[1/4,v3] drm: Add support of ARC PGU display controller

Commit Message

Alexey Brodkin March 11, 2016, 3:42 p.m. UTC

ARC PGU could be found on some development boards from Synopsys.
This is a simple byte streamer that reads data from a framebuffer
and sends data to the single encoder.

Signed-off-by: Alexey Brodkin <[e-mail]>
Cc: David Airlie <[e-mail]>
Cc: [e-mail]
Cc: [e-mail]
Cc: Jose Abreu <[e-mail]>
---

Changes v2 -> v3:
 * Improved failure path if arcpgu_connector wasn't allocated (thanks Jose).
 * Fixed driver building as module (reported by 0-DAY kernel test infrastruct.)
 * Implemented uncached mapping of user-space FB pages.

No changes v1 -> v2.

 drivers/gpu/drm/Kconfig            |   2 +
 drivers/gpu/drm/Makefile           |   1 +
 drivers/gpu/drm/arc/Kconfig        |  10 ++
 drivers/gpu/drm/arc/Makefile       |   2 +
 drivers/gpu/drm/arc/arcpgu.h       |  50 +++++++
 drivers/gpu/drm/arc/arcpgu_crtc.c  | 274 +++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/arc/arcpgu_drv.c   | 252 ++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/arc/arcpgu_fbdev.c | 245 +++++++++++++++++++++++++++++++++
 drivers/gpu/drm/arc/arcpgu_hdmi.c  | 207 ++++++++++++++++++++++++++++
 drivers/gpu/drm/arc/arcpgu_regs.h  |  36 +++++
 10 files changed, 1079 insertions(+)
 create mode 100644 drivers/gpu/drm/arc/Kconfig
 create mode 100644 drivers/gpu/drm/arc/Makefile
 create mode 100644 drivers/gpu/drm/arc/arcpgu.h
 create mode 100644 drivers/gpu/drm/arc/arcpgu_crtc.c
 create mode 100644 drivers/gpu/drm/arc/arcpgu_drv.c
 create mode 100644 drivers/gpu/drm/arc/arcpgu_fbdev.c
 create mode 100644 drivers/gpu/drm/arc/arcpgu_hdmi.c
 create mode 100644 drivers/gpu/drm/arc/arcpgu_regs.h

Comments

Daniel Vetter March 14, 2016, 7 a.m. UTC | #1

On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> ARC PGU could be found on some development boards from Synopsys.
> This is a simple byte streamer that reads data from a framebuffer
> and sends data to the single encoder.
> 
> Signed-off-by: Alexey Brodkin <[e-mail]>
> Cc: David Airlie <[e-mail]>
> Cc: [e-mail]
> Cc: [e-mail]
> Cc: Jose Abreu <[e-mail]>
> ---
> 
> Changes v2 -> v3:
>  * Improved failure path if arcpgu_connector wasn't allocated (thanks Jose).
>  * Fixed driver building as module (reported by 0-DAY kernel test infrastruct.)
>  * Implemented uncached mapping of user-space FB pages.
> 
> No changes v1 -> v2.
> 

Bunch of comments below to update your driver to latest styles and best
practices.

Cheers, Daniel

>  drivers/gpu/drm/Kconfig            |   2 +
>  drivers/gpu/drm/Makefile           |   1 +
>  drivers/gpu/drm/arc/Kconfig        |  10 ++
>  drivers/gpu/drm/arc/Makefile       |   2 +
>  drivers/gpu/drm/arc/arcpgu.h       |  50 +++++++
>  drivers/gpu/drm/arc/arcpgu_crtc.c  | 274 +++++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/arc/arcpgu_drv.c   | 252 ++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/arc/arcpgu_fbdev.c | 245 +++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/arc/arcpgu_hdmi.c  | 207 ++++++++++++++++++++++++++++
>  drivers/gpu/drm/arc/arcpgu_regs.h  |  36 +++++
>  10 files changed, 1079 insertions(+)
>  create mode 100644 drivers/gpu/drm/arc/Kconfig
>  create mode 100644 drivers/gpu/drm/arc/Makefile
>  create mode 100644 drivers/gpu/drm/arc/arcpgu.h
>  create mode 100644 drivers/gpu/drm/arc/arcpgu_crtc.c
>  create mode 100644 drivers/gpu/drm/arc/arcpgu_drv.c
>  create mode 100644 drivers/gpu/drm/arc/arcpgu_fbdev.c
>  create mode 100644 drivers/gpu/drm/arc/arcpgu_hdmi.c
>  create mode 100644 drivers/gpu/drm/arc/arcpgu_regs.h
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index f2a74d0..9e4f2f1 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -281,3 +281,5 @@ source "drivers/gpu/drm/imx/Kconfig"
>  source "drivers/gpu/drm/vc4/Kconfig"
>  
>  source "drivers/gpu/drm/etnaviv/Kconfig"
> +
> +source "drivers/gpu/drm/arc/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 6eb94fc..c338d04 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -78,3 +78,4 @@ obj-y			+= panel/
>  obj-y			+= bridge/
>  obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
>  obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
> +obj-$(CONFIG_DRM_ARCPGU)+= arc/
> diff --git a/drivers/gpu/drm/arc/Kconfig b/drivers/gpu/drm/arc/Kconfig
> new file mode 100644
> index 0000000..f9a13b6
> --- /dev/null
> +++ b/drivers/gpu/drm/arc/Kconfig
> @@ -0,0 +1,10 @@
> +config DRM_ARCPGU
> +	tristate "ARC PGU"
> +	depends on DRM && OF
> +	select DRM_KMS_CMA_HELPER
> +	select DRM_KMS_FB_HELPER
> +	select DRM_KMS_HELPER
> +	help
> +	  Choose this option if you have an ARC PGU controller.
> +
> +	  If M is selected the module will be called arcpgu.
> diff --git a/drivers/gpu/drm/arc/Makefile b/drivers/gpu/drm/arc/Makefile
> new file mode 100644
> index 0000000..736ee6f
> --- /dev/null
> +++ b/drivers/gpu/drm/arc/Makefile
> @@ -0,0 +1,2 @@
> +arcpgu-y := arcpgu_crtc.o arcpgu_hdmi.o arcpgu_fbdev.o arcpgu_drv.o
> +obj-$(CONFIG_DRM_ARCPGU) += arcpgu.o
> diff --git a/drivers/gpu/drm/arc/arcpgu.h b/drivers/gpu/drm/arc/arcpgu.h
> new file mode 100644
> index 0000000..86574b6
> --- /dev/null
> +++ b/drivers/gpu/drm/arc/arcpgu.h
> @@ -0,0 +1,50 @@
> +/*
> + * ARC PGU DRM driver.
> + *
> + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef _ARCPGU_H_
> +#define _ARCPGU_H_
> +
> +struct arcpgu_drm_private {
> +	void __iomem		*regs;
> +	struct clk		*clk;
> +	struct drm_fbdev_cma	*fbdev;
> +	struct drm_framebuffer	*fb;
> +	struct list_head	event_list;
> +	struct drm_crtc		crtc;
> +	struct drm_plane	*plane;
> +};
> +
> +#define crtc_to_arcpgu_priv(x) container_of(x, struct arcpgu_drm_private, crtc)
> +
> +static inline void arc_pgu_write(struct arcpgu_drm_private *arcpgu,
> +				 unsigned int reg, u32 value)
> +{
> +	iowrite32(value, arcpgu->regs + reg);
> +}
> +
> +static inline u32 arc_pgu_read(struct arcpgu_drm_private *arcpgu,
> +			       unsigned int reg)
> +{
> +	return ioread32(arcpgu->regs + reg);
> +}
> +
> +int arc_pgu_setup_crtc(struct drm_device *dev);
> +int arcpgu_drm_hdmi_init(struct drm_device *drm, struct device_node *np);
> +struct drm_fbdev_cma *arcpgu_fbdev_cma_init(struct drm_device *dev,
> +	unsigned int preferred_bpp, unsigned int num_crtc,
> +	unsigned int max_conn_count);
> +
> +#endif
> diff --git a/drivers/gpu/drm/arc/arcpgu_crtc.c b/drivers/gpu/drm/arc/arcpgu_crtc.c
> new file mode 100644
> index 0000000..0fe5c8a
> --- /dev/null
> +++ b/drivers/gpu/drm/arc/arcpgu_crtc.c
> @@ -0,0 +1,274 @@
> +/*
> + * ARC PGU DRM driver.
> + *
> + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_plane_helper.h>
> +#include <linux/clk.h>
> +#include <linux/platform_data/simplefb.h>
> +
> +#include "arcpgu.h"
> +#include "arcpgu_regs.h"
> +
> +#define ENCODE_PGU_XY(x, y)	((((x) - 1) << 16) | ((y) - 1))
> +
> +static struct simplefb_format supported_formats[] = {
> +	{ "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0}, DRM_FORMAT_RGB565 },
> +	{ "r8g8b8", 24, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_RGB888 },
> +};
> +
> +static void arc_pgu_set_pxl_fmt(struct drm_crtc *crtc)
> +{
> +	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> +	uint32_t pixel_format = crtc->primary->state->fb->pixel_format;
> +	struct simplefb_format *format = NULL;
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(supported_formats); i++) {
> +		if (supported_formats[i].fourcc == pixel_format)
> +			format = &supported_formats[i];
> +	}
> +
> +	if (WARN_ON(!format))
> +		return;
> +
> +	if (format->fourcc == DRM_FORMAT_RGB888)
> +		arc_pgu_write(arcpgu, ARCPGU_REG_CTRL,
> +			      arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) |
> +					   ARCPGU_MODE_RGB888_MASK);
> +
> +}
> +
> +static const struct drm_crtc_funcs arc_pgu_crtc_funcs = {
> +	.destroy = drm_crtc_cleanup,
> +	.set_config = drm_atomic_helper_set_config,
> +	.page_flip = drm_atomic_helper_page_flip,
> +	.reset = drm_atomic_helper_crtc_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> +};
> +
> +static void arc_pgu_crtc_mode_set_nofb(struct drm_crtc *crtc)
> +{
> +	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> +	struct drm_display_mode *m = &crtc->state->adjusted_mode;
> +
> +	arc_pgu_write(arcpgu, ARCPGU_REG_FMT,
> +		      ENCODE_PGU_XY(m->crtc_htotal, m->crtc_vtotal));
> +
> +	arc_pgu_write(arcpgu, ARCPGU_REG_HSYNC,
> +		      ENCODE_PGU_XY(m->crtc_hsync_start - m->crtc_hdisplay,
> +				    m->crtc_hsync_end - m->crtc_hdisplay));
> +
> +	arc_pgu_write(arcpgu, ARCPGU_REG_VSYNC,
> +		      ENCODE_PGU_XY(m->crtc_vsync_start - m->crtc_vdisplay,
> +				    m->crtc_vsync_end - m->crtc_vdisplay));
> +
> +	arc_pgu_write(arcpgu, ARCPGU_REG_ACTIVE,
> +		      ENCODE_PGU_XY(m->crtc_hblank_end - m->crtc_hblank_start,
> +				    m->crtc_vblank_end - m->crtc_vblank_start));
> +
> +	arc_pgu_write(arcpgu, ARCPGU_REG_STRIDE, 0);
> +	arc_pgu_write(arcpgu, ARCPGU_REG_START_SET, 1);
> +
> +	arc_pgu_set_pxl_fmt(crtc);
> +
> +	clk_set_rate(arcpgu->clk, m->crtc_clock * 1000);
> +}
> +
> +static void arc_pgu_crtc_enable(struct drm_crtc *crtc)
> +{
> +	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> +
> +	clk_prepare_enable(arcpgu->clk);
> +	arc_pgu_write(arcpgu, ARCPGU_REG_CTRL,
> +		      arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) |
> +		      ARCPGU_CTRL_ENABLE_MASK);
> +}
> +
> +static void arc_pgu_crtc_disable(struct drm_crtc *crtc)
> +{
> +	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> +
> +	if (!crtc->primary->fb)
> +		return;
> +
> +	clk_disable_unprepare(arcpgu->clk);
> +	arc_pgu_write(arcpgu, ARCPGU_REG_CTRL,
> +			      arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) &
> +			      ~ARCPGU_CTRL_ENABLE_MASK);
> +}
> +
> +static int arc_pgu_crtc_atomic_check(struct drm_crtc *crtc,
> +				     struct drm_crtc_state *state)
> +{
> +	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> +	struct drm_display_mode *mode = &state->adjusted_mode;
> +	long rate, clk_rate = mode->clock * 1000;
> +
> +	rate = clk_round_rate(arcpgu->clk, clk_rate);
> +	if (rate != clk_rate)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static void arc_pgu_crtc_atomic_begin(struct drm_crtc *crtc,
> +				      struct drm_crtc_state *state)
> +{
> +	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
> +	unsigned long flags;
> +
> +	if (crtc->state->event) {
> +		struct drm_pending_vblank_event *event = crtc->state->event;
> +
> +		crtc->state->event = NULL;
> +		event->pipe = drm_crtc_index(crtc);
> +
> +		WARN_ON(drm_crtc_vblank_get(crtc) != 0);
> +
> +		spin_lock_irqsave(&crtc->dev->event_lock, flags);
> +		list_add_tail(&event->base.link, &arcpgu->event_list);
> +		spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
> +	}
> +}
> +
> +static void arc_pgu_crtc_atomic_flush(struct drm_crtc *crtc,
> +				      struct drm_crtc_state *state)
> +{
> +}
> +
> +static bool arc_pgu_crtc_mode_fixup(struct drm_crtc *crtc,
> +				    const struct drm_display_mode *mode,
> +				    struct drm_display_mode *adjusted_mode)
> +{
> +	return true;
> +}

You can drop the above 2 dummy functions.

> +
> +static const struct drm_crtc_helper_funcs arc_pgu_crtc_helper_funcs = {
> +	.mode_fixup	= arc_pgu_crtc_mode_fixup,
> +	.mode_set	= drm_helper_crtc_mode_set,
> +	.mode_set_base	= drm_helper_crtc_mode_set_base,
> +	.mode_set_nofb	= arc_pgu_crtc_mode_set_nofb,
> +	.enable		= arc_pgu_crtc_enable,
> +	.disable	= arc_pgu_crtc_disable,
> +	.prepare	= arc_pgu_crtc_disable,
> +	.commit		= arc_pgu_crtc_enable,
> +	.atomic_check	= arc_pgu_crtc_atomic_check,
> +	.atomic_begin	= arc_pgu_crtc_atomic_begin,
> +	.atomic_flush	= arc_pgu_crtc_atomic_flush,
> +};
> +
> +static int arc_pgu_plane_atomic_check(struct drm_plane *plane,
> +				      struct drm_plane_state *state)
> +{
> +	return 0;
> +}

You don't need dummy functions for this.

> +
> +static void arc_pgu_plane_atomic_update(struct drm_plane *plane,
> +					struct drm_plane_state *state)
> +{
> +	struct arcpgu_drm_private *arcpgu;
> +	struct drm_gem_cma_object *gem;
> +
> +	if (!plane->state->crtc || !plane->state->fb)
> +		return;
> +
> +	arcpgu = crtc_to_arcpgu_priv(plane->state->crtc);
> +	gem = drm_fb_cma_get_gem_obj(plane->state->fb, 0);
> +	arc_pgu_write(arcpgu, ARCPGU_REG_BUF0_ADDR, gem->paddr);
> +}
> +
> +static const struct drm_plane_helper_funcs arc_pgu_plane_helper_funcs = {
> +	.prepare_fb = NULL,
> +	.cleanup_fb = NULL,
> +	.atomic_check = arc_pgu_plane_atomic_check,
> +	.atomic_update = arc_pgu_plane_atomic_update,
> +};
> +
> +static void arc_pgu_plane_destroy(struct drm_plane *plane)
> +{
> +	drm_plane_helper_disable(plane);
> +	drm_plane_cleanup(plane);
> +}
> +
> +static const struct drm_plane_funcs arc_pgu_plane_funcs = {
> +	.update_plane		= drm_atomic_helper_update_plane,
> +	.disable_plane		= drm_atomic_helper_disable_plane,
> +	.destroy		= arc_pgu_plane_destroy,
> +	.reset			= drm_atomic_helper_plane_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> +	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
> +};
> +
> +static struct drm_plane *arc_pgu_plane_init(struct drm_device *drm)
> +{
> +	struct arcpgu_drm_private *arcpgu = drm->dev_private;
> +	struct drm_plane *plane = NULL;
> +	u32 formats[ARRAY_SIZE(supported_formats)], i;
> +	int ret;
> +
> +	plane = devm_kzalloc(drm->dev, sizeof(*plane), GFP_KERNEL);
> +	if (!plane)
> +		return ERR_PTR(-ENOMEM);
> +
> +	for (i = 0; i < ARRAY_SIZE(supported_formats); i++)
> +		formats[i] = supported_formats[i].fourcc;
> +
> +	ret = drm_universal_plane_init(drm, plane, 0xff, &arc_pgu_plane_funcs,
> +				       formats, ARRAY_SIZE(formats),
> +				       DRM_PLANE_TYPE_PRIMARY, NULL);
> +	if (ret)
> +		return ERR_PTR(ret);
> +
> +	drm_plane_helper_add(plane, &arc_pgu_plane_helper_funcs);
> +	arcpgu->plane = plane;
> +
> +	return plane;
> +}
> +
> +void arc_pgu_crtc_suspend(struct drm_crtc *crtc)
> +{
> +	arc_pgu_crtc_disable(crtc);
> +}
> +
> +void arc_pgu_crtc_resume(struct drm_crtc *crtc)
> +{
> +	arc_pgu_crtc_enable(crtc);
> +}

Please use the atomic suspend/resume helper that Thierry recently merged.
See the kerneldoc of drm_atomic_helper_suspend as a starting point for how
it works and how it's supposed to be used.

