CCDC/0 >>>> Format set: SGRBG12 320x240 >>>> Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/0 >>>> Format set: SGRBG8 320x240 >>>> Setting up format SGRBG8 320x240 on pad OMAP3 ISP CCDC/1 >>>> Format set: SGRBG8 320x240 >>>> >>>> oot@beagleboardxMC:~# yavta -f SGRBG8 -s 320x240 -n 4 --capture=10 --skip 3 -F `media-ctl -e "OMAP3 ISP CCDC output"` >>>> Device /dev/video2 opened. >>>> Device `OMAP3 ISP CCDC output' on `media' is a video capture device. >>>> Video format set: SGRBG8 (47425247) 320x240 buffer size 76800 >>>> Video format: SGRBG8 (47425247) 320x240 buffer size 76800 >>>> 4 buffers requested. >>>> length: 76800 offset: 0 >>>> Buffer 0 mapped at address 0x4030d000. >>>> length: 76800 offset: 77824 >>>> Buffer 1 mapped at address 0x40330000. >>>> length: 76800 offset: 155648 >>>> Buffer 2 mapped at address 0x4042d000. >>>> length: 76800 offset: 233472 >>>> Buffer 3 mapped at address 0x40502000. >>>> [ 4131.459930] omap3isp omap3isp: CCDC won't become idle! >>> >>> Please, test it again using new RFC v3 I've just submitted. >> >> Slightly better: >> >> Video format: SGRBG8 (47425247) 320x240 buffer size 76800 >> 4 buffers requested. >> length: 76800 offset: 0 >> Buffer 0 mapped at address 0x401d1000. >> length: 76800 offset: 77824 >> Buffer 1 mapped at address 0x40266000. >> length: 76800 offset: 155648 >> Buffer 2 mapped at address 0x402c6000. >> length: 76800 offset: 233472 >> Buffer 3 mapped at address 0x4036e000. >> 0 (0) [-] 4294967295 76800 bytes 110.899139 1306398890.364593 0.001 fps >> 1 (1) [-] 4294967295 76800 bytes 111.128997 1306398890.594421 4.351 fps >> [ 111.214019] omap3isp omap3isp: CCDC won't become idle! >> >> >>> I have personally tested it against kernel 2.6.39 with the following >>> .config file: >> >> And with that config: >> >> [ 4.250244] VFS: Cannot open root device "mmcblk0p2" or unknown-block(179,2) >> [ 4.257720] Please append a correct "root=" boot option; here are the available partitions: >> [ 4.266540] b300 7977472 mmcblk0 driver: mmcblk >> [ 4.272125] b301 72261 mmcblk0p1 00000000-0000-0000-0000-000000000mmcblk0p1 >> [ 4.280578] b302 7903980 mmcblk0p2 00000000-0000-0000-0000-000000000mmcblk0p2 >> [ 4.289031] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2) >> >> Which is the good old kernel-mux-is-broken problem again, after turning off kernel-mux: >> >> 0 (0) [-] 4294967295 76800 bytes 29.186920 1306399517.283752 0.001 fps >> 1 (1) [-] 4294967295 76800 bytes 29.416778 1306399517.513580 4.351 fps >> 2 (2) [-] 4294967295 76800 bytes 29.528137 1306399517.624938 8.980 fps >> [ 29.616943] omap3isp omap3isp: CCDC won't become idle! >> > > Are you using a LI-5M03 module? > (https://www.leopardimaging.com/Beagle_Board_xM_Camera.html) Yes, I also have the vga and 3M module to test with. > I also added pull ups to the I2C2 line so that I could communicate with mt9p031. Uboot enables the on-chip pullups, which worked for me when using the 2.6.32 kernel. >> So that seems to be the same as with my config. How do I view the files yavta dumps? > > I use a patched version of yavta and Mplayer to see video > (http://download.open-technology.de/BeagleBoard_xM-MT9P031/) > > Then in my PC: > nc -l 3000 | ./mplayer - -demuxer rawvideo -rawvideo > w=320:h=240:format=ba81:size=76800 -vf ba81 -vo x11 > > In the Beagleboard: > > ./media-ctl -r -l '"mt9p031 2-0048":0->"OMAP3 ISP CCDC":0[1], "OMAP3 > ISP CCDC":1->"OMAP3 ISP CCDC output":0[1]' > ./media-ctl -f '"mt9p031 2-0048":0[SGRBG12 320x240], "OMAP3 ISP > CCDC":0[SGRBG8 320x240], "OMAP3 ISP CCDC":1[SGRBG8 320x240]' > ./yavta --stdout -f SGRBG8 -s 320x240 -n 4 --capture=100 --skip 3 -F > `./media-ctl -e "OMAP3 ISP CCDC output"` | nc 192.168.0.42 3000 I'll give that a try later today. regards, Koen > > > -- > Javier Martin > Vista Silicon S.L. > CDTUC - FASE C - Oficina S-345 > Avda de los Castros s/n > 39005- Santander. Cantabria. Spain > +34 942 25 32 60 > www.vista-silicon.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
