@@ -187,7 +187,14 @@ config HAVE_OPTPROBES
config HAVE_KPROBES_ON_FTRACE
bool
+config HAVE_NMI
+ bool
+
+config NEED_PRINTK_NMI
+ bool
+
config HAVE_NMI_WATCHDOG
+ depends on HAVE_NMI
bool
#
# An arch should select this if it provides all these things:
@@ -63,6 +63,8 @@ config ARM
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_MEMBLOCK
select HAVE_MOD_ARCH_SPECIFIC
+ select HAVE_NMI if (!CPU_V7M)
+ select NEED_PRINTK_NMI if (CPU_V7M)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_OPTPROBES if !THUMB2_KERNEL
select HAVE_PERF_EVENTS
@@ -648,7 +648,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
case IPI_CPU_BACKTRACE:
irq_enter();
+ printk_nmi_enter();
nmi_cpu_backtrace(regs);
+ printk_nmi_exit();
irq_exit();
break;
@@ -17,6 +17,7 @@ config AVR32
select GENERIC_CLOCKEVENTS
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
+ select HAVE_NMI
help
AVR32 is a high-performance 32-bit RISC microprocessor core,
designed for cost-sensitive embedded applications, with particular
@@ -40,6 +40,7 @@ config BLACKFIN
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
select HAVE_DEBUG_STACKOVERFLOW
+ select HAVE_NMI
config GENERIC_CSUM
def_bool y
@@ -69,6 +69,7 @@ config CRIS
select GENERIC_CLOCKEVENTS if ETRAX_ARCH_V32
select GENERIC_SCHED_CLOCK if ETRAX_ARCH_V32
select HAVE_DEBUG_BUGVERBOSE if ETRAX_ARCH_V32
+ select HAVE_NMI
config HZ
int
@@ -63,6 +63,7 @@ config MIPS
select HAVE_IRQ_TIME_ACCOUNTING
select GENERIC_TIME_VSYSCALL
select ARCH_CLOCKSOURCE_DATA
+ select HAVE_NMI
menu "Machine selection"
@@ -7,6 +7,7 @@ config MN10300
select HAVE_ARCH_KGDB
select GENERIC_ATOMIC64
select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
+ select HAVE_NMI
select VIRT_TO_BUS
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
@@ -144,6 +144,8 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
nmi_count(smp_processor_id())++;
kstat_incr_irq_this_cpu(irq);
+ printk_nmi_enter();
+
for_each_online_cpu(cpu) {
sum = irq_stat[cpu].__irq_count;
@@ -198,6 +200,8 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep)
}
}
+ printk_nmi_exit();
+
WDCTR = wdt | WDCTR_WDRST;
tmp = WDCTR;
WDCTR = wdt | WDCTR_WDCNE;
@@ -537,8 +537,11 @@ void smp_nmi_call_function_interrupt(void)
*/
smp_mb();
cpumask_clear_cpu(smp_processor_id(), &nmi_call_data->started);
+ printk_nmi_enter();
+
(*func)(info);
+ printk_nmi_exit();
if (wait) {
smp_mb();
cpumask_clear_cpu(smp_processor_id(),
@@ -156,6 +156,7 @@ config PPC
select NO_BOOTMEM
select HAVE_GENERIC_RCU_GUP
select HAVE_PERF_EVENTS_NMI if PPC64
+ select HAVE_NMI if PERF_EVENTS
select EDAC_SUPPORT
select EDAC_ATOMIC_SCRUB
select ARCH_HAS_DMA_SET_COHERENT_MASK
@@ -159,6 +159,7 @@ config S390
select TTY
select VIRT_CPU_ACCOUNTING
select VIRT_TO_BUS
+ select HAVE_NMI
config SCHED_OMIT_FRAME_POINTER
@@ -44,6 +44,7 @@ config SUPERH
select OLD_SIGSUSPEND
select OLD_SIGACTION
select HAVE_ARCH_AUDITSYSCALL
+ select HAVE_NMI
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
@@ -80,6 +80,7 @@ config SPARC64
select NO_BOOTMEM
select HAVE_ARCH_AUDITSYSCALL
select ARCH_SUPPORTS_ATOMIC_RMW
+ select HAVE_NMI
config ARCH_DEFCONFIG
string