> +
> +int arc_pgu_setup_crtc(struct drm_device *drm)
> +{
> +	struct arcpgu_drm_private *arcpgu = drm->dev_private;
> +	struct drm_plane *primary;
> +	int ret;
> +
> +	primary = arc_pgu_plane_init(drm);
> +	if (IS_ERR(primary))
> +		return PTR_ERR(primary);
> +
> +	ret = drm_crtc_init_with_planes(drm, &arcpgu->crtc, primary, NULL,
> +					&arc_pgu_crtc_funcs, NULL);
> +	if (ret) {
> +		arc_pgu_plane_destroy(primary);
> +		return ret;
> +	}
> +
> +	drm_crtc_helper_add(&arcpgu->crtc, &arc_pgu_crtc_helper_funcs);
> +	return 0;
> +}
> diff --git a/drivers/gpu/drm/arc/arcpgu_drv.c b/drivers/gpu/drm/arc/arcpgu_drv.c
> new file mode 100644
> index 0000000..d47481d
> --- /dev/null
> +++ b/drivers/gpu/drm/arc/arcpgu_drv.c
> @@ -0,0 +1,252 @@
> +/*
> + * ARC PGU DRM driver.
> + *
> + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_atomic_helper.h>
> +
> +#include "arcpgu.h"
> +#include "arcpgu_regs.h"
> +
> +static void arcpgu_fb_output_poll_changed(struct drm_device *dev)
> +{
> +	struct arcpgu_drm_private *arcpgu = dev->dev_private;
> +
> +	if (arcpgu->fbdev)
> +		drm_fbdev_cma_hotplug_event(arcpgu->fbdev);
> +}
> +
> +static int arcpgu_atomic_commit(struct drm_device *dev,
> +				    struct drm_atomic_state *state, bool async)
> +{
> +	return drm_atomic_helper_commit(dev, state, false);

Note that this isn't really async if you ever get around to implement
fence support or vblank support. Just fyi.

> +}
> +
> +static struct drm_mode_config_funcs arcpgu_drm_modecfg_funcs = {
> +	.fb_create  = drm_fb_cma_create,
> +	.output_poll_changed = arcpgu_fb_output_poll_changed,
> +	.atomic_check = drm_atomic_helper_check,
> +	.atomic_commit = arcpgu_atomic_commit,
> +};
> +
> +static void arcpgu_setup_mode_config(struct drm_device *drm)
> +{
> +	drm_mode_config_init(drm);
> +	drm->mode_config.min_width = 0;
> +	drm->mode_config.min_height = 0;
> +	drm->mode_config.max_width = 1920;
> +	drm->mode_config.max_height = 1080;
> +	drm->mode_config.funcs = &arcpgu_drm_modecfg_funcs;
> +}
> +
> +int arcpgu_gem_mmap(struct file *filp, struct vm_area_struct *vma)
> +{
> +	int ret;
> +
> +	ret = drm_gem_mmap(filp, vma);
> +	if (ret)
> +		return ret;
> +
> +	vma->vm_page_prot = pgprot_noncached(vm_get_page_prot(vma->vm_flags));
> +	return 0;
> +}
> +
> +static const struct file_operations arcpgu_drm_ops = {
> +	.owner = THIS_MODULE,
> +	.open = drm_open,
> +	.release = drm_release,
> +	.unlocked_ioctl = drm_ioctl,
> +#ifdef CONFIG_COMPAT
> +	.compat_ioctl = drm_compat_ioctl,
> +#endif
> +	.poll = drm_poll,
> +	.read = drm_read,
> +	.llseek = no_llseek,
> +	.mmap = arcpgu_gem_mmap,
> +};
> +
> +static void arcpgu_preclose(struct drm_device *drm, struct drm_file *file)
> +{
> +	struct arcpgu_drm_private *arcpgu = drm->dev_private;
> +	struct drm_pending_vblank_event *e, *t;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&drm->event_lock, flags);
> +	list_for_each_entry_safe(e, t, &arcpgu->event_list, base.link) {
> +		if (e->base.file_priv != file)
> +			continue;
> +		list_del(&e->base.link);
> +		e->base.destroy(&e->base);
> +	}
> +	spin_unlock_irqrestore(&drm->event_lock, flags);
> +}
> +
> +static void arcpgu_lastclose(struct drm_device *drm)
> +{
> +	struct arcpgu_drm_private *arcpgu = drm->dev_private;
> +
> +	drm_fbdev_cma_restore_mode(arcpgu->fbdev);
> +}
> +
> +static int arcpgu_load(struct drm_device *drm, unsigned long flags)
> +{
> +	struct platform_device *pdev = drm->platformdev;
> +	struct arcpgu_drm_private *arcpgu;
> +	struct device_node *encoder_node;
> +	struct resource *res;
> +	int ret;
> +
> +	arcpgu = devm_kzalloc(&pdev->dev, sizeof(*arcpgu), GFP_KERNEL);
> +	if (arcpgu == NULL)
> +		return -ENOMEM;
> +
> +	drm->dev_private = arcpgu;
> +
> +	arcpgu->clk = devm_clk_get(drm->dev, "pxlclk");
> +	if (IS_ERR(arcpgu->clk))
> +		return PTR_ERR(arcpgu->clk);
> +
> +	INIT_LIST_HEAD(&arcpgu->event_list);
> +
> +	arcpgu_setup_mode_config(drm);
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	arcpgu->regs = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(arcpgu->regs)) {
> +		dev_err(drm->dev, "Could not remap IO mem\n");
> +		return PTR_ERR(arcpgu->regs);
> +	}
> +
> +	dev_info(drm->dev, "arc_pgu ID: 0x%x\n",
> +		 arc_pgu_read(arcpgu, ARCPGU_REG_ID));
> +
> +	if (dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32)))
> +		return -ENODEV;
> +
> +	if (arc_pgu_setup_crtc(drm) < 0)
> +		return -ENODEV;
> +
> +	/* find the encoder node and initialize it */
> +	encoder_node = of_parse_phandle(drm->dev->of_node, "encoder-slave", 0);
> +	if (!encoder_node) {
> +		dev_err(drm->dev, "failed to get an encoder slave node\n");
> +		return -ENODEV;
> +	}
> +
> +	ret = arcpgu_drm_hdmi_init(drm, encoder_node);
> +	if (ret < 0)
> +		return ret;
> +
> +	drm_mode_config_reset(drm);
> +	drm_kms_helper_poll_init(drm);
> +
> +	arcpgu->fbdev = arcpgu_fbdev_cma_init(drm, 16,
> +					      drm->mode_config.num_crtc,
> +					      drm->mode_config.num_connector);
> +	if (IS_ERR(arcpgu->fbdev)) {
> +		ret = PTR_ERR(arcpgu->fbdev);
> +		arcpgu->fbdev = NULL;
> +		return -ENODEV;
> +	}
> +
> +	platform_set_drvdata(pdev, arcpgu);
> +	return 0;
> +}
> +
> +int arcpgu_unload(struct drm_device *drm)
> +{
> +	struct arcpgu_drm_private *arcpgu = drm->dev_private;
> +
> +	if (arcpgu->fbdev) {
> +		drm_fbdev_cma_fini(arcpgu->fbdev);
> +		arcpgu->fbdev = NULL;
> +	}
> +	drm_kms_helper_poll_fini(drm);
> +	drm_vblank_cleanup(drm);
> +	drm_mode_config_cleanup(drm);
> +
> +	return 0;
> +}
> +
> +static struct drm_driver arcpgu_drm_driver = {
> +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> +			   DRIVER_ATOMIC,
> +	.preclose = arcpgu_preclose,
> +	.lastclose = arcpgu_lastclose,
> +	.name = "drm-arcpgu",
> +	.desc = "ARC PGU Controller",
> +	.date = "20160219",
> +	.major = 1,
> +	.minor = 0,
> +	.patchlevel = 0,
> +	.fops = &arcpgu_drm_ops,
> +	.load = arcpgu_load,
> +	.unload = arcpgu_unload,

Load and unload hooks are deprecated (it's a classic midlayer mistake).
Please use drm_dev_alloc/register pairs directly instead, and put your
device setup code in-between. Similar for unloading. There's a bunch of
example drivers converted already.

> +	.dumb_create = drm_gem_cma_dumb_create,
> +	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
> +	.dumb_destroy = drm_gem_dumb_destroy,
> +	.get_vblank_counter = drm_vblank_no_hw_counter,
> +	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> +	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> +	.gem_free_object = drm_gem_cma_free_object,
> +	.gem_vm_ops = &drm_gem_cma_vm_ops,
> +	.gem_prime_export = drm_gem_prime_export,
> +	.gem_prime_import = drm_gem_prime_import,
> +	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> +	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> +	.gem_prime_vmap = drm_gem_cma_prime_vmap,
> +	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> +	.gem_prime_mmap = drm_gem_cma_prime_mmap,
> +};
> +
> +static int arcpgu_probe(struct platform_device *pdev)
> +{
> +	return drm_platform_init(&arcpgu_drm_driver, pdev);

... or read the kerneldoc of this function, which also explains what you
should do ;-)

> +}
> +
> +static int arcpgu_remove(struct platform_device *pdev)
> +{
> +	struct drm_device *drm = dev_get_drvdata(&pdev->dev);
> +
> +	drm_put_dev(drm);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id arcpgu_of_table[] = {
> +	{.compatible = "snps,arcpgu"},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, arcpgu_of_table);
> +
> +static struct platform_driver arcpgu_platform_driver = {
> +	.probe = arcpgu_probe,
> +	.remove = arcpgu_remove,
> +	.driver = {
> +		   .name = "arcpgu",
> +		   .owner = THIS_MODULE,
> +		   .of_match_table = arcpgu_of_table,
> +		   },
> +};
> +
> +module_platform_driver(arcpgu_platform_driver);
> +
> +MODULE_AUTHOR("Carlos Palminha <[e-mail]");
> +MODULE_DESCRIPTION("ARC PGU DRM driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/gpu/drm/arc/arcpgu_fbdev.c b/drivers/gpu/drm/arc/arcpgu_fbdev.c
> new file mode 100644
> index 0000000..6f67706
> --- /dev/null
> +++ b/drivers/gpu/drm/arc/arcpgu_fbdev.c
> @@ -0,0 +1,245 @@
> +/*
> + * ARC PGU DRM driver.
> + *
> + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_fb_cma_helper.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +
> +struct drm_fb_cma {
> +	struct drm_framebuffer		fb;
> +	struct drm_gem_cma_object	*obj[4];
> +};
> +
> +struct drm_fbdev_cma {
> +	struct drm_fb_helper	fb_helper;
> +	struct drm_fb_cma	*fb;
> +};
> +
> +static inline struct drm_fbdev_cma *to_fbdev_cma(struct drm_fb_helper *helper)
> +{
> +	return container_of(helper, struct drm_fbdev_cma, fb_helper);
> +}
> +
> +static inline struct drm_fb_cma *to_fb_cma(struct drm_framebuffer *fb)
> +{
> +	return container_of(fb, struct drm_fb_cma, fb);
> +}
> +
> +static void drm_fb_cma_destroy(struct drm_framebuffer *fb)
> +{
> +	struct drm_fb_cma *fb_cma = to_fb_cma(fb);
> +	int i;
> +
> +	for (i = 0; i < 4; i++) {
> +		if (fb_cma->obj[i])
> +			drm_gem_object_unreference_unlocked(&fb_cma->obj[i]->base);
> +	}
> +
> +	drm_framebuffer_cleanup(fb);
> +	kfree(fb_cma);
> +}
> +
> +static int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
> +	struct drm_file *file_priv, unsigned int *handle)
> +{
> +	struct drm_fb_cma *fb_cma = to_fb_cma(fb);
> +
> +	return drm_gem_handle_create(file_priv,
> +			&fb_cma->obj[0]->base, handle);
> +}
> +
> +static struct drm_framebuffer_funcs drm_fb_cma_funcs = {
> +	.destroy	= drm_fb_cma_destroy,
> +	.create_handle	= drm_fb_cma_create_handle,
> +};
> +
> +static struct drm_fb_cma *drm_fb_cma_alloc(struct drm_device *dev,
> +	const struct drm_mode_fb_cmd2 *mode_cmd,
> +	struct drm_gem_cma_object **obj,
> +	unsigned int num_planes)
> +{
> +	struct drm_fb_cma *fb_cma;
> +	int ret;
> +	int i;
> +
> +	fb_cma = kzalloc(sizeof(*fb_cma), GFP_KERNEL);
> +	if (!fb_cma)
> +		return ERR_PTR(-ENOMEM);
> +
> +	drm_helper_mode_fill_fb_struct(&fb_cma->fb, mode_cmd);
> +
> +	for (i = 0; i < num_planes; i++)
> +		fb_cma->obj[i] = obj[i];
> +
> +	ret = drm_framebuffer_init(dev, &fb_cma->fb, &drm_fb_cma_funcs);
> +	if (ret) {
> +		dev_err(dev->dev, "Failed to initialize framebuffer: %d\n", ret);
> +		kfree(fb_cma);
> +		return ERR_PTR(ret);
> +	}
> +
> +	return fb_cma;
> +}
> +
> +/*
> + * This function is the only reason to have a copy of drm_fbdev_cma_init()
> + * here in this driver.
> + *
> + * In its turn this mmap() is required to mark user-space page as non-cached
> + * because it is just a mirror or real hardware frame-buffer.
> + */
> +static int arcpgu_mmap(struct fb_info *info, struct vm_area_struct *vma)
> +{
> +	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
> +	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
> +}

This looks very fishy, no other drm driver even bothers with providing an
fb_mmap hook. What exactly do you need this for? Assuming you've mmapped
your fbcon drm_framebuffer correctly for kernel access things should just
work ...