OK, I think I've found the problem with the power management. As it is stated in mt9p031 datasheet [3] p 59, a sequence involving [VAA,VAA_PIX,VDD_PLL], [VDD,VDD_IO], [Reset] and [Ext Clk] must be followed in order to properly power up or down the sensor. If we take a look to the LI-5M031 schematic[1] and Beagleboard xM schematic [2] we'll notice that voltages are connected as follows: [VDD] (1,8V) <--- V2.8 <--- CAM_CORE <--- VAUX3 TPS65950 [VDD_IO (VDDQ)] (1,8V) <--- V1.8 <--- CAM_IO <--- VAUX4 TPS65950 [VAA, VAA_PIX, VDD_PLL] (2,8V) <---| U6 |<-- V3.3VD <-- HUB_3V3 <--| U16 | enabled by USBHOST_PWR_EN <-- LEDA TPS65950 VAUX3 (VDD) and VAUX4 (VDD_IO) are fine, they are only used for powering our camera sensor. However, when it comes to the analog part (VAA, VAA_PIX...), it is got from HUB_3V3 which is also used for powering USB and ethernet. If we really want to activate/deactivate regulators that power mt9p031 we need to follow [3] p59. However, for that purpose we need to ensure that a call to regulator_enable() or regulator_disable() will really power on/off that supply, otherwise the sequence won't be matched and the chip will have problems. Beagleboard xM is a good example of platform where this happens since HUB_3V3 and thus (VAA, VAA_PIX, etc...) cannot be deactivated since it is being used by other devices. But there could be others. So, as a conclusion, and in order to unblock my work, my purpose for power management in mt9p031 would be the following: - Drop regulator handling as we cannot guarantee that power on sequence will be accomplished. - Keep on asserting/de-asserting reset which saves a lot of power. - Also activate/deactivate clock when necessary to save some power. I'm looking forward to read your comments on this. [1] https://www.leopardimaging.com/uploads/li-5m03_camera_board_v2.pdf [2] http://beagle.s3.amazonaws.com/design/xM-A3/BB-xM_Schematic_REVA3.pdf [3] http://www.aptina.com/products/image_sensors/mt9p031i12stc/
Hi Javier, On Thursday 26 May 2011 13:31:37 javier Martin wrote: > OK, I think I've found the problem with the power management. > > As it is stated in mt9p031 datasheet [3] p 59, a sequence involving > [VAA,VAA_PIX,VDD_PLL], [VDD,VDD_IO], [Reset] and [Ext Clk] must be > followed in order to properly power up or down the sensor. > > If we take a look to the LI-5M031 schematic[1] and Beagleboard xM > schematic [2] we'll notice that voltages are connected as follows: > > [VDD] (1,8V) <--- V2.8 <--- CAM_CORE <--- VAUX3 TPS65950 > [VDD_IO (VDDQ)] (1,8V) <--- V1.8 <--- CAM_IO <--- VAUX4 TPS65950 > [VAA, VAA_PIX, VDD_PLL] (2,8V) <---| U6 |<-- V3.3VD <-- HUB_3V3 <--| > U16 | enabled by USBHOST_PWR_EN <-- LEDA TPS65950 > > VAUX3 (VDD) and VAUX4 (VDD_IO) are fine, they are only used for > powering our camera sensor. However, when it comes to the analog part > (VAA, VAA_PIX...), it is got from HUB_3V3 which is also used for > powering USB and ethernet. *sigh* Why do hardware designers do things like that, really ? > If we really want to activate/deactivate regulators that power mt9p031 > we need to follow [3] p59. However, for that purpose we need to ensure > that a call to regulator_enable() or regulator_disable() will really > power on/off that supply, otherwise the sequence won't be matched and > the chip will have problems. > > Beagleboard xM is a good example of platform where this happens since > HUB_3V3 and thus (VAA, VAA_PIX, etc...) cannot be deactivated since it > is being used by other devices. But there could be others. > > So, as a conclusion, and in order to unblock my work, my purpose for > power management in mt9p031 would be the following: > - Drop regulator handling as we cannot guarantee that power on > sequence will be accomplished. > - Keep on asserting/de-asserting reset which saves a lot of power. > - Also activate/deactivate clock when necessary to save some power. > > I'm looking forward to read your comments on this. Even if you keep the sensor powered all the time, how do you ensure that VAUX3 is available before HUB_3V3 when the system is powered up ? > [1] https://www.leopardimaging.com/uploads/li-5m03_camera_board_v2.pdf > [2] http://beagle.s3.amazonaws.com/design/xM-A3/BB-xM_Schematic_REVA3.pdf > [3] http://www.aptina.com/products/image_sensors/mt9p031i12stc/
