Message ID | 1457942520-12859-3-git-send-email-wxt@rock-chips.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hello. On 3/14/2016 11:01 AM, Caesar Wang wrote: > This patch adds the following property for arc_emac. > > 1) phy-reset-gpios: > The phy-reset-gpio is an optional property for arc emac device tree boot. > Change the binding document to match the driver code. > > 2) phy-reset-duration: > Different boards may require different phy reset duration. Add property > phy-reset-duration for device tree probe, so that the boards that need > a longer reset duration can specify it in their device tree. > > Anyway, we can add the above property for arc emac. > > Signed-off-by: Caesar Wang <wxt@rock-chips.com> Could you have a look at drivers/net/ethernet/cadence/macb/? It seems to be the only driver which places the PHY's "reset-gpios" prop correctly, into the PHY subnode? I'm currently working on adding support of this prop into phylib... MBR, Sergei
Hi Sergei, ? 2016?03?16? 21:57, Sergei Shtylyov ??: > Hello. > > On 3/14/2016 11:01 AM, Caesar Wang wrote: > >> This patch adds the following property for arc_emac. >> >> 1) phy-reset-gpios: >> The phy-reset-gpio is an optional property for arc emac device tree >> boot. >> Change the binding document to match the driver code. >> >> 2) phy-reset-duration: >> Different boards may require different phy reset duration. Add property >> phy-reset-duration for device tree probe, so that the boards that need >> a longer reset duration can specify it in their device tree. >> >> Anyway, we can add the above property for arc emac. >> >> Signed-off-by: Caesar Wang <wxt@rock-chips.com> > > Could you have a look at drivers/net/ethernet/cadence/macb/? It > seems to be the only driver which places the PHY's "reset-gpios" prop > correctly, into the PHY subnode? I'm currently working on adding > support of this prop into phylib... I see the driver on now. /* Power up the PHY if there is a GPIO reset */ phy_node = of_get_next_available_child(np, NULL); if (phy_node) { int gpio = of_get_named_gpio(phy_node, "reset-gpios", 0); if (gpio_is_valid(gpio)) bp->reset_gpio = gpio_to_desc(gpio); gpiod_set_value(bp->reset_gpio, GPIOD_OUT_HIGH); } of_node_put(phy_node); ... Frankly, I don't like this way in device drivers. That's seem same with the /drivers/mmc/core/pwrseq_simple.c, power up the device. Is it not really reset hardware PHY from the gpio reset pin? Just power up. Of course, I hope to see and test it if you improve the PHY framework to support the phy reset.:-) --- Anyway, David had applied this series patches into net branch. Although the clock and dts patches should be applied into Heiko branch, I'm glad to see David's way. Heiko branch: https://git.kernel.org/cgit/linux/kernel/git/mmind/linux-rockchip.git/ I wish won't destory Heiko to merge in the future. -Caesar > > MBR, Sergei > > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip
diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt index a1d71eb..c73a0e9 100644 --- a/Documentation/devicetree/bindings/net/arc_emac.txt +++ b/Documentation/devicetree/bindings/net/arc_emac.txt @@ -7,6 +7,13 @@ Required properties: - max-speed: see ethernet.txt file in the same directory. - phy: see ethernet.txt file in the same directory. +Optional properties: +- phy-reset-gpios : Should specify the gpio for phy reset +- phy-reset-duration : Reset duration in milliseconds. Should present + only if property "phy-reset-gpios" is available. Missing the property + will have the duration be 1 millisecond. Numbers greater than 1000 are + invalid and 1 millisecond will be used instead. + Clock handling: The clock frequency is needed to calculate and set polling period of EMAC. It must be provided by one of:
This patch adds the following property for arc_emac. 1) phy-reset-gpios: The phy-reset-gpio is an optional property for arc emac device tree boot. Change the binding document to match the driver code. 2) phy-reset-duration: Different boards may require different phy reset duration. Add property phy-reset-duration for device tree probe, so that the boards that need a longer reset duration can specify it in their device tree. Anyway, we can add the above property for arc emac. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc; Alexander Kochetkov <al.kochet@gmail.com> --- Changes in v3: - As Sergei comments, the original name is better, so %s/reset-gpios/phy-reset-gpios - Add the Cc people. Changes in v2: - %s/phy-reset-gpios/reset-gpios Documentation/devicetree/bindings/net/arc_emac.txt | 7 +++++++ 1 file changed, 7 insertions(+)