@@ -29,6 +29,7 @@ config TILE
select HAVE_DEBUG_STACKOVERFLOW
select ARCH_WANT_FRAME_POINTERS
select HAVE_CONTEXT_TRACKING
+ select HAVE_NMI if USE_PMC
select EDAC_SUPPORT
select GENERIC_STRNCPY_FROM_USER
select GENERIC_STRNLEN_USER
@@ -126,6 +126,7 @@ config X86
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_MIXED_BREAKPOINTS_REGS
+ select HAVE_NMI
select HAVE_OPROFILE
select HAVE_OPTPROBES
select HAVE_PCSPKR_PLATFORM
@@ -18,7 +18,6 @@
#include <linux/nmi.h>
#include <linux/module.h>
#include <linux/delay.h>
-#include <linux/seq_buf.h>
#ifdef CONFIG_HARDLOCKUP_DETECTOR
u64 hw_nmi_get_sample_period(int watchdog_thresh)
@@ -67,10 +67,12 @@ extern void irq_exit(void);
preempt_count_add(NMI_OFFSET + HARDIRQ_OFFSET); \
rcu_nmi_enter(); \
trace_hardirq_enter(); \
+ printk_nmi_enter(); \
} while (0)
#define nmi_exit() \
do { \
+ printk_nmi_exit(); \
trace_hardirq_exit(); \
rcu_nmi_exit(); \
BUG_ON(!in_nmi()); \
@@ -135,7 +135,4 @@ extern phys_addr_t per_cpu_ptr_to_phys(void *addr);
(typeof(type) __percpu *)__alloc_percpu(sizeof(type), \
__alignof__(type))
-/* To avoid include hell, as printk can not declare this, we declare it here */
-DECLARE_PER_CPU(printk_func_t, printk_func);
-
#endif /* __LINUX_PERCPU_H */
@@ -122,7 +122,17 @@ static inline __printf(1, 2) __cold
void early_printk(const char *s, ...) { }
#endif
-typedef __printf(1, 0) int (*printk_func_t)(const char *fmt, va_list args);
+#ifdef CONFIG_PRINTK_NMI
+extern void printk_nmi_init(void);
+extern void printk_nmi_enter(void);
+extern void printk_nmi_exit(void);
+extern void printk_nmi_flush(void);
+#else
+static inline void printk_nmi_init(void) { }
+static inline void printk_nmi_enter(void) { }
+static inline void printk_nmi_exit(void) { }
+static inline void printk_nmi_flush(void) { }
+#endif /* PRINTK_NMI */
#ifdef CONFIG_PRINTK
asmlinkage __printf(5, 0)
@@ -1456,6 +1456,11 @@ config PRINTK
very difficult to diagnose system problems, saying N here is
strongly discouraged.
+config PRINTK_NMI
+ def_bool y
+ depends on PRINTK
+ depends on HAVE_NMI || NEED_PRINTK_NMI
+
config BUG
bool "BUG() support" if EXPERT
default y
@@ -591,6 +591,7 @@ asmlinkage __visible void __init start_kernel(void)
timekeeping_init();
time_init();
sched_clock_postinit();
+ printk_nmi_init();
perf_event_init();
profile_init();
call_function_init();
@@ -1,2 +1,3 @@
obj-y = printk.o
+obj-$(CONFIG_PRINTK_NMI) += nmi.o
obj-$(CONFIG_A11Y_BRAILLE_CONSOLE) += braille.o
new file mode 100644
@@ -0,0 +1,202 @@
+/*
+ * nmi.c - Safe printk in NMI context
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/preempt.h>
+#include <linux/spinlock.h>
+#include <linux/smp.h>
+#include <linux/cpumask.h>
+#include <linux/irq_work.h>
+#include <linux/printk.h>
+
+#include "printk.h"
+
+/*
+ * printk() could not take logbuf_lock in NMI context. Instead,
+ * it uses an alternative implementation that temporary stores
+ * the strings into a per-CPU buffer. The content of the buffer
+ * is later flushed into the main ring buffer via IRQ work.
+ *
+ * The alternative implementation is chosen transparently
+ * via @printk_func per-CPU variable.