On 27 May 2011 16:31, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > Hi Javier, > > On Thursday 26 May 2011 13:31:37 javier Martin wrote: >> OK, I think I've found the problem with the power management. >> >> As it is stated in mt9p031 datasheet [3] p 59, a sequence involving >> [VAA,VAA_PIX,VDD_PLL], [VDD,VDD_IO], [Reset] and [Ext Clk] must be >> followed in order to properly power up or down the sensor. >> >> If we take a look to the LI-5M031 schematic[1] and Beagleboard xM >> schematic [2] we'll notice that voltages are connected as follows: >> >> [VDD] (1,8V) <--- V2.8 <--- CAM_CORE <--- VAUX3 TPS65950 >> [VDD_IO (VDDQ)] (1,8V) <--- V1.8 <--- CAM_IO <--- VAUX4 TPS65950 >> [VAA, VAA_PIX, VDD_PLL] (2,8V) <---| U6 |<-- V3.3VD <-- HUB_3V3 <--| >> U16 | enabled by USBHOST_PWR_EN <-- LEDA TPS65950 >> >> VAUX3 (VDD) and VAUX4 (VDD_IO) are fine, they are only used for >> powering our camera sensor. However, when it comes to the analog part >> (VAA, VAA_PIX...), it is got from HUB_3V3 which is also used for >> powering USB and ethernet. > > *sigh* Why do hardware designers do things like that, really ? > >> If we really want to activate/deactivate regulators that power mt9p031 >> we need to follow [3] p59. However, for that purpose we need to ensure >> that a call to regulator_enable() or regulator_disable() will really >> power on/off that supply, otherwise the sequence won't be matched and >> the chip will have problems. >> >> Beagleboard xM is a good example of platform where this happens since >> HUB_3V3 and thus (VAA, VAA_PIX, etc...) cannot be deactivated since it >> is being used by other devices. But there could be others. >> >> So, as a conclusion, and in order to unblock my work, my purpose for >> power management in mt9p031 would be the following: >> - Drop regulator handling as we cannot guarantee that power on >> sequence will be accomplished. >> - Keep on asserting/de-asserting reset which saves a lot of power. >> - Also activate/deactivate clock when necessary to save some power. >> >> I'm looking forward to read your comments on this. > > Even if you keep the sensor powered all the time, how do you ensure that VAUX3 > is available before HUB_3V3 when the system is powered up ? You can't. And in fact what happens its the opposite. But it works. On the other hand, not being able to disable/enable HUB_3V3 can make, as a hardware guy has told me, power on reset internal circuit not to work [1] and thus the power down / power up fails. [1] http://en.wikipedia.org/wiki/Power-on_reset
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 00f51dd..8a596cc 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -329,6 +329,13 @@ config VIDEO_OV7670 OV7670 VGA camera. It currently only works with the M88ALP01 controller. +config VIDEO_MT9P031 + tristate "Aptina MT9P031 support" + depends on I2C && VIDEO_V4L2 + ---help--- + This is a Video4Linux2 sensor-level driver for the Aptina + (Micron) mt9p031 5 Mpixel camera. + config VIDEO_MT9V011 tristate "Micron mt9v011 sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index ace5d8b..912b29b 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_VIDEO_UPD64083) += upd64083.o obj-$(CONFIG_VIDEO_OV7670) += ov7670.o obj-$(CONFIG_VIDEO_TCM825X) += tcm825x.o obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o +obj-$(CONFIG_VIDEO_MT9P031) += mt9p031.o obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o diff --git a/drivers/media/video/mt9p031.c b/drivers/media/video/mt9p031.c new file mode 100644 index 0000000..39579de --- /dev/null +++ b/drivers/media/video/mt9p031.c @@ -0,0 +1,752 @@ +/* + * Driver for MT9P031 CMOS Image Sensor from Aptina + * + * Copyright (C) 2011, Javier Martin <javier.martin@vista-silicon.com> + * + * Copyright (C) 2011, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * Based on the MT9V032 driver and Bastian Hecht's code. