| Message ID | 1457436573-6180-7-git-send-email-julien.grall@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Mar 08, 2016 at 11:29:30AM +0000, Julien Grall wrote: > Fill up the recently introduced gic_kvm_info with the virtual GIC > information. this is not really virtual GIC information, it's information about the hardware used for virtualization. > > Signed-off-by: Julien Grall <julien.grall@arm.com> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Jason Cooper <jason@lakedaemon.net> > Cc: Marc Zyngier <marc.zyngier@arm.com> > > --- > Changes in v3: > - Add ACPI support > > Changes in v2: > - Use 0 rather than a negative value to know when the maintenance IRQ > is not present. > - Use resource for vcpu and vctrl > --- > drivers/irqchip/irq-gic-v3.c | 85 +++++++++++++++++++++++++++++++++- > include/linux/irqchip/arm-gic-common.h | 1 + > 2 files changed, 85 insertions(+), 1 deletion(-) > > diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c > index 50e87e6..6ae25120 100644 > --- a/drivers/irqchip/irq-gic-v3.c > +++ b/drivers/irqchip/irq-gic-v3.c > @@ -28,6 +28,7 @@ > #include <linux/slab.h> > > #include <linux/irqchip.h> > +#include <linux/irqchip/arm-gic-common.h> > #include <linux/irqchip/arm-gic-v3.h> > > #include <asm/cputype.h> > @@ -56,6 +57,8 @@ struct gic_chip_data { > static struct gic_chip_data gic_data __read_mostly; > static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE; > > +static struct gic_kvm_info gic_v3_kvm_info; > + > #define gic_data_rdist() (this_cpu_ptr(gic_data.rdists.rdist)) > #define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base) > #define gic_data_rdist_sgi_base() (gic_data_rdist_rd_base() + SZ_64K) > @@ -901,6 +904,37 @@ static int __init gic_validate_dist_version(void __iomem *dist_base) > return 0; > } > > +static void __init gic_of_setup_kvm_info(struct device_node *node) > +{ > + int ret; > + struct resource r; > + u32 gicv_idx; > + > + gic_v3_kvm_info.type = GIC_V3; > + > + gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0); > + > + if (of_property_read_u32(node, "#redistributor-regions", > + &gicv_idx)) > + gicv_idx = 1; > + > + gicv_idx += 3; /* Also skip GICD, GICC, GICH */ > + ret = of_address_to_resource(node, gicv_idx, &r); > + if (!ret) { > + if (!PAGE_ALIGNED(r.start)) > + pr_warn("GICV physical address 0x%llx not page aligned\n", > + (unsigned long long)r.start); > + else if (!PAGE_ALIGNED(resource_size(&r))) > + pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n", > + (unsigned long long)resource_size(&r), > + PAGE_SIZE); > + else > + gic_v3_kvm_info.vcpu = r; > + } > + > + gic_set_kvm_info(&gic_v3_kvm_info); I have the same error handling concerns as the previous patch here. > +} > + > static int __init gic_of_init(struct device_node *node, struct device_node *parent) > { > void __iomem *dist_base; > @@ -952,8 +986,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare > > err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions, > redist_stride, &node->fwnode); > - if (!err) > + if (!err) { > + gic_of_setup_kvm_info(node); > return 0; > + } > > out_unmap_rdist: > for (i = 0; i < nr_redist_regions; i++) > @@ -974,6 +1010,10 @@ static struct > struct redist_region *redist_regs; > u32 nr_redist_regions; > bool single_redist; > + u32 maint_irq; > + int maint_irq_mode; > + phys_addr_t vctrl_base; > + phys_addr_t vcpu_base; > } acpi_data __initdata; > > static void __init > @@ -1020,6 +1060,13 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header, > return -ENOMEM; > > gic_acpi_register_redist(gicc->gicr_base_address, redist_base); > + > + acpi_data.maint_irq = gicc->vgic_interrupt; > + acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ? > + ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE; > + acpi_data.vctrl_base = gicc->gich_base_address; > + acpi_data.vcpu_base = gicc->gicv_base_address; > + > return 0; > } > > @@ -1111,6 +1158,40 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header, > } > > #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K) > +#define ACPI_GICV2_VCTRL_MEM_SIZE (SZ_4K) > +#define ACPI_GICV2_VCPU_MEM_SIZE (SZ_8K) > + > +static void __init gic_acpi_setup_kvm_info(void) > +{ > + int irq; > + > + gic_v3_kvm_info.type = GIC_V3; > + > + irq = acpi_register_gsi(NULL, acpi_data.maint_irq, > + acpi_data.maint_irq_mode, > + ACPI_ACTIVE_HIGH); > + if (irq > 0) > + gic_v3_kvm_info.maint_irq = irq; > + > + if (acpi_data.vctrl_base) { > + struct resource *vctrl = &gic_v3_kvm_info.vctrl; > + > + vctrl->flags = IORESOURCE_MEM; > + vctrl->start = acpi_data.vctrl_base; > + vctrl->end = vctrl->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1; > + } > + > + if (acpi_data.vcpu_base) { > + struct resource *vcpu = &gic_v3_kvm_info.vcpu; > + > + vcpu->flags = IORESOURCE_MEM; > + vcpu->start = acpi_data.vcpu_base; > + vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1; > + } > + > + gic_set_kvm_info(&gic_v3_kvm_info); and here. > +} > + > > static int __init > gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end) > @@ -1159,6 +1240,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end) > goto out_fwhandle_free; > > acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle); > + gic_acpi_setup_kvm_info(); > + > return 0; > > out_fwhandle_free: > diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h > index f7723b9..15d68c6 100644 > --- a/include/linux/irqchip/arm-gic-common.h > +++ b/include/linux/irqchip/arm-gic-common.h > @@ -15,6 +15,7 @@ > > enum gic_type { > GIC_V2, > + GIC_V3, > }; > > struct gic_kvm_info { > -- > 1.9.1 > Thanks, -Christoffer -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Mar 08, 2016 at 11:29:30AM +0000, Julien Grall wrote: > Fill up the recently introduced gic_kvm_info with the virtual GIC > information. > > Signed-off-by: Julien Grall <julien.grall@arm.com> > Cc: Thomas Gleixner <tglx@linutronix.de> > Cc: Jason Cooper <jason@lakedaemon.net> > Cc: Marc Zyngier <marc.zyngier@arm.com> > > --- > Changes in v3: > - Add ACPI support > > Changes in v2: > - Use 0 rather than a negative value to know when the maintenance IRQ > is not present. > - Use resource for vcpu and vctrl > --- > drivers/irqchip/irq-gic-v3.c | 85 +++++++++++++++++++++++++++++++++- > include/linux/irqchip/arm-gic-common.h | 1 + > 2 files changed, 85 insertions(+), 1 deletion(-) > > diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c > index 50e87e6..6ae25120 100644 > --- a/drivers/irqchip/irq-gic-v3.c > +++ b/drivers/irqchip/irq-gic-v3.c > @@ -28,6 +28,7 @@ > #include <linux/slab.h> > > #include <linux/irqchip.h> > +#include <linux/irqchip/arm-gic-common.h> > #include <linux/irqchip/arm-gic-v3.h> > > #include <asm/cputype.h> > @@ -56,6 +57,8 @@ struct gic_chip_data { > static struct gic_chip_data gic_data __read_mostly; > static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE; > > +static struct gic_kvm_info gic_v3_kvm_info; > + > #define gic_data_rdist() (this_cpu_ptr(gic_data.rdists.rdist)) > #define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base) > #define gic_data_rdist_sgi_base() (gic_data_rdist_rd_base() + SZ_64K) > @@ -901,6 +904,37 @@ static int __init gic_validate_dist_version(void __iomem *dist_base) > return 0; > } > > +static void __init gic_of_setup_kvm_info(struct device_node *node) > +{ > + int ret; > + struct resource r; > + u32 gicv_idx; > + > + gic_v3_kvm_info.type = GIC_V3; > + > + gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0); > + > + if (of_property_read_u32(node, "#redistributor-regions", > + &gicv_idx)) > + gicv_idx = 1; > + > + gicv_idx += 3; /* Also skip GICD, GICC, GICH */ > + ret = of_address_to_resource(node, gicv_idx, &r); > + if (!ret) { > + if (!PAGE_ALIGNED(r.start)) > + pr_warn("GICV physical address 0x%llx not page aligned\n", > + (unsigned long long)r.start); > + else if (!PAGE_ALIGNED(resource_size(&r))) > + pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n", > + (unsigned long long)resource_size(&r), > + PAGE_SIZE); > + else > + gic_v3_kvm_info.vcpu = r; > + } > + > + gic_set_kvm_info(&gic_v3_kvm_info); > +} > + > static int __init gic_of_init(struct device_node *node, struct device_node *parent) > { > void __iomem *dist_base; > @@ -952,8 +986,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare > > err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions, > redist_stride, &node->fwnode); > - if (!err) > + if (!err) { > + gic_of_setup_kvm_info(node); > return 0; > + } > > out_unmap_rdist: > for (i = 0; i < nr_redist_regions; i++) > @@ -974,6 +1010,10 @@ static struct > struct redist_region *redist_regs; > u32 