+ *
+ * The implementation allows to flush the strings also from another CPU.
+ * There are situations when we want to make sure that all buffers
+ * were handled or when IRQs are blocked.
+ */
+DEFINE_PER_CPU(printk_func_t, printk_func) = vprintk_default;
+
+struct nmi_seq_buf {
+ atomic_t len; /* length of written data */
+ struct irq_work work; /* IRQ work that flushes the buffer */
+ unsigned char buffer[PAGE_SIZE - sizeof(atomic_t) -
+ sizeof(struct irq_work)];
+};
+static DEFINE_PER_CPU(struct nmi_seq_buf, nmi_print_seq);
+
+/*
+ * Safe printk() for NMI context. It uses a per-CPU buffer to
+ * store the message. NMIs are not nested, so there is always only
+ * one writer running. But the buffer might get flushed from another
+ * CPU, so we need to be careful.
+ */
+static int vprintk_nmi(const char *fmt, va_list args)
+{
+ struct nmi_seq_buf *s = this_cpu_ptr(&nmi_print_seq);
+ int add = 0, len;
+
+again:
+ len = atomic_read(&s->len);
+
+ if (len >= sizeof(s->buffer))
+ return 0;
+
+ /*
+ * Make sure that all old data have been read before the buffer was
+ * reseted. This is not needed when we just append data.
+ */
+ if (!len)
+ smp_rmb();
+
+ add = vsnprintf(s->buffer + len, sizeof(s->buffer) - len, fmt, args);
+
+ /*
+ * Do it once again if the buffer has been flushed in the meantime.
+ * Note that atomic_cmpxchg() is an implicit memory barrier that
+ * makes sure that the data were written before updating s->len.
+ */
+ if (atomic_cmpxchg(&s->len, len, len + add) != len)
+ goto again;
+
+ /* Get flushed in a more safe context. */
+ if (add)
+ irq_work_queue(&s->work);
+
+ return add;
+}
+
+/*
+ * printk one line from the temporary buffer from @start index until
+ * and including the @end index.
+ */
+static void print_nmi_seq_line(struct nmi_seq_buf *s, int start, int end)
+{
+ const char *buf = s->buffer + start;
+
+ printk("%.*s", (end - start) + 1, buf);
+}
+
+/*
+ * Flush data from the associated per_CPU buffer. The function
+ * can be called either via IRQ work or independently.
+ */
+static void __printk_nmi_flush(struct irq_work *work)
+{
+ static raw_spinlock_t read_lock =
+ __RAW_SPIN_LOCK_INITIALIZER(read_lock);
+ struct nmi_seq_buf *s = container_of(work, struct nmi_seq_buf, work);
+ int len, size, i, last_i;
+
+ /*
+ * The lock has two functions. First, one reader has to flush all
+ * available message to make the lockless synchronization with
+ * writers easier. Second, we do not want to mix messages from
+ * different CPUs. This is especially important when printing
+ * a backtrace.
+ */
+ raw_spin_lock(&read_lock);
+
+ i = 0;
+more:
+ len = atomic_read(&s->len);
+
+ /*
+ * This is just a paranoid check that nobody has manipulated
+ * the buffer an unexpected way. If we printed something then
+ * @len must only increase.
+ */
+ WARN_ON(i && i >= len);
+
+ if (!len)
+ goto out; /* Someone else has already flushed the buffer. */
+
+ /* Make sure that data has been written up to the @len */
+ smp_rmb();
+
+ size = min_t(int, len, sizeof(s->buffer));
+ last_i = i;
+
+ /* Print line by line. */
+ for (; i < size; i++) {
+ if (s->buffer[i] == '\n') {
+ print_nmi_seq_line(s, last_i, i);
+ last_i = i + 1;
+ }
+ }
+ /* Check if there was a partial line. */
+ if (last_i < size) {
+ print_nmi_seq_line(s, last_i, size - 1);
+ pr_cont("\n");
+ }
+
+ /*
+ * Check that nothing has got added in the meantime and truncate
+ * the buffer. Note that atomic_cmpxchg() is an implicit memory
+ * barrier that makes sure that the data were copied before
+ * updating s->len.