> +
> +static struct fb_ops drm_fbdev_cma_ops = {
> +	.owner		= THIS_MODULE,
> +	.fb_mmap	= arcpgu_mmap,
> +	.fb_fillrect	= drm_fb_helper_sys_fillrect,
> +	.fb_copyarea	= drm_fb_helper_sys_copyarea,
> +	.fb_imageblit	= drm_fb_helper_sys_imageblit,
> +	.fb_check_var	= drm_fb_helper_check_var,
> +	.fb_set_par	= drm_fb_helper_set_par,
> +	.fb_blank	= drm_fb_helper_blank,
> +	.fb_pan_display	= drm_fb_helper_pan_display,
> +	.fb_setcmap	= drm_fb_helper_setcmap,
> +};
> +
> +static int drm_fbdev_cma_create(struct drm_fb_helper *helper,
> +	struct drm_fb_helper_surface_size *sizes)
> +{
> +	struct drm_fbdev_cma *fbdev_cma = to_fbdev_cma(helper);
> +	struct drm_mode_fb_cmd2 mode_cmd = { 0 };
> +	struct drm_device *dev = helper->dev;
> +	struct drm_gem_cma_object *obj;
> +	struct drm_framebuffer *fb;
> +	unsigned int bytes_per_pixel;
> +	unsigned long offset;
> +	struct fb_info *fbi;
> +	size_t size;
> +	int ret;
> +
> +	DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d)\n",
> +			sizes->surface_width, sizes->surface_height,
> +			sizes->surface_bpp);
> +
> +	bytes_per_pixel = DIV_ROUND_UP(sizes->surface_bpp, 8);
> +
> +	mode_cmd.width = sizes->surface_width;
> +	mode_cmd.height = sizes->surface_height;
> +	mode_cmd.pitches[0] = sizes->surface_width * bytes_per_pixel;
> +	mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
> +		sizes->surface_depth);
> +
> +	size = mode_cmd.pitches[0] * mode_cmd.height;
> +	obj = drm_gem_cma_create(dev, size);
> +	if (IS_ERR(obj))
> +		return -ENOMEM;
> +
> +	fbi = drm_fb_helper_alloc_fbi(helper);
> +	if (IS_ERR(fbi)) {
> +		ret = PTR_ERR(fbi);
> +		goto err_gem_free_object;
> +	}
> +
> +	fbdev_cma->fb = drm_fb_cma_alloc(dev, &mode_cmd, &obj, 1);
> +	if (IS_ERR(fbdev_cma->fb)) {
> +		dev_err(dev->dev, "Failed to allocate DRM framebuffer.\n");
> +		ret = PTR_ERR(fbdev_cma->fb);
> +		goto err_fb_info_destroy;
> +	}
> +
> +	fb = &fbdev_cma->fb->fb;
> +	helper->fb = fb;
> +
> +	fbi->par = helper;
> +	fbi->flags = FBINFO_FLAG_DEFAULT;
> +	fbi->fbops = &drm_fbdev_cma_ops;
> +
> +	drm_fb_helper_fill_fix(fbi, fb->pitches[0], fb->depth);
> +	drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height);
> +
> +	offset = fbi->var.xoffset * bytes_per_pixel;
> +	offset += fbi->var.yoffset * fb->pitches[0];
> +
> +	dev->mode_config.fb_base = (resource_size_t)obj->paddr;
> +	fbi->screen_base = obj->vaddr + offset;
> +	fbi->fix.smem_start = (unsigned long)(obj->paddr + offset);
> +	fbi->screen_size = size;
> +	fbi->fix.smem_len = size;
> +
> +	return 0;
> +
> +err_fb_info_destroy:
> +	drm_fb_helper_release_fbi(helper);
> +err_gem_free_object:
> +	dev->driver->gem_free_object(&obj->base);
> +	return ret;
> +}
> +
> +static const struct drm_fb_helper_funcs drm_fb_cma_helper_funcs = {
> +	.fb_probe = drm_fbdev_cma_create,
> +};
> +
> +struct drm_fbdev_cma *arcpgu_fbdev_cma_init(struct drm_device *dev,
> +	unsigned int preferred_bpp, unsigned int num_crtc,
> +	unsigned int max_conn_count)
> +{
> +	struct drm_fbdev_cma *fbdev_cma;
> +	struct drm_fb_helper *helper;
> +	int ret;
> +
> +	fbdev_cma = kzalloc(sizeof(*fbdev_cma), GFP_KERNEL);
> +	if (!fbdev_cma) {
> +		dev_err(dev->dev, "Failed to allocate drm fbdev.\n");
> +		return ERR_PTR(-ENOMEM);
> +	}
> +
> +	helper = &fbdev_cma->fb_helper;
> +
> +	drm_fb_helper_prepare(dev, helper, &drm_fb_cma_helper_funcs);
> +
> +	ret = drm_fb_helper_init(dev, helper, num_crtc, max_conn_count);
> +	if (ret < 0) {
> +		dev_err(dev->dev, "Failed to initialize drm fb helper.\n");
> +		goto err_free;
> +	}
> +
> +	ret = drm_fb_helper_single_add_all_connectors(helper);
> +	if (ret < 0) {
> +		dev_err(dev->dev, "Failed to add connectors.\n");
> +		goto err_drm_fb_helper_fini;
> +
> +	}
> +
> +	ret = drm_fb_helper_initial_config(helper, preferred_bpp);
> +	if (ret < 0) {
> +		dev_err(dev->dev, "Failed to set initial hw configuration.\n");
> +		goto err_drm_fb_helper_fini;
> +	}
> +
> +	return fbdev_cma;
> +
> +err_drm_fb_helper_fini:
> +	drm_fb_helper_fini(helper);
> +err_free:
> +	kfree(fbdev_cma);
> +
> +	return ERR_PTR(ret);
> +}
> diff --git a/drivers/gpu/drm/arc/arcpgu_hdmi.c b/drivers/gpu/drm/arc/arcpgu_hdmi.c
> new file mode 100644
> index 0000000..7adafa3
> --- /dev/null
> +++ b/drivers/gpu/drm/arc/arcpgu_hdmi.c
> @@ -0,0 +1,207 @@
> +/*
> + * ARC PGU DRM driver.
> + *
> + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_encoder_slave.h>
> +#include <drm/drm_atomic_helper.h>
> +
> +#include "arcpgu.h"
> +
> +struct arcpgu_drm_connector {
> +	struct drm_connector connector;
> +	struct drm_encoder_slave *encoder_slave;
> +};
> +
> +static int arcpgu_drm_connector_get_modes(struct drm_connector *connector)
> +{
> +	const struct drm_encoder_slave_funcs *sfuncs;
> +	struct drm_encoder_slave *slave;
> +	struct arcpgu_drm_connector *con =
> +		container_of(connector, struct arcpgu_drm_connector, connector);
> +
> +	slave = con->encoder_slave;
> +	if (slave == NULL) {
> +		dev_err(connector->dev->dev,
> +			"connector_get_modes: cannot find slave encoder for connector\n");
> +		return 0;
> +	}
> +
> +	sfuncs = slave->slave_funcs;
> +	if (sfuncs->get_modes == NULL)
> +		return 0;
> +
> +	return sfuncs->get_modes(&slave->base, connector);
> +}
> +
> +struct drm_encoder *
> +arcpgu_drm_connector_best_encoder(struct drm_connector *connector)
> +{
> +	struct drm_encoder_slave *slave;
> +	struct arcpgu_drm_connector *con =
> +		container_of(connector, struct arcpgu_drm_connector, connector);
> +
> +	slave = con->encoder_slave;
> +	if (slave == NULL) {
> +		dev_err(connector->dev->dev,
> +			"connector_best_encoder: cannot find slave encoder for connector\n");
> +		return NULL;
> +	}
> +
> +	return &slave->base;
> +}
> +
> +static enum drm_connector_status
> +arcpgu_drm_connector_detect(struct drm_connector *connector, bool force)
> +{
> +	enum drm_connector_status status = connector_status_unknown;
> +	const struct drm_encoder_slave_funcs *sfuncs;
> +	struct drm_encoder_slave *slave;
> +
> +	struct arcpgu_drm_connector *con =
> +		container_of(connector, struct arcpgu_drm_connector, connector);
> +
> +	slave = con->encoder_slave;
> +	if (slave == NULL) {
> +		dev_err(connector->dev->dev,
> +			"connector_detect: cannot find slave encoder for connector\n");
> +		return status;
> +	}
> +
> +	sfuncs = slave->slave_funcs;
> +	if (sfuncs && sfuncs->detect)
> +		return sfuncs->detect(&slave->base, connector);
> +
> +	dev_err(connector->dev->dev, "connector_detect: could not detect slave funcs\n");
> +	return status;
> +}
> +
> +static void arcpgu_drm_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);
> +	drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_helper_funcs
> +arcpgu_drm_connector_helper_funcs = {
> +	.get_modes = arcpgu_drm_connector_get_modes,
> +	.best_encoder = arcpgu_drm_connector_best_encoder,
> +};
> +
> +static const struct drm_connector_funcs arcpgu_drm_connector_funcs = {
> +	.dpms = drm_helper_connector_dpms,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.detect = arcpgu_drm_connector_detect,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = arcpgu_drm_connector_destroy,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static struct drm_encoder_helper_funcs arcpgu_drm_encoder_helper_funcs = {
> +	.dpms = drm_i2c_encoder_dpms,
> +	.mode_fixup = drm_i2c_encoder_mode_fixup,
> +	.mode_set = drm_i2c_encoder_mode_set,
> +	.prepare = drm_i2c_encoder_prepare,
> +	.commit = drm_i2c_encoder_commit,
> +	.detect = drm_i2c_encoder_detect,
> +};
> +
> +static struct drm_encoder_funcs arcpgu_drm_encoder_funcs = {
> +	.destroy = drm_encoder_cleanup,
> +};
> +
> +int arcpgu_drm_hdmi_init(struct drm_device *drm, struct device_node *np)
> +{
> +	struct arcpgu_drm_connector *arcpgu_connector;
> +	struct drm_i2c_encoder_driver *driver;
> +	struct drm_encoder_slave *encoder;
> +	struct drm_connector *connector;
> +	struct i2c_client *i2c_slave;
> +	int ret;
> +
> +	encoder = devm_kzalloc(drm->dev, sizeof(*encoder), GFP_KERNEL);
> +	if (encoder == NULL)
> +		return -ENOMEM;
> +
> +	i2c_slave = of_find_i2c_device_by_node(np);
> +	if (!i2c_slave || !i2c_get_clientdata(i2c_slave)) {
> +		dev_err(drm->dev, "failed to find i2c slave encoder\n");
> +		return -EPROBE_DEFER;
> +	}
> +
> +	if (i2c_slave->dev.driver == NULL) {
> +		dev_err(drm->dev, "failed to find i2c slave driver\n");
> +		return -EPROBE_DEFER;
> +	}
> +
> +	driver =
> +	    to_drm_i2c_encoder_driver(to_i2c_driver(i2c_slave->dev.driver));
> +	ret = driver->encoder_init(i2c_slave, drm, encoder);
> +	if (ret) {
> +		dev_err(drm->dev, "failed to initialize i2c encoder slave\n");
> +		return ret;
> +	}
> +
> +	encoder->base.possible_crtcs = 1;
> +	encoder->base.possible_clones = 0;
> +	ret = drm_encoder_init(drm, &encoder->base, &arcpgu_drm_encoder_funcs,
> +			       DRM_MODE_ENCODER_TMDS, NULL);
> +	if (ret)
> +		return ret;
> +
> +	drm_encoder_helper_add(&encoder->base,
> +			       &arcpgu_drm_encoder_helper_funcs);
> +
> +	arcpgu_connector = devm_kzalloc(drm->dev, sizeof(*arcpgu_connector),
> +					GFP_KERNEL);
> +	if (!arcpgu_connector) {
> +		ret = -ENOMEM;
> +		goto error_encoder_cleanup;
> +	}
> +
> +	connector = &arcpgu_connector->connector;
> +	drm_connector_helper_add(connector, &arcpgu_drm_connector_helper_funcs);
> +	ret = drm_connector_init(drm, connector, &arcpgu_drm_connector_funcs,
> +			DRM_MODE_CONNECTOR_HDMIA);
> +	if (ret < 0) {
> +		dev_err(drm->dev, "failed to initialize drm connector\n");
> +		goto error_encoder_cleanup;
> +	}
> +
> +	ret = drm_connector_register(connector);
> +	if (ret < 0) {
> +		dev_err(drm->dev, "failed to regiter DRM connector and helper funcs\n");
> +		goto error_connector_cleanup;
> +	}
> +
> +	ret = drm_mode_connector_attach_encoder(connector, &encoder->base);
> +	if (ret < 0) {
> +		dev_err(drm->dev, "could not attach connector to encoder\n");
> +		drm_connector_unregister(connector);
> +		goto error_connector_cleanup;
> +	}
> +
> +	arcpgu_connector->encoder_slave = encoder;
> +
> +	return 0;
> +
> +error_connector_cleanup:
> +	drm_connector_cleanup(connector);
> +
> +error_encoder_cleanup:
> +	drm_encoder_cleanup(&encoder->base);
> +	return ret;
> +}
> diff --git a/drivers/gpu/drm/arc/arcpgu_regs.h b/drivers/gpu/drm/arc/arcpgu_regs.h
> new file mode 100644
> index 0000000..f04165f
> --- /dev/null
> +++ b/drivers/gpu/drm/arc/arcpgu_regs.h
> @@ -0,0 +1,36 @@
> +/*
> + * ARC PGU DRM driver.
> + *
> + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef _ARC_PGU_REGS_H_
> +#define _ARC_PGU_REGS_H_
> +
> +#define ARCPGU_REG_CTRL		0x00
> +#define ARCPGU_REG_STAT		0x04
> +#define ARCPGU_REG_FMT		0x10
> +#define ARCPGU_REG_HSYNC	0x14
> +#define ARCPGU_REG_VSYNC	0x18
> +#define ARCPGU_REG_ACTIVE	0x1c
> +#define ARCPGU_REG_BUF0_ADDR	0x40
> +#define ARCPGU_REG_STRIDE	0x50
> +#define ARCPGU_REG_START_SET	0x84
> +
> +#define ARCPGU_REG_ID		0x3FC
> +
> +#define ARCPGU_CTRL_ENABLE_MASK	0x02
> +#define ARCPGU_MODE_RGB888_MASK	0x04
> +#define ARCPGU_STAT_BUSY_MASK	0x02
> +
> +#endif
> -- 
> 2.5.0
> 
> _______________________________________________
> dri-devel mailing list
> [e-mail]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

Alexey Brodkin March 14, 2016, 11:15 a.m. UTC | #2

Hi Daniel,

On Mon, 2016-03-14 at 08:00 +0100, Daniel Vetter wrote:
> On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> > 
> > ARC PGU could be found on some development boards from Synopsys.
> > This is a simple byte streamer that reads data from a framebuffer
> > and sends data to the single encoder.
> > 
> > Signed-off-by: Alexey Brodkin <[e-mail]>
> > Cc: David Airlie <[e-mail]>
> > Cc: [e-mail]
> > Cc: [e-mail]
> > Cc: Jose Abreu <[e-mail]>
> > ---
> > 
> > Changes v2 -> v3:
> >  * Improved failure path if arcpgu_connector wasn't allocated (thanks Jose).
> >  * Fixed driver building as module (reported by 0-DAY kernel test infrastruct.)
> >  * Implemented uncached mapping of user-space FB pages.
> > 
> > No changes v1 -> v2.
> > 
> Bunch of comments below to update your driver to latest styles and best
> practices.
> 
> Cheers, Daniel

Thanks for doing that review!

> > +
> > +static void arc_pgu_crtc_atomic_flush(struct drm_crtc *crtc,
> > +				      struct drm_crtc_state *state)
> > +{
> > +}
> > +
> > +static bool arc_pgu_crtc_mode_fixup(struct drm_crtc *crtc,
> > +				    const struct drm_display_mode *mode,
> > +				    struct drm_display_mode *adjusted_mode)
> > +{
> > +	return true;
> > +}
> You can drop the above 2 dummy functions.

Ok will do.

> > 
> > +
> > +static const struct drm_crtc_helper_funcs arc_pgu_crtc_helper_funcs = {
> > +	.mode_fixup	= arc_pgu_crtc_mode_fixup,
> > +	.mode_set	= drm_helper_crtc_mode_set,
> > +	.mode_set_base	= drm_helper_crtc_mode_set_base,
> > +	.mode_set_nofb	= arc_pgu_crtc_mode_set_nofb,
> > +	.enable		= arc_pgu_crtc_enable,
> > +	.disable	= arc_pgu_crtc_disable,
> > +	.prepare	= arc_pgu_crtc_disable,
> > +	.commit		= arc_pgu_crtc_enable,
> > +	.atomic_check	= arc_pgu_crtc_atomic_check,
> > +	.atomic_begin	= arc_pgu_crtc_atomic_begin,
> > +	.atomic_flush	= arc_pgu_crtc_atomic_flush,
> > +};
> > +
> > +static int arc_pgu_plane_atomic_check(struct drm_plane *plane,
> > +				      struct drm_plane_state *state)
> > +{
> > +	return 0;
> > +}
> You don't need dummy functions for this.

Ditto.

> > +
> > +void arc_pgu_crtc_suspend(struct drm_crtc *crtc)
> > +{
> > +	arc_pgu_crtc_disable(crtc);
> > +}
> > +
> > +void arc_pgu_crtc_resume(struct drm_crtc *crtc)
> > +{
> > +	arc_pgu_crtc_enable(crtc);
> > +}
> Please use the atomic suspend/resume helper that Thierry recently merged.
> See the kerneldoc of drm_atomic_helper_suspend as a starting point for how
> it works and how it's supposed to be used.

Well looks like this is a reminder if dummy copy-paste.
We don't support PM in that driver yet, so I'll remove both functions
for now.

> > +static int arcpgu_atomic_commit(struct drm_device *dev,
> > +				    struct drm_atomic_state *state, bool async)
> > +{
> > +	return drm_atomic_helper_commit(dev, state, false);
> Note that this isn't really async if you ever get around to implement
> fence support or vblank support. Just fyi.

Ok but for now should I leave it as it is?

> > +static struct drm_driver arcpgu_drm_driver = {
> > +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> > +			   DRIVER_ATOMIC,
> > +	.preclose = arcpgu_preclose,
> > +	.lastclose = arcpgu_lastclose,
> > +	.name = "drm-arcpgu",
> > +	.desc = "ARC PGU Controller",
> > +	.date = "20160219",
> > +	.major = 1,
> > +	.minor = 0,
> > +	.patchlevel = 0,
> > +	.fops = &arcpgu_drm_ops,
> > +	.load = arcpgu_load,
> > +	.unload = arcpgu_unload,
> Load and unload hooks are deprecated (it's a classic midlayer mistake).
> Please use drm_dev_alloc/register pairs directly instead, and put your
> device setup code in-between. Similar for unloading. There's a bunch of
> example drivers converted already.

Ok I took "atmel-hlcdc" as example.
And that's interesting.

If I put my arcpgu_load() in between drm_dev_alloc() and
drm_dev_register() then I'm getting this on the driver probe:
---------------------------------->8-------------------------------
[drm] Initialized drm 1.1.0 20060810
arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at lib/kobject.c:244 kobject_add_internal+0x17c/0x498()
kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.5.0-rc3-01062-ga447822-dirty #17

Stack Trace:
  arc_unwind_core.constprop.1+0xa4/0x110
  warn_slowpath_fmt+0x6e/0xfc
  kobject_add_internal+0x17c/0x498
  kobject_add+0x98/0xe4
  device_add+0xc6/0x734
  device_create_with_groups+0x12a/0x144
  drm_sysfs_connector_add+0x54/0xe8
  arcpgu_drm_hdmi_init+0xd4/0x17c
  arcpgu_probe+0x138/0x24c
  platform_drv_probe+0x2e/0x6c
  really_probe+0x212/0x35c
  __driver_attach+0x90/0x94
  bus_for_each_dev+0x46/0x80
  bus_add_driver+0x14e/0x1b4
  driver_register+0x64/0x108
  do_one_initcall+0x86/0x194
  kernel_init_freeable+0xf0/0x188
---[ end trace c67166ad43ddcce2 ]---
[drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
[drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
arcpgu e0017000.pgu: failed to regiter DRM connector and helper funcs
arcpgu: probe of e0017000.pgu failed with error -2
---------------------------------->8-------------------------------

But if I move arcpgu_load() after drm_dev_register() then everything
starts properly and I may see HDMI screen works perfectly fine.

Any thoughts?


> > 
> > +	.dumb_create = drm_gem_cma_dumb_create,
> > +	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
> > +	.dumb_destroy = drm_gem_dumb_destroy,
> > +	.get_vblank_counter = drm_vblank_no_hw_counter,
> > +	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> > +	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> > +	.gem_free_object = drm_gem_cma_free_object,
> > +	.gem_vm_ops = &drm_gem_cma_vm_ops,
> > +	.gem_prime_export = drm_gem_prime_export,
> > +	.gem_prime_import = drm_gem_prime_import,
> > +	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> > +	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> > +	.gem_prime_vmap = drm_gem_cma_prime_vmap,
> > +	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> > +	.gem_prime_mmap = drm_gem_cma_prime_mmap,
> > +};
> > +
> > +static int arcpgu_probe(struct platform_device *pdev)
> > +{
> > +	return drm_platform_init(&arcpgu_drm_driver, pdev);
> ... or read the kerneldoc of this function, which also explains what you
> should do ;-)

Could you please point me to the relevant document?
I wasn't able to find anything related from the first glance :(

> > +
> > +/*
> > + * This function is the only reason to have a copy of drm_fbdev_cma_init()
> > + * here in this driver.
> > + *
> > + * In its turn this mmap() is required to mark user-space page as non-cached
> > + * because it is just a mirror or real hardware frame-buffer.
> > + */
> > +static int arcpgu_mmap(struct fb_info *info, struct vm_area_struct *vma)
> > +{
> > +	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
> > +	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
> > +}
> This looks very fishy, no other drm driver even bothers with providing an
> fb_mmap hook. What exactly do you need this for? Assuming you've mmapped
> your fbcon drm_framebuffer correctly for kernel access things should just
> work ...

Indeed for kernel there's non need to that hack. Kernel deals directly with HW
frame-buffer area (that address we get from gem->paddr). And so every byte written gets
picked up by PGU and is then rendered on the display.

But when user-space opens /dev/fb0 and mmaps() it deals with memory pages which
are by default (at least on ARC) marked as "cached". I.e. user-space application
(I use that nice demo app https://github.com/qtproject/qt/blob/4.8/examples/qws/framebuffer/main.c)
deals with frame-buffer via data cache. And that has 2 problems:
 [1] Since no explicit cache flush gets executed some data is left in data cache,
     i.e. some parts of the picture never reaches real PGU.
     See what happens on display - http://imgur.com/iAbnnx3
     Those missing lines are exactly those 32-byte missing cache lines.
 [2] Even if we manage to flush data somehow massive amount of data that goes
     through data cache (let's sat 1080p@30Hz) will thrash it and as a result
     there will be no benefit for other cache users to use cache.