nr_redist_regions; > bool single_redist; > + u32 maint_irq; > + int maint_irq_mode; > + phys_addr_t vctrl_base; > + phys_addr_t vcpu_base; > } acpi_data __initdata; > > static void __init > @@ -1020,6 +1060,13 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header, > return -ENOMEM; > > gic_acpi_register_redist(gicc->gicr_base_address, redist_base); > + > + acpi_data.maint_irq = gicc->vgic_interrupt; > + acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ? > + ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE; > + acpi_data.vctrl_base = gicc->gich_base_address; > + acpi_data.vcpu_base = gicc->gicv_base_address; > + > return 0; > } Placing this here means that it will not collect the info in the case where there is a Generic Interrupt Redistributor structure in the MADT. I guess collecting this info should not be a side effect of happening to pass GICC for redistributor base. Which unfortuneately probably means we do need to parse the GICCs specifically for this information. Graeme > > @@ -1111,6 +1158,40 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header, > } > > #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K) > +#define ACPI_GICV2_VCTRL_MEM_SIZE (SZ_4K) > +#define ACPI_GICV2_VCPU_MEM_SIZE (SZ_8K) > + > +static void __init gic_acpi_setup_kvm_info(void) > +{ > + int irq; > + > + gic_v3_kvm_info.type = GIC_V3; > + > + irq = acpi_register_gsi(NULL, acpi_data.maint_irq, > + acpi_data.maint_irq_mode, > + ACPI_ACTIVE_HIGH); > + if (irq > 0) > + gic_v3_kvm_info.maint_irq = irq; > + > + if (acpi_data.vctrl_base) { > + struct resource *vctrl = &gic_v3_kvm_info.vctrl; > + > + vctrl->flags = IORESOURCE_MEM; > + vctrl->start = acpi_data.vctrl_base; > + vctrl->end = vctrl->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1; > + } > + > + if (acpi_data.vcpu_base) { > + struct resource *vcpu = &gic_v3_kvm_info.vcpu; > + > + vcpu->flags = IORESOURCE_MEM; > + vcpu->start = acpi_data.vcpu_base; > + vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1; > + } > + > + gic_set_kvm_info(&gic_v3_kvm_info); > +} > + > > static int __init > gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end) > @@ -1159,6 +1240,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end) > goto out_fwhandle_free; > > acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle); > + gic_acpi_setup_kvm_info(); > + > return 0; > > out_fwhandle_free: > diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h > index f7723b9..15d68c6 100644 > --- a/include/linux/irqchip/arm-gic-common.h > +++ b/include/linux/irqchip/arm-gic-common.h > @@ -15,6 +15,7 @@ > > enum gic_type { > GIC_V2, > + GIC_V3, > }; > > struct gic_kvm_info { > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Graeme, On 22/03/16 11:27, Graeme Gregory wrote: > On Tue, Mar 08, 2016 at 11:29:30AM +0000, Julien Grall wrote: >> @@ -1020,6 +1060,13 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header, >> return -ENOMEM; >> >> gic_acpi_register_redist(gicc->gicr_base_address, redist_base); >> + >> + acpi_data.maint_irq = gicc->vgic_interrupt; >> + acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ? >> + ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE; >> + acpi_data.vctrl_base = gicc->gich_base_address; >> + acpi_data.vcpu_base = gicc->gicv_base_address; >> + >> return 0; >> } > > Placing this here means that it will not collect the info in the case > where there is a Generic Interrupt Redistributor structure in the MADT. > > I guess collecting this info should not be a side effect of happening to > pass GICC for redistributor base. Which unfortuneately probably means we > do need to parse the GICCs specifically for this information. I noticed it while testing on some platform. It's now fixed and will be in the next version. Regards,
