diff mbox

ARM: dts: rockchip: Add mdio node to ethernet node

Message ID 1458300056-6174-1-git-send-email-tomeu.vizoso@collabora.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tomeu Vizoso March 18, 2016, 11:20 a.m. UTC
So the dwmac device manages to probe again.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Fixes: 88f8b1bb41c6 ("stmmac: Fix 'eth0: No PHY found' regression")
---
 arch/arm/boot/dts/rk3288-rock2-som.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Andreas Färber March 18, 2016, 9:34 p.m. UTC | #1
Am 18.03.2016 um 12:20 schrieb Tomeu Vizoso:
> So the dwmac device manages to probe again.
> 
> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
> Fixes: 88f8b1bb41c6 ("stmmac: Fix 'eth0: No PHY found' regression")
> ---
>  arch/arm/boot/dts/rk3288-rock2-som.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
> index 1ece66f3e162..4ba7ddecb478 100644
> --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
> +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
> @@ -101,6 +101,14 @@
>  	snps,reset-delays-us = <0 10000 30000>;
>  	rx_delay = <0x10>;
>  	tx_delay = <0x30>;
> +	mdio0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +		ethphy1: ethernet-phy@1 {
> +			reg = <1>;
> +		};
> +	};

This is a) ugly for lack of white lines in between, b) unnecessary since
this is being fixed in the stmmac driver where it will benefit more than
just this one SoM.

Regards,
Andreas

>  };
>  
>  &i2c0 {
Tomeu Vizoso March 21, 2016, 8:23 a.m. UTC | #2
On 18 March 2016 at 22:34, Andreas Färber <afaerber@suse.de> wrote:
> Am 18.03.2016 um 12:20 schrieb Tomeu Vizoso:
>> So the dwmac device manages to probe again.
>>
>> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
>> Fixes: 88f8b1bb41c6 ("stmmac: Fix 'eth0: No PHY found' regression")
>> ---
>>  arch/arm/boot/dts/rk3288-rock2-som.dtsi | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
>> index 1ece66f3e162..4ba7ddecb478 100644
>> --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
>> +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
>> @@ -101,6 +101,14 @@
>>       snps,reset-delays-us = <0 10000 30000>;
>>       rx_delay = <0x10>;
>>       tx_delay = <0x30>;
>> +     mdio0 {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +             compatible = "snps,dwmac-mdio";
>> +             ethphy1: ethernet-phy@1 {
>> +                     reg = <1>;
>> +             };
>> +     };
>
> This is a) ugly for lack of white lines in between, b) unnecessary since
> this is being fixed in the stmmac driver where it will benefit more than
> just this one SoM.

So is this redundant information, or just not necessary with the
present kernel driver because of some assumption in its current
implementation?

Thanks,

Tomeu

> Regards,
> Andreas
>
>>  };
>>
>>  &i2c0 {
>
> --
> SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg)
Michael Nazzareno Trimarchi March 21, 2016, 8:32 a.m. UTC | #3
Hi

On Mon, Mar 21, 2016 at 9:23 AM, Tomeu Vizoso
<tomeu.vizoso@collabora.com> wrote:
> On 18 March 2016 at 22:34, Andreas Färber <afaerber@suse.de> wrote:
>> Am 18.03.2016 um 12:20 schrieb Tomeu Vizoso:
>>> So the dwmac device manages to probe again.
>>>
>>> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
>>> Fixes: 88f8b1bb41c6 ("stmmac: Fix 'eth0: No PHY found' regression")
>>> ---
>>>  arch/arm/boot/dts/rk3288-rock2-som.dtsi | 8 ++++++++
>>>  1 file changed, 8 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
>>> index 1ece66f3e162..4ba7ddecb478 100644
>>> --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
>>> +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
>>> @@ -101,6 +101,14 @@
>>>       snps,reset-delays-us = <0 10000 30000>;
>>>       rx_delay = <0x10>;
>>>       tx_delay = <0x30>;
>>> +     mdio0 {
>>> +             #address-cells = <1>;
>>> +             #size-cells = <0>;
>>> +             compatible = "snps,dwmac-mdio";
>>> +             ethphy1: ethernet-phy@1 {
>>> +                     reg = <1>;
>>> +             };
>>> +     };
>>
>> This is a) ugly for lack of white lines in between, b) unnecessary since
>> this is being fixed in the stmmac driver where it will benefit more than
>> just this one SoM.
>
> So is this redundant information, or just not necessary with the
> present kernel driver because of some assumption in its current
> implementation?
>

I have the same fix on my firefly tree. Look likes correct and describe the
connection

Michael

> Thanks,
>
> Tomeu
>
>> Regards,
>> Andreas
>>
>>>  };
>>>
>>>  &i2c0 {
>>
>> --
>> SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
>> GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg)
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
diff mbox

Patch

diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
index 1ece66f3e162..4ba7ddecb478 100644
--- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi
@@ -101,6 +101,14 @@ 
 	snps,reset-delays-us = <0 10000 30000>;
 	rx_delay = <0x10>;
 	tx_delay = <0x30>;
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
 };
 
 &i2c0 {