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/log2.h> +#include <linux/pm.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <media/v4l2-subdev.h> +#include <linux/videodev2.h> + +#include <media/mt9p031.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-device.h> + +#define MT9P031_PIXCLK_FREQ 54000000 + +/* mt9p031 selected register addresses */ +#define MT9P031_CHIP_VERSION 0x00 +#define MT9P031_CHIP_VERSION_VALUE 0x1801 +#define MT9P031_ROW_START 0x01 +#define MT9P031_ROW_START_DEF 54 +#define MT9P031_COLUMN_START 0x02 +#define MT9P031_COLUMN_START_DEF 16 +#define MT9P031_WINDOW_HEIGHT 0x03 +#define MT9P031_WINDOW_HEIGHT_MAX 1944 +#define MT9P031_WINDOW_HEIGHT_MIN 2 +#define MT9P031_WINDOW_WIDTH 0x04 +#define MT9P031_WINDOW_WIDTH_MAX 2592 +#define MT9P031_WINDOW_WIDTH_MIN 18 +#define MT9P031_H_BLANKING 0x05 +#define MT9P031_H_BLANKING_VALUE 0 +#define MT9P031_V_BLANKING 0x06 +#define MT9P031_V_BLANKING_VALUE 25 +#define MT9P031_OUTPUT_CONTROL 0x07 +#define MT9P031_OUTPUT_CONTROL_CEN 2 +#define MT9P031_OUTPUT_CONTROL_SYN 1 +#define MT9P031_SHUTTER_WIDTH_UPPER 0x08 +#define MT9P031_SHUTTER_WIDTH 0x09 +#define MT9P031_PIXEL_CLOCK_CONTROL 0x0a +#define MT9P031_FRAME_RESTART 0x0b +#define MT9P031_SHUTTER_DELAY 0x0c +#define MT9P031_RST 0x0d +#define MT9P031_RST_ENABLE 1 +#define MT9P031_RST_DISABLE 0 +#define MT9P031_READ_MODE_1 0x1e +#define MT9P031_READ_MODE_2 0x20 +#define MT9P031_READ_MODE_2_ROW_MIR 0x8000 +#define MT9P031_READ_MODE_2_COL_MIR 0x4000 +#define MT9P031_ROW_ADDRESS_MODE 0x22 +#define MT9P031_COLUMN_ADDRESS_MODE 0x23 +#define MT9P031_GLOBAL_GAIN 0x35 + +struct mt9p031 { + struct v4l2_subdev subdev; + struct media_pad pad; + struct v4l2_rect rect; /* Sensor window */ + struct v4l2_mbus_framefmt format; + struct mt9p031_platform_data *pdata; + struct mutex power_lock; /* lock to protect power_count */ + int power_count; + u16 xskip; + u16 yskip; + u16 output_control; + struct regulator *reg_1v8; + struct regulator *reg_2v8; +}; + +static struct mt9p031 *to_mt9p031(const struct i2c_client *client) +{ + return container_of(i2c_get_clientdata(client), struct mt9p031, subdev); +} + +static int reg_read(struct i2c_client *client, const u8 reg) +{ + s32 data = i2c_smbus_read_word_data(client, reg); + return data < 0 ? data : swab16(data); +} + +static int reg_write(struct i2c_client *client, const u8 reg, + const u16 data) +{ + return i2c_smbus_write_word_data(client, reg, swab16(data)); +} + +static int mt9p031_set_output_control(struct mt9p031 *mt9p031, u16 clear, + u16 set) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + u16 value = (mt9p031->output_control & ~clear) | set; + int ret; + + ret = reg_write(client, MT9P031_OUTPUT_CONTROL, value); + if (ret < 0) + return ret; + mt9p031->output_control = value; + return 0; +} + +static int mt9p031_reset(struct i2c_client *client) +{ + struct mt9p031 *mt9p031 = to_mt9p031(client); + int ret; + + /* Disable chip output, synchronous option update */ + ret = reg_write(client, MT9P031_RST, MT9P031_RST_ENABLE); + if (ret < 0) + return ret; + ret = reg_write(client, MT9P031_RST, MT9P031_RST_DISABLE); + if (ret < 0) + return ret; + return mt9p031_set_output_control(mt9p031, + MT9P031_OUTPUT_CONTROL_CEN, 0); +} + +static int mt9p031_power_on(struct mt9p031 *mt9p031) +{ + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + int ret; + + /* Ensure RESET_BAR is low */ + if (mt9p031->pdata->reset) + mt9p031->pdata->reset(&mt9p031->subdev, 1); + /* turn on digital supply first */ + ret = regulator_enable(mt9p031->reg_1v8); + if (ret) { + dev_err(&client->dev, + "Failed to enable 1.8v regulator: %d\n", ret); + return ret; + } + msleep(2); + /* now turn on analog supply */ + ret = regulator_enable(mt9p031->reg_2v8); + if (ret) { + dev_err(&client->dev, + "Failed