So we fix it simply marking pages mapped to user-space apps as uncached
that effectively routes all FB data directly to memry instead of polluting cache.

Hopefully that explanation makes sense.

-Alexey

Daniel Vetter March 15, 2016, 8:10 a.m. UTC | #3

On Mon, Mar 14, 2016 at 11:15:59AM +0000, Alexey Brodkin wrote:
> On Mon, 2016-03-14 at 08:00 +0100, Daniel Vetter wrote:
> > On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> > > +static int arcpgu_atomic_commit(struct drm_device *dev,
> > > +				    struct drm_atomic_state *state, bool async)
> > > +{
> > > +	return drm_atomic_helper_commit(dev, state, false);
> > Note that this isn't really async if you ever get around to implement
> > fence support or vblank support. Just fyi.
> 
> Ok but for now should I leave it as it is?

Yeah ok as-is, hence just fyi.

> > > +static struct drm_driver arcpgu_drm_driver = {
> > > +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> > > +			   DRIVER_ATOMIC,
> > > +	.preclose = arcpgu_preclose,
> > > +	.lastclose = arcpgu_lastclose,
> > > +	.name = "drm-arcpgu",
> > > +	.desc = "ARC PGU Controller",
> > > +	.date = "20160219",
> > > +	.major = 1,
> > > +	.minor = 0,
> > > +	.patchlevel = 0,
> > > +	.fops = &arcpgu_drm_ops,
> > > +	.load = arcpgu_load,
> > > +	.unload = arcpgu_unload,
> > Load and unload hooks are deprecated (it's a classic midlayer mistake).
> > Please use drm_dev_alloc/register pairs directly instead, and put your
> > device setup code in-between. Similar for unloading. There's a bunch of
> > example drivers converted already.
> 
> Ok I took "atmel-hlcdc" as example.
> And that's interesting.
> 
> If I put my arcpgu_load() in between drm_dev_alloc() and
> drm_dev_register() then I'm getting this on the driver probe:
> ---------------------------------->8-------------------------------
> [drm] Initialized drm 1.1.0 20060810
> arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at lib/kobject.c:244 kobject_add_internal+0x17c/0x498()
> kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper Not tainted 4.5.0-rc3-01062-ga447822-dirty #17
> 
> Stack Trace:
>   arc_unwind_core.constprop.1+0xa4/0x110
>   warn_slowpath_fmt+0x6e/0xfc
>   kobject_add_internal+0x17c/0x498
>   kobject_add+0x98/0xe4
>   device_add+0xc6/0x734
>   device_create_with_groups+0x12a/0x144
>   drm_sysfs_connector_add+0x54/0xe8
>   arcpgu_drm_hdmi_init+0xd4/0x17c
>   arcpgu_probe+0x138/0x24c
>   platform_drv_probe+0x2e/0x6c
>   really_probe+0x212/0x35c
>   __driver_attach+0x90/0x94
>   bus_for_each_dev+0x46/0x80
>   bus_add_driver+0x14e/0x1b4
>   driver_register+0x64/0x108
>   do_one_initcall+0x86/0x194
>   kernel_init_freeable+0xf0/0x188
> ---[ end trace c67166ad43ddcce2 ]---
> [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
> [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
> arcpgu e0017000.pgu: failed to regiter DRM connector and helper funcs
> arcpgu: probe of e0017000.pgu failed with error -2
> ---------------------------------->8-------------------------------
> 
> But if I move arcpgu_load() after drm_dev_register() then everything
> starts properly and I may see HDMI screen works perfectly fine.
> 
> Any thoughts?

Oops, yeah missed that detail. If you look at atmel it has a loop to
register all the drm connectors _after_ calling drm_dev_register().
Totally forgot about that. Can you pls
- Extract a new drm_connector_register_all() function
  (atmel_hlcdc_dc_connector_plug_all seems to be the best template),
  including kerneldoc.
- Adjust kerneldoc of drm_dev_register() to mention
  drm_connector_register_all() and that ordering constraint.
- Roll that helper out to all the drivers that currently hand-roll it (one
  patch per driver).

I know a bit of work but imo not too much, and by doing some small
refactoring every time someone stumbles over a drm pitfall we keep the
subsystem clean&easy to understand. You're up for this? Would be a prep
series, I'll happily review it to get it merged fast. Just a few weeks ago
I merged 20+ patches to make ->mode_fixup hooks optional and remove dummy
ones all over the subsystem, in other words: You'll have my full attention
;-)

> > > +	.dumb_create = drm_gem_cma_dumb_create,
> > > +	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
> > > +	.dumb_destroy = drm_gem_dumb_destroy,
> > > +	.get_vblank_counter = drm_vblank_no_hw_counter,
> > > +	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> > > +	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> > > +	.gem_free_object = drm_gem_cma_free_object,
> > > +	.gem_vm_ops = &drm_gem_cma_vm_ops,
> > > +	.gem_prime_export = drm_gem_prime_export,
> > > +	.gem_prime_import = drm_gem_prime_import,
> > > +	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> > > +	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> > > +	.gem_prime_vmap = drm_gem_cma_prime_vmap,
> > > +	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> > > +	.gem_prime_mmap = drm_gem_cma_prime_mmap,
> > > +};
> > > +
> > > +static int arcpgu_probe(struct platform_device *pdev)
> > > +{
> > > +	return drm_platform_init(&arcpgu_drm_driver, pdev);
> > ... or read the kerneldoc of this function, which also explains what you
> > should do ;-)
> 
> Could you please point me to the relevant document?
> I wasn't able to find anything related from the first glance :(

The kerneldoc comment for drm_platform_init says it's deprecated, please
use drm_dev_alloc/register instead.
> 
> > > +
> > > +/*
> > > + * This function is the only reason to have a copy of drm_fbdev_cma_init()
> > > + * here in this driver.
> > > + *
> > > + * In its turn this mmap() is required to mark user-space page as non-cached
> > > + * because it is just a mirror or real hardware frame-buffer.
> > > + */
> > > +static int arcpgu_mmap(struct fb_info *info, struct vm_area_struct *vma)
> > > +{
> > > +	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
> > > +	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
> > > +}
> > This looks very fishy, no other drm driver even bothers with providing an
> > fb_mmap hook. What exactly do you need this for? Assuming you've mmapped
> > your fbcon drm_framebuffer correctly for kernel access things should just
> > work ...
> 
> Indeed for kernel there's non need to that hack. Kernel deals directly with HW
> frame-buffer area (that address we get from gem->paddr). And so every byte written gets
> picked up by PGU and is then rendered on the display.
> 
> But when user-space opens /dev/fb0 and mmaps() it deals with memory pages which
> are by default (at least on ARC) marked as "cached". I.e. user-space application
> (I use that nice demo app https://github.com/qtproject/qt/blob/4.8/examples/qws/framebuffer/main.c)
> deals with frame-buffer via data cache. And that has 2 problems:
>  [1] Since no explicit cache flush gets executed some data is left in data cache,
>      i.e. some parts of the picture never reaches real PGU.
>      See what happens on display - http://imgur.com/iAbnnx3
>      Those missing lines are exactly those 32-byte missing cache lines.
>  [2] Even if we manage to flush data somehow massive amount of data that goes
>      through data cache (let's sat 1080p@30Hz) will thrash it and as a result
>      there will be no benefit for other cache users to use cache.
> 
> So we fix it simply marking pages mapped to user-space apps as uncached
> that effectively routes all FB data directly to memry instead of polluting cache.
> 
> Hopefully that explanation makes sense.

Still strange that you're the only one who needs this. I think best case
would be to provide some mmap helpers for fbdev which remap to dumb buffer
helpers or something similar. That way other drivers don't need to

Another piece is that right now fbdev emulation hasn't wired up the manual
update mode to the drm ->dirtyfb call. Drivers that need to manual flush
stuff to the screen currently all have to hand-roll those calls one way or
the other (udl, qxl, i915).

But just an observation really, nothing to fix up for this driver imo.
-Daniel

Alexey Brodkin March 15, 2016, 3:24 p.m. UTC | #4

Hi Daniel,

On Tue, 2016-03-15 at 09:10 +0100, Daniel Vetter wrote:
> On Mon, Mar 14, 2016 at 11:15:59AM +0000, Alexey Brodkin wrote:
> > 
> > On Mon, 2016-03-14 at 08:00 +0100, Daniel Vetter wrote:
> > > 
> > > On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> > > > 
> > > > +static int arcpgu_atomic_commit(struct drm_device *dev,
> > > > +				    struct drm_atomic_state *state, bool async)
> > > > +{
> > > > +	return drm_atomic_helper_commit(dev, state, false);
> > > Note that this isn't really async if you ever get around to implement
> > > fence support or vblank support. Just fyi.
> > Ok but for now should I leave it as it is?
> Yeah ok as-is, hence just fyi.

Thanks. Just wanted to make sure we're on the same page :)

> > 
> > > 
> > > > 
> > > > +static struct drm_driver arcpgu_drm_driver = {
> > > > +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> > > > +			   DRIVER_ATOMIC,
> > > > +	.preclose = arcpgu_preclose,
> > > > +	.lastclose = arcpgu_lastclose,
> > > > +	.name = "drm-arcpgu",
> > > > +	.desc = "ARC PGU Controller",
> > > > +	.date = "20160219",
> > > > +	.major = 1,
> > > > +	.minor = 0,
> > > > +	.patchlevel = 0,
> > > > +	.fops = &arcpgu_drm_ops,
> > > > +	.load = arcpgu_load,
> > > > +	.unload = arcpgu_unload,
> > > Load and unload hooks are deprecated (it's a classic midlayer mistake).
> > > Please use drm_dev_alloc/register pairs directly instead, and put your
> > > device setup code in-between. Similar for unloading. There's a bunch of
> > > example drivers converted already.
> > Ok I took "atmel-hlcdc" as example.
> > And that's interesting.
> > 
> > If I put my arcpgu_load() in between drm_dev_alloc() and
> > drm_dev_register() then I'm getting this on the driver probe:
> > ---------------------------------->8-------------------------------
> > [drm] Initialized drm 1.1.0 20060810
> > arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
> > ------------[ cut here ]------------
> > WARNING: CPU: 0 PID: 1 at lib/kobject.c:244 kobject_add_internal+0x17c/0x498()
> > kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
> > Modules linked in:
> > CPU: 0 PID: 1 Comm: swapper Not tainted 4.5.0-rc3-01062-ga447822-dirty #17
> > 
> > Stack Trace:
> >   arc_unwind_core.constprop.1+0xa4/0x110
> >   warn_slowpath_fmt+0x6e/0xfc
> >   kobject_add_internal+0x17c/0x498
> >   kobject_add+0x98/0xe4
> >   device_add+0xc6/0x734
> >   device_create_with_groups+0x12a/0x144
> >   drm_sysfs_connector_add+0x54/0xe8
> >   arcpgu_drm_hdmi_init+0xd4/0x17c
> >   arcpgu_probe+0x138/0x24c
> >   platform_drv_probe+0x2e/0x6c
> >   really_probe+0x212/0x35c
> >   __driver_attach+0x90/0x94
> >   bus_for_each_dev+0x46/0x80
> >   bus_add_driver+0x14e/0x1b4
> >   driver_register+0x64/0x108
> >   do_one_initcall+0x86/0x194
> >   kernel_init_freeable+0xf0/0x188
> > ---[ end trace c67166ad43ddcce2 ]---
> > [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
> > [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
> > arcpgu e0017000.pgu: failed to regiter DRM connector and helper funcs
> > arcpgu: probe of e0017000.pgu failed with error -2
> > ---------------------------------->8-------------------------------
> > 
> > But if I move arcpgu_load() after drm_dev_register() then everything
> > starts properly and I may see HDMI screen works perfectly fine.
> > 
> > Any thoughts?
> Oops, yeah missed that detail. If you look at atmel it has a loop to
> register all the drm connectors _after_ calling drm_dev_register().
> Totally forgot about that. Can you pls
> - Extract a new drm_connector_register_all() function
>   (atmel_hlcdc_dc_connector_plug_all seems to be the best template),
>   including kerneldoc.
> - Adjust kerneldoc of drm_dev_register() to mention
>   drm_connector_register_all() and that ordering constraint.
> - Roll that helper out to all the drivers that currently hand-roll it (one
>   patch per driver).
> 
> I know a bit of work but imo not too much, and by doing some small
> refactoring every time someone stumbles over a drm pitfall we keep the
> subsystem clean&easy to understand. You're up for this? Would be a prep
> series, I'll happily review it to get it merged fast. Just a few weeks ago
> I merged 20+ patches to make ->mode_fixup hooks optional and remove dummy
> ones all over the subsystem, in other words: You'll have my full attention
> ;-)

Sure, I'm ready to pay that price :)
Stay tuned and patches will follow.

> > 
> > > 
> > > > 
> > > > +	.dumb_create = drm_gem_cma_dumb_create,
> > > > +	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
> > > > +	.dumb_destroy = drm_gem_dumb_destroy,
> > > > +	.get_vblank_counter = drm_vblank_no_hw_counter,
> > > > +	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> > > > +	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> > > > +	.gem_free_object = drm_gem_cma_free_object,
> > > > +	.gem_vm_ops = &drm_gem_cma_vm_ops,
> > > > +	.gem_prime_export = drm_gem_prime_export,
> > > > +	.gem_prime_import = drm_gem_prime_import,
> > > > +	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> > > > +	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> > > > +	.gem_prime_vmap = drm_gem_cma_prime_vmap,
> > > > +	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> > > > +	.gem_prime_mmap = drm_gem_cma_prime_mmap,
> > > > +};
> > > > +
> > > > +static int arcpgu_probe(struct platform_device *pdev)
> > > > +{
> > > > +	return drm_platform_init(&arcpgu_drm_driver, pdev);
> > > ... or read the kerneldoc of this function, which also explains what you
> > > should do ;-)
> > Could you please point me to the relevant document?
> > I wasn't able to find anything related from the first glance :(
> The kerneldoc comment for drm_platform_init says it's deprecated, please
> use drm_dev_alloc/register instead.

Yeah I saw this. I was a bit confused with word "kerneldoc" thinking about
.txt files in Documentation folder.

> > 
> > > 
> > > > 
> > > > +
> > > > +/*
> > > > + * This function is the only reason to have a copy of drm_fbdev_cma_init()
> > > > + * here in this driver.
> > > > + *
> > > > + * In its turn this mmap() is required to mark user-space page as non-cached
> > > > + * because it is just a mirror or real hardware frame-buffer.
> > > > + */
> > > > +static int arcpgu_mmap(struct fb_info *info, struct vm_area_struct *vma)
> > > > +{
> > > > +	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
> > > > +	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
> > > > +}
> > > This looks very fishy, no other drm driver even bothers with providing an
> > > fb_mmap hook. What exactly do you need this for? Assuming you've mmapped
> > > your fbcon drm_framebuffer correctly for kernel access things should just
> > > work ...
> > Indeed for kernel there's non need to that hack. Kernel deals directly with HW
> > frame-buffer area (that address we get from gem->paddr). And so every byte written gets
> > picked up by PGU and is then rendered on the display.
> > 
> > But when user-space opens /dev/fb0 and mmaps() it deals with memory pages which
> > are by default (at least on ARC) marked as "cached". I.e. user-space application
> > (I use that nice demo app https://github.com/qtproject/qt/blob/4.8/examples/qws/framebuffer/main.c)
> > deals with frame-buffer via data cache. And that has 2 problems:
> >  [1] Since no explicit cache flush gets executed some data is left in data cache,
> >      i.e. some parts of the picture never reaches real PGU.
> >      See what happens on display - http://imgur.com/iAbnnx3
> >      Those missing lines are exactly those 32-byte missing cache lines.
> >  [2] Even if we manage to flush data somehow massive amount of data that goes
> >      through data cache (let's sat 1080p@30Hz) will thrash it and as a result
> >      there will be no benefit for other cache users to use cache.
> > 
> > So we fix it simply marking pages mapped to user-space apps as uncached
> > that effectively routes all FB data directly to memry instead of polluting cache.
> > 
> > Hopefully that explanation makes sense.
> Still strange that you're the only one who needs this. I think best case
> would be to provide some mmap helpers for fbdev which remap to dumb buffer
> helpers or something similar. That way other drivers don't need to.