+ */
+ if (atomic_cmpxchg(&s->len, len, 0) != len)
+ goto more;
+
+out:
+ raw_spin_unlock(&read_lock);
+}
+
+/**
+ * printk_nmi_flush - flush all per-cpu nmi buffers.
+ *
+ * The buffers are flushed automatically via IRQ work. This function
+ * is useful only when someone wants to be sure that all buffers have
+ * been flushed at some point.
+ */
+void printk_nmi_flush(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu)
+ __printk_nmi_flush(&per_cpu(nmi_print_seq, cpu).work);
+}
+
+void __init printk_nmi_init(void)
+{
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct nmi_seq_buf *s = &per_cpu(nmi_print_seq, cpu);
+
+ init_irq_work(&s->work, __printk_nmi_flush);
+ }
+}
+
+void printk_nmi_enter(void)
+{
+ this_cpu_write(printk_func, vprintk_nmi);
+}
+
+void printk_nmi_exit(void)
+{
+ this_cpu_write(printk_func, vprintk_default);
+}
@@ -54,6 +54,7 @@
#include "console_cmdline.h"
#include "braille.h"
+#include "printk.h"
int console_printk[4] = {
CONSOLE_LOGLEVEL_DEFAULT, /* console_loglevel */
@@ -1867,14 +1868,6 @@ int vprintk_default(const char *fmt, va_list args)
}
EXPORT_SYMBOL_GPL(vprintk_default);
-/*
- * This allows printk to be diverted to another function per cpu.
- * This is useful for calling printk functions from within NMI
- * without worrying about race conditions that can lock up the
- * box.
- */
-DEFINE_PER_CPU(printk_func_t, printk_func) = vprintk_default;
-
/**
* printk - print a kernel message
* @fmt: format string
@@ -1898,21 +1891,11 @@ DEFINE_PER_CPU(printk_func_t, printk_func) = vprintk_default;
*/
asmlinkage __visible int printk(const char *fmt, ...)
{
- printk_func_t vprintk_func;
va_list args;
int r;
va_start(args, fmt);
-
- /*
- * If a caller overrides the per_cpu printk_func, then it needs
- * to disable preemption when calling printk(). Otherwise
- * the printk_func should be set to the default. No need to
- * disable preemption here.
- */
- vprintk_func = this_cpu_read(printk_func);
r = vprintk_func(fmt, args);
-
va_end(args);
return r;
new file mode 100644
@@ -0,0 +1,44 @@
+/*
+ * printk.h - printk internal definitions
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/percpu.h>
+
+typedef __printf(1, 0) int (*printk_func_t)(const char *fmt, va_list args);
+
+int __printf(1, 0) vprintk_default(const char *fmt, va_list args);
+
+#ifdef CONFIG_PRINTK_NMI
+
+/*
+ * printk() could not take logbuf_lock in NMI context. Instead,
+ * it temporary stores the strings into a per-CPU buffer.
+ * The alternative implementation is chosen transparently
+ * via per-CPU variable.
+ */
+DECLARE_PER_CPU(printk_func_t, printk_func);
+static inline __printf(1, 0) int vprintk_func(const char *fmt, va_list args)
+{
+ return this_cpu_read(printk_func)(fmt, args);
+}
+
+#else /* CONFIG_PRINTK_NMI */
+
+static inline __printf(1, 0) int vprintk_func(const char *fmt, va_list args)
+{
+ return vprintk_default(fmt, args);
+}
+
+#endif /* CONFIG_PRINTK_NMI */
@@ -16,33 +16,14 @@
#include <linux/delay.h>
#include <linux/kprobes.h>
#include <linux/nmi.h>
-#include <linux/seq_buf.h>
#ifdef arch_trigger_all_cpu_backtrace
/* For reliability, we're prepared to waste bits here. */
static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-static cpumask_t printtrace_mask;
-
-#define NMI_BUF_SIZE 4096
-
-struct nmi_seq_buf {
- unsigned char buffer[NMI_BUF_SIZE];
- struct seq_buf seq;
-};
-
-/* Safe printing in NMI context */
-static DEFINE_PER_CPU(struct nmi_seq_buf, nmi_print_seq);
/* "in progress" flag of arch_trigger_all_cpu_backtrace */
static unsigned long backtrace_flag;
-static void print_seq_line(struct nmi_seq_buf *s, int start, int end)
-{
- const char *buf = s->buffer + start;
-
- printk("%.*s", (end - start) + 1, buf);
-}
-
/*
* When raise() is called it will be is passed a pointer to the
* backtrace_mask. Architectures that call nmi_cpu_backtrace()
@@ -52,8 +33,7 @@ static void print_seq_line(struct nmi_seq_buf *s, int start, int end)
void nmi_trigger_all_cpu_backtrace(bool include_self,
void (*raise)(cpumask_t *mask))
{
- struct nmi_seq_buf *s;
- int i, cpu, this_cpu = get_cpu();
+ int i, this_cpu = get_cpu();
if (test_and_set_bit(0, &backtrace_flag)) {
/*
@@ -68,17 +48,6 @@ void nmi_trigger_all_cpu_backtrace(bool include_self,
if (!include_self)
cpumask_clear_cpu(this_cpu, to_cpumask(backtrace_mask));
- cpumask_copy(&printtrace_mask, to_cpumask(backtrace_mask));
-
- /*
- * Set up per_cpu seq_buf buffers that the NMIs running on the other
- * CPUs will write to.