to enable 2.8v regulator: %d\n", ret); + goto err_2v8; + } + /* Now RESET_BAR must be high */ + if (mt9p031->pdata->reset) { + msleep(2); + mt9p031->pdata->reset(&mt9p031->subdev, 0); + } + + if (mt9p031->pdata->set_xclk) + mt9p031->pdata->set_xclk(&mt9p031->subdev, MT9P031_PIXCLK_FREQ); + + /* soft reset */ + ret = mt9p031_reset(client); + if (ret < 0) { + dev_err(&client->dev, "Failed to reset the camera\n"); + goto err_rst; + } + + return 0; +err_rst: + regulator_disable(mt9p031->reg_2v8); +err_2v8: + regulator_disable(mt9p031->reg_1v8); + return ret; + +} + +static void mt9p031_power_off(struct mt9p031 *mt9p031) +{ + if (mt9p031->pdata->set_xclk) + mt9p031->pdata->set_xclk(&mt9p031->subdev, 0); + if (mt9p031->pdata->reset) { + mt9p031->pdata->reset(&mt9p031->subdev, 1); + msleep(2); + } + regulator_disable(mt9p031->reg_2v8); + msleep(2); + regulator_disable(mt9p031->reg_1v8); +} + +static int mt9p031_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + + if (code->pad || code->index) + return -EINVAL; + + code->code = mt9p031->format.code; + + return 0; +} + +static struct v4l2_mbus_framefmt *mt9p031_get_pad_format( + struct mt9p031 *mt9p031, + struct v4l2_subdev_fh *fh, + unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_format(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9p031->format; + default: + return NULL; + } +} + +static struct v4l2_rect *mt9p031_get_pad_crop(struct mt9p031 *mt9p031, + struct v4l2_subdev_fh *fh, unsigned int pad, u32 which) +{ + switch (which) { + case V4L2_SUBDEV_FORMAT_TRY: + return v4l2_subdev_get_try_crop(fh, pad); + case V4L2_SUBDEV_FORMAT_ACTIVE: + return &mt9p031->rect; + default: + return NULL; + } +} + +static int mt9p031_get_crop(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + struct v4l2_rect *rect = mt9p031_get_pad_crop(mt9p031, fh, crop->pad, + crop->which); + if (!rect) + return -EINVAL; + + crop->rect = *rect; + + return 0; +} + +static u16 mt9p031_skip_for_crop(s32 source, s32 *target, s32 max_skip) +{ + unsigned int skip; + + if (source - source / 4 < *target) { + *target = source; + return 1; + } + + skip = DIV_ROUND_CLOSEST(source, *target); + if (skip > max_skip) + skip = max_skip; + *target = 2 * DIV_ROUND_UP(source, 2 * skip); + + return skip; +} + +static int mt9p031_set_params(struct i2c_client *client, + struct v4l2_rect *rect, u16 xskip, u16 yskip) +{ + struct mt9p031 *mt9p031 = to_mt9p031(client); + int ret; + u16 xbin, ybin; + const u16 hblank = MT9P031_H_BLANKING_VALUE, + vblank = MT9P031_V_BLANKING_VALUE; + __s32 left, top, width, height; + + /* + * TODO: Attention! When implementing horizontal flipping, adjust + * alignment according to R2 "Column Start" description in the datasheet + */ + if (xskip & 1) { + xbin = 1; + left = rect->left & (~3); + } else if (xskip & 2) { + xbin = 2; + left = rect->left & (~7); + } else { + xbin = 4; + left = rect->left & (~15); + } + top = rect->top & (~1); + width = rect->width; + height = rect->height; + + ybin = min(yskip, (u16)4); + + /* Disable register update, reconfigure atomically */ + ret = mt9p031_set_output_control(mt9p031, 0, + MT9P031_OUTPUT_CONTROL_SYN); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "skip %u:%u, rect %ux%u@%u:%u\n", + xskip, yskip, rect->width, rect->height, rect->left, rect->top); + + /* Blanking and start values - default... */ + ret = reg_write(client, MT9P031_H_BLANKING, hblank); + if (ret < 0) + return ret; + ret = reg_write(client, MT9P031_V_BLANKING, vblank); + if (ret < 0) + return ret; + + ret = reg_write(client, MT9P031_COLUMN_ADDRESS_MODE, + ((xbin - 1) << 4) | (xskip - 1)); + if (ret < 0) + return ret; + ret = reg_write(client, MT9P031_ROW_ADDRESS_MODE, + ((ybin - 1) << 4) | (yskip - 1)); + if (ret < 0) + return ret; + + dev_dbg(&client->dev, "new physical left %u, top %u\n", + rect->left, rect->top); + + ret = reg_write(client, MT9P031_COLUMN_START, + rect->left + MT9P031_COLUMN_START_DEF); + if (ret < 0) + return ret; + ret = reg_write(client, MT9P031_ROW_START, + rect->top + MT9P031_ROW_START_DEF); + if (ret < 0) + return ret; + ret = reg_write(client, MT9P031_WINDOW_WIDTH, + rect->width - 1); + if (ret < 0) + return ret; + ret = reg_write(client, MT9P031_WINDOW_HEIGHT, + rect->height - 1); + if (ret < 0) + return ret; + + /* Re-enable register update, commit all changes */ + ret = mt9p031_set_output_control(mt9p031, + MT9P031_OUTPUT_CONTROL_SYN, 0); + if (ret < 0) + return ret; + + mt9p031->xskip = xskip; + mt9p031->yskip = yskip; + return ret; +} + +static int mt9p031_set_crop(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_crop *crop) +{ + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + struct v4l2_mbus_framefmt *f; + struct v4l2_rect *c; + struct v4l2_rect rect; + u16 xskip, yskip; + s32 width, height; + + dev_dbg(mt9p031->subdev.v4l2_dev->dev, "%s(%ux%u@%u:%u : %u)\n", + __func__, crop->rect.width, crop->rect.height, + crop->rect.left, crop->rect.top, crop->which); + + /* + * Clamp the crop rectangle boundaries and align them to a multiple of 2 + * pixels. + */ + rect.width = ALIGN(clamp(crop->rect.width, + MT9P031_WINDOW_WIDTH_MIN, MT9P031_WINDOW_WIDTH_MAX), 2); + rect.height = ALIGN(clamp(crop->rect.height, + MT9P031_WINDOW_HEIGHT_MIN, MT9P031_WINDOW_HEIGHT_MAX), 2); + rect.left = ALIGN(clamp(crop->rect.left, + 0, MT9P031_WINDOW_WIDTH_MAX - rect.width), 2); + rect.top = ALIGN(clamp(crop->rect.top, + 0, MT9P031_WINDOW_HEIGHT_MAX - rect.height), 2); + + c = mt9p031_get_pad_crop(mt9p031, fh, crop->pad, crop->which); + + if (rect.width != c->width || rect.height != c->height) { + /* + * Reset the output image size if the crop rectangle size has + * been modified. + */ + f = mt9p031_get_pad_format(mt9p031, fh, crop->pad, + crop->which); + width = f->width; + height = f->height; + + xskip = mt9p031_skip_for_crop(rect.width, &width, 7); + yskip = mt9p031_skip_for_crop(rect.height, &height, 8); + } else { + xskip = mt9p031->xskip; + yskip = mt9p031->yskip; + f = NULL; + } + if (f) { + f->width = width; + f->height = height; + } + + *c = rect; + crop->rect = rect; + + mt9p031->xskip = xskip; + mt9p031->yskip = yskip; + mt9p031->rect = *c; + return 0; +} + +static int mt9p031_get_format(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + + fmt->format = + *mt9p031_get_pad_format(mt9p031, fh, fmt->pad, fmt->which); + return 0; +} + +static u16 mt9p031_skip_for_scale(s32 *source, s32 target, + s32 max_skip, s32 max) +{ + unsigned int skip; + + if (*source - *source / 4 < target) { + *source = target; + return 1; + } + + skip = min(max, *source + target / 2) / target; + if (skip > max_skip) + skip = max_skip; + *source = target * skip; + + return skip; +} + +static int mt9p031_fmt_validate(struct v4l2_subdev *sd, + struct v4l2_subdev_format *fmt) +{ + struct v4l2_mbus_framefmt *format = &fmt->format; + + /* Hardcode code and colorspace as sensor only supports one */ + format->code = V4L2_MBUS_FMT_SGRBG12_1X12; + format->colorspace = V4L2_COLORSPACE_SRGB; + + format->width = clamp_t(int, ALIGN(format->width, 2), 2, + MT9P031_WINDOW_WIDTH_MAX); + format->height = clamp_t(int, ALIGN(format->height, 2), 2, + MT9P031_WINDOW_HEIGHT_MAX); + format->field = V4L2_FIELD_NONE; + + return 0; +} + +static int mt9p031_set_format(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *format) +{ + struct v4l2_subdev_format sdf = *format; + struct v4l2_mbus_framefmt *__format, *format_bak = &sdf.format; + struct v4l2_rect *__crop, rect; + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + u16 xskip, yskip; + int ret; + + __crop = mt9p031_get_pad_crop(mt9p031, fh, format->pad, format->which); + + ret = mt9p031_fmt_validate(sd, &sdf); + if (ret < 0) + return ret; + rect.width = __crop->width; + rect.height = __crop->height; + + xskip = mt9p031_skip_for_scale(&rect.width, format_bak->width, 7, + MT9P031_WINDOW_WIDTH_MAX); + if (rect.width + __crop->left > MT9P031_WINDOW_WIDTH_MAX) + rect.left = (MT9P031_WINDOW_WIDTH_MAX - rect.width) / 