Ok I took another look and now see what's missing.
All other arches implement their own fb_pgprotect() in arch/X/include/asm/fb.h
which does exactly what I need. So entire arcpgu_fbdev.c will be dumped in v4 :)

-Alexey

Daniel Vetter March 15, 2016, 3:59 p.m. UTC | #5

On Tue, Mar 15, 2016 at 03:24:46PM +0000, Alexey Brodkin wrote:
> Hi Daniel,
> 
> On Tue, 2016-03-15 at 09:10 +0100, Daniel Vetter wrote:
> > On Mon, Mar 14, 2016 at 11:15:59AM +0000, Alexey Brodkin wrote:
> > > 
> > > On Mon, 2016-03-14 at 08:00 +0100, Daniel Vetter wrote:
> > > > 
> > > > On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> > > > > 
> > > > > +static int arcpgu_atomic_commit(struct drm_device *dev,
> > > > > +				    struct drm_atomic_state *state, bool async)
> > > > > +{
> > > > > +	return drm_atomic_helper_commit(dev, state, false);
> > > > Note that this isn't really async if you ever get around to implement
> > > > fence support or vblank support. Just fyi.
> > > Ok but for now should I leave it as it is?
> > Yeah ok as-is, hence just fyi.
> 
> Thanks. Just wanted to make sure we're on the same page :)
> 
> > > 
> > > > 
> > > > > 
> > > > > +static struct drm_driver arcpgu_drm_driver = {
> > > > > +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> > > > > +			   DRIVER_ATOMIC,
> > > > > +	.preclose = arcpgu_preclose,
> > > > > +	.lastclose = arcpgu_lastclose,
> > > > > +	.name = "drm-arcpgu",
> > > > > +	.desc = "ARC PGU Controller",
> > > > > +	.date = "20160219",
> > > > > +	.major = 1,
> > > > > +	.minor = 0,
> > > > > +	.patchlevel = 0,
> > > > > +	.fops = &arcpgu_drm_ops,
> > > > > +	.load = arcpgu_load,
> > > > > +	.unload = arcpgu_unload,
> > > > Load and unload hooks are deprecated (it's a classic midlayer mistake).
> > > > Please use drm_dev_alloc/register pairs directly instead, and put your
> > > > device setup code in-between. Similar for unloading. There's a bunch of
> > > > example drivers converted already.
> > > Ok I took "atmel-hlcdc" as example.
> > > And that's interesting.
> > > 
> > > If I put my arcpgu_load() in between drm_dev_alloc() and
> > > drm_dev_register() then I'm getting this on the driver probe:
> > > ---------------------------------->8-------------------------------
> > > [drm] Initialized drm 1.1.0 20060810
> > > arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
> > > ------------[ cut here ]------------
> > > WARNING: CPU: 0 PID: 1 at lib/kobject.c:244 kobject_add_internal+0x17c/0x498()
> > > kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
> > > Modules linked in:
> > > CPU: 0 PID: 1 Comm: swapper Not tainted 4.5.0-rc3-01062-ga447822-dirty #17
> > > 
> > > Stack Trace:
> > >   arc_unwind_core.constprop.1+0xa4/0x110
> > >   warn_slowpath_fmt+0x6e/0xfc
> > >   kobject_add_internal+0x17c/0x498
> > >   kobject_add+0x98/0xe4
> > >   device_add+0xc6/0x734
> > >   device_create_with_groups+0x12a/0x144
> > >   drm_sysfs_connector_add+0x54/0xe8
> > >   arcpgu_drm_hdmi_init+0xd4/0x17c
> > >   arcpgu_probe+0x138/0x24c
> > >   platform_drv_probe+0x2e/0x6c
> > >   really_probe+0x212/0x35c
> > >   __driver_attach+0x90/0x94
> > >   bus_for_each_dev+0x46/0x80
> > >   bus_add_driver+0x14e/0x1b4
> > >   driver_register+0x64/0x108
> > >   do_one_initcall+0x86/0x194
> > >   kernel_init_freeable+0xf0/0x188
> > > ---[ end trace c67166ad43ddcce2 ]---
> > > [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
> > > [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
> > > arcpgu e0017000.pgu: failed to regiter DRM connector and helper funcs
> > > arcpgu: probe of e0017000.pgu failed with error -2
> > > ---------------------------------->8-------------------------------
> > > 
> > > But if I move arcpgu_load() after drm_dev_register() then everything
> > > starts properly and I may see HDMI screen works perfectly fine.
> > > 
> > > Any thoughts?
> > Oops, yeah missed that detail. If you look at atmel it has a loop to
> > register all the drm connectors _after_ calling drm_dev_register().
> > Totally forgot about that. Can you pls
> > - Extract a new drm_connector_register_all() function
> >   (atmel_hlcdc_dc_connector_plug_all seems to be the best template),
> >   including kerneldoc.
> > - Adjust kerneldoc of drm_dev_register() to mention
> >   drm_connector_register_all() and that ordering constraint.
> > - Roll that helper out to all the drivers that currently hand-roll it (one
> >   patch per driver).
> > 
> > I know a bit of work but imo not too much, and by doing some small
> > refactoring every time someone stumbles over a drm pitfall we keep the
> > subsystem clean&easy to understand. You're up for this? Would be a prep
> > series, I'll happily review it to get it merged fast. Just a few weeks ago
> > I merged 20+ patches to make ->mode_fixup hooks optional and remove dummy
> > ones all over the subsystem, in other words: You'll have my full attention
> > ;-)
> 
> Sure, I'm ready to pay that price :)
> Stay tuned and patches will follow.

Awesome, looking forward to your patches.

> > > 
> > > > 
> > > > > 
> > > > > +	.dumb_create = drm_gem_cma_dumb_create,
> > > > > +	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
> > > > > +	.dumb_destroy = drm_gem_dumb_destroy,
> > > > > +	.get_vblank_counter = drm_vblank_no_hw_counter,
> > > > > +	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> > > > > +	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> > > > > +	.gem_free_object = drm_gem_cma_free_object,
> > > > > +	.gem_vm_ops = &drm_gem_cma_vm_ops,
> > > > > +	.gem_prime_export = drm_gem_prime_export,
> > > > > +	.gem_prime_import = drm_gem_prime_import,
> > > > > +	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> > > > > +	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> > > > > +	.gem_prime_vmap = drm_gem_cma_prime_vmap,
> > > > > +	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> > > > > +	.gem_prime_mmap = drm_gem_cma_prime_mmap,
> > > > > +};
> > > > > +
> > > > > +static int arcpgu_probe(struct platform_device *pdev)
> > > > > +{
> > > > > +	return drm_platform_init(&arcpgu_drm_driver, pdev);
> > > > ... or read the kerneldoc of this function, which also explains what you
> > > > should do ;-)
> > > Could you please point me to the relevant document?
> > > I wasn't able to find anything related from the first glance :(
> > The kerneldoc comment for drm_platform_init says it's deprecated, please
> > use drm_dev_alloc/register instead.
> 
> Yeah I saw this. I was a bit confused with word "kerneldoc" thinking about
> .txt files in Documentation folder.

kerneldoc is the kernel-specific tool to parse the specially formatted
in-source comments starting with /**. Run

$ make htmldocs

and you should have the generated gpu docs in Documentation/DocBook/gpu/
which pulls all those together into something somewhat coherent.

> 
> > > 
> > > > 
> > > > > 
> > > > > +
> > > > > +/*
> > > > > + * This function is the only reason to have a copy of drm_fbdev_cma_init()
> > > > > + * here in this driver.
> > > > > + *
> > > > > + * In its turn this mmap() is required to mark user-space page as non-cached
> > > > > + * because it is just a mirror or real hardware frame-buffer.
> > > > > + */
> > > > > +static int arcpgu_mmap(struct fb_info *info, struct vm_area_struct *vma)
> > > > > +{
> > > > > +	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
> > > > > +	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
> > > > > +}
> > > > This looks very fishy, no other drm driver even bothers with providing an
> > > > fb_mmap hook. What exactly do you need this for? Assuming you've mmapped
> > > > your fbcon drm_framebuffer correctly for kernel access things should just
> > > > work ...
> > > Indeed for kernel there's non need to that hack. Kernel deals directly with HW
> > > frame-buffer area (that address we get from gem->paddr). And so every byte written gets
> > > picked up by PGU and is then rendered on the display.
> > > 
> > > But when user-space opens /dev/fb0 and mmaps() it deals with memory pages which
> > > are by default (at least on ARC) marked as "cached". I.e. user-space application
> > > (I use that nice demo app https://github.com/qtproject/qt/blob/4.8/examples/qws/framebuffer/main.c)
> > > deals with frame-buffer via data cache. And that has 2 problems:
> > >  [1] Since no explicit cache flush gets executed some data is left in data cache,
> > >      i.e. some parts of the picture never reaches real PGU.
> > >      See what happens on display - http://imgur.com/iAbnnx3
> > >      Those missing lines are exactly those 32-byte missing cache lines.
> > >  [2] Even if we manage to flush data somehow massive amount of data that goes
> > >      through data cache (let's sat 1080p@30Hz) will thrash it and as a result
> > >      there will be no benefit for other cache users to use cache.
> > > 
> > > So we fix it simply marking pages mapped to user-space apps as uncached
> > > that effectively routes all FB data directly to memry instead of polluting cache.
> > > 
> > > Hopefully that explanation makes sense.
> > Still strange that you're the only one who needs this. I think best case
> > would be to provide some mmap helpers for fbdev which remap to dumb buffer
> > helpers or something similar. That way other drivers don't need to.
> 
> Ok I took another look and now see what's missing.
> All other arches implement their own fb_pgprotect() in arch/X/include/asm/fb.h
> which does exactly what I need. So entire arcpgu_fbdev.c will be dumped in v4 :)

Ah, excellent.
-Daniel

Alexey Brodkin March 17, 2016, 8:27 p.m. UTC | #6

Hi Daniel,

On Tue, 2016-03-15 at 16:59 +0100, Daniel Vetter wrote:
> On Tue, Mar 15, 2016 at 03:24:46PM +0000, Alexey Brodkin wrote:
> > On Tue, 2016-03-15 at 09:10 +0100, Daniel Vetter wrote:
> > > On Mon, Mar 14, 2016 at 11:15:59AM +0000, Alexey Brodkin wrote:
> > > > On Mon, 2016-03-14 at 08:00 +0100, Daniel Vetter wrote:
> > > > > On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> > > > > > 
> > > > > > +static struct drm_driver arcpgu_drm_driver = {
> > > > > > +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> > > > > > +			   DRIVER_ATOMIC,
> > > > > > +	.preclose = arcpgu_preclose,
> > > > > > +	.lastclose = arcpgu_lastclose,
> > > > > > +	.name = "drm-arcpgu",
> > > > > > +	.desc = "ARC PGU Controller",
> > > > > > +	.date = "20160219",
> > > > > > +	.major = 1,
> > > > > > +	.minor = 0,
> > > > > > +	.patchlevel = 0,
> > > > > > +	.fops = &arcpgu_drm_ops,
> > > > > > +	.load = arcpgu_load,
> > > > > > +	.unload = arcpgu_unload,
> > > > > Load and unload hooks are deprecated (it's a classic midlayer mistake).
> > > > > Please use drm_dev_alloc/register pairs directly instead, and put your
> > > > > device setup code in-between. Similar for unloading. There's a bunch of
> > > > > example drivers converted already.
> > > > Ok I took "atmel-hlcdc" as example.
> > > > And that's interesting.
> > > > 
> > > > If I put my arcpgu_load() in between drm_dev_alloc() and
> > > > drm_dev_register() then I'm getting this on the driver probe:
> > > > ---------------------------------->8-------------------------------
> > > > [drm] Initialized drm 1.1.0 20060810
> > > > arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
> > > > ------------[ cut here ]------------
> > > > WARNING: CPU: 0 PID: 1 at lib/kobject.c:244 kobject_add_internal+0x17c/0x498()
> > > > kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
> > > > Modules linked in:
> > > > CPU: 0 PID: 1 Comm: swapper Not tainted 4.5.0-rc3-01062-ga447822-dirty #17
> > > > 
> > > > Stack Trace:
> > > >   arc_unwind_core.constprop.1+0xa4/0x110
> > > >   warn_slowpath_fmt+0x6e/0xfc
> > > >   kobject_add_internal+0x17c/0x498
> > > >   kobject_add+0x98/0xe4
> > > >   device_add+0xc6/0x734
> > > >   device_create_with_groups+0x12a/0x144
> > > >   drm_sysfs_connector_add+0x54/0xe8
> > > >   arcpgu_drm_hdmi_init+0xd4/0x17c
> > > >   arcpgu_probe+0x138/0x24c
> > > >   platform_drv_probe+0x2e/0x6c
> > > >   really_probe+0x212/0x35c
> > > >   __driver_attach+0x90/0x94
> > > >   bus_for_each_dev+0x46/0x80
> > > >   bus_add_driver+0x14e/0x1b4
> > > >   driver_register+0x64/0x108
> > > >   do_one_initcall+0x86/0x194
> > > >   kernel_init_freeable+0xf0/0x188
> > > > ---[ end trace c67166ad43ddcce2 ]---
> > > > [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
> > > > [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
> > > > arcpgu e0017000.pgu: failed to regiter DRM connector and helper funcs
> > > > arcpgu: probe of e0017000.pgu failed with error -2
> > > > ---------------------------------->8-------------------------------
> > > > 
> > > > But if I move arcpgu_load() after drm_dev_register() then everything
> > > > starts properly and I may see HDMI screen works perfectly fine.
> > > > 
> > > > Any thoughts?
> > > Oops, yeah missed that detail. If you look at atmel it has a loop to
> > > register all the drm connectors _after_ calling drm_dev_register().
> > > Totally forgot about that. Can you pls
> > > - Extract a new drm_connector_register_all() function
> > >   (atmel_hlcdc_dc_connector_plug_all seems to be the best template),
> > >   including kerneldoc.
> > > - Adjust kerneldoc of drm_dev_register() to mention
> > >   drm_connector_register_all() and that ordering constraint.
> > > - Roll that helper out to all the drivers that currently hand-roll it (one
> > >   patch per driver).
> > > 
> > > I know a bit of work but imo not too much, and by doing some small
> > > refactoring every time someone stumbles over a drm pitfall we keep the
> > > subsystem clean&easy to understand. You're up for this? Would be a prep
> > > series, I'll happily review it to get it merged fast. Just a few weeks ago
> > > I merged 20+ patches to make ->mode_fixup hooks optional and remove dummy
> > > ones all over the subsystem, in other words: You'll have my full attention
> > > ;-)
> > Sure, I'm ready to pay that price :)
> > Stay tuned and patches will follow.
> Awesome, looking forward to your patches.

Sorry it took longer for me to finally put my hands on that work but anyways.

I'm looking now at how drivers use existing drm_connector_unplug_all() and
their implementation of what would be drm_connector_plug_all() and see
in some implementations people wraps both helpers with
mutex_{lock|unlock}(&dev->mode_config.mutex). But not everybody does this.

So essentially my questions are:
 [1] If it's necessary to get hold of that mutex before execution of either helper?
 [2] If this is really necessary then IMHO it makes sense to move mutex_lock/unlock
     in helpers itself, right?

-Alexey

Daniel Vetter March 18, 2016, 8:02 a.m. UTC | #7

On Thu, Mar 17, 2016 at 08:27:10PM +0000, Alexey Brodkin wrote:
> Hi Daniel,
> 
> On Tue, 2016-03-15 at 16:59 +0100, Daniel Vetter wrote:
> > On Tue, Mar 15, 2016 at 03:24:46PM +0000, Alexey Brodkin wrote:
> > > On Tue, 2016-03-15 at 09:10 +0100, Daniel Vetter wrote:
> > > > On Mon, Mar 14, 2016 at 11:15:59AM +0000, Alexey Brodkin wrote:
> > > > > On Mon, 2016-03-14 at 08:00 +0100, Daniel Vetter wrote:
> > > > > > On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> > > > > > > 
> > > > > > > +static struct drm_driver arcpgu_drm_driver = {
> > > > > > > +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> > > > > > > +			   DRIVER_ATOMIC,
> > > > > > > +	.preclose = arcpgu_preclose,
> > > > > > > +	.lastclose = arcpgu_lastclose,
> > > > > > > +	.name = "drm-arcpgu",
> > > > > > > +	.desc = "ARC PGU Controller",
> > > > > > > +	.date = "20160219",
> > > > > > > +	.major = 1,
> > > > > > > +	.minor = 0,
> > > > > > > +	.patchlevel = 0,
> > > > > > > +	.fops = &arcpgu_drm_ops,
> > > > > > > +	.load = arcpgu_load,
> > > > > > > +	.unload = arcpgu_unload,
> > > > > > Load and unload hooks are deprecated (it's a classic midlayer mistake).
> > > > > > Please use drm_dev_alloc/register pairs directly instead, and put your
> > > > > > device setup code in-between. Similar for unloading. There's a bunch of
> > > > > > example drivers converted already.
> > > > > Ok I took "atmel-hlcdc" as example.
> > > > > And that's interesting.
> > > > > 
> > > > > If I put my arcpgu_load() in between drm_dev_alloc() and
> > > > > drm_dev_register() then I'm getting this on the driver probe:
> > > > > ---------------------------------->8-------------------------------
> > > > > [drm] Initialized drm 1.1.0 20060810
> > > > > arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
> > > > > ------------[ cut here ]------------
> > > > > WARNING: CPU: 0 PID: 1 at lib/kobject.c:244 kobject_add_internal+0x17c/0x498()
> > > > > kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
> > > > > Modules linked in:
> > > > > CPU: 0 PID: 1 Comm: swapper Not tainted 4.5.0-rc3-01062-ga447822-dirty #17
> > > > > 
> > > > > Stack Trace:
> > > > >   arc_unwind_core.constprop.1+0xa4/0x110
> > > > >   warn_slowpath_fmt+0x6e/0xfc
> > > > >   kobject_add_internal+0x17c/0x498
> > > > >   kobject_add+0x98/0xe4
> > > > >   device_add+0xc6/0x734
> > > > >   device_create_with_groups+0x12a/0x144
> > > > >   drm_sysfs_connector_add+0x54/0xe8
> > > > >   arcpgu_drm_hdmi_init+0xd4/0x17c
> > > > >   arcpgu_probe+0x138/0x24c
> > > > >   platform_drv_probe+0x2e/0x6c
> > > > >   really_probe+0x212/0x35c
> > > > >   __driver_attach+0x90/0x94
> > > > >   bus_for_each_dev+0x46/0x80
> > > > >   bus_add_driver+0x14e/0x1b4
> > > > >   driver_register+0x64/0x108
> > > > >   do_one_initcall+0x86/0x194
> > > > >   kernel_init_freeable+0xf0/0x188
> > > > > ---[ end trace c67166ad43ddcce2 ]---
> > > > > [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
> > > > > [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
> > > > > arcpgu e0017000.pgu: failed to regiter DRM connector and helper funcs
> > > > > arcpgu: probe of e0017000.pgu failed with error -2
> > > > > ---------------------------------->8-------------------------------
> > > > > 
> > > > > But if I move arcpgu_load() after drm_dev_register() then everything
> > > > > starts properly and I may see HDMI screen works perfectly fine.
> > > > > 
> > > > > Any thoughts?
> > > > Oops, yeah missed that detail. If you look at atmel it has a loop to
> > > > register all the drm connectors _after_ calling drm_dev_register().
> > > > Totally forgot about that. Can you pls
> > > > - Extract a new drm_connector_register_all() function
> > > >   (atmel_hlcdc_dc_connector_plug_all seems to be the best template),
> > > >   including kerneldoc.
> > > > - Adjust kerneldoc of drm_dev_register() to mention
> > > >   drm_connector_register_all() and that ordering constraint.
> > > > - Roll that helper out to all the drivers that currently hand-roll it (one
> > > >   patch per driver).
> > > > 
> > > > I know a bit of work but imo not too much, and by doing some small
> > > > refactoring every time someone stumbles over a drm pitfall we keep the
> > > > subsystem clean&easy to understand. You're up for this? Would be a prep
> > > > series, I'll happily review it to get it merged fast. Just a few weeks ago
> > > > I merged 20+ patches to make ->mode_fixup hooks optional and remove dummy
> > > > ones all over the subsystem, in other words: You'll have my full attention
> > > > ;-)
> > > Sure, I'm ready to pay that price :)
> > > Stay tuned and patches will follow.
> > Awesome, looking forward to your patches.
> 
> Sorry it took longer for me to finally put my hands on that work but anyways.
> 
> I'm looking now at how drivers use existing drm_connector_unplug_all() and
> their implementation of what would be drm_connector_plug_all() and see
> in some implementations people wraps both helpers with
> mutex_{lock|unlock}(&dev->mode_config.mutex). But not everybody does this.
> 
> So essentially my questions are:
>  [1] If it's necessary to get hold of that mutex before execution of either helper?