- */
- for_each_cpu(cpu, to_cpumask(backtrace_mask)) {
- s = &per_cpu(nmi_print_seq, cpu);
- seq_buf_init(&s->seq, s->buffer, NMI_BUF_SIZE);
- }
-
if (!cpumask_empty(to_cpumask(backtrace_mask))) {
pr_info("Sending NMI to %s CPUs:\n",
(include_self ? "all" : "other"));
@@ -94,73 +63,25 @@ void nmi_trigger_all_cpu_backtrace(bool include_self,
}
/*
- * Now that all the NMIs have triggered, we can dump out their
- * back traces safely to the console.
+ * Force flush any remote buffers that might be stuck in IRQ context
+ * and therefore could not run their irq_work.
*/
- for_each_cpu(cpu, &printtrace_mask) {
- int len, last_i = 0;
+ printk_nmi_flush();
- s = &per_cpu(nmi_print_seq, cpu);
- len = seq_buf_used(&s->seq);
- if (!len)
- continue;
-
- /* Print line by line. */
- for (i = 0; i < len; i++) {
- if (s->buffer[i] == '\n') {
- print_seq_line(s, last_i, i);
- last_i = i + 1;
- }
- }
- /* Check if there was a partial line. */
- if (last_i < len) {
- print_seq_line(s, last_i, len - 1);
- pr_cont("\n");
- }
- }
-
- clear_bit(0, &backtrace_flag);
- smp_mb__after_atomic();
+ clear_bit_unlock(0, &backtrace_flag);
put_cpu();
}
-/*
- * It is not safe to call printk() directly from NMI handlers.
- * It may be fine if the NMI detected a lock up and we have no choice
- * but to do so, but doing a NMI on all other CPUs to get a back trace
- * can be done with a sysrq-l. We don't want that to lock up, which
- * can happen if the NMI interrupts a printk in progress.
- *
- * Instead, we redirect the vprintk() to this nmi_vprintk() that writes
- * the content into a per cpu seq_buf buffer. Then when the NMIs are
- * all done, we can safely dump the contents of the seq_buf to a printk()
- * from a non NMI context.
- */
-static int nmi_vprintk(const char *fmt, va_list args)
-{
- struct nmi_seq_buf *s = this_cpu_ptr(&nmi_print_seq);
- unsigned int len = seq_buf_used(&s->seq);
-
- seq_buf_vprintf(&s->seq, fmt, args);
- return seq_buf_used(&s->seq) - len;
-}
-
bool nmi_cpu_backtrace(struct pt_regs *regs)
{
int cpu = smp_processor_id();
if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
- printk_func_t printk_func_save = this_cpu_read(printk_func);
-
- /* Replace printk to write into the NMI seq */
- this_cpu_write(printk_func, nmi_vprintk);
pr_warn("NMI backtrace for cpu %d\n", cpu);
if (regs)
show_regs(regs);
else
dump_stack();
- this_cpu_write(printk_func, printk_func_save);
-
cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
return true;
}