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index 50e87e6..6ae25120 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -28,6 +28,7 @@ #include <linux/slab.h> #include <linux/irqchip.h> +#include <linux/irqchip/arm-gic-common.h> #include <linux/irqchip/arm-gic-v3.h> #include <asm/cputype.h> @@ -56,6 +57,8 @@ struct gic_chip_data { static struct gic_chip_data gic_data __read_mostly; static struct static_key supports_deactivate = STATIC_KEY_INIT_TRUE; +static struct gic_kvm_info gic_v3_kvm_info; + #define gic_data_rdist() (this_cpu_ptr(gic_data.rdists.rdist)) #define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base) #define gic_data_rdist_sgi_base() (gic_data_rdist_rd_base() + SZ_64K) @@ -901,6 +904,37 @@ static int __init gic_validate_dist_version(void __iomem *dist_base) return 0; } +static void __init gic_of_setup_kvm_info(struct device_node *node) +{ + int ret; + struct resource r; + u32 gicv_idx; + + gic_v3_kvm_info.type = GIC_V3; + + gic_v3_kvm_info.maint_irq = irq_of_parse_and_map(node, 0); + + if (of_property_read_u32(node, "#redistributor-regions", + &gicv_idx)) + gicv_idx = 1; + + gicv_idx += 3; /* Also skip GICD, GICC, GICH */ + ret = of_address_to_resource(node, gicv_idx, &r); + if (!ret) { + if (!PAGE_ALIGNED(r.start)) + pr_warn("GICV physical address 0x%llx not page aligned\n", + (unsigned long long)r.start); + else if (!PAGE_ALIGNED(resource_size(&r))) + pr_warn("GICV size 0x%llx not a multiple of page size 0x%lx\n", + (unsigned long long)resource_size(&r), + PAGE_SIZE); + else + gic_v3_kvm_info.vcpu = r; + } + + gic_set_kvm_info(&gic_v3_kvm_info); +} + static int __init gic_of_init(struct device_node *node, struct device_node *parent) { void __iomem *dist_base; @@ -952,8 +986,10 @@ static int __init gic_of_init(struct device_node *node, struct device_node *pare err = gic_init_bases(dist_base, rdist_regs, nr_redist_regions, redist_stride, &node->fwnode); - if (!err) + if (!err) { + gic_of_setup_kvm_info(node); return 0; + } out_unmap_rdist: for (i = 0; i < nr_redist_regions; i++) @@ -974,6 +1010,10 @@ static struct struct redist_region *redist_regs; u32 nr_redist_regions; bool single_redist; + u32 maint_irq; + int maint_irq_mode; + phys_addr_t vctrl_base; + phys_addr_t vcpu_base; } acpi_data __initdata; static void __init @@ -1020,6 +1060,13 @@ gic_acpi_parse_madt_gicc(struct acpi_subtable_header *header, return -ENOMEM; gic_acpi_register_redist(gicc->gicr_base_address, redist_base); + + acpi_data.maint_irq = gicc->vgic_interrupt; + acpi_data.maint_irq_mode = (gicc->flags & ACPI_MADT_VGIC_IRQ_MODE) ? + ACPI_EDGE_SENSITIVE : ACPI_LEVEL_SENSITIVE; + acpi_data.vctrl_base = gicc->gich_base_address; + acpi_data.vcpu_base = gicc->gicv_base_address; + return 0; } @@ -1111,6 +1158,40 @@ static bool __init acpi_validate_gic_table(struct acpi_subtable_header *header, } #define ACPI_GICV3_DIST_MEM_SIZE (SZ_64K) +#define ACPI_GICV2_VCTRL_MEM_SIZE (SZ_4K) +#define ACPI_GICV2_VCPU_MEM_SIZE (SZ_8K) + +static void __init gic_acpi_setup_kvm_info(void) +{ + int irq; + + gic_v3_kvm_info.type = GIC_V3; + + irq = acpi_register_gsi(NULL, acpi_data.maint_irq, + acpi_data.maint_irq_mode, + ACPI_ACTIVE_HIGH); + if (irq > 0) + gic_v3_kvm_info.maint_irq = irq; + + if (acpi_data.vctrl_base) { + struct resource *vctrl = &gic_v3_kvm_info.vctrl; + + vctrl->flags = IORESOURCE_MEM; + vctrl->start = acpi_data.vctrl_base; + vctrl->end = vctrl->start + ACPI_GICV2_VCTRL_MEM_SIZE - 1; + } + + if (acpi_data.vcpu_base) { + struct resource *vcpu = &gic_v3_kvm_info.vcpu; + + vcpu->flags = IORESOURCE_MEM; + vcpu->start = acpi_data.vcpu_base; + vcpu->end = vcpu->start + ACPI_GICV2_VCPU_MEM_SIZE - 1; + } + + gic_set_kvm_info(&gic_v3_kvm_info); +} + static int __init gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end) @@ -1159,6 +1240,8 @@ gic_acpi_init(struct acpi_subtable_header *header, const unsigned long end) goto out_fwhandle_free; acpi_set_irq_model(ACPI_IRQ_MODEL_GIC, domain_handle); + gic_acpi_setup_kvm_info(); + return 0; out_fwhandle_free: diff --git a/include/linux/irqchip/arm-gic-common.h b/include/linux/irqchip/arm-gic-common.h index f7723b9..15d68c6 100644 --- a/include/linux/irqchip/arm-gic-common.h +++ b/include/linux/irqchip/arm-gic-common.h @@ -15,6 +15,7 @@ enum gic_type { GIC_V2, + GIC_V3, }; struct gic_kvm_info {
Fill up the recently introduced gic_kvm_info with the virtual GIC information. Signed-off-by: Julien Grall <julien.grall@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> --- Changes in v3: - Add ACPI support Changes in v2: - Use 0 rather than a negative value to know when the maintenance IRQ is not present. - Use resource for vcpu and vctrl --- drivers/irqchip/irq-gic-v3.c | 85 +++++++++++++++++++++++++++++++++- include/linux/irqchip/arm-gic-common.h | 1 + 2 files changed, 85 insertions(+), 1 deletion(-)