In plug_all I think so, unplug_all has a FIXME comment about how locking
against sysfs is horrible and it's all going to blow up. But we did
recently change the connector sysfs files, so maybe that's fixed now. Not
sure.

>  [2] If this is really necessary then IMHO it makes sense to move mutex_lock/unlock
>      in helpers itself, right?

Yeah, locking in the helper makes imo sense. Aside: I'd vote for
register_all/unregister_all for consistency with drm_connector_register.
register/unregister has a very clear meaning of "publish the object to
userspace/other kernel subsystems". plug/unplug is confusing in DRM
because of hotplug.
-Daniel

Alexey Brodkin March 18, 2016, 8:11 a.m. UTC | #8

Hi Daniel,

On Fri, 2016-03-18 at 09:02 +0100, Daniel Vetter wrote:
> On Thu, Mar 17, 2016 at 08:27:10PM +0000, Alexey Brodkin wrote:
> > 
> > Hi Daniel,
> > 
> > On Tue, 2016-03-15 at 16:59 +0100, Daniel Vetter wrote:
> > > 
> > > On Tue, Mar 15, 2016 at 03:24:46PM +0000, Alexey Brodkin wrote:
> > > > 
> > > > On Tue, 2016-03-15 at 09:10 +0100, Daniel Vetter wrote:
> > > > > 
> > > > > On Mon, Mar 14, 2016 at 11:15:59AM +0000, Alexey Brodkin wrote:
> > > > > > 
> > > > > > On Mon, 2016-03-14 at 08:00 +0100, Daniel Vetter wrote:
> > > > > > > 
> > > > > > > On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> > > > > > > > 
> > > > > > > >  
> > > > > > > > +static struct drm_driver arcpgu_drm_driver = {
> > > > > > > > +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> > > > > > > > +			   DRIVER_ATOMIC,
> > > > > > > > +	.preclose = arcpgu_preclose,
> > > > > > > > +	.lastclose = arcpgu_lastclose,
> > > > > > > > +	.name = "drm-arcpgu",
> > > > > > > > +	.desc = "ARC PGU Controller",
> > > > > > > > +	.date = "20160219",
> > > > > > > > +	.major = 1,
> > > > > > > > +	.minor = 0,
> > > > > > > > +	.patchlevel = 0,
> > > > > > > > +	.fops = &arcpgu_drm_ops,
> > > > > > > > +	.load = arcpgu_load,
> > > > > > > > +	.unload = arcpgu_unload,
> > > > > > > Load and unload hooks are deprecated (it's a classic midlayer mistake).
> > > > > > > Please use drm_dev_alloc/register pairs directly instead, and put your
> > > > > > > device setup code in-between. Similar for unloading. There's a bunch of
> > > > > > > example drivers converted already.
> > > > > > Ok I took "atmel-hlcdc" as example.
> > > > > > And that's interesting.
> > > > > > 
> > > > > > If I put my arcpgu_load() in between drm_dev_alloc() and
> > > > > > drm_dev_register() then I'm getting this on the driver probe:
> > > > > > ---------------------------------->8-------------------------------
> > > > > > [drm] Initialized drm 1.1.0 20060810
> > > > > > arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
> > > > > > ------------[ cut here ]------------
> > > > > > WARNING: CPU: 0 PID: 1 at lib/kobject.c:244 kobject_add_internal+0x17c/0x498()
> > > > > > kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
> > > > > > Modules linked in:
> > > > > > CPU: 0 PID: 1 Comm: swapper Not tainted 4.5.0-rc3-01062-ga447822-dirty #17
> > > > > > 
> > > > > > Stack Trace:
> > > > > >   arc_unwind_core.constprop.1+0xa4/0x110
> > > > > >   warn_slowpath_fmt+0x6e/0xfc
> > > > > >   kobject_add_internal+0x17c/0x498
> > > > > >   kobject_add+0x98/0xe4
> > > > > >   device_add+0xc6/0x734
> > > > > >   device_create_with_groups+0x12a/0x144
> > > > > >   drm_sysfs_connector_add+0x54/0xe8
> > > > > >   arcpgu_drm_hdmi_init+0xd4/0x17c
> > > > > >   arcpgu_probe+0x138/0x24c
> > > > > >   platform_drv_probe+0x2e/0x6c
> > > > > >   really_probe+0x212/0x35c
> > > > > >   __driver_attach+0x90/0x94
> > > > > >   bus_for_each_dev+0x46/0x80
> > > > > >   bus_add_driver+0x14e/0x1b4
> > > > > >   driver_register+0x64/0x108
> > > > > >   do_one_initcall+0x86/0x194
> > > > > >   kernel_init_freeable+0xf0/0x188
> > > > > > ---[ end trace c67166ad43ddcce2 ]---
> > > > > > [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
> > > > > > [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
> > > > > > arcpgu e0017000.pgu: failed to regiter DRM connector and helper funcs
> > > > > > arcpgu: probe of e0017000.pgu failed with error -2
> > > > > > ---------------------------------->8-------------------------------
> > > > > > 
> > > > > > But if I move arcpgu_load() after drm_dev_register() then everything
> > > > > > starts properly and I may see HDMI screen works perfectly fine.
> > > > > > 
> > > > > > Any thoughts?
> > > > > Oops, yeah missed that detail. If you look at atmel it has a loop to
> > > > > register all the drm connectors _after_ calling drm_dev_register().
> > > > > Totally forgot about that. Can you pls
> > > > > - Extract a new drm_connector_register_all() function
> > > > >   (atmel_hlcdc_dc_connector_plug_all seems to be the best template),
> > > > >   including kerneldoc.
> > > > > - Adjust kerneldoc of drm_dev_register() to mention
> > > > >   drm_connector_register_all() and that ordering constraint.
> > > > > - Roll that helper out to all the drivers that currently hand-roll it (one
> > > > >   patch per driver).
> > > > > 
> > > > > I know a bit of work but imo not too much, and by doing some small
> > > > > refactoring every time someone stumbles over a drm pitfall we keep the
> > > > > subsystem clean&easy to understand. You're up for this? Would be a prep
> > > > > series, I'll happily review it to get it merged fast. Just a few weeks ago
> > > > > I merged 20+ patches to make ->mode_fixup hooks optional and remove dummy
> > > > > ones all over the subsystem, in other words: You'll have my full attention
> > > > > ;-)
> > > > Sure, I'm ready to pay that price :)
> > > > Stay tuned and patches will follow.
> > > Awesome, looking forward to your patches.
> > Sorry it took longer for me to finally put my hands on that work but anyways.
> > 
> > I'm looking now at how drivers use existing drm_connector_unplug_all() and
> > their implementation of what would be drm_connector_plug_all() and see
> > in some implementations people wraps both helpers with
> > mutex_{lock|unlock}(&dev->mode_config.mutex). But not everybody does this.
> > 
> > So essentially my questions are:
> >  [1] If it's necessary to get hold of that mutex before execution of either helper?
> In plug_all I think so, unplug_all has a FIXME comment about how locking
> against sysfs is horrible and it's all going to blow up. But we did
> recently change the connector sysfs files, so maybe that's fixed now. Not
> sure.
>
> >  [2] If this is really necessary then IMHO it makes sense to move mutex_lock/unlock
> >      in helpers itself, right?
> Yeah, locking in the helper makes imo sense.

Hm, now I'm even more confused :)
Above you're not sure if this locking is safe (at least on unplug) but here you say
it makes sense (not mentioning the case - both helpers or only on "plugging").

I may indeed try to embed mutex locks in both helpers but what if it works for me but
others will get broken stuff?

> Aside: I'd vote for
> register_all/unregister_all for consistency with drm_connector_register.
> register/unregister has a very clear meaning of "publish the object to
> userspace/other kernel subsystems". plug/unplug is confusing in DRM
> because of hotplug.

Well but what should happen to existing unplug() then?
Should I rename it to unregister_all() in the same change?

-Alexey

Daniel Vetter March 18, 2016, 5:23 p.m. UTC | #9

On Fri, Mar 18, 2016 at 08:11:49AM +0000, Alexey Brodkin wrote:
> Hi Daniel,
> 
> On Fri, 2016-03-18 at 09:02 +0100, Daniel Vetter wrote:
> > On Thu, Mar 17, 2016 at 08:27:10PM +0000, Alexey Brodkin wrote:
> > > 
> > > Hi Daniel,
> > > 
> > > On Tue, 2016-03-15 at 16:59 +0100, Daniel Vetter wrote:
> > > > 
> > > > On Tue, Mar 15, 2016 at 03:24:46PM +0000, Alexey Brodkin wrote:
> > > > > 
> > > > > On Tue, 2016-03-15 at 09:10 +0100, Daniel Vetter wrote:
> > > > > > 
> > > > > > On Mon, Mar 14, 2016 at 11:15:59AM +0000, Alexey Brodkin wrote:
> > > > > > > 
> > > > > > > On Mon, 2016-03-14 at 08:00 +0100, Daniel Vetter wrote:
> > > > > > > > 
> > > > > > > > On Fri, Mar 11, 2016 at 06:42:36PM +0300, Alexey Brodkin wrote:
> > > > > > > > > 
> > > > > > > > >  
> > > > > > > > > +static struct drm_driver arcpgu_drm_driver = {
> > > > > > > > > +	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
> > > > > > > > > +			   DRIVER_ATOMIC,
> > > > > > > > > +	.preclose = arcpgu_preclose,
> > > > > > > > > +	.lastclose = arcpgu_lastclose,
> > > > > > > > > +	.name = "drm-arcpgu",
> > > > > > > > > +	.desc = "ARC PGU Controller",
> > > > > > > > > +	.date = "20160219",
> > > > > > > > > +	.major = 1,
> > > > > > > > > +	.minor = 0,
> > > > > > > > > +	.patchlevel = 0,
> > > > > > > > > +	.fops = &arcpgu_drm_ops,
> > > > > > > > > +	.load = arcpgu_load,
> > > > > > > > > +	.unload = arcpgu_unload,
> > > > > > > > Load and unload hooks are deprecated (it's a classic midlayer mistake).
> > > > > > > > Please use drm_dev_alloc/register pairs directly instead, and put your
> > > > > > > > device setup code in-between. Similar for unloading. There's a bunch of
> > > > > > > > example drivers converted already.
> > > > > > > Ok I took "atmel-hlcdc" as example.
> > > > > > > And that's interesting.
> > > > > > > 
> > > > > > > If I put my arcpgu_load() in between drm_dev_alloc() and
> > > > > > > drm_dev_register() then I'm getting this on the driver probe:
> > > > > > > ---------------------------------->8-------------------------------
> > > > > > > [drm] Initialized drm 1.1.0 20060810
> > > > > > > arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab
> > > > > > > ------------[ cut here ]------------
> > > > > > > WARNING: CPU: 0 PID: 1 at lib/kobject.c:244 kobject_add_internal+0x17c/0x498()
> > > > > > > kobject_add_internal failed for card0-HDMI-A-1 (error: -2 parent: card0)
> > > > > > > Modules linked in:
> > > > > > > CPU: 0 PID: 1 Comm: swapper Not tainted 4.5.0-rc3-01062-ga447822-dirty #17
> > > > > > > 
> > > > > > > Stack Trace:
> > > > > > >   arc_unwind_core.constprop.1+0xa4/0x110
> > > > > > >   warn_slowpath_fmt+0x6e/0xfc
> > > > > > >   kobject_add_internal+0x17c/0x498
> > > > > > >   kobject_add+0x98/0xe4
> > > > > > >   device_add+0xc6/0x734
> > > > > > >   device_create_with_groups+0x12a/0x144
> > > > > > >   drm_sysfs_connector_add+0x54/0xe8
> > > > > > >   arcpgu_drm_hdmi_init+0xd4/0x17c
> > > > > > >   arcpgu_probe+0x138/0x24c
> > > > > > >   platform_drv_probe+0x2e/0x6c
> > > > > > >   really_probe+0x212/0x35c
> > > > > > >   __driver_attach+0x90/0x94
> > > > > > >   bus_for_each_dev+0x46/0x80
> > > > > > >   bus_add_driver+0x14e/0x1b4
> > > > > > >   driver_register+0x64/0x108
> > > > > > >   do_one_initcall+0x86/0x194
> > > > > > >   kernel_init_freeable+0xf0/0x188
> > > > > > > ---[ end trace c67166ad43ddcce2 ]---
> > > > > > > [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
> > > > > > > [drm:drm_sysfs_connector_add] *ERROR* failed to register connector device: -2
> > > > > > > arcpgu e0017000.pgu: failed to regiter DRM connector and helper funcs
> > > > > > > arcpgu: probe of e0017000.pgu failed with error -2
> > > > > > > ---------------------------------->8-------------------------------
> > > > > > > 
> > > > > > > But if I move arcpgu_load() after drm_dev_register() then everything
> > > > > > > starts properly and I may see HDMI screen works perfectly fine.
> > > > > > > 
> > > > > > > Any thoughts?
> > > > > > Oops, yeah missed that detail. If you look at atmel it has a loop to
> > > > > > register all the drm connectors _after_ calling drm_dev_register().
> > > > > > Totally forgot about that. Can you pls
> > > > > > - Extract a new drm_connector_register_all() function
> > > > > >   (atmel_hlcdc_dc_connector_plug_all seems to be the best template),
> > > > > >   including kerneldoc.
> > > > > > - Adjust kerneldoc of drm_dev_register() to mention
> > > > > >   drm_connector_register_all() and that ordering constraint.
> > > > > > - Roll that helper out to all the drivers that currently hand-roll it (one
> > > > > >   patch per driver).
> > > > > > 
> > > > > > I know a bit of work but imo not too much, and by doing some small
> > > > > > refactoring every time someone stumbles over a drm pitfall we keep the
> > > > > > subsystem clean&easy to understand. You're up for this? Would be a prep
> > > > > > series, I'll happily review it to get it merged fast. Just a few weeks ago
> > > > > > I merged 20+ patches to make ->mode_fixup hooks optional and remove dummy
> > > > > > ones all over the subsystem, in other words: You'll have my full attention
> > > > > > ;-)
> > > > > Sure, I'm ready to pay that price :)
> > > > > Stay tuned and patches will follow.
> > > > Awesome, looking forward to your patches.
> > > Sorry it took longer for me to finally put my hands on that work but anyways.
> > > 
> > > I'm looking now at how drivers use existing drm_connector_unplug_all() and
> > > their implementation of what would be drm_connector_plug_all() and see
> > > in some implementations people wraps both helpers with
> > > mutex_{lock|unlock}(&dev->mode_config.mutex). But not everybody does this.
> > > 
> > > So essentially my questions are:
> > >  [1] If it's necessary to get hold of that mutex before execution of either helper?
> > In plug_all I think so, unplug_all has a FIXME comment about how locking
> > against sysfs is horrible and it's all going to blow up. But we did
> > recently change the connector sysfs files, so maybe that's fixed now. Not
> > sure.
> >
> > >  [2] If this is really necessary then IMHO it makes sense to move mutex_lock/unlock
> > >      in helpers itself, right?
> > Yeah, locking in the helper makes imo sense.
> 
> Hm, now I'm even more confused :)
> Above you're not sure if this locking is safe (at least on unplug) but here you say
> it makes sense (not mentioning the case - both helpers or only on "plugging").
> 
> I may indeed try to embed mutex locks in both helpers but what if it works for me but
> others will get broken stuff?

Sorry, I meant only embed it it for register_all. And keep the FIXME
comment for unregister_all (well unplug_all as it's called still). Fixing
up sysfs vs. mode_config.mutex is a lot more work than just this.

> > Aside: I'd vote for
> > register_all/unregister_all for consistency with drm_connector_register.
> > register/unregister has a very clear meaning of "publish the object to
> > userspace/other kernel subsystems". plug/unplug is confusing in DRM
> > because of hotplug.
> 
> Well but what should happen to existing unplug() then?
> Should I rename it to unregister_all() in the same change?