2; + else + rect.left = __crop->left; + yskip = mt9p031_skip_for_scale(&rect.height, format_bak->height, 8, + MT9P031_WINDOW_HEIGHT_MAX); + if (rect.height + __crop->top > MT9P031_WINDOW_HEIGHT_MAX) + rect.top = (MT9P031_WINDOW_HEIGHT_MAX - rect.height) / 2; + else + rect.top = __crop->top; + + dev_dbg(mt9p031->subdev.v4l2_dev->dev, "%s(%ux%u : %u)\n", __func__, + format_bak->width, format_bak->height, format->which); + if (__crop) + *__crop = rect; + + __format = mt9p031_get_pad_format(mt9p031, fh, format->pad, format->which); + *__format = *format_bak; + format->format = *format_bak; + + mt9p031->xskip = xskip; + mt9p031->yskip = yskip; + mt9p031->rect = *__crop; + return 0; +} + +static int mt9p031_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + struct v4l2_rect rect = mt9p031->rect; + u16 xskip = mt9p031->xskip; + u16 yskip = mt9p031->yskip; + int ret; + + if (enable) { + ret = mt9p031_set_params(client, &rect, xskip, yskip); + if (ret < 0) + return ret; + /* Switch to master "normal" mode */ + ret = mt9p031_set_output_control(mt9p031, 0, + MT9P031_OUTPUT_CONTROL_CEN); + } else { + /* Stop sensor readout */ + ret = mt9p031_set_output_control(mt9p031, + MT9P031_OUTPUT_CONTROL_CEN, 0); + } + return ret; +} + +static int mt9p031_video_probe(struct i2c_client *client) +{ + s32 data; + + /* Read out the chip version register */ + data = reg_read(client, MT9P031_CHIP_VERSION); + if (data != MT9P031_CHIP_VERSION_VALUE) { + dev_err(&client->dev, + "No MT9P031 chip detected, register read %x\n", data); + return -ENODEV; + } + + dev_info(&client->dev, "Detected a MT9P031 chip ID %x\n", data); + + return 0; +} + +static int mt9p031_set_power(struct v4l2_subdev *sd, int on) +{ + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + int ret = 0; + + mutex_lock(&mt9p031->power_lock); + + /* + * If the power count is modified from 0 to != 0 or from != 0 to 0, + * update the power state. + */ + if (mt9p031->power_count == !on) { + if (on) { + ret = mt9p031_power_on(mt9p031); + if (ret) + goto out; + } else { + mt9p031_power_off(mt9p031); + } + } + + /* Update the power count. */ + mt9p031->power_count += on ? 1 : -1; + WARN_ON(mt9p031->power_count < 0); + +out: + mutex_unlock(&mt9p031->power_lock); + return ret; +} + +static int mt9p031_registered(struct v4l2_subdev *sd) +{ + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + struct i2c_client *client = v4l2_get_subdevdata(&mt9p031->subdev); + int ret; + + ret = mt9p031_set_power(&mt9p031->subdev, 1); + if (ret) { + dev_err(&client->dev, + "Failed to power on device: %d\n", ret); + return ret; + } + ret = mt9p031_video_probe(client); + if (ret) + goto err; + mt9p031_set_power(&mt9p031->subdev, 0); + + return 0; +err: + mt9p031_set_power(&mt9p031->subdev, 0); + return ret; +} + +static int mt9p031_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct mt9p031 *mt9p031; + mt9p031 = container_of(sd, struct mt9p031, subdev); + + mt9p031->rect.width = MT9P031_WINDOW_WIDTH_MAX; + mt9p031->rect.height = MT9P031_WINDOW_HEIGHT_MAX; + mt9p031->rect.left = MT9P031_COLUMN_START_DEF; + mt9p031->rect.top = MT9P031_ROW_START_DEF; + + mt9p031->format.code = V4L2_MBUS_FMT_SGRBG12_1X12; + mt9p031->format.width = MT9P031_WINDOW_WIDTH_MAX; + mt9p031->format.height = MT9P031_WINDOW_HEIGHT_MAX; + mt9p031->format.field = V4L2_FIELD_NONE; + mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB; + + mt9p031->xskip = 1; + mt9p031->yskip = 1; + return mt9p031_set_power(sd, 1); +} + +static int mt9p031_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + return mt9p031_set_power(sd, 0); +} + +static struct v4l2_subdev_core_ops mt9p031_subdev_core_ops = { + .s_power = mt9p031_set_power, +}; + +static struct v4l2_subdev_video_ops mt9p031_subdev_video_ops = { + .s_stream = mt9p031_s_stream, +}; + +static struct v4l2_subdev_pad_ops mt9p031_subdev_pad_ops = { + .enum_mbus_code = mt9p031_enum_mbus_code, + .get_fmt = mt9p031_get_format, + .set_fmt = mt9p031_set_format, + .get_crop = mt9p031_get_crop, + .set_crop = mt9p031_set_crop, +}; + +static struct v4l2_subdev_ops mt9p031_subdev_ops = { + .core = &mt9p031_subdev_core_ops, + .video = &mt9p031_subdev_video_ops, + .pad = &mt9p031_subdev_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops mt9p031_subdev_internal_ops = { + .registered = mt9p031_registered, + .open = mt9p031_open, + .close = mt9p031_close, +}; + +static int mt9p031_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ + struct mt9p031 *mt9p031; + struct mt9p031_platform_data *pdata = client->dev.platform_data; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + int ret; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { + dev_warn(&adapter->dev, + "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); + return -EIO; + } + + mt9p031 = kzalloc(sizeof(struct mt9p031), GFP_KERNEL); + if (!mt9p031) + return -ENOMEM; + + mutex_init(&mt9p031->power_lock); + v4l2_i2c_subdev_init(&mt9p031->subdev, client, &mt9p031_subdev_ops); + mt9p031->subdev.internal_ops = &mt9p031_subdev_internal_ops; + + mt9p031->pdata = pdata; + + mt9p031->reg_1v8 = regulator_get(NULL, "cam_1v8"); + if (IS_ERR(mt9p031->reg_1v8)) { + ret = PTR_ERR(mt9p031->reg_1v8); + dev_err(mt9p031->subdev.v4l2_dev->dev, + "Failed 1.8v regulator: %d\n", ret); + goto err_e1v8; + } + + mt9p031->reg_2v8 = regulator_get(NULL, "cam_2v8"); + if (IS_ERR(mt9p031->reg_2v8)) { + ret = PTR_ERR(mt9p031->reg_2v8); + dev_err(mt9p031->subdev.v4l2_dev->dev, + "Failed 2.8v regulator: %d\n", ret); + goto err_e2v8; + } + mt9p031->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&mt9p031->subdev.entity, 1, &mt9p031->pad, 0); + if (ret) + goto err_e2v8; + + mt9p031->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + return 0; +err_e2v8: + regulator_put(mt9p031->reg_1v8); +err_e1v8: + kfree(mt9p031); + return ret; +} + +static int mt9p031_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct mt9p031 *mt9p031 = container_of(sd, struct mt9p031, subdev); + + v4l2_device_unregister_subdev(sd); + media_entity_cleanup(&sd->entity); + regulator_put(mt9p031->reg_2v8); + regulator_put(mt9p031->reg_1v8); + kfree(mt9p031); + + return 0; +} + +static const struct i2c_device_id mt9p031_id[] = { + { "mt9p031", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mt9p031_id); + +static struct i2c_driver mt9p031_i2c_driver = { + .driver = { + .name = "mt9p031", + }, + .probe = mt9p031_probe, + .remove = mt9p031_remove, + .id_table = mt9p031_id, +}; + +static int __init mt9p031_mod_init(void) +{ + return i2c_add_driver(&mt9p031_i2c_driver); +} + +static void __exit mt9p031_mod_exit(void) +{ + i2c_del_driver(&mt9p031_i2c_driver); +} + +module_init(mt9p031_mod_init); +module_exit(mt9p031_mod_exit); + +MODULE_DESCRIPTION("Aptina MT9P031 Camera driver"); +MODULE_AUTHOR("Bastian Hecht <hechtb@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/include/media/mt9p031.h b/include/media/mt9p031.h new file mode 100644 index 0000000..ad37eb3 --- /dev/null +++ b/include/media/mt9p031.h @@ -0,0 +1,11 @@ +#ifndef MT9P031_H +#define MT9P031_H + +struct v4l2_subdev; + +struct mt9p031_platform_data { + int (*set_xclk)(struct v4l2_subdev *subdev, int hz); + int (*reset)(struct v4l2_subdev *subdev, int active); +}; + +#endif
It includes several fixes pointed out by Laurent Pinchart. However, the BUG which shows artifacts in the image (horizontal lines) still persists. It won't happen if 1v8 regulator is not disabled (i.e. comment line where it is disabled in function "mt9p031_power_off"). I know there can be some other details to fix but I would like someone could help in the power management issue. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> --- drivers/media/video/Kconfig | 7 + drivers/media/video/Makefile | 1 + drivers/media/video/mt9p031.c | 752 +++++++++++++++++++++++++++++++++++++++++ include/media/mt9p031.h | 11 + 4 files changed, 771 insertions(+), 0 deletions(-) create mode 100644 drivers/media/video/mt9p031.c create mode 100644 include/media/mt9p031.h