Yes, that's what I'd do. I think that's clearer, if we go with a strict
distinction between register/unregister and hotplug handling.
-Daniel

Patch

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index f2a74d0..9e4f2f1 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -281,3 +281,5 @@  source "drivers/gpu/drm/imx/Kconfig"
 source "drivers/gpu/drm/vc4/Kconfig"
 
 source "drivers/gpu/drm/etnaviv/Kconfig"
+
+source "drivers/gpu/drm/arc/Kconfig"
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 6eb94fc..c338d04 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -78,3 +78,4 @@  obj-y			+= panel/
 obj-y			+= bridge/
 obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/
 obj-$(CONFIG_DRM_ETNAVIV) += etnaviv/
+obj-$(CONFIG_DRM_ARCPGU)+= arc/
diff --git a/drivers/gpu/drm/arc/Kconfig b/drivers/gpu/drm/arc/Kconfig
new file mode 100644
index 0000000..f9a13b6
--- /dev/null
+++ b/drivers/gpu/drm/arc/Kconfig
@@ -0,0 +1,10 @@ 
+config DRM_ARCPGU
+	tristate "ARC PGU"
+	depends on DRM && OF
+	select DRM_KMS_CMA_HELPER
+	select DRM_KMS_FB_HELPER
+	select DRM_KMS_HELPER
+	help
+	  Choose this option if you have an ARC PGU controller.
+
+	  If M is selected the module will be called arcpgu.
diff --git a/drivers/gpu/drm/arc/Makefile b/drivers/gpu/drm/arc/Makefile
new file mode 100644
index 0000000..736ee6f
--- /dev/null
+++ b/drivers/gpu/drm/arc/Makefile
@@ -0,0 +1,2 @@ 
+arcpgu-y := arcpgu_crtc.o arcpgu_hdmi.o arcpgu_fbdev.o arcpgu_drv.o
+obj-$(CONFIG_DRM_ARCPGU) += arcpgu.o
diff --git a/drivers/gpu/drm/arc/arcpgu.h b/drivers/gpu/drm/arc/arcpgu.h
new file mode 100644
index 0000000..86574b6
--- /dev/null
+++ b/drivers/gpu/drm/arc/arcpgu.h
@@ -0,0 +1,50 @@ 
+/*
+ * ARC PGU DRM driver.
+ *
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _ARCPGU_H_
+#define _ARCPGU_H_
+
+struct arcpgu_drm_private {
+	void __iomem		*regs;
+	struct clk		*clk;
+	struct drm_fbdev_cma	*fbdev;
+	struct drm_framebuffer	*fb;
+	struct list_head	event_list;
+	struct drm_crtc		crtc;
+	struct drm_plane	*plane;
+};
+
+#define crtc_to_arcpgu_priv(x) container_of(x, struct arcpgu_drm_private, crtc)
+
+static inline void arc_pgu_write(struct arcpgu_drm_private *arcpgu,
+				 unsigned int reg, u32 value)
+{
+	iowrite32(value, arcpgu->regs + reg);
+}
+
+static inline u32 arc_pgu_read(struct arcpgu_drm_private *arcpgu,
+			       unsigned int reg)
+{
+	return ioread32(arcpgu->regs + reg);
+}
+
+int arc_pgu_setup_crtc(struct drm_device *dev);
+int arcpgu_drm_hdmi_init(struct drm_device *drm, struct device_node *np);
+struct drm_fbdev_cma *arcpgu_fbdev_cma_init(struct drm_device *dev,
+	unsigned int preferred_bpp, unsigned int num_crtc,
+	unsigned int max_conn_count);
+
+#endif
diff --git a/drivers/gpu/drm/arc/arcpgu_crtc.c b/drivers/gpu/drm/arc/arcpgu_crtc.c
new file mode 100644
index 0000000..0fe5c8a
--- /dev/null
+++ b/drivers/gpu/drm/arc/arcpgu_crtc.c
@@ -0,0 +1,274 @@ 
+/*
+ * ARC PGU DRM driver.
+ *
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <linux/clk.h>
+#include <linux/platform_data/simplefb.h>
+
+#include "arcpgu.h"
+#include "arcpgu_regs.h"
+
+#define ENCODE_PGU_XY(x, y)	((((x) - 1) << 16) | ((y) - 1))
+
+static struct simplefb_format supported_formats[] = {
+	{ "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0}, DRM_FORMAT_RGB565 },
+	{ "r8g8b8", 24, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_RGB888 },
+};
+
+static void arc_pgu_set_pxl_fmt(struct drm_crtc *crtc)
+{
+	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
+	uint32_t pixel_format = crtc->primary->state->fb->pixel_format;
+	struct simplefb_format *format = NULL;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(supported_formats); i++) {
+		if (supported_formats[i].fourcc == pixel_format)
+			format = &supported_formats[i];
+	}
+
+	if (WARN_ON(!format))
+		return;
+
+	if (format->fourcc == DRM_FORMAT_RGB888)
+		arc_pgu_write(arcpgu, ARCPGU_REG_CTRL,
+			      arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) |
+					   ARCPGU_MODE_RGB888_MASK);
+
+}
+
+static const struct drm_crtc_funcs arc_pgu_crtc_funcs = {
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static void arc_pgu_crtc_mode_set_nofb(struct drm_crtc *crtc)
+{
+	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
+	struct drm_display_mode *m = &crtc->state->adjusted_mode;
+
+	arc_pgu_write(arcpgu, ARCPGU_REG_FMT,
+		      ENCODE_PGU_XY(m->crtc_htotal, m->crtc_vtotal));
+
+	arc_pgu_write(arcpgu, ARCPGU_REG_HSYNC,
+		      ENCODE_PGU_XY(m->crtc_hsync_start - m->crtc_hdisplay,
+				    m->crtc_hsync_end - m->crtc_hdisplay));
+
+	arc_pgu_write(arcpgu, ARCPGU_REG_VSYNC,
+		      ENCODE_PGU_XY(m->crtc_vsync_start - m->crtc_vdisplay,
+				    m->crtc_vsync_end - m->crtc_vdisplay));
+
+	arc_pgu_write(arcpgu, ARCPGU_REG_ACTIVE,
+		      ENCODE_PGU_XY(m->crtc_hblank_end - m->crtc_hblank_start,
+				    m->crtc_vblank_end - m->crtc_vblank_start));
+
+	arc_pgu_write(arcpgu, ARCPGU_REG_STRIDE, 0);
+	arc_pgu_write(arcpgu, ARCPGU_REG_START_SET, 1);
+
+	arc_pgu_set_pxl_fmt(crtc);
+
+	clk_set_rate(arcpgu->clk, m->crtc_clock * 1000);
+}
+
+static void arc_pgu_crtc_enable(struct drm_crtc *crtc)
+{
+	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
+
+	clk_prepare_enable(arcpgu->clk);
+	arc_pgu_write(arcpgu, ARCPGU_REG_CTRL,
+		      arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) |
+		      ARCPGU_CTRL_ENABLE_MASK);
+}
+
+static void arc_pgu_crtc_disable(struct drm_crtc *crtc)
+{
+	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
+
+	if (!crtc->primary->fb)
+		return;
+
+	clk_disable_unprepare(arcpgu->clk);
+	arc_pgu_write(arcpgu, ARCPGU_REG_CTRL,
+			      arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) &
+			      ~ARCPGU_CTRL_ENABLE_MASK);
+}
+
+static int arc_pgu_crtc_atomic_check(struct drm_crtc *crtc,
+				     struct drm_crtc_state *state)
+{
+	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
+	struct drm_display_mode *mode = &state->adjusted_mode;
+	long rate, clk_rate = mode->clock * 1000;
+
+	rate = clk_round_rate(arcpgu->clk, clk_rate);
+	if (rate != clk_rate)
+		return -EINVAL;
+
+	return 0;
+}
+
+static void arc_pgu_crtc_atomic_begin(struct drm_crtc *crtc,
+				      struct drm_crtc_state *state)
+{
+	struct arcpgu_drm_private *arcpgu = crtc_to_arcpgu_priv(crtc);
+	unsigned long flags;
+
+	if (crtc->state->event) {
+		struct drm_pending_vblank_event *event = crtc->state->event;
+
+		crtc->state->event = NULL;
+		event->pipe = drm_crtc_index(crtc);
+
+		WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+		spin_lock_irqsave(&crtc->dev->event_lock, flags);
+		list_add_tail(&event->base.link, &arcpgu->event_list);
+		spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+	}
+}
+
+static void arc_pgu_crtc_atomic_flush(struct drm_crtc *crtc,
+				      struct drm_crtc_state *state)
+{
+}
+
+static bool arc_pgu_crtc_mode_fixup(struct drm_crtc *crtc,
+				    const struct drm_display_mode *mode,
+				    struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static const struct drm_crtc_helper_funcs arc_pgu_crtc_helper_funcs = {
+	.mode_fixup	= arc_pgu_crtc_mode_fixup,
+	.mode_set	= drm_helper_crtc_mode_set,
+	.mode_set_base	= drm_helper_crtc_mode_set_base,
+	.mode_set_nofb	= arc_pgu_crtc_mode_set_nofb,
+	.enable		= arc_pgu_crtc_enable,
+	.disable	= arc_pgu_crtc_disable,
+	.prepare	= arc_pgu_crtc_disable,
+	.commit		= arc_pgu_crtc_enable,
+	.atomic_check	= arc_pgu_crtc_atomic_check,
+	.atomic_begin	= arc_pgu_crtc_atomic_begin,
+	.atomic_flush	= arc_pgu_crtc_atomic_flush,
+};
+
+static int arc_pgu_plane_atomic_check(struct drm_plane *plane,
+				      struct drm_plane_state *state)
+{
+	return 0;
+}
+
+static void arc_pgu_plane_atomic_update(struct drm_plane *plane,
+					struct drm_plane_state *state)
+{
+	struct arcpgu_drm_private *arcpgu;
+	struct drm_gem_cma_object *gem;
+
+	if (!plane->state->crtc || !plane->state->fb)
+		return;
+
+	arcpgu = crtc_to_arcpgu_priv(plane->state->crtc);
+	gem = drm_fb_cma_get_gem_obj(plane->state->fb, 0);
+	arc_pgu_write(arcpgu, ARCPGU_REG_BUF0_ADDR, gem->paddr);
+}
+
+static const struct drm_plane_helper_funcs arc_pgu_plane_helper_funcs = {
+	.prepare_fb = NULL,
+	.cleanup_fb = NULL,
+	.atomic_check = arc_pgu_plane_atomic_check,
+	.atomic_update = arc_pgu_plane_atomic_update,
+};
+
+static void arc_pgu_plane_destroy(struct drm_plane *plane)
+{
+	drm_plane_helper_disable(plane);
+	drm_plane_cleanup(plane);
+}
+
+static const struct drm_plane_funcs arc_pgu_plane_funcs = {
+	.update_plane		= drm_atomic_helper_update_plane,
+	.disable_plane		= drm_atomic_helper_disable_plane,
+	.destroy		= arc_pgu_plane_destroy,
+	.reset			= drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
+};
+
+static struct drm_plane *arc_pgu_plane_init(struct drm_device *drm)
+{
+	struct arcpgu_drm_private *arcpgu = drm->dev_private;
+	struct drm_plane *plane = NULL;
+	u32 formats[ARRAY_SIZE(supported_formats)], i;
+	int ret;
+
+	plane = devm_kzalloc(drm->dev, sizeof(*plane), GFP_KERNEL);
+	if (!plane)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < ARRAY_SIZE(supported_formats); i++)
+		formats[i] = supported_formats[i].fourcc;
+
+	ret = drm_universal_plane_init(drm, plane, 0xff, &arc_pgu_plane_funcs,
+				       formats, ARRAY_SIZE(formats),
+				       DRM_PLANE_TYPE_PRIMARY, NULL);
+	if (ret)
+		return ERR_PTR(ret);
+
+	drm_plane_helper_add(plane, &arc_pgu_plane_helper_funcs);
+	arcpgu->plane = plane;
+
+	return plane;
+}
+
+void arc_pgu_crtc_suspend(struct drm_crtc *crtc)
+{
+	arc_pgu_crtc_disable(crtc);
+}
+
+void arc_pgu_crtc_resume(struct drm_crtc *crtc)
+{
+	arc_pgu_crtc_enable(crtc);
+}
+
+int arc_pgu_setup_crtc(struct drm_device *drm)
+{
+	struct arcpgu_drm_private *arcpgu = drm->dev_private;
+	struct drm_plane *primary;
+	int ret;
+
+	primary = arc_pgu_plane_init(drm);
+	if (IS_ERR(primary))
+		return PTR_ERR(primary);
+
+	ret = drm_crtc_init_with_planes(drm, &arcpgu->crtc, primary, NULL,
+					&arc_pgu_crtc_funcs, NULL);
+	if (ret) {
+		arc_pgu_plane_destroy(primary);
+		return ret;
+	}
+
+	drm_crtc_helper_add(&arcpgu->crtc, &arc_pgu_crtc_helper_funcs);
+	return 0;
+}
diff --git a/drivers/gpu/drm/arc/arcpgu_drv.c b/drivers/gpu/drm/arc/arcpgu_drv.c
new file mode 100644
index 0000000..d47481d
--- /dev/null
+++ b/drivers/gpu/drm/arc/arcpgu_drv.c
@@ -0,0 +1,252 @@ 
+/*
+ * ARC PGU DRM driver.
+ *
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_atomic_helper.h>
+
+#include "arcpgu.h"
+#include "arcpgu_regs.h"
+
+static void arcpgu_fb_output_poll_changed(struct drm_device *dev)
+{
+	struct arcpgu_drm_private *arcpgu = dev->dev_private;
+
+	if (arcpgu->fbdev)
+		drm_fbdev_cma_hotplug_event(arcpgu->fbdev);
+}
+
+static int arcpgu_atomic_commit(struct drm_device *dev,
+				    struct drm_atomic_state *state, bool async)
+{
+	return drm_atomic_helper_commit(dev, state, false);
+}
+
+static struct drm_mode_config_funcs arcpgu_drm_modecfg_funcs = {
+	.fb_create  = drm_fb_cma_create,
+	.output_poll_changed = arcpgu_fb_output_poll_changed,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = arcpgu_atomic_commit,
+};
+
+static void arcpgu_setup_mode_config(struct drm_device *drm)
+{
+	drm_mode_config_init(drm);
+	drm->mode_config.min_width = 0;
+	drm->mode_config.min_height = 0;
+	drm->mode_config.max_width = 1920;
+	drm->mode_config.max_height = 1080;
+	drm->mode_config.funcs = &arcpgu_drm_modecfg_funcs;
+}
+
+int arcpgu_gem_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	int ret;
+
+	ret = drm_gem_mmap(filp, vma);
+	if (ret)
+		return ret;
+
+	vma->vm_page_prot = pgprot_noncached(vm_get_page_prot(vma->vm_flags));
+	return 0;
+}
+
+static const struct file_operations arcpgu_drm_ops = {
+	.owner = THIS_MODULE,
+	.open = drm_open,
+	.release = drm_release,
+	.unlocked_ioctl = drm_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl = drm_compat_ioctl,
+#endif
+	.poll = drm_poll,
+	.read = drm_read,
+	.llseek = no_llseek,
+	.mmap = arcpgu_gem_mmap,
+};
+
+static void arcpgu_preclose(struct drm_device *drm, struct drm_file *file)
+{
+	struct arcpgu_drm_private *arcpgu = drm->dev_private;
+	struct drm_pending_vblank_event *e, *t;
+	unsigned long flags;
+
+	spin_lock_irqsave(&drm->event_lock, flags);
+	list_for_each_entry_safe(e, t, &arcpgu->event_list, base.link) {
+		if (e->base.file_priv != file)
+			continue;
+		list_del(&e->base.link);
+		e->base.destroy(&e->base);
+	}
+	spin_unlock_irqrestore(&drm->event_lock, flags);
+}
+
+static void arcpgu_lastclose(struct drm_device *drm)
+{
+	struct arcpgu_drm_private *arcpgu = drm->dev_private;
+
+	drm_fbdev_cma_restore_mode(arcpgu->fbdev);
+}
+
+static int arcpgu_load(struct drm_device *drm, unsigned long flags)
+{
+	struct platform_device *pdev = drm->platformdev;
+	struct arcpgu_drm_private *arcpgu;
+	struct device_node *encoder_node;
+	struct resource *res;
+	int ret;
+
+	arcpgu = devm_kzalloc(&pdev->dev, sizeof(*arcpgu), GFP_KERNEL);
+	if (arcpgu == NULL)
+		return -ENOMEM;
+
+	drm->dev_private = arcpgu;
+
+	arcpgu->clk = devm_clk_get(drm->dev, "pxlclk");
+	if (IS_ERR(arcpgu->clk))
+		return PTR_ERR(arcpgu->clk);
+
+	INIT_LIST_HEAD(&arcpgu->event_list);
+
+	arcpgu_setup_mode_config(drm);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	arcpgu->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(arcpgu->regs)) {
+		dev_err(drm->dev, "Could not remap IO mem\n");
+		return PTR_ERR(arcpgu->regs);
+	}
+
+	dev_info(drm->dev, "arc_pgu ID: 0x%x\n",
+		 arc_pgu_read(arcpgu, ARCPGU_REG_ID));
+
+	if (dma_set_mask_and_coherent(drm->dev, DMA_BIT_MASK(32)))
+		return -ENODEV;
+
+	if (arc_pgu_setup_crtc(drm) < 0)
+		return -ENODEV;
+
+	/* find the encoder node and initialize it */
+	encoder_node = of_parse_phandle(drm->dev->of_node, "encoder-slave", 0);
+	if (!encoder_node) {
+		dev_err(drm->dev, "failed to get an encoder slave node\n");
+		return -ENODEV;
+	}
+
+	ret = arcpgu_drm_hdmi_init(drm, encoder_node);
+	if (ret < 0)
+		return ret;
+
+	drm_mode_config_reset(drm);
+	drm_kms_helper_poll_init(drm);
+
+	arcpgu->fbdev = arcpgu_fbdev_cma_init(drm, 16,
+					      drm->mode_config.num_crtc,
+					      drm->mode_config.num_connector);
+	if (IS_ERR(arcpgu->fbdev)) {
+		ret = PTR_ERR(arcpgu->fbdev);
+		arcpgu->fbdev = NULL;
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, arcpgu);
+	return 0;
+}
+
+int arcpgu_unload(struct drm_device *drm)
+{
+	struct arcpgu_drm_private *arcpgu = drm->dev_private;
+
+	if (arcpgu->fbdev) {
+		drm_fbdev_cma_fini(arcpgu->fbdev);
+		arcpgu->fbdev = NULL;
+	}
+	drm_kms_helper_poll_fini(drm);
+	drm_vblank_cleanup(drm);
+	drm_mode_config_cleanup(drm);
+
+	return 0;
+}
+
+static struct drm_driver arcpgu_drm_driver = {
+	.driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME |
+			   DRIVER_ATOMIC,
+	.preclose = arcpgu_preclose,
+	.lastclose = arcpgu_lastclose,
+	.name = "drm-arcpgu",
+	.desc = "ARC PGU Controller",
+	.date = "20160219",
+	.major = 1,
+	.minor = 0,
+	.patchlevel = 0,
+	.fops = &arcpgu_drm_ops,
+	.load = arcpgu_load,
+	.unload = arcpgu_unload,
+	.dumb_create = drm_gem_cma_dumb_create,
+	.dumb_map_offset = drm_gem_cma_dumb_map_offset,
+	.dumb_destroy = drm_gem_dumb_destroy,
+	.get_vblank_counter = drm_vblank_no_hw_counter,
+	.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+	.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+	.gem_free_object = drm_gem_cma_free_object,
+	.gem_vm_ops = &drm_gem_cma_vm_ops,
+	.gem_prime_export = drm_gem_prime_export,
+	.gem_prime_import = drm_gem_prime_import,
+	.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
+	.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+	.gem_prime_vmap = drm_gem_cma_prime_vmap,
+	.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
+	.gem_prime_mmap = drm_gem_cma_prime_mmap,
+};
+
+static int arcpgu_probe(struct platform_device *pdev)
+{
+	return drm_platform_init(&arcpgu_drm_driver, pdev);
+}
+
+static int arcpgu_remove(struct platform_device *pdev)
+{
+	struct drm_device *drm = dev_get_drvdata(&pdev->dev);
+
+	drm_put_dev(drm);
+
+	return 0;
+}
+
+static const struct of_device_id arcpgu_of_table[] = {
+	{.compatible = "snps,arcpgu"},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, arcpgu_of_table);
+
+static struct platform_driver arcpgu_platform_driver = {
+	.probe = arcpgu_probe,
+	.remove = arcpgu_remove,
+	.driver = {
+		   .name = "arcpgu",
+		   .owner = THIS_MODULE,
+		   .of_match_table = arcpgu_of_table,
+		   },
+};
+
+module_platform_driver(arcpgu_platform_driver);
+
+MODULE_AUTHOR("Carlos Palminha <[e-mail]");
+MODULE_DESCRIPTION("ARC PGU DRM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/arc/arcpgu_fbdev.c b/drivers/gpu/drm/arc/arcpgu_fbdev.c
new file mode 100644
index 0000000..6f67706
--- /dev/null
+++ b/drivers/gpu/drm/arc/arcpgu_fbdev.c
@@ -0,0 +1,245 @@ 
+/*
+ * ARC PGU DRM driver.
+ *
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+
+struct drm_fb_cma {
+	struct drm_framebuffer		fb;
+	struct drm_gem_cma_object	*obj[4];
+};
+
+struct drm_fbdev_cma {
+	struct drm_fb_helper	fb_helper;
+	struct drm_fb_cma	*fb;
+};
+
+static inline struct drm_fbdev_cma *to_fbdev_cma(struct drm_fb_helper *helper)
+{
+	return container_of(helper, struct drm_fbdev_cma, fb_helper);
+}
+
+static inline struct drm_fb_cma *to_fb_cma(struct drm_framebuffer *fb)
+{
+	return container_of(fb, struct drm_fb_cma, fb);
+}
+
+static void drm_fb_cma_destroy(struct drm_framebuffer *fb)
+{
+	struct drm_fb_cma *fb_cma = to_fb_cma(fb);
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		if (fb_cma->obj[i])
+			drm_gem_object_unreference_unlocked(&fb_cma->obj[i]->base);
+	}
+
+	drm_framebuffer_cleanup(fb);
+	kfree(fb_cma);
+}
+
+static int drm_fb_cma_create_handle(struct drm_framebuffer *fb,
+	struct drm_file *file_priv, unsigned int *handle)
+{
+	struct drm_fb_cma *fb_cma = to_fb_cma(fb);
+
+	return drm_gem_handle_create(file_priv,
+			&fb_cma->obj[0]->base, handle);
+}
+
+static struct drm_framebuffer_funcs drm_fb_cma_funcs = {
+	.destroy	= drm_fb_cma_destroy,
+	.create_handle	= drm_fb_cma_create_handle,
+};
+
+static struct drm_fb_cma *drm_fb_cma_alloc(struct drm_device *dev,
+	const struct drm_mode_fb_cmd2 *mode_cmd,
+	struct drm_gem_cma_object **obj,
+	unsigned int num_planes)
+{
+	struct drm_fb_cma *fb_cma;
+	int ret;
+	int i;
+
+	fb_cma = kzalloc(sizeof(*fb_cma), GFP_KERNEL);
+	if (!fb_cma)
+		return ERR_PTR(-ENOMEM);
+
+	drm_helper_mode_fill_fb_struct(&fb_cma->fb, mode_cmd);
+
+	for (i = 0; i < num_planes; i++)
+		fb_cma->obj[i] = obj[i];
+
+	ret = drm_framebuffer_init(dev, &fb_cma->fb, &drm_fb_cma_funcs);
+	if (ret) {
+		dev_err(dev->dev, "Failed to initialize framebuffer: %d\n", ret);
+		kfree(fb_cma);
+		return ERR_PTR(ret);
+	}
+
+	return fb_cma;
+}
+
+/*
+ * This function is the only reason to have a copy of drm_fbdev_cma_init()
+ * here in this driver.
+ *
+ * In its turn this mmap() is required to mark user-space page as non-cached
+ * because it is just a mirror or real hardware frame-buffer.
+ */
+static int arcpgu_mmap(struct fb_info *info, struct vm_area_struct *vma)
+{
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	return vm_iomap_memory(vma, info->fix.smem_start, info->fix.smem_len);
+}
+
+static struct fb_ops drm_fbdev_cma_ops = {
+	.owner		= THIS_MODULE,
+	.fb_mmap	= arcpgu_mmap,
+	.fb_fillrect	= drm_fb_helper_sys_fillrect,
+	.fb_copyarea	= drm_fb_helper_sys_copyarea,
+	.fb_imageblit	= drm_fb_helper_sys_imageblit,
+	.fb_check_var	= drm_fb_helper_check_var,
+	.fb_set_par	= drm_fb_helper_set_par,
+	.fb_blank	= drm_fb_helper_blank,
+	.fb_pan_display	= drm_fb_helper_pan_display,
+	.fb_setcmap	= drm_fb_helper_setcmap,
+};
+
+static int drm_fbdev_cma_create(struct drm_fb_helper *helper,
+	struct drm_fb_helper_surface_size *sizes)
+{
+	struct drm_fbdev_cma *fbdev_cma = to_fbdev_cma(helper);
+	struct drm_mode_fb_cmd2 mode_cmd = { 0 };
+	struct drm_device *dev = helper->dev;
+	struct drm_gem_cma_object *obj;
+	struct drm_framebuffer *fb;
+	unsigned int bytes_per_pixel;
+	unsigned long offset;
+	struct fb_info *fbi;
+	size_t size;
+	int ret;
+
+	DRM_DEBUG_KMS("surface width(%d), height(%d) and bpp(%d)\n",
+			sizes->surface_width, sizes->surface_height,
+			sizes->surface_bpp);
+
+	bytes_per_pixel = DIV_ROUND_UP(sizes->surface_bpp, 8);
+
+	mode_cmd.width = sizes->surface_width;
+	mode_cmd.height = sizes->surface_height;
+	mode_cmd.pitches[0] = sizes->surface_width * bytes_per_pixel;
+	mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
+		sizes->surface_depth);
+
+	size = mode_cmd.pitches[0] * mode_cmd.height;
+	obj = drm_gem_cma_create(dev, size);
+	if (IS_ERR(obj))
+		return -ENOMEM;
+
+	fbi = drm_fb_helper_alloc_fbi(helper);
+	if (IS_ERR(fbi)) {
+		ret = PTR_ERR(fbi);
+		goto err_gem_free_object;
+	}
+
+	fbdev_cma->fb = drm_fb_cma_alloc(dev, &mode_cmd, &obj, 1);
+	if (IS_ERR(fbdev_cma->fb)) {
+		dev_err(dev->dev, "Failed to allocate DRM framebuffer.\n");
+		ret = PTR_ERR(fbdev_cma->fb);
+		goto err_fb_info_destroy;
+	}
+
+	fb = &fbdev_cma->fb->fb;
+	helper->fb = fb;
+
+	fbi->par = helper;
+	fbi->flags = FBINFO_FLAG_DEFAULT;
+	fbi->fbops = &drm_fbdev_cma_ops;
+
+	drm_fb_helper_fill_fix(fbi, fb->pitches[0], fb->depth);
+	drm_fb_helper_fill_var(fbi, helper, sizes->fb_width, sizes->fb_height);
+
+	offset = fbi->var.xoffset * bytes_per_pixel;
+	offset += fbi->var.yoffset * fb->pitches[0];
+
+	dev->mode_config.fb_base = (resource_size_t)obj->paddr;
+	fbi->screen_base = obj->vaddr + offset;
+	fbi->fix.smem_start = (unsigned long)(obj->paddr + offset);
+	fbi->screen_size = size;
+	fbi->fix.smem_len = size;
+
+	return 0;
+
+err_fb_info_destroy:
+	drm_fb_helper_release_fbi(helper);
+err_gem_free_object:
+	dev->driver->gem_free_object(&obj->base);
+	return ret;
+}
+
+static const struct drm_fb_helper_funcs drm_fb_cma_helper_funcs = {
+	.fb_probe = drm_fbdev_cma_create,
+};
+
+struct drm_fbdev_cma *arcpgu_fbdev_cma_init(struct drm_device *dev,
+	unsigned int preferred_bpp, unsigned int num_crtc,
+	unsigned int max_conn_count)
+{
+	struct drm_fbdev_cma *fbdev_cma;
+	struct drm_fb_helper *helper;
+	int ret;
+
+	fbdev_cma = kzalloc(sizeof(*fbdev_cma), GFP_KERNEL);
+	if (!fbdev_cma) {
+		dev_err(dev->dev, "Failed to allocate drm fbdev.\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	helper = &fbdev_cma->fb_helper;
+
+	drm_fb_helper_prepare(dev, helper, &drm_fb_cma_helper_funcs);
+
+	ret = drm_fb_helper_init(dev, helper, num_crtc, max_conn_count);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to initialize drm fb helper.\n");
+		goto err_free;
+	}
+
+	ret = drm_fb_helper_single_add_all_connectors(helper);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to add connectors.\n");
+		goto err_drm_fb_helper_fini;
+
+	}
+
+	ret = drm_fb_helper_initial_config(helper, preferred_bpp);
+	if (ret < 0) {
+		dev_err(dev->dev, "Failed to set initial hw configuration.\n");
+		goto err_drm_fb_helper_fini;
+	}
+
+	return fbdev_cma;
+
+err_drm_fb_helper_fini:
+	drm_fb_helper_fini(helper);
+err_free:
+	kfree(fbdev_cma);
+
+	return ERR_PTR(ret);
+}
diff --git a/drivers/gpu/drm/arc/arcpgu_hdmi.c b/drivers/gpu/drm/arc/arcpgu_hdmi.c
new file mode 100644
index 0000000..7adafa3
--- /dev/null
+++ b/drivers/gpu/drm/arc/arcpgu_hdmi.c
@@ -0,0 +1,207 @@ 
+/*
+ * ARC PGU DRM driver.
+ *
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_encoder_slave.h>
+#include <drm/drm_atomic_helper.h>
+
+#include "arcpgu.h"
+
+struct arcpgu_drm_connector {
+	struct drm_connector connector;
+	struct drm_encoder_slave *encoder_slave;
+};
+
+static int arcpgu_drm_connector_get_modes(struct drm_connector *connector)
+{
+	const struct drm_encoder_slave_funcs *sfuncs;
+	struct drm_encoder_slave *slave;
+	struct arcpgu_drm_connector *con =
+		container_of(connector, struct arcpgu_drm_connector, connector);
+
+	slave = con->encoder_slave;
+	if (slave == NULL) {
+		dev_err(connector->dev->dev,
+			"connector_get_modes: cannot find slave encoder for connector\n");
+		return 0;
+	}
+
+	sfuncs = slave->slave_funcs;
+	if (sfuncs->get_modes == NULL)
+		return 0;
+
+	return sfuncs->get_modes(&slave->base, connector);
+}
+
+struct drm_encoder *
+arcpgu_drm_connector_best_encoder(struct drm_connector *connector)
+{
+	struct drm_encoder_slave *slave;
+	struct arcpgu_drm_connector *con =
+		container_of(connector, struct arcpgu_drm_connector, connector);
+
+	slave = con->encoder_slave;
+	if (slave == NULL) {
+		dev_err(connector->dev->dev,
+			"connector_best_encoder: cannot find slave encoder for connector\n");
+		return NULL;
+	}
+
+	return &slave->base;
+}
+
+static enum drm_connector_status
+arcpgu_drm_connector_detect(struct drm_connector *connector, bool force)
+{
+	enum drm_connector_status status = connector_status_unknown;
+	const struct drm_encoder_slave_funcs *sfuncs;
+	struct drm_encoder_slave *slave;
+
+	struct arcpgu_drm_connector *con =
+		container_of(connector, struct arcpgu_drm_connector, connector);
+
+	slave = con->encoder_slave;
+	if (slave == NULL) {
+		dev_err(connector->dev->dev,
+			"connector_detect: cannot find slave encoder for connector\n");
+		return status;
+	}
+
+	sfuncs = slave->slave_funcs;
+	if (sfuncs && sfuncs->detect)
+		return sfuncs->detect(&slave->base, connector);
+
+	dev_err(connector->dev->dev, "connector_detect: could not detect slave funcs\n");
+	return status;
+}
+
+static void arcpgu_drm_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_helper_funcs
+arcpgu_drm_connector_helper_funcs = {
+	.get_modes = arcpgu_drm_connector_get_modes,
+	.best_encoder = arcpgu_drm_connector_best_encoder,
+};
+
+static const struct drm_connector_funcs arcpgu_drm_connector_funcs = {
+	.dpms = drm_helper_connector_dpms,
+	.reset = drm_atomic_helper_connector_reset,
+	.detect = arcpgu_drm_connector_detect,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = arcpgu_drm_connector_destroy,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static struct drm_encoder_helper_funcs arcpgu_drm_encoder_helper_funcs = {
+	.dpms = drm_i2c_encoder_dpms,
+	.mode_fixup = drm_i2c_encoder_mode_fixup,
+	.mode_set = drm_i2c_encoder_mode_set,
+	.prepare = drm_i2c_encoder_prepare,
+	.commit = drm_i2c_encoder_commit,
+	.detect = drm_i2c_encoder_detect,
+};
+
+static struct drm_encoder_funcs arcpgu_drm_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+int arcpgu_drm_hdmi_init(struct drm_device *drm, struct device_node *np)
+{
+	struct arcpgu_drm_connector *arcpgu_connector;
+	struct drm_i2c_encoder_driver *driver;
+	struct drm_encoder_slave *encoder;
+	struct drm_connector *connector;
+	struct i2c_client *i2c_slave;
+	int ret;
+
+	encoder = devm_kzalloc(drm->dev, sizeof(*encoder), GFP_KERNEL);
+	if (encoder == NULL)
+		return -ENOMEM;
+
+	i2c_slave = of_find_i2c_device_by_node(np);
+	if (!i2c_slave || !i2c_get_clientdata(i2c_slave)) {
+		dev_err(drm->dev, "failed to find i2c slave encoder\n");
+		return -EPROBE_DEFER;
+	}
+
+	if (i2c_slave->dev.driver == NULL) {
+		dev_err(drm->dev, "failed to find i2c slave driver\n");
+		return -EPROBE_DEFER;
+	}
+
+	driver =
+	    to_drm_i2c_encoder_driver(to_i2c_driver(i2c_slave->dev.driver));
+	ret = driver->encoder_init(i2c_slave, drm, encoder);
+	if (ret) {
+		dev_err(drm->dev, "failed to initialize i2c encoder slave\n");
+		return ret;
+	}
+
+	encoder->base.possible_crtcs = 1;
+	encoder->base.possible_clones = 0;
+	ret = drm_encoder_init(drm, &encoder->base, &arcpgu_drm_encoder_funcs,
+			       DRM_MODE_ENCODER_TMDS, NULL);
+	if (ret)
+		return ret;
+
+	drm_encoder_helper_add(&encoder->base,
+			       &arcpgu_drm_encoder_helper_funcs);
+
+	arcpgu_connector = devm_kzalloc(drm->dev, sizeof(*arcpgu_connector),
+					GFP_KERNEL);
+	if (!arcpgu_connector) {
+		ret = -ENOMEM;
+		goto error_encoder_cleanup;
+	}
+
+	connector = &arcpgu_connector->connector;
+	drm_connector_helper_add(connector, &arcpgu_drm_connector_helper_funcs);
+	ret = drm_connector_init(drm, connector, &arcpgu_drm_connector_funcs,
+			DRM_MODE_CONNECTOR_HDMIA);
+	if (ret < 0) {
+		dev_err(drm->dev, "failed to initialize drm connector\n");
+		goto error_encoder_cleanup;
+	}
+
+	ret = drm_connector_register(connector);
+	if (ret < 0) {
+		dev_err(drm->dev, "failed to regiter DRM connector and helper funcs\n");
+		goto error_connector_cleanup;
+	}
+
+	ret = drm_mode_connector_attach_encoder(connector, &encoder->base);
+	if (ret < 0) {
+		dev_err(drm->dev, "could not attach connector to encoder\n");
+		drm_connector_unregister(connector);
+		goto error_connector_cleanup;
+	}
+
+	arcpgu_connector->encoder_slave = encoder;
+
+	return 0;
+
+error_connector_cleanup:
+	drm_connector_cleanup(connector);
+
+error_encoder_cleanup:
+	drm_encoder_cleanup(&encoder->base);
+	return ret;
+}
diff --git a/drivers/gpu/drm/arc/arcpgu_regs.h b/drivers/gpu/drm/arc/arcpgu_regs.h
new file mode 100644
index 0000000..f04165f
--- /dev/null
+++ b/drivers/gpu/drm/arc/arcpgu_regs.h
@@ -0,0 +1,36 @@ 
+/*
+ * ARC PGU DRM driver.
+ *
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _ARC_PGU_REGS_H_
+#define _ARC_PGU_REGS_H_
+
+#define ARCPGU_REG_CTRL		0x00
+#define ARCPGU_REG_STAT		0x04
+#define ARCPGU_REG_FMT		0x10
+#define ARCPGU_REG_HSYNC	0x14
+#define ARCPGU_REG_VSYNC	0x18
+#define ARCPGU_REG_ACTIVE	0x1c
+#define ARCPGU_REG_BUF0_ADDR	0x40
+#define ARCPGU_REG_STRIDE	0x50
+#define ARCPGU_REG_START_SET	0x84
+
+#define ARCPGU_REG_ID		0x3FC
+
+#define ARCPGU_CTRL_ENABLE_MASK	0x02
+#define ARCPGU_MODE_RGB888_MASK	0x04
+#define ARCPGU_STAT_BUSY_MASK	0x